Linux headers might pull 'linux/stddef.h' which defines
'__always_inline' as the following:

   #ifndef __always_inline
   #define __always_inline inline
   #endif

This becomes an issue if the program picks up the 'linux/stddef.h'
definition as the macro now just hints inline to clang.

This change now enforces the proper definition for BPF programs
regardless of the include order.
Signed-off-by: Pedro Tammela <pctammela@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210314173839.457768-1-pctammela@gmail.com

Augment the current set of options that are accessible via
bpf_{g,s}etsockopt to also support SO_REUSEPORT.
Signed-off-by: Manu Bretelle <chantra@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210310182305.1910312-1-chantra@fb.com

Björn Töpel says:

====================

This series removes a header dependency from xsk.h, and moves
libbpf_util.h into xsk.h.

More details in each commit!

Thank you,
Björn
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

The only user of libbpf_util.h is xsk.h. Move the barriers to xsk.h,
and remove libbpf_util.h. The barriers are used as an implementation
detail, and should not be considered part of the stable API.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210310080929.641212-3-bjorn.topel@gmail.com

In commit 291471dd ("libbpf, xsk: Add libbpf_smp_store_release
libbpf_smp_load_acquire") linux/compiler.h was added as a dependency
to xsk.h, which is the user-facing API. This makes it harder for
userspace application to consume the library. Here the header
inclusion is removed, and instead {READ,WRITE}_ONCE() is added
explicitly.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210310080929.641212-2-bjorn.topel@gmail.com

Fix the following coccicheck warning:

./tools/testing/selftests/bpf/progs/fentry_test.c:67:12-13: WARNING
comparing pointer to 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1615360714-30381-1-git-send-email-jiapeng.chong@linux.alibaba.com

Fix the following coccicheck warning:

./tools/testing/selftests/bpf/progs/test_global_func10.c:17:12-13:
WARNING comparing pointer to 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1615357366-97612-1-git-send-email-jiapeng.chong@linux.alibaba.com

Alexei Starovoitov says:

====================
pull-request: bpf-next 2021-03-09

The following pull-request contains BPF updates for your *net-next* tree.

We've added 90 non-merge commits during the last 17 day(s) which contain
a total of 114 files changed, 5158 insertions(+), 1288 deletions(-).

The main changes are:

1) Faster bpf_redirect_map(), from Björn.

2) skmsg cleanup, from Cong.

3) Support for floating point types in BTF, from Ilya.

4) Documentation for sys_bpf commands, from Joe.

5) Support for sk_lookup in bpf_prog_test_run, form Lorenz.

6) Enable task local storage for tracing programs, from Song.

7) bpf_for_each_map_elem() helper, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.

 2) TX skb error handling fix in mt76 driver, also from Felix.

 3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.

 4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
    From Cong Wang.

 5) Use correct printf format for dma_addr_t in ath11k, from Geert
    Uytterhoeven.

 6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
    Hsieh.

 7) Don't report truncated frames to mac80211 in mt76 driver, from
    Lorenzop Bianconi.

 8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.

 9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.

10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
    Arjun Roy.

11) Ignore routes with deleted nexthop object in mlxsw, from Ido
    Schimmel.

12) Need to undo tcp early demux lookup sometimes in nf_nat, from
    Florian Westphal.

13) Fix gro aggregation for udp encaps with zero csum, from Daniel
    Borkmann.

14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
    Donenfeld.

15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.

16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.

17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
    Oltean.

18) Make sure textsearch copntrol block is large enough, from Wilem de
    Bruijn.

19) Revert MAC changes to r8152 leading to instability, from Hates Wang.

20) Advance iov in 9p even for empty reads, from Jissheng Zhang.

21) Double hook unregister in nftables, from PabloNeira Ayuso.

22) Fix memleak in ixgbe, fropm Dinghao Liu.

23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.

24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
    Tang.

25) Fix DOI refcount bugs in cipso, from Paul Moore.

26) One too many irqsave in ibmvnic, from Junlin Yang.

27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
    Balazs Nemeth.

* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
  s390/qeth: fix notification for pending buffers during teardown
  s390/qeth: schedule TX NAPI on QAOB completion
  s390/qeth: improve completion of pending TX buffers
  s390/qeth: fix memory leak after failed TX Buffer allocation
  net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
  net: check if protocol extracted by virtio_net_hdr_set_proto is correct
  net: dsa: xrs700x: check if partner is same as port in hsr join
  net: lapbether: Remove netif_start_queue / netif_stop_queue
  atm: idt77252: fix null-ptr-dereference
  atm: uPD98402: fix incorrect allocation
  atm: fix a typo in the struct description
  net: qrtr: fix error return code of qrtr_sendmsg()
  mptcp: fix length of ADD_ADDR with port sub-option
  net: bonding: fix error return code of bond_neigh_init()
  net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
  net: enetc: set MAC RX FIFO to recommended value
  net: davicom: Use platform_get_irq_optional()
  net: davicom: Fix regulator not turned off on driver removal
  net: davicom: Fix regulator not turned off on failed probe
  net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
  ...

Pull sparc fixes from David Miller:
 "Fix opcode filtering for exceptions, and clean up defconfig"

* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
  sparc: sparc64_defconfig: remove duplicate CONFIGs
  sparc64: Fix opcode filtering in handling of no fault loads

After my patch there is CONFIG_ATA defined twice.
Remove the duplicate one.
Same problem for CONFIG_HAPPYMEAL, except I added as builtin for boot
test with NFS.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: a57cdeb3 ("sparc: sparc64_defconfig: add necessary configs for qemu")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

is_no_fault_exception() has two bugs which were discovered via random
opcode testing with stress-ng. Both are caused by improper filtering
of opcodes.

The first bug can be triggered by a floating point store with a no-fault
ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode C1A01040.

The code first tests op3[5] (0x1000000), which denotes a floating
point instruction, and then tests op3[2] (0x200000), which denotes a
store instruction. But these bits are not mutually exclusive, and the
above mentioned opcode has both bits set. The intent is to filter out
stores, so the test for stores must be done first in order to have
any effect.

The second bug can be triggered by a floating point load with one of
the invalid ASI values 0x8e or 0x8f, which pass this check in
is_no_fault_exception():
     if ((asi & 0xf2) == ASI_PNF)

An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38",
opcode CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal
in handle_ldf_stq(), and is_no_fault_exception() must not allow these
invalid asi values to make it that far.

In both of these cases, handle_ldf_stq() reacts by calling
sun4v_data_access_exception() or spitfire_data_access_exception(),
which call is_no_fault_exception() and results in an infinite
recursion.
Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/qeth: fixes 2021-03-09

please apply the following patch series to netdev's net tree.

This brings one fix for a memleak in an error path of the setup code.
Also several fixes for dealing with pending TX buffers - two for old
bugs in their completion handling, and one recent regression in a
teardown path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The cited commit reworked the state machine for pending TX buffers.
In qeth_iqd_tx_complete() it turned PENDING into a transient state, and
uses NEED_QAOB for buffers that get parked while waiting for their QAOB
completion.

But it missed to adjust the check in qeth_tx_complete_buf(). So if
qeth_tx_complete_pending_bufs() is called during teardown to drain
the parked TX buffers, we no longer raise a notification for af_iucv.

Instead of updating the checked state, just move this code into
qeth_tx_complete_pending_bufs() itself. This also gets rid of the
special-case in the common TX completion path.

Fixes: 8908f36d ("s390/qeth: fix af_iucv notification race")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a QAOB notifies us that a pending TX buffer has been delivered, the
actual TX completion processing by qeth_tx_complete_pending_bufs()
is done within the context of a TX NAPI instance. We shouldn't rely on
this instance being scheduled by some other TX event, but just do it
ourselves.

qeth_qdio_handle_aob() is called from qeth_poll(), ie. our main NAPI
instance. To avoid touching the TX queue's NAPI instance
before/after it is (un-)registered, reorder the code in qeth_open()
and qeth_stop() accordingly.

Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current design attaches a pending TX buffer to a custom
single-linked list, which is anchored at the buffer's slot on the
TX ring. The buffer is then checked for final completion whenever
this slot is processed during a subsequent TX NAPI poll cycle.

But if there's insufficient traffic on the ring, we might never make
enough progress to get back to this ring slot and discover the pending
buffer's final TX completion. In particular if this missing TX
completion blocks the application from sending further traffic.

So convert the custom single-linked list code to a per-queue list_head,
and scan this list on every TX NAPI cycle.

Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When qeth_alloc_qdio_queues() fails to allocate one of the buffers that
back an Output Queue, the 'out_freeoutqbufs' path will free all
previously allocated buffers for this queue. But it misses to free the
half-finished queue struct itself.

Move the buffer allocation into qeth_alloc_output_queue(), and deal with
such errors internally.

Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Balazs Nemeth says:

====================
net: prevent infinite loop caused by incorrect proto from virtio_net_hdr_set_proto

These patches prevent an infinite loop for gso packets with a protocol
from virtio net hdr that doesn't match the protocol in the packet.
Note that packets coming from a device without
header_ops->parse_protocol being implemented will not be caught by
the check in virtio_net_hdr_to_skb, but the infinite loop will still
be prevented by the check in the gso layer.

Changes from v2 to v3:
  - Remove unused *eth.
  - Use MPLS_HLEN to also check if the MPLS header length is a multiple
    of four.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A packet with skb_inner_network_header(skb) == skb_network_header(skb)
and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers
from the packet. Subsequently, the call to skb_mac_gso_segment will
again call mpls_gso_segment with the same packet leading to an infinite
loop. In addition, ensure that the header length is a multiple of four,
which should hold irrespective of the number of stacked labels.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't
set) based on the type in the virtio net hdr, but the skb could contain
anything since it could come from packet_snd through a raw socket. If
there is a mismatch between what virtio_net_hdr_set_proto sets and
the actual protocol, then the skb could be handled incorrectly later
on.

An example where this poses an issue is with the subsequent call to
skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set
correctly. A specially crafted packet could fool
skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned.

Avoid blindly trusting the information provided by the virtio net header
by checking that the protocol in the packet actually matches the
protocol set by virtio_net_hdr_set_proto. Note that since the protocol
is only checked if skb->dev implements header_ops->parse_protocol,
packets from devices without the implementation are not checked at this
stage.

Fixes: 9274124f ("net: stricter validation of untrusted gso packets")
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Björn Töpel says:

====================
This two patch series contain two optimizations for the
bpf_redirect_map() helper and the xdp_do_redirect() function.

The bpf_redirect_map() optimization is about avoiding the map lookup
dispatching. Instead of having a switch-statement and selecting the
correct lookup function, we let bpf_redirect_map() be a map operation,
where each map has its own bpf_redirect_map() implementation. This way
the run-time lookup is avoided.

The xdp_do_redirect() patch restructures the code, so that the map
pointer indirection can be avoided.

Performance-wise I got 4% improvement for XSKMAP
(sample:xdpsock/rx-drop), and 8% (sample:xdp_redirect_map) on my
machine.

v5->v6:  Removed REDIR enum, and instead use map_id and map_type. (Daniel)
         Applied Daniel's fixups on patch 1. (Daniel)
v4->v5:  Renamed map operation to map_redirect. (Daniel)
v3->v4:  Made bpf_redirect_map() a map operation. (Daniel)
v2->v3:  Fix build when CONFIG_NET is not set. (lkp)
v1->v2:  Removed warning when CONFIG_BPF_SYSCALL was not set. (lkp)
         Cleaned up case-clause in xdp_do_generic_redirect_map(). (Toke)
         Re-added comment. (Toke)
rfc->v1: Use map_id, and remove bpf_clear_redirect_map(). (Toke)
         Get rid of the macro and use __always_inline. (Jesper)
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The XDP_REDIRECT implementations for maps and non-maps are fairly
similar, but obviously need to take different code paths depending on
if the target is using a map or not. Today, the redirect targets for
XDP either uses a map, or is based on ifindex.

Here, the map type and id are added to bpf_redirect_info, instead of
the actual map. Map type, map item/ifindex, and the map_id (if any) is
passed to xdp_do_redirect().

For ifindex-based redirect, used by the bpf_redirect() XDP BFP helper,
a special map type/id are used. Map type of UNSPEC together with map id
equal to INT_MAX has the special meaning of an ifindex based
redirect. Note that valid map ids are 1 inclusive, INT_MAX exclusive
([1,INT_MAX[).

In addition to making the code easier to follow, using explicit type
and id in bpf_redirect_info has a slight positive performance impact
by avoiding a pointer indirection for the map type lookup, and instead
use the cacheline for bpf_redirect_info.

Since the actual map is not passed via bpf_redirect_info anymore, the
map lookup is only done in the BPF helper. This means that the
bpf_clear_redirect_map() function can be removed. The actual map item
is RCU protected.

The bpf_redirect_info flags member is not used by XDP, and not
read/written any more. The map member is only written to when
required/used, and not unconditionally.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210308112907.559576-3-bjorn.topel@gmail.com

Currently the bpf_redirect_map() implementation dispatches to the
correct map-lookup function via a switch-statement. To avoid the
dispatching, this change adds bpf_redirect_map() as a map
operation. Each map provides its bpf_redirect_map() version, and
correct function is automatically selected by the BPF verifier.

A nice side-effect of the code movement is that the map lookup
functions are now local to the map implementation files, which removes
one additional function call.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210308112907.559576-2-bjorn.topel@gmail.com

Don't assign dp to partner if it's the same port that xrs700x_hsr_join
was called with. The partner port is supposed to be the other port in
the HSR/PRP redundant pair not the same port. This fixes an issue
observed in testing where forwarding between redundant HSR ports on this
switch didn't work depending on the order the ports were added to the
hsr device.

Fixes: bd62e6f5 ("net: dsa: xrs700x: add HSR offloading support")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add missing return type to BPF_KPROBE definition. Without it, compiler
generates the following warning:

progs/loop6.c:68:12: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
BPF_KPROBE(trace_virtqueue_add_sgs, void *unused, struct scatterlist **sgs,
           ^
1 warning generated.

Fixes: 86a35af6 ("selftests/bpf: Add a verifier scale test with unknown bounded loop")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210309044322.3487636-1-andrii@kernel.org

Pull gpio fixes from Bartosz Golaszewski:
 "A bunch of fixes for the GPIO subsystem. We have two regressions in
  the core code spotted right after the merge window, a series of fixes
  for ACPI GPIO and a subsequent fix for a related regression in
  gpio-pca953x + a minor tweak in .gitignore and a rework of handling of
  the gpio-line-names to remedy a regression in stm32mp151.

  Summary:

   - fix two regressions in core GPIO subsystem code: one NULL-pointer
     dereference and one list corruption

   - read GPIO line names from fwnode instead of using the generic
     device properties to fix a regression on stm32mp151

   - fixes to ACPI GPIO and gpio-pca953x to handle a regression in IRQ
     handling on Intel Galileo

   - update .gitignore in GPIO selftests"

* tag 'gpio-fixes-for-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: Read "gpio-line-names" from a firmware node
  gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2
  gpiolib: acpi: Allow to find GpioInt() resource by name and index
  gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk
  gpiolib: acpi: Add missing IRQF_ONESHOT
  gpio: fix gpio-device list corruption
  gpio: fix NULL-deref-on-deregistration regression
  selftests: gpio: update .gitignore

Pull MIPS fixes from Thomas Bogendoerfer:

 - fixes for boot breakage because of misaligned FDTs

 - fix for overwritten exception handlers

 - enable MIPS optimized crypto for all MIPS CPUs to improve wireguard
   performance

* tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: kernel: Reserve exception base early to prevent corruption
  MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes
  crypto: mips/poly1305 - enable for all MIPS processors
  MIPS: boot/compressed: Copy DTB to aligned address

For the devices in this driver, the default qdisc is "noqueue",
because their "tx_queue_len" is 0.

In function "__dev_queue_xmit" in "net/core/dev.c", devices with the
"noqueue" qdisc are specially handled. Packets are transmitted without
being queued after a "dev->flags & IFF_UP" check. However, it's possible
that even if this check succeeds, "ops->ndo_stop" may still have already
been called. This is because in "__dev_close_many", "ops->ndo_stop" is
called before clearing the "IFF_UP" flag.

If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in
"__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it
checks "netif_xmit_stopped" and finds that the queue is already stopped.
In this case, it will complain that:
"Virtual device ... asks to queue packet!"

To prevent "__dev_queue_xmit" from generating this complaint, we should
not call "netif_stop_queue" in "ops->ndo_stop".

We also don't need to call "netif_start_queue" in "ops->ndo_open",
because after a netdev is allocated and registered, the
"__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need
to call "netif_start_queue" to clear it.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ilya Leoshkevich says:

====================

The two tests here did not make it into the main BTF_KIND_FLOAT series
because of dependency on LLVM.

v0: https://lore.kernel.org/bpf/20210226202256.116518-10-iii@linux.ibm.com/
v1 -> v0: Per Alexei's suggestion, document the required LLVM commit.

v1: https://lore.kernel.org/bpf/20210305170844.151594-1-iii@linux.ibm.com/
v1 -> v2: Per Andrii's suggestions, use double in
          core_reloc_size___diff_sz and non-pointer member in
          btf_dump_test_case_syntax.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Check that dumping various floating-point types produces a valid C
code.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210309005649.162480-3-iii@linux.ibm.com

Verify that bpf_core_field_size() is working correctly with floats.
Also document the required clang version.
Suggested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210309005649.162480-2-iii@linux.ibm.com

BMIPS is one of the few platforms that do change the exception base.
After commit 2dcb3964 ("memblock: do not start bottom-up allocations
with kernel_end") we started seeing BMIPS boards fail to boot with the
built-in FDT being corrupted.

Before the cited commit, early allocations would be in the [kernel_end,
RAM_END] range, but after commit they would be within [RAM_START +
PAGE_SIZE, RAM_END].

The custom exception base handler that is installed by
bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the
memory region allocated by unflatten_and_copy_device_tree() thus
corrupting the FDT used by the kernel.

To fix this, we need to perform an early reservation of the custom
exception space. Additional we reserve the first 4k (1k for R3k) for
either normal exception vector space (legacy CPUs) or special vectors
like cache exceptions.

Huge thanks to Serge for analysing and proposing a solution to this
issue.

Fixes: 2dcb3964 ("memblock: do not start bottom-up allocations with kernel_end")
Reported-by: Kamal Dasu <kdasu.kdev@gmail.com>
Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Pull sparc updates from David Miller:
 "Just some more random bits from Al, including a conversion over to
  generic extables"

* git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc:
  sparc32: take ->thread.flags out
  sparc32: get rid of fake_swapper_regs
  sparc64: get rid of fake_swapper_regs
  sparc32: switch to generic extables
  sparc32: switch copy_user.S away from range exception table entries
  sparc32: get rid of range exception table entries in checksum_32.S
  sparc32: switch __bzero() away from range exception table entries
  sparc32: kill lookup_fault()
  sparc32: don't bother with lookup_fault() in __bzero()

this one is similar to the phy_data allocation fix in uPD98402, the
driver allocate the idt77105_priv and store to dev_data but later
dereference using dev->dev_data, which will cause null-ptr-dereference.

fix this issue by changing dev_data to phy_data so that PRIV(dev) can
work correctly.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this
dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock
(i.e dev->phy_data->lock) will result in a null-ptr-dereference.

I believe this is a typo and what it actually want to do is to allocate
phy_data instead of dev_data.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy_data means private PHY data not date
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When sock_alloc_send_skb() returns NULL to skb, no error return code of
qrtr_sendmsg() is assigned.
To fix this bug, rc is assigned with -ENOMEM in this case.

Fixes: 194ccc88 ("net: qrtr: Support decoding incoming v2 packets")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

in current Linux, MPTCP peers advertising endpoints with port numbers use
a sub-option length that wrongly accounts for the trailing TCP NOP. Also,
receivers will only process incoming ADD_ADDR with port having such wrong
sub-option length. Fix this, making ADD_ADDR compliant to RFC8684 §3.4.1.

this can be verified running tcpdump on the kselftests artifacts:

 unpatched kernel:
 [root@bottarga mptcp]# tcpdump -tnnr unpatched.pcap | grep add-addr
 reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535
 IP 10.0.1.1.10000 > 10.0.1.2.53078: Flags [.], ack 101, win 509, options [nop,nop,TS val 214459678 ecr 521312851,mptcp add-addr v1 id 1 a00:201:2774:2d88:7436:85c3:17fd:101], length 0
 IP 10.0.1.2.53078 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 521312852 ecr 214459678,mptcp add-addr[bad opt]]

 patched kernel:
 [root@bottarga mptcp]# tcpdump -tnnr patched.pcap | grep add-addr
 reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535
 IP 10.0.1.1.10000 > 10.0.1.2.38178: Flags [.], ack 101, win 509, options [nop,nop,TS val 3728873902 ecr 2732713192,mptcp add-addr v1 id 1 10.0.2.1:10100 hmac 0xbccdfcbe59292a1f,nop,nop], length 0
 IP 10.0.1.2.38178 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 2732713195 ecr 3728873902,mptcp add-addr v1-echo id 1 10.0.2.1:10100,nop,nop], length 0

Fixes: 22fb85ff ("mptcp: add port support for ADD_ADDR suboption writing")
CC: stable@vger.kernel.org # 5.11+
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When slave is NULL or slave_ops->ndo_neigh_setup is NULL, no error
return code of bond_neigh_init() is assigned.
To fix this bug, ret is assigned with -EINVAL in these cases.

Fixes: 9e99bfef ("bonding: fix bond_neigh_init()")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The txtime is passed to the driver in skb->skb_mstamp_ns, which is
actually in a union with skb->tstamp (the place where software
timestamps are kept).

Since commit b50a5c70 ("net: allow simultaneous SW and HW transmit
timestamping"), __sock_recv_timestamp has some logic for making sure
that the two calls to skb_tstamp_tx:

skb_tx_timestamp(skb) # Software timestamp in the driver
-> skb_tstamp_tx(skb, NULL)

and

skb_tstamp_tx(skb, &shhwtstamps) # Hardware timestamp in the driver

will both do the right thing and in a race-free manner, meaning that
skb_tx_timestamp will deliver a cmsg with the software timestamp only,
and skb_tstamp_tx with a non-NULL hwtstamps argument will deliver a cmsg
with the hardware timestamp only.

Why are races even possible? Well, because although the software timestamp
skb->tstamp is private per skb, the hardware timestamp skb_hwtstamps(skb)
lives in skb_shinfo(skb), an area which is shared between skbs and their
clones. And skb_tstamp_tx works by cloning the packets when timestamping
them, therefore attempting to perform hardware timestamping on an skb's
clone will also change the hardware timestamp of the original skb. And
the original skb might have been yet again cloned for software
timestamping, at an earlier stage.

So the logic in __sock_recv_timestamp can't be as simple as saying
"does this skb have a hardware timestamp? if yes I'll send the hardware
timestamp to the socket, otherwise I'll send the software timestamp",
precisely because the hardware timestamp is shared.
Instead, it's quite the other way around: __sock_recv_timestamp says
"does this skb have a software timestamp? if yes, I'll send the software
timestamp, otherwise the hardware one". This works because the software
timestamp is not shared with clones.

But that means we have a problem when we attempt hardware timestamping
with skbs that don't have the skb->tstamp == 0. __sock_recv_timestamp
will say "oh, yeah, this must be some sort of odd clone" and will not
deliver the hardware timestamp to the socket. And this is exactly what
is happening when we have txtime enabled on the socket: as mentioned,
that is put in a union with skb->tstamp, so it is quite easy to mistake
it.

Do what other drivers do (intel igb/igc) and write zero to skb->tstamp
before taking the hardware timestamp. It's of no use to us now (we're
already on the TX confirmation path).

Fixes: 0d08c9ec ("enetc: add support time specific departure base on the qos etf")
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>