- 19 Apr, 2019 1 commit
-
-
Saurav Kashyap authored
This patch clears FC_RP_STARTED flag during logoff, because of this re-login(flogi) didn't happen to the switch. This reverts commit 1550ec45. Fixes: 1550ec45 ("scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO") Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by:
Saurav Kashyap <skashyap@marvell.com> Reviewed-by:
Hannes Reinecke <hare@#suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
- 16 Apr, 2019 1 commit
-
-
Jaesoo Lee authored
When SCSI blk-mq is enabled, there is a bug in handling errors in scsi_queue_rq. Specifically, the bug is not setting result field of scsi_request correctly when the dispatch of the command has been failed. Since the upper layer code including the sg_io ioctl expects to receive any error status from result field of scsi_request, the error is silently ignored and this could cause data corruptions for some applications. Fixes: d285203c ("scsi: add support for a blk-mq based I/O path.") Cc: <stable@vger.kernel.org> Signed-off-by:
Jaesoo Lee <jalee@purestorage.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
- 09 Apr, 2019 1 commit
-
-
Varun Prakash authored
If scsi cmd sglist is not suitable for DDP then csiostor driver uses preallocated buffers for DDP, because of this data copy is required from DDP buffer to scsi cmd sglist before calling ->scsi_done(). Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
- 04 Apr, 2019 4 commits
-
-
James Smart authored
Abort thread wakeups, on some wqe types, are not happening. The thread wakeup logic is dependent upon the LPFC_DRIVER_ABORTED flag. However, on these wqes, the completion handler running prior to the io completion routine ends up clearing the flag. Rework the wakeup logic to look at a non-null waitq element which must be set if the abort thread is waiting. This is reverting the change in the indicated patch. Fixes: c2017260 ("scsi: lpfc: Rework locking on SCSI io completion") Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Michael Kelley authored
Reduce the default VMbus channel ring buffer size for storvsc SCSI devices from 1 Mbyte to 128 Kbytes. Measurements show that ring buffer sizes above 128 Kbytes do not increase performance even at very high IOPS rates, so don't waste the memory. Also remove the dependence on PAGE_SIZE, since the ring buffer size should not change on architectures where PAGE_SIZE is not 4 Kbytes. Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Michael Kelley authored
When the number of sub-channels offered by Hyper-V is >= the number of CPUs in the VM, calculate the correct number of sub-channels. The current code produces one too many. This scenario arises only when the number of CPUs is artificially restricted (for example, with maxcpus=<n> on the kernel boot line), because Hyper-V normally offers a sub-channel count < number of CPUs. While the current code doesn't break, the extra sub-channel is unbalanced across the CPUs (for example, a total of 5 channels on a VM with 4 CPUs). Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
Xose Vazquez Perez authored
Blacklist "Universal Xport" LUN. It's used for in-band storage array management. Also add model to the rdac dh family. Cc: Martin Wilck <mwilck@suse.com> Cc: Hannes Reinecke <hare@suse.de> Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com> Cc: Christophe Varoqui <christophe.varoqui@opensvc.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: DM ML <dm-devel@redhat.com> Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Reviewed-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
- 29 Mar, 2019 1 commit
-
-
Colin Ian King authored
The nvm_image is a large struct qedi_nvm_iscsi_image object of over 24K so don't declare it on the stack just for a sizeof requirement; use sizeof on struct qedi_nvm_iscsi_image instead. Fixes: c77a2fa3 ("scsi: qedi: Add the CRC size within iSCSI NVM image") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
- 28 Mar, 2019 10 commits
-
-
Tyrel Datwyler authored
No change to functionality. Simply make transport event messages a little clearer, and rework CRQ format enums such that we have separate enums for INIT messages and XPORT events. [mkp: typo] Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Tyrel Datwyler authored
Status and error codes are returned in big endian from the VIOS. The values are translated into a human readable format when logged, but the values are also logged. This patch byte swaps those values so that they are consistent between BE and LE platforms. Signed-off-by:
-
Tyrel Datwyler authored
The VIOS uses the SCSI_ERROR class to report PRLI failures. These errors are indicated with the combination of a IBMVFC_FC_SCSI_ERROR return status and 0x8000 error code. Add these codes to cmd_status[] with appropriate human readable error message. Signed-off-by:
-
Tyrel Datwyler authored
The text of messages logged with ibmvfc_log_error() always contain the term "failed". In the case of cancelled commands during EH they are reported back by the VIOS using error codes. This can be confusing to somebody looking at these log messages as to whether a command was successfully cancelled. The following real log message for example it is unclear if the transaction was actaully cancelled. <6>sd 0:0:1:1: Cancelling outstanding commands. <3>sd 0:0:1:1: [sde] Command (28) failed: transaction cancelled (2:6) flags: 0 fcp_rsp: 0, resid=0, scsi_status: 0 Remove prefixing of "failed" to all error logged messages. The ibmvfc_log_error() function translates the returned error/status codes to a human readable message already. Signed-off-by:
-
Steffen Maier authored
If an incoming ELS of type RSCN contains more than one element, zfcp suboptimally causes repeated erp trigger NOP trace records for each previously failed port. These could be ports that went away. It loops over each RSCN element, and for each of those in an inner loop over all zfcp_ports. The trigger to recover failed ports should be just the reception of some RSCN, no matter how many elements it has. So we can loop over failed ports separately, and only then loop over each RSCN element to handle the non-failed ports. The call chain was: zfcp_fc_incoming_rscn for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== In order the reduce the "flooding" of the REC trace area in such cases, we factor out handling the failed ports to be outside of the entries loop: zfcp_fc_incoming_rscn if (no_entries > 1) <=== list_for_each_entry(port, &adapter->port_list, list) <=== if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link Abbreviated example trace records before this code change: Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x02 Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x00 NOP => superfluous trace record The last trace entry repeats if there are more than 2 RSCN elements. Signed-off-by:Steffen Maier <maier@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Signed-off-by:
-
Steffen Maier authored
Suppose more than one non-NPIV FCP device is active on the same channel. Send I/O to storage and have some of the pending I/O run into a SCSI command timeout, e.g. due to bit errors on the fibre. Now the error situation stops. However, we saw FCP requests continue to timeout in the channel. The abort will be successful, but the subsequent TUR fails. Scsi_eh starts. The LUN reset fails. The target reset fails. The host reset only did an FCP device recovery. However, for non-NPIV FCP devices, this does not close and reopen ports on the SAN-side if other non-NPIV FCP device(s) share the same open ports. In order to resolve the continuing FCP request timeouts, we need to explicitly close and reopen ports on the SAN-side. This was missing since the beginning of zfcp in v2.6.0 history commit ea127f97 ("[PATCH] s390 (7/7): zfcp host adapter."). Note: The FSF requests for forced port reopen could run into FSF request timeouts due to other reasons. This would trigger an internal FCP device recovery. Pending forced port reopen recoveries would get dismissed. So some ports might not get fully reopened during this host reset handler. However, subsequent I/O would trigger the above described escalation and eventually all ports would be forced reopen to resolve any continuing FCP request timeouts due to earlier bit errors. Signed-off-by:
-
Steffen Maier authored
An already deleted SCSI device can exist on the Scsi_Host and remain there because something still holds a reference. A new SCSI device with the same H:C:T:L and FCP device, target port WWPN, and FCP LUN can be created. When we try to unblock an rport, we still find the deleted SCSI device and return early because the zfcp_scsi_dev of that SCSI device is not ZFCP_STATUS_COMMON_UNBLOCKED. Hence we miss to unblock the rport, even if the new proper SCSI device would be in good state. Therefore, skip deleted SCSI devices when iterating the sdevs of the shost. [cf. __scsi_device_lookup{_by_target}() or scsi_device_get()] The following abbreviated trace sequence can indicate such problem: Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 not ZFCP_STATUS_COMMON_UNBLOCKED Ready count : n not incremented yet Running count : 0x00000000 ERP want : 0x01 ERP need : 0xc1 ZFCP_ERP_ACTION_NONE Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x41000000 Ready count : n+1 Running count : 0x00000000 ERP want : 0x01 ERP need : 0x01 ... Area : REC Level : 4 only with increased trace level Tag : ertru_l LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 Request ID : 0x0000000000000000 ERP status : 0x01800000 ERP step : 0x1000 ERP action : 0x01 ERP count : 0x00 NOT followed by a trace record with tag "scpaddy" for WWPN 0x50050763031bd327. Signed-off-by: -
Martin K. Petersen authored
Commit a83da8a4 ("scsi: sd: Optimal I/O size should be a multiple of physical block size") split one conditional into several separate statements in an effort to provide more accurate warning messages when a device reports a nonsensical value. However, this reorganization accidentally dropped the precondition of the reported value being larger than zero. This lead to a warning getting emitted on devices that do not report an optimal I/O size at all. Remain silent if a device does not report an optimal I/O size. Fixes: a83da8a4 ("scsi: sd: Optimal I/O size should be a multiple of physical block size") Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> Reported-by:
Hussam Al-Tayeb <ht990332@gmx.com> Tested-by:
-
Bart Van Assche authored
The scsi_end_request() function calls scsi_cmd_to_driver() indirectly and hence needs the disk->private_data pointer. Avoid that that pointer is cleared before all affected I/O requests have finished. This patch avoids that the following crash occurs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: scsi_mq_uninit_cmd+0x1c/0x30 scsi_end_request+0x7c/0x1b8 scsi_io_completion+0x464/0x668 scsi_finish_command+0xbc/0x160 scsi_eh_flush_done_q+0x10c/0x170 sas_scsi_recover_host+0x84c/0xa98 [libsas] scsi_error_handler+0x140/0x5b0 kthread+0x100/0x12c ret_from_fork+0x10/0x18 Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Jason Yan <yanaijie@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
zhengbin authored
Use dd to test a SCSI device: 1. echo "blocked" >/sys/block/sda/device/state 2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10 3. echo "running" >/sys/block/sda/device/state dd should finish this work after step 3, but it hangs. After step2, the call chain is this: blk_mq_dispatch_rq_list-->scsi_queue_rq-->prep_to_mq prep_to_mq will return BLK_STS_RESOURCE, and scsi_queue_rq will transition it to BLK_STS_DEV_RESOURCE which means that driver can guarantee that IO dispatch will be triggered in future when the resource is available. Need to follow the rule if we set the device state to running. [mkp: tweaked commit description and code comment as suggested by Bart] Signed-off-by:
zhengbin <zhengbin13@huawei.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
- 26 Mar, 2019 3 commits
-
-
Kangjie Lu authored
In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Acked-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
Dave Carroll authored
There are a few windows during AER/EEH when we can access PCIe I/O mapped registers. This will harden the access to insure we do not allow PCIe access during errors Signed-off-by:
Dave Carroll <david.carroll@microsemi.com> Reviewed-by:
Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by:
-
Sreekanth Reddy authored
During expander reset handling, the driver invokes kernel function scsi_host_find_tag() to obtain outstanding requests associated with the scsi host managed by the driver. Driver loops from tag value zero to hba queue depth to obtain the outstanding scmds. But when blk-mq is enabled, the block layer may return stale entry for one or more requests. This may lead to kernel panic if the returned value is inaccessible or the memory pointed by the returned value is reused. Reference of upstream discussion: https://patchwork.kernel.org/patch/10734933/ Instead of calling scsi_host_find_tag() API for each and every smid (smid is tag +1) from one to shost->can_queue, now driver will call this API (to obtain the outstanding scmd) only for those smid's which are outstanding at the driver level. Driver will determine whether this smid is outstanding at driver level by looking into it's corresponding MPI request frame, if its MPI request frame is empty, then it means that this smid is free and does not need to call scsi_host_find_tag() for it. By doing this, driver will invoke scsi_host_find_tag() for only those tags which are outstanding at the driver level. Driver will check whether particular MPI request frame is empty or not by looking into the "DevHandle" field. If this field is zero then it means that this MPI request is empty. For active MPI request DevHandle must be non-zero. Also driver will memset the MPI request frame once the corresponding scmd is processed (i.e. just before calling scmd->done function). Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
- 21 Mar, 2019 2 commits
-
-
Tyrel Datwyler authored
The event pool used for queueing commands is destroyed fairly early in the ibmvscsi_remove() code path. Since, this happens prior to the call so scsi_remove_host() it is possible for further calls to queuecommand to be processed which manifest as a panic due to a NULL pointer dereference as seen here: PANIC: "Unable to handle kernel paging request for data at address 0x00000000" Context process backtrace: DSISR: 0000000042000000 ????Syscall Result: 0000000000000000 4 [c000000002cb3820] memcpy_power7 at c000000000064204 [Link Register] [c000000002cb3820] ibmvscsi_send_srp_event at d000000003ed14a4 5 [c000000002cb3920] ibmvscsi_send_srp_event at d000000003ed14a4 [ibmvscsi] ?(unreliable) 6 [c000000002cb39c0] ibmvscsi_queuecommand at d000000003ed2388 [ibmvscsi] 7 [c000000002cb3a70] scsi_dispatch_cmd at d00000000395c2d8 [scsi_mod] 8 [c000000002cb3af0] scsi_request_fn at d00000000395ef88 [scsi_mod] 9 [c000000002cb3be0] __blk_run_queue at c000000000429860 10 [c000000002cb3c10] blk_delay_work at c00000000042a0ec 11 [c000000002cb3c40] process_one_work at c0000000000dac30 12 [c000000002cb3cd0] worker_thread at c0000000000db110 13 [c000000002cb3d80] kthread at c0000000000e3378 14 [c000000002cb3e30] ret_from_kernel_thread at c00000000000982c The kernel buffer log is overfilled with this log: [11261.952732] ibmvscsi: found no event struct in pool! This patch reorders the operations during host teardown. Start by calling the SRP transport and Scsi_Host remove functions to flush any outstanding work and set the host offline. LLDD teardown follows including destruction of the event pool, freeing the Command Response Queue (CRQ), and unmapping any persistent buffers. The event pool destruction is protected by the scsi_host lock, and the pool is purged prior of any requests for which we never received a response. Finally, move the removal of the scsi host from our global list to the end so that the host is easily locatable for debugging purposes during teardown. Cc: <stable@vger.kernel.org> # v2.6.12+ Signed-off-by:
-
Tyrel Datwyler authored
For each ibmvscsi host created during a probe or destroyed during a remove we either add or remove that host to/from the global ibmvscsi_head list. This runs the risk of concurrent modification. This patch adds a simple spinlock around the list modification calls to prevent concurrent updates as is done similarly in the ibmvfc driver and ipr driver. Fixes: 32d6e4b6 ("scsi: ibmvscsi: add vscsi hosts to global list_head") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by:
-
- 20 Mar, 2019 1 commit
-
-
Luo Jiaxing authored
We found out that for v2 hw, a SATA disk can not be written to after the system comes up. In commit ffb1c820 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()"), we introduced a path where we may issue an internal abort for a SATA device, but without following it with a softreset. We need to always follow an internal abort with a software reset, as per HW programming flow, so add this. Fixes: ffb1c820 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()") Signed-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
- 19 Mar, 2019 4 commits
-
-
Himanshu Madhani authored
This patch fixes crash due to NULL pointer derefrence because CPU pointer is not set and used by driver. Instead, driver is passes CPU as tag via ha->isp_ops->{lun_reset|target_reset} [ 30.160780] qla2xxx [0000:a0:00.1]-8038:9: Cable is unplugged... [ 69.984045] qla2xxx [0000:a0:00.0]-8009:8: DEVICE RESET ISSUED nexus=8:0:0 cmd=00000000b0d62f46. [ 69.992849] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 70.000680] PGD 0 P4D 0 [ 70.003232] Oops: 0000 [#1] SMP PTI [ 70.006727] CPU: 2 PID: 6714 Comm: sg_reset Kdump: loaded Not tainted 4.18.0-67.el8.x86_64 #1 [ 70.015258] Hardware name: NEC Express5800/T110j [N8100-2758Y]/MX32-PH0-NJ, BIOS F11 02/13/2019 [ 70.024016] RIP: 0010:blk_mq_rq_cpu+0x9/0x10 [ 70.028315] Code: 01 58 01 00 00 48 83 c0 28 48 3d 80 02 00 00 75 ab c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 08 <8b> 40 40 c3 0f 1f 00 0f 1f 44 00 00 48 83 ec 10 48 c7 c6 20 6e 7c [ 70.047087] RSP: 0018:ffff99a481487d58 EFLAGS: 00010246 [ 70.052322] RAX: 0000000000000000 RBX: ffffffffc041b08b RCX: 0000000000000000 [ 70.059466] RDX: 0000000000000000 RSI: ffff8d10b6b16898 RDI: ffff8d10b341e400 [ 70.066615] RBP: ffffffffc03a6bd0 R08: 0000000000000415 R09: 0000000000aaaaaa [ 70.073765] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d10b341e528 [ 70.080914] R13: ffff8d10aadefc00 R14: ffff8d0f64efa998 R15: ffff8d0f64efa000 [ 70.088083] FS: 00007f90a201e540(0000) GS:ffff8d10b6b00000(0000) knlGS:0000000000000000 [ 70.096188] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 70.101959] CR2: 0000000000000040 CR3: 0000000268886005 CR4: 00000000003606e0 [ 70.109127] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 70.116277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 70.123425] Call Trace: [ 70.125896] __qla2xxx_eh_generic_reset+0xb1/0x220 [qla2xxx] [ 70.131572] scsi_ioctl_reset+0x1f5/0x2a0 [ 70.135600] scsi_ioctl+0x18e/0x397 [ 70.139099] ? sd_ioctl+0x7c/0x100 [sd_mod] [ 70.143287] blkdev_ioctl+0x32b/0x9f0 [ 70.146954] ? __check_object_size+0xa3/0x181 [ 70.151323] block_ioctl+0x39/0x40 [ 70.154735] do_vfs_ioctl+0xa4/0x630 [ 70.158322] ? syscall_trace_enter+0x1d3/0x2c0 [ 70.162769] ksys_ioctl+0x60/0x90 [ 70.166104] __x64_sys_ioctl+0x16/0x20 [ 70.169859] do_syscall_64+0x5b/0x1b0 [ 70.173532] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 70.178587] RIP: 0033:0x7f90a1b3445b [ 70.182183] Code: 0f 1e fa 48 8b 05 2d aa 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd a9 2c 00 f7 d8 64 89 01 48 [ 70.200956] RSP: 002b:00007fffdca88b68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 70.208535] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f90a1b3445b [ 70.215684] RDX: 00007fffdca88b84 RSI: 0000000000002284 RDI: 0000000000000003 [ 70.222833] RBP: 00007fffdca88ca8 R08: 00007fffdca88b84 R09: 0000000000000000 [ 70.229981] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffdca88b84 [ 70.237131] R13: 0000000000000000 R14: 000055ab09b0bd28 R15: 0000000000000000 [ 70.244284] Modules linked in: nft_chain_route_ipv4 xt_CHECKSUM nft_chain_nat_ipv4 ipt_MASQUERADE nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c ipt_REJECT nf_reject_ipv4 nft_counter nft_compat tun bridge stp llc nf_tables nfnetli nk devlink sunrpc vfat fat intel_rapl intel_pmc_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm wmi_bmof iTCO_wdt iTCO_ vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif intel_cstate intel_uncore intel_rapl_perf ipmi_si jo ydev pcspkr ipmi_devintf sg wmi ipmi_msghandler video acpi_power_meter acpi_pad mei_me i2c_i801 mei ip_tables ext4 mbcache jbd2 sr_mod cd rom sd_mod qla2xxx ast i2c_algo_bit drm_kms_helper nvme_fc syscopyarea sysfillrect uas sysimgblt fb_sys_fops nvme_fabrics ttm [ 70.314805] usb_storage nvme_core crc32c_intel scsi_transport_fc ahci drm libahci tg3 libata megaraid_sas pinctrl_cannonlake pinctrl_ intel [ 70.327335] CR2: 0000000000000040 Fixes: 9cf2bab6 ("block: kill request ->cpu member") Signed-off-by:Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Quinn Tran authored
Commit 7f147f9b ("scsi: qla2xxx: Fix N2N target discovery with Local loop") fixed N2N target discovery for local loop. However, same code is used for FC-AL discovery as well. Added check to make sure we are bypassing area and domain check only in N2N topology for target discovery. Fixes: 7f147f9b ("scsi: qla2xxx: Fix N2N target discovery with Local loop") Cc: stable@vger.kernel.org # 5.0+ Signed-off-by:
Quinn Tran <qtran@marvell.com> Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Bart Van Assche authored
Since scsi_device_quiesce() skips SCSI devices that have another state than RUNNING, OFFLINE or TRANSPORT_OFFLINE, scsi_device_resume() should not complain about SCSI devices that have been skipped. Hence this patch. This patch avoids that the following warning appears during resume: WARNING: CPU: 3 PID: 1039 at blk_clear_pm_only+0x2a/0x30 CPU: 3 PID: 1039 Comm: kworker/u8:49 Not tainted 5.0.0+ #1 Hardware name: LENOVO 4180F42/4180F42, BIOS 83ET75WW (1.45 ) 05/10/2013 Workqueue: events_unbound async_run_entry_fn RIP: 0010:blk_clear_pm_only+0x2a/0x30 Call Trace: ? scsi_device_resume+0x28/0x50 ? scsi_dev_type_resume+0x2b/0x80 ? async_run_entry_fn+0x2c/0xd0 ? process_one_work+0x1f0/0x3f0 ? worker_thread+0x28/0x3c0 ? process_one_work+0x3f0/0x3f0 ? kthread+0x10c/0x130 ? __kthread_create_on_node+0x150/0x150 ? ret_from_fork+0x1f/0x30 Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Martin Steigerwald <martin@lichtvoll.de> Cc: <stable@vger.kernel.org> Reported-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Tested-by:
-
Bart Van Assche authored
cmd->rcu is initialized by scsi_initialize_rq(). For passthrough requests, blk_get_request() calls scsi_initialize_rq(). For filesystem requests, scsi_init_command() calls scsi_initialize_rq(). Make sure that destroy_rcu_head() is called for passthrough requests. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reported-by:
-
- 18 Mar, 2019 1 commit
-
-
Maurizio Lombardi authored
In some cases, the iscsi_remove_session() function is called while an unbind_work operation is still running. This may cause a situation where sysfs objects are removed in an incorrect order, triggering a kernel warning. [ 605.249442] ------------[ cut here ]------------ [ 605.259180] sysfs group 'power' not found for kobject 'target2:0:0' [ 605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80 [ 605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi [ 605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1 [ 605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014 [ 605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi] [ 605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55 [ 606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286 [ 606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818 [ 606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007 [ 606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838 [ 606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000 [ 606.824707] FS: 0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000 [ 607.018333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0 [ 607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 607.524236] Call Trace: [ 607.530591] device_del+0x56/0x350 [ 607.624393] ? ata_tlink_match+0x30/0x30 [libata] [ 607.727805] ? attribute_container_device_trigger+0xb4/0xf0 [ 607.829911] scsi_target_reap_ref_release+0x39/0x50 [ 607.928572] scsi_remove_target+0x1a2/0x1d0 [ 608.017350] __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi] [ 608.117435] process_one_work+0x1a7/0x360 [ 608.132917] worker_thread+0x30/0x390 [ 608.222900] ? pwq_unbound_release_workfn+0xd0/0xd0 [ 608.323989] kthread+0x112/0x130 [ 608.418318] ? kthread_bind+0x30/0x30 [ 608.513821] ret_from_fork+0x35/0x40 [ 608.613909] ---[ end trace 0b98c310c8a6138c ]--- Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Chris Leech <cleech@redhat.com> Signed-off-by:
-
- 17 Mar, 2019 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 asm updates from Thomas Gleixner: "Two cleanup patches removing dead conditionals and unused code" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Remove unused __constant_c_x_memset() macro and inlines x86/asm: Remove dead __GNUC__ conditionals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Three fixes for the fallout from the TSX errata workaround: - Prevent memory corruption caused by a unchecked out of bound array index. - Two trivial fixes to address compiler warnings" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Make dev_attr_allow_tsx_force_abort static perf/x86: Fixup typo in stub functions perf/x86/intel: Fix memory corruption -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "A fix for a Xen bug introduced by David's series for excluding ballooned pages in vmcores" * tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Fix mapping PG_offline pages to user space
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: "Here is a 9p update for 5.1; there honestly hasn't been much. Two fixes (leak on invalid mount argument and possible deadlock on i_size update on 32bit smp) and a fall-through warning cleanup" * tag '9p-for-5.1' of git://github.com/martinetd/linux: 9p/net: fix memory leak in p9_client_create 9p: use inode->i_lock to protect i_size_write() under 32-bit 9p: mark expected switch fall-through
-
kbuild test robot authored
Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06
-
Masahiro Yamada authored
When this .gitignore was added, lxdialog was an independent hostprogs-y. Now that all objects in lxdialog/ are directly linked to mconf, the lxdialog is no longer generated. Signed-off-by:Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: -
Masahiro Yamada authored
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Douglas Anderson authored
This reverts commit caf6fe91. The commit was fine but is no longer needed as of commit 3a2429e1 ("kbuild: change if_changed_rule for multi-line recipe"). Let's go back to using ";" to be consistent. For some discussion, see: https://lkml.kernel.org/r/CAK7LNASde0Q9S5GKeQiWhArfER4S4wL1=R_FW8q0++_X3T5=hQ@mail.gmail.comSigned-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
