- 10 Mar, 2018 25 commits
-
-
Tom Zanussi authored
Users should be able to directly specify event fields in hist trigger 'actions' rather than being forced to explicitly create a variable for that purpose. Add support allowing fields to be used directly in actions, which essentially does just that - creates 'invisible' variables for each bare field specified in an action. If a bare field refers to a field on another (matching) event, it even creates a special histogram for the purpose (since variables can't be defined on an existing histogram after histogram creation). Here's a simple example that demonstrates both. Basically the onmatch() action creates a list of variables corresponding to the parameters of the synthetic event to be generated, and then uses those values to generate the event. So for the wakeup_latency synthetic event 'call' below the first param, $wakeup_lat, is a variable defined explicitly on sched_switch, where 'next_pid' is just a normal field on sched_switch, and prio is a normal field on sched_waking. Since the mechanism works on variables, those two normal fields just have 'invisible' variables created internally for them. In the case of 'prio', which is on another event, we actually need to create an additional hist trigger and define the invisible variable on that, since once a hist trigger is defined, variables can't be added to it later. echo 'wakeup_latency u64 lat; pid_t pid; int prio' >> /sys/kernel/debug/tracing/synthetic_events echo 'hist:keys=pid:ts0=common_timestamp.usecs >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0: onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,prio) >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger Link: http://lkml.kernel.org/r/8e8dcdac1ea180ed7a3689e1caeeccede9dc42b3.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
Synthetic events are user-defined events generated from hist trigger variables saved from one or more other events. To define a synthetic event, the user writes a simple specification consisting of the name of the new event along with one or more variables and their type(s), to the tracing/synthetic_events file. For instance, the following creates a new event named 'wakeup_latency' with 3 fields: lat, pid, and prio: # echo 'wakeup_latency u64 lat; pid_t pid; int prio' >> \ /sys/kernel/debug/tracing/synthetic_events Reading the tracing/synthetic_events file lists all the currently-defined synthetic events, in this case the event we defined above: # cat /sys/kernel/debug/tracing/synthetic_events wakeup_latency u64 lat; pid_t pid; int prio At this point, the synthetic event is ready to use, and a histogram can be defined using it: # echo 'hist:keys=pid,prio,lat.log2:sort=pid,lat' >> \ /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger The new event is created under the tracing/events/synthetic/ directory and looks and behaves just like any other event: # ls /sys/kernel/debug/tracing/events/synthetic/wakeup_latency enable filter format hist id trigger Although a histogram can be defined for it, nothing will happen until an action tracing that event via the trace_synth() function occurs. The trace_synth() function is very similar to all the other trace_* invocations spread throughout the kernel, except in this case the trace_ function and its corresponding tracepoint isn't statically generated but defined by the user at run-time. How this can be automatically hooked up via a hist trigger 'action' is discussed in a subsequent patch. Link: http://lkml.kernel.org/r/c68df2284b7d172669daf9be29db62ad49bbc559.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Tom Zanussi authored
Add a hook for executing extra actions whenever a histogram entry is added or updated. The default 'action' when a hist entry is added to a histogram is to update the set of values associated with it. Some applications may want to perform additional actions at that point, such as generate another event, or compare and save a maximum. Add a simple framework for doing that; specific actions will be implemented on top of it in later patches. Link: http://lkml.kernel.org/r/9482ba6a3eaf5ca6e60954314beacd0e25c05b24.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Add the necessary infrastructure to allow the variables defined on one event to be referenced in another. This allows variables set by a previous event to be referenced and used in expressions combining the variable values saved by that previous event and the event fields of the current event. For example, here's how a latency can be calculated and saved into yet another variable named 'wakeup_lat': # echo 'hist:keys=pid,prio:ts0=common_timestamp ... # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp-$ts0 ... In the first event, the event's timetamp is saved into the variable ts0. In the next line, ts0 is subtracted from the second event's timestamp to produce the latency. Further users of variable references will be described in subsequent patches, such as for instance how the 'wakeup_lat' variable above can be displayed in a latency histogram. Link: http://lkml.kernel.org/r/b1d3e6975374e34d501ff417c20189c3f9b2c7b8.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: -
Tom Zanussi authored
Future support for synthetic events requires hist_field 'type' information, so add a field for that. Also, make other hist_field attribute usage consistent (size, is_signed, etc). Link: http://lkml.kernel.org/r/3fd12a2e86316b05151ba0d7c68268e780af2c9d.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Some accessor functions, such as for variable references, require access to a corrsponding tracing_map_elt. Add a tracing_map_elt param to the function signature and update the accessor functions accordingly. Link: http://lkml.kernel.org/r/e0f292b068e9e4948da1d5af21b5ae0efa9b5717.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Up until now, hist triggers only needed per-element support for saving 'comm' data, which was saved directly as a private data pointer. In anticipation of the need to save other data besides 'comm', add a new hist_elt_data struct for the purpose, and switch the current 'comm'-related code over to that. Link: http://lkml.kernel.org/r/4502c338c965ddf5fc19fb1ec4764391e001ed4b.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Add support for simple addition, subtraction, and unary expressions (-(expr) and expr, where expr = b-a, a+b, a+b+c) to hist triggers, in order to support a minimal set of useful inter-event calculations. These operations are needed for calculating latencies between events (timestamp1-timestamp0) and for combined latencies (latencies over 3 or more events). In the process, factor out some common code from key and value parsing. Link: http://lkml.kernel.org/r/9a9308ead4fe32a433d9c7e95921fb798394f6b2.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Move get_hist_field_flags() to make it more easily accessible for new code (and keep the move separate from new functionality). Link: http://lkml.kernel.org/r/32470f0a7047ec7a6e84ba5ec89d6142cc6ede7d.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Named triggers must also have the same set of variables in order to be considered compatible - update the trigger match test to account for that. The reason for this requirement is that named triggers with variables are meant to allow one or more events to set the same variable. Link: http://lkml.kernel.org/r/a17eae6328a99917f9d5c66129c9fcd355279ee9.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Add support for saving the value of a current event's event field by assigning it to a variable that can be read by a subsequent event. The basic syntax for saving a variable is to simply prefix a unique variable name not corresponding to any keyword along with an '=' sign to any event field. Both keys and values can be saved and retrieved in this way: # echo 'hist:keys=next_pid:vals=$ts0:ts0=common_timestamp ... # echo 'hist:timer_pid=common_pid:key=$timer_pid ...' If a variable isn't a key variable or prefixed with 'vals=', the associated event field will be saved in a variable but won't be summed as a value: # echo 'hist:keys=next_pid:ts1=common_timestamp:... Multiple variables can be assigned at the same time: # echo 'hist:keys=pid:vals=$ts0,$b,field2:ts0=common_timestamp,b=field1 ... Multiple (or single) variables can also be assigned at the same time using separate assignments: # echo 'hist:keys=pid:vals=$ts0:ts0=common_timestamp:b=field1:c=field2 ... Variables set as above can be used by being referenced from another event, as described in a subsequent patch. Link: http://lkml.kernel.org/r/fc93c4944d9719dbcb1d0067be627d44e98e2adc.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:Baohong Liu <baohong.liu@intel.com> Signed-off-by:
-
Tom Zanussi authored
Appending .usecs onto a common_timestamp field will cause the timestamp value to be in microseconds instead of the default nanoseconds. A typical latency histogram using usecs would look like this: # echo 'hist:keys=pid,prio:ts0=common_timestamp.usecs ... # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 ... This also adds an external trace_clock_in_ns() to trace.c for the timestamp conversion. Link: http://lkml.kernel.org/r/4e813705a170b3e13e97dc3135047362fb1a39f3.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Allow hist_data access via hist_field. Some users of hist_fields require or will require more access to the associated hist_data. Link: http://lkml.kernel.org/r/d04cd0768f5228ebb4ac0ba4a847bc4d14d4826f.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
In order to allow information to be passed between trace events, add support for per-element variables to tracing_map. This provides a means for histograms to associate a value or values with an entry when it's saved or updated, and retrieved by a subsequent event occurrences. Variables can be set using tracing_map_set_var() and read using tracing_map_read_var(). tracing_map_var_set() returns true or false depending on whether or not the variable has been set or not, which is important for event-matching applications. tracing_map_read_var_once() reads the variable and resets it to the 'unset' state, implementing read-once variables, which are also important for event-matching uses. Link: http://lkml.kernel.org/r/7fa001108252556f0c6dd9d63145eabfe3370d1a.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Add support for a timestamp event field. This is actually a 'pseudo-' event field in that it behaves like it's part of the event record, but is really part of the corresponding ring buffer event. To make use of the timestamp field, users can specify "common_timestamp" as a field name for any histogram. Note that this doesn't make much sense on its own either as either a key or value, but needs to be supported even so, since follow-on patches will add support for making use of this field in time deltas. The common_timestamp 'field' is not a bona fide event field - so you won't find it in the event description - but rather it's a synthetic field that can be used like a real field. Note that the use of this field requires the ring buffer be put into 'absolute timestamp' mode, which saves the complete timestamp for each event rather than an offset. This mode will be enabled if and only if a histogram makes use of the "common_timestamp" field. Link: http://lkml.kernel.org/r/97afbd646ed146e26271f3458b4b33e16d7817c2.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
Vedang Patel <vedang.patel@intel.com> Signed-off-by:
-
Tom Zanussi authored
This will make it easier to add variables, and makes the parsing code cleaner regardless. Link: http://lkml.kernel.org/r/e574b3291bbe15e35a4dfc87e5395aa715701c98.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
Rajvi Jingar <rajvi.jingar@intel.com> Signed-off-by:
-
Tom Zanussi authored
Some events such as timestamps require access to a ring_buffer_event struct; add a param so that hist field functions can access that. Link: http://lkml.kernel.org/r/2ff4af18e72b6002eb86b26b2a7f39cef7d1dfe4.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
The ring_buffer event can provide a timestamp that may be useful to various triggers - pass it into the handlers for that purpose. Link: http://lkml.kernel.org/r/6de592683b59fa70ffa5d43d0109896623fc1367.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Add a new option flag indicating whether or not the ring buffer is in 'absolute timestamp' mode. Currently this is only set/unset by hist triggers that make use of a common_timestamp. As such, there's no reason to make this writeable for users - its purpose is only to allow users to determine unequivocally whether or not the ring buffer is in that mode (although absolute timestamps can coexist with the normal delta timestamps, when the ring buffer is in absolute mode, timestamps written while absolute mode is in effect take up more space in the buffer, and are not as efficient). Link: http://lkml.kernel.org/r/e8aa7b1cde1cf15014e66545d06ac6ef2ebba456.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
RINGBUF_TYPE_TIME_STAMP is defined but not used, and from what I can gather was reserved for something like an absolute timestamp feature for the ring buffer, if not a complete replacement of the current time_delta scheme. This code redefines RINGBUF_TYPE_TIME_STAMP to implement absolute time stamps. Another way to look at it is that it essentially forces extended time_deltas for all events. The motivation for doing this is to enable time_deltas that aren't dependent on previous events in the ring buffer, making it feasible to use the ring_buffer_event timetamps in a more random-access way, for purposes other than serial event printing. To set/reset this mode, use tracing_set_timestamp_abs() from the previous interface patch. Link: http://lkml.kernel.org/r/477b362dba1ce7fab9889a1a8e885a62c472f041.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Define a new function, tracing_set_time_stamp_abs(), which can be used to enable or disable the use of absolute timestamps rather than time deltas for a trace array. Only the interface is added here; a subsequent patch will add the underlying implementation. Link: http://lkml.kernel.org/r/ce96119de44c7fe0ee44786d15254e9b493040d3.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Vedang Patel authored
We now have the logic to detect and remove duplicates in the tracing_map hash table. The code which merges duplicates in the histogram is redundant now. So, modify this code just to detect duplicates. The duplication detection code is still kept to ensure that any rare race condition which might cause duplicates does not go unnoticed. Link: http://lkml.kernel.org/r/55215cf59e2674391bdaf772fdafc4c393352b03.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Vedang Patel authored
A duplicate in the tracing_map hash table is when 2 different entries have the same key and, as a result, the key_hash. This is possible due to a race condition in the algorithm. This race condition is inherent to the algorithm and not a bug. This was fine because, until now, we were only interested in the sum of all the values related to a particular key (the duplicates are dealt with in tracing_map_sort_entries()). But, with the inclusion of variables[1], we are interested in individual values. So, it will not be clear what value to choose when there are duplicates. So, the duplicates need to be removed. The duplicates can occur in the code in the following scenarios: - A thread is in the process of adding a new element. It has successfully executed cmpxchg() and inserted the key. But, it is still not done acquiring the trace_map_elt struct, populating it and storing the pointer to the struct in the value field of tracing_map hash table. If another thread comes in at this time and wants to add an element with the same key, it will not see the current element and add a new one. - There are multiple threads trying to execute cmpxchg at the same time, one of the threads will succeed and the others will fail. The ones which fail will go ahead increment 'idx' and add a new element there creating a duplicate. This patch detects and avoids the first condition by asking the thread which detects the duplicate to loop one more time. There is also a possibility of infinite loop if the thread which is trying to insert goes to sleep indefinitely and the one which is trying to insert a new element detects a duplicate. Which is why, the thread loops for map_size iterations before returning NULL. The second scenario is avoided by preventing the threads which failed cmpxchg() from incrementing idx. This way, they will loop around and check if the thread which succeeded in executing cmpxchg() had the same key. [1] http://lkml.kernel.org/r/cover.1498510759.git.tom.zanussi@linux.intel.com Link: http://lkml.kernel.org/r/e178e89ec399240331d383bd5913d649713110f4.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Add a line for the log2 modifier, to keep it aligned with tracing/README. Link: http://lkml.kernel.org/r/a419028bccab155749a4b8702d5b97af75f1578f.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
The hist trigger Documentation takes up a large part of events.txt - since it will be getting even larger, move it to a separate file. Link: http://lkml.kernel.org/r/92761155ea4f529e590821b1e02207fe8619f248.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by:
-
- 04 Mar, 2018 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A small set of fixes for x86: - Add missing instruction suffixes to assembly code so it can be compiled by newer GAS versions without warnings. - Switch refcount WARN exceptions to UD2 as we did in general - Make the reboot on Intel Edison platforms work - A small documentation update so text and sample command match" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation, x86, resctrl: Make text and sample command match x86/platform/intel-mid: Handle Intel Edison reboot correctly x86/asm: Add instruction suffixes to bitops x86/entry/64: Add instruction suffix x86/refcounts: Switch to UD2 for exceptions -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/pti fixes from Thomas Gleixner: "Three fixes related to melted spectrum: - Sync the cpu_entry_area page table to initial_page_table on 32 bit. Otherwise suspend/resume fails because resume uses initial_page_table and triggers a triple fault when accessing the cpu entry area. - Zero the SPEC_CTL MRS on XEN before suspend to address a shortcoming in the hypervisor. - Fix another switch table detection issue in objtool" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table objtool: Fix another switch table detection issue x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A small set of fixes from the timer departement: - Add a missing timer wheel clock forward when migrating timers off a unplugged CPU to prevent operating on a stale clock base and missing timer deadlines. - Use the proper shift count to extract data from a register value to prevent evaluating unrelated bits - Make the error return check in the FSL timer driver work correctly. Checking an unsigned variable for less than zero does not really work well. - Clarify the confusing comments in the ARC timer code" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Forward timer base before migrating timers clocksource/drivers/arc_timer: Update some comments clocksource/drivers/mips-gic-timer: Use correct shift count to extract data clocksource/drivers/fsl_ftm_timer: Fix error return checking -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixlet from Thomas Gleixner: "Just a documentation update for the missing device tree property of the R-Car M3N interrupt controller" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings/irqchip/renesas-irqc: Document R-Car M3-N support
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - when NR_CPUS is large, a SRCU structure can significantly inflate size of the main filesystem structure that would not be possible to allocate by kmalloc, so the kvalloc fallback is used - improved error handling - fix endiannes when printing some filesystem attributes via sysfs, this is could happen when a filesystem is moved between different endianity hosts - send fixes: the NO_HOLE mode should not send a write operation for a file hole - fix log replay for for special files followed by file hardlinks - fix log replay failure after unlink and link combination - fix max chunk size calculation for DUP allocation * tag 'for-4.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix log replay failure after unlink and link combination Btrfs: fix log replay failure after linking special file and fsync Btrfs: send, fix issuing write op when processing hole in no data mode btrfs: use proper endianness accessors for super_copy btrfs: alloc_chunk: fix DUP stripe size handling btrfs: Handle btrfs_set_extent_delalloc failure in relocate_file_extent_cluster btrfs: handle failure of add_pending_csums btrfs: use kvzalloc to allocate btrfs_fs_info
-
- 03 Mar, 2018 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "A driver fix and a documentation fix (which makes dependency handling for the next cycle easier)" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: octeon: Prevent error message on bus error dt-bindings: at24: sort manufacturers alphabetically
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "A 4.16 regression fix, three fixes for -stable, and a cleanup fix: - During the merge window support for the new ACPI NVDIMM Platform Capabilities structure disabled support for "deep flush", a force-unit- access like mechanism for persistent memory. Restore that mechanism. - VFIO like RDMA is yet one more memory registration / pinning interface that is incompatible with Filesystem-DAX. Disable long term pins of Filesystem-DAX mappings via VFIO. - The Filesystem-DAX detection to prevent long terms pins mistakenly also disabled Device-DAX pins which are not subject to the same block- map collision concerns. - Similar to the setup path, softlockup warnings can trigger in the shutdown path for large persistent memory namespaces. Teach for_each_device_pfn() to perform cond_resched() in all cases. - Boaz noticed that the might_sleep() in dax_direct_access() is stale as of the v4.15 kernel. These have received a build success notification from the 0day robot, and the longterm pin fixes have appeared in -next. However, I recently rebased the tree to remove some other fixes that need to be reworked after review feedback. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: memremap: fix softlockup reports at teardown libnvdimm: re-enable deep flush for pmem devices via fsync() vfio: disable filesystem-dax page pinning dax: fix vma_is_fsdax() helper dax: ->direct_access does not sleep anymore -
Linus Torvalds authored
Merge tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - suppress sparse warnings about unknown attributes - fix typos and stale comments - fix build error of arch/sh - fix wrong use of ld-option vs cc-ldoption - remove redundant GCC_PLUGINS_CFLAGS assignment - fix another memory leak of Kconfig - fix line number in error messages of Kconfig - do not write confusing CONFIG_DEFCONFIG_LIST out to .config - add xstrdup() to Kconfig to handle memory shortage errors - show also a Debian package name if ncurses is missing * tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: MAINTAINERS: take over Kconfig maintainership kconfig: fix line number in recursive inclusion error message Coccinelle: memdup: Fix typo in warning messages kconfig: Update ncurses package names for menuconfig kbuild/kallsyms: trivial typo fix kbuild: test --build-id linker flag by ld-option instead of cc-ldoption kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment kconfig: Don't leak choice names during parsing sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list kconfig: add xstrdup() helper kbuild: disable sparse warnings about unknown attributes Makefile: Fix lying comment re. silentoldconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - some build fixes with randconfigs - an m88ds3103 fix to prevent an OOPS if the chip doesn't provide the right version during probe (with can happen if the hardware hangs) - a potential out of array bounds reference in tvp5150 - some fixes and improvements in the DVB memory mapped API (added for kernel 4.16) * tag 'media/v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: vb2: Makefile: place vb2-trace together with vb2-core media: Don't let tvp5150_get_vbi() go out of vbi_ram_default array media: dvb: update buffer mmaped flags and frame counter media: dvb: add continuity error indicators for memory mapped buffers media: dmxdev: Fix the logic that enables DMA mmap support media: dmxdev: fix error code for invalid ioctls media: m88ds3103: don't call a non-initalized function media: au0828: add VIDEO_V4L2 dependency media: dvb: fix DVB_MMAP dependency media: dvb: fix DVB_MMAP symbol name media: videobuf2: fix build issues with vb2-trace media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 part -
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fixes from Wim Van Sebroeck: - rave-sp: add NVMEM dependency - build fixes for i6300esb_wdt, xen_wdt and sp5100_tco * tag 'linux-watchdog-4.16-fixes-1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: sp5100_tco.c: fix potential build failure watchdog: xen_wdt: fix potential build failure watchdog: i6300esb: fix build failure watchdog: rave-sp: add NVMEM dependency
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "x86: - fix NULL dereference when using userspace lapic - optimize spectre v1 mitigations by allowing guests to use LFENCE - make microcode revision configurable to prevent guests from unnecessarily blacklisting spectre v2 mitigation feature" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix vcpu initialization with userspace lapic KVM: X86: Allow userspace to define the microcode version KVM: X86: Introduce kvm_get_msr_feature() KVM: SVM: Add MSR-based feature support for serializing LFENCE KVM: x86: Add a framework for supporting MSR-based features -
Dan Williams authored
The cond_resched() currently in the setup path needs to be duplicated in the teardown path. Rather than require each instance of for_each_device_pfn() to open code the same sequence, embed it in the helper. Link: https://github.com/intel/ixpdimm_sw/issues/11 Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Fixes: 71389703 ("mm, zone_device: Replace {get, put}_zone_device_page()...") Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dave Jiang authored
Re-enable deep flush so that users always have a way to be sure that a write makes it all the way out to media. Writes from the PMEM driver always arrive at the NVDIMM since movnt is used to bypass the cache, and the driver relies on the ADR (Asynchronous DRAM Refresh) mechanism to flush write buffers on power failure. The Deep Flush mechanism is there to explicitly write buffers to protect against (rare) ADR failure. This change prevents a regression in deep flush behavior so that applications can continue to depend on fsync() as a mechanism to trigger deep flush in the filesystem-DAX case. Fixes: 06e8ccda ("acpi: nfit: Add support for detect platform CPU cache...") Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
-
Masahiro Yamada authored
I have recently picked up Kconfig patches to my tree without any declaration. Making it official now. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
