- 16 Feb, 2018 40 commits
-
-
Bradley Bolen authored
commit 7f29ae9f upstream. This fixes a race with idr_alloc where gd->first_minor can be set to the same value for two simultaneous calls to ubiblock_create. Each instance calls device_add_disk with the same first_minor. device_add_disk calls bdi_register_owner which generates several warnings. WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/devices/virtual/bdi/252:2' WARNING: CPU: 1 PID: 179 at kernel-source/lib/kobject.c:240 kobject_add_internal+0x1ec/0x2f8 kobject_add_internal failed for 252:2 with -EEXIST, don't try to register things with the same name in the same directory WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/dev/block/252:2' However, device_add_disk does not error out when bdi_register_owner returns an error. Control continues until reaching blk_register_queue. It then BUGs. kernel BUG at kernel-source/fs/sysfs/group.c:113! [<c01e26cc>] (internal_create_group) from [<c01e2950>] (sysfs_create_group+0x20/0x24) [<c01e2950>] (sysfs_create_group) from [<c00e3d38>] (blk_trace_init_sysfs+0x18/0x20) [<c00e3d38>] (blk_trace_init_sysfs) from [<c02bdfbc>] (blk_register_queue+0xd8/0x154) [<c02bdfbc>] (blk_register_queue) from [<c02cec84>] (device_add_disk+0x194/0x44c) [<c02cec84>] (device_add_disk) from [<c0436ec8>] (ubiblock_create+0x284/0x2e0) [<c0436ec8>] (ubiblock_create) from [<c0427bb8>] (vol_cdev_ioctl+0x450/0x554) [<c0427bb8>] (vol_cdev_ioctl) from [<c0189110>] (vfs_ioctl+0x30/0x44) [<c0189110>] (vfs_ioctl) from [<c01892e0>] (do_vfs_ioctl+0xa0/0x790) [<c01892e0>] (do_vfs_ioctl) from [<c0189a14>] (SyS_ioctl+0x44/0x68) [<c0189a14>] (SyS_ioctl) from [<c0010640>] (ret_fast_syscall+0x0/0x34) Locking idr_alloc/idr_remove removes the race and keeps gd->first_minor unique. Fixes: 2bf50d42 ("UBI: block: Dynamically allocate minor numbers") Signed-off-by:
Bradley Bolen <bradleybolen@gmail.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miquel Raynal authored
commit f4c6cd1a upstream. When the requested ECC strength does not exactly match the strengths supported by the ECC engine, the driver is selecting the closest strength meeting the 'selected_strength > requested_strength' constraint. Fix the fact that, in this particular case, ecc->strength value was not updated to match the 'selected_strength'. For instance, one can encounter this issue when no ECC requirement is filled in the device tree while the NAND chip minimum requirement is not a strength/step_size combo natively supported by the ECC engine. Fixes: 1fef62c1 ("mtd: nand: add sunxi NAND flash controller support") Suggested-by:
Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by:
-
Miquel Raynal authored
commit 87e89ce8 upstream. Starting from commit 041e4575 ("mtd: nand: handle ECC errors in OOB"), nand_do_read_oob() (from the NAND core) did return 0 or a negative error, and the MTD layer expected it. However, the trend for the NAND layer is now to return an error or a positive number of bitflips. Deciding which status to return to the user belongs to the MTD layer. Commit e47f6858 ("mtd: check for max_bitflips in mtd_read_oob()") brought this logic to the mtd_read_oob() function while the return value coming from nand_do_read_oob() (called by the ->_read_oob() hook) was left unchanged. Fixes: e47f6858 ("mtd: check for max_bitflips in mtd_read_oob()") Signed-off-by:
-
Kamal Dasu authored
commit f953f0f8 upstream. Brcm nand controller prefetch feature needs to be disabled by default. Enabling affects performance on random reads as well as dma reads. Signed-off-by:
Kamal Dasu <kdasu.kdev@gmail.com> Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit 9e343e87 upstream. The map_word_() functions, dating back to linux-2.6.8, try to perform bitwise operations on a 'map_word' structure. This may have worked with compilers that were current then (gcc-3.4 or earlier), but end up being rather inefficient on any version I could try now (gcc-4.4 or higher). Specifically we hit a problem analyzed in gcc PR81715 where we fail to reuse the stack space for local variables. This can be seen immediately in the stack consumption for cfi_staa_erase_varsize() and other functions that (with CONFIG_KASAN) can be up to 2200 bytes. Changing the inline functions into macros brings this down to 1280 bytes. Without KASAN, the same problem exists, but the stack consumption is lower to start with, my patch shrinks it from 920 to 496 bytes on with arm-linux-gnueabi-gcc-5.4, and saves around 1KB in .text size for cfi_cmdset_0020.c, as it avoids copying map_word structures for each call to one of these helpers. With the latest gcc-8 snapshot, the problem is fixed in upstream gcc, but nobody uses that yet, so we should still work around it in mainline kernels and probably backport the workaround to stable kernels as well. We had a couple of other functions that suffered from the same gcc bug, and all of those had a simpler workaround involving dummy variables in the inline function. Unfortunately that did not work here, the macro hack was the best I could come up with. It would also be helpful to have someone to a little performance testing on the patch, to see how much it helps in terms of CPU utilitzation. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Malcolm Priestley authored
commit 7bf7a711 upstream. When the tuner was split from m88rs2000 the attach function is in wrong place. Move to dm04_lme2510_tuner to trap errors on failure and removing a call to lme_coldreset. Prevents driver starting up without any tuner connected. Fixes to trap for ts2020 fail. LME2510(C): FE Found M88RS2000 ts2020: probe of 0-0060 failed with error -11 ... LME2510(C): TUN Found RS2000 tuner kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Tested-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Malcolm Priestley authored
commit 3d932ee2 upstream. Warm start has no check as whether a genuine device has connected and proceeds to next execution path. Check device should read 0x47 at offset of 2 on USB descriptor read and it is the amount requested of 6 bytes. Fix for kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access as Reported-by:
-
Mohamed Ghannam authored
commit 69c64866 upstream. Whenever the sock object is in DCCP_CLOSED state, dccp_disconnect() must free dccps_hc_tx_ccid and dccps_hc_rx_ccid and set to NULL. Signed-off-by:
Mohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 364f5665 upstream. When issuing an IPI RT push, where an IPI is sent to each CPU that has more than one RT task scheduled on it, it references the root domain's rto_mask, that contains all the CPUs within the root domain that has more than one RT task in the runable state. The problem is, after the IPIs are initiated, the rq->lock is released. This means that the root domain that is associated to the run queue could be freed while the IPIs are going around. Add a sched_get_rd() and a sched_put_rd() that will increment and decrement the root domain's ref count respectively. This way when initiating the IPIs, the scheduler will up the root domain's ref count before releasing the rq->lock, ensuring that the root domain does not go away until the IPI round is complete. Reported-by:
Pavan Kondeti <pkondeti@codeaurora.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 4bdced5c ("sched/rt: Simplify the IPI based RT balancing logic") Link: http://lkml.kernel.org/r/CAEU1=PkiHO35Dzna8EQqNSKW1fr1y1zRQ5y66X117MG06sQtNA@mail.gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit ad0f1d9d upstream. When the rto_push_irq_work_func() is called, it looks at the RT overloaded bitmask in the root domain via the runqueue (rq->rd). The problem is that during CPU up and down, nothing here stops rq->rd from changing between taking the rq->rd->rto_lock and releasing it. That means the lock that is released is not the same lock that was taken. Instead of using this_rq()->rd to get the root domain, as the irq work is part of the root domain, we can simply get the root domain from the irq work that is passed to the routine: container_of(work, struct root_domain, rto_push_work) This keeps the root domain consistent. Reported-by:
-
Petr Cvek authored
commit c8cd7510 upstream. Commit 76e0da34 ("usb-gadget/uvc: use per-attribute show and store methods") caused a stringification of an undefined macro argument "aname", so three UVC parameters (streaming_interval, streaming_maxpacket and streaming_maxburst) were named "aname". Add the definition of "aname" to the main macro and name the filenames as originaly intended. Signed-off-by:
Petr Cvek <petr.cvek@tul.cz> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Thomas Gleixner authored
commit cef31d9a upstream. timer_create() specifies via sigevent->sigev_notify the signal delivery for the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD and (SIGEV_SIGNAL | SIGEV_THREAD_ID). The sanity check in good_sigevent() is only checking the valid combination for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is not set it accepts any random value. This has no real effects on the posix timer and signal delivery code, but it affects show_timer() which handles the output of /proc/$PID/timers. That function uses a string array to pretty print sigev_notify. The access to that array has no bound checks, so random sigev_notify cause access beyond the array bounds. Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID masking from various code pathes as SIGEV_NONE can never be set in combination with SIGEV_THREAD_ID. Reported-by:
Eric Biggers <ebiggers3@gmail.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Eric W. Biederman authored
commit dc3ee32e upstream. Florian Weber reported: > Under full load (unshare() in loop -> OOM conditions) we can > get kernel panic: > > BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 > IP: [<ffffffff81476c85>] nfqnl_nf_hook_drop+0x35/0x70 > [..] > task: ffff88012dfa3840 ti: ffff88012dffc000 task.ti: ffff88012dffc000 > RIP: 0010:[<ffffffff81476c85>] [<ffffffff81476c85>] nfqnl_nf_hook_drop+0x35/0x70 > RSP: 0000:ffff88012dfffd80 EFLAGS: 00010206 > RAX: 0000000000000008 RBX: ffffffff81add0c0 RCX: ffff88013fd80000 > [..] > Call Trace: > [<ffffffff81474d98>] nf_queue_nf_hook_drop+0x18/0x20 > [<ffffffff814738eb>] nf_unregister_net_hook+0xdb/0x150 > [<ffffffff8147398f>] netfilter_net_exit+0x2f/0x60 > [<ffffffff8141b088>] ops_exit_list.isra.4+0x38/0x60 > [<ffffffff8141b652>] setup_net+0xc2/0x120 > [<ffffffff8141bd09>] copy_net_ns+0x79/0x120 > [<ffffffff8106965b>] create_new_namespaces+0x11b/0x1e0 > [<ffffffff810698a7>] unshare_nsproxy_namespaces+0x57/0xa0 > [<ffffffff8104baa2>] SyS_unshare+0x1b2/0x340 > [<ffffffff81608276>] entry_SYSCALL_64_fastpath+0x1e/0xa8 > Code: 65 00 48 89 e5 41 56 41 55 41 54 53 83 e8 01 48 8b 97 70 12 00 00 48 98 49 89 f4 4c 8b 74 c2 18 4d 8d 6e 08 49 81 c6 88 00 00 00 <49> 8b 5d 00 48 85 db 74 1a 48 89 df 4c 89 e2 48 c7 c6 90 68 47 > The simple fix for this requires a new pernet variable for struct nf_queue that indicates when it is safe to use the dynamically allocated nf_queue state. As we need a variable anyway make nf_register_queue_handler and nf_unregister_queue_handler pernet. This allows the existing logic of when it is safe to use the state from the nfnetlink_queue module to be reused with no changes except for making it per net. The syncrhonize_rcu from nf_unregister_queue_handler is moved to a new function nfnl_queue_net_exit_batch so that the worst case of having a syncrhonize_rcu in the pernet exit path is not experienced in batch mode. Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Cc: Eric Biggers <ebiggers3@gmail.com> Signed-off-by:
-
Hugh Dickins authored
Tobias noticed a compile error on 4.4.115, and it's the same on 4.9.80: arch/x86/mm/kaiser.c: In function ‘kaiser_init’: arch/x86/mm/kaiser.c:348:8: error: ‘vsyscall_pgprot’ undeclared (first use in this function) It seems like his combination of kernel options doesn't work for KAISER. X86_VSYSCALL_EMULATION is not set on his system, while LEGACY_VSYSCALL is set to NONE (LEGACY_VSYSCALL_NONE=y). He managed to get things compiling again, by moving the 'extern unsigned long vsyscall_pgprot' outside of the preprocessor statement. This works because the optimizer removes that code (vsyscall_enabled() is always false) - and that's how it was done in some older backports. Reported-by:Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Eric Biggers authored
This is a build fix for the 4.4 PTI backport. 4.4 kernels do not have commit be7635e7 ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") which went into 4.6. Consequently, the irqentry sections are only created when CONFIG_FUNCTION_GRAPH_TRACER is enabled, not also when CONFIG_KASAN is enabled. Therefore, fix the condition for trying to add a user mapping for this section. This fixes the following build error: arch/x86/mm/kaiser.c: In function ‘kaiser_init’: arch/x86/mm/kaiser.c:367:33: error: ‘__irqentry_text_start’ undeclared (first use in this function) kaiser_add_user_map_ptrs_early(__irqentry_text_start, [...] Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
-
Yang Shunyong authored
commit 66b3bd23 upstream. The type of arg passed to dmatest_callback is struct dmatest_done. It refers to test_done in struct dmatest_thread, not done_wait. Fixes: 6f6a23a2 ("dmaengine: dmatest: move callback wait ...") Signed-off-by:
Yang Shunyong <shunyong.yang@hxt-semitech.com> Acked-by:
Adam Wallis <awallis@codeaurora.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Aurelien Aptel authored
commit 97f4b727 upstream. also replaces memset()+kfree() by kzfree(). Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Steve French <smfrench@gmail.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Daniel N Pettersson authored
commit 9aca7e45 upstream. Autonegotiation gives a security settings mismatch error if the SMB server selects an SMBv3 dialect that isn't SMB3.02. The exact error is "protocol revalidation - security settings mismatch". This can be tested using Samba v4.2 or by setting the global Samba setting max protocol = SMB3_00. The check that fails in smb3_validate_negotiate is the dialect verification of the negotiate info response. This is because it tries to verify against the protocol_id in the global smbdefault_values. The protocol_id in smbdefault_values is SMB3.02. In SMB2_negotiate the protocol_id in smbdefault_values isn't updated, it is global so it probably shouldn't be, but server->dialect is. This patch changes the check in smb3_validate_negotiate to use server->dialect instead of server->vals->protocol_id. The patch works with autonegotiate and when using a specific version in the vers mount option. Signed-off-by:
Daniel N Pettersson <danielnp@axis.com> Signed-off-by:
-
Matthew Wilcox authored
commit f04a703c upstream. If cifs_zap_mapping() returned an error, we would return without putting the xid that we got earlier. Restructure cifs_file_strict_mmap() and cifs_file_mmap() to be more similar to each other and have a single point of return that always puts the xid. Signed-off-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
Michal Suchanek authored
commit 1b689a95 upstream. Commit 6e032b35 ("powerpc/powernv: Check device-tree for RFI flush settings") uses u64 in asm/hvcall.h without including linux/types.h This breaks hvcall.h users that do not include the header themselves. Fixes: 6e032b35 ("powerpc/powernv: Check device-tree for RFI flush settings") Signed-off-by:
Michal Suchanek <msuchanek@suse.de> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Borislav Petkov authored
commit 1f161f67 upstream with adjustments. On CPUs like AMD's Geode, for example, we shouldn't even try to load microcode because they do not support the modern microcode loading interface. However, we do the family check *after* the other checks whether the loader has been disabled on the command line or whether we're running in a guest. So move the family checks first in order to exit early if we're being loaded on an unsupported family. Reported-and-tested-by:
Sven Glodowski <glodi1@arcor.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 4.11.. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://bugzilla.suse.com/show_bug.cgi?id=1061396 Link: http://lkml.kernel.org/r/20171012112316.977-1-bp@alien8.deSigned-off-by:
Rolf Neugebauer <rolf.neugebauer@docker.com> Signed-off-by:
-
Borislav Petkov authored
commit a15a7535 upstream with minor adjustments. Doing so is completely void of sense for multiple reasons so prevent it. Set dis_ucode_ldr to true and thus disable the microcode loader by default to address xen pv guests which execute the AP path but not the BSP path. By having it turned off by default, the APs won't run into the loader either. Also, check CPUID(1).ECX[31] which hypervisors set. Well almost, not the xen pv one. That one gets the aforementioned "fix". Also, improve the detection method by caching the final decision whether to continue loading in dis_ucode_ldr and do it once on the BSP. The APs then simply test that value. Signed-off-by:
Juergen Gross <jgross@suse.com> Tested-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by:
-
Robert Baronescu authored
commit 5c6ac1d4 upstream. In case buffer length is a multiple of PAGE_SIZE, the S/G table is incorrectly generated. Fix this by handling buflen = k * PAGE_SIZE separately. Signed-off-by:
Robert Baronescu <robert.baronescu@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Al Viro authored
commit 21fc61c7 upstream. kmap() in page_follow_link_light() needed to go - allowing to hold an arbitrary number of kmaps for long is a great way to deadlocking the system. new helper (inode_nohighmem(inode)) needs to be used for pagecache symlinks inodes; done for all in-tree cases. page_follow_link_light() instrumented to yell about anything missed. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Jin Qian <jinqian@google.com> Signed-off-by:
Jin Qian <jinqian@android.com> Signed-off-by:
-
Eric Biggers authored
commit 794b4bc2 upstream. With the 'encrypted' key type it was possible for userspace to provide a data blob ending with a master key description shorter than expected, e.g. 'keyctl add encrypted desc "new x" @s'. When validating such a master key description, validate_master_desc() could read beyond the end of the buffer. Fix this by using strncmp() instead of memcmp(). [Also clean up the code to deduplicate some logic.] Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Jesse Chan authored
commit 5331aec1 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/soc_camera/soc_scale_crop.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by:
Jesse Chan <jc@linux.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 4cd87951 ] We don't stop device before reset owner, this means we could try to serve any virtqueue kick before reset dev->worker. This will result a warn since the work was pending at llist during owner resetting. Fix this by stopping device during owner reset. Reported-by: syzbot+eb17c6162478cc50632c@syzkaller.appspotmail.com Fixes: 3a4d5c94 ("vhost_net: a kernel-level virtio server") Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit 9b42d55a ] socket can be disconnected and gets transformed back to a listening socket, if sk_frag.page is not released, which will be cloned into a new socket by sk_clone_lock, but the reference count of this page is increased, lead to a use after free or double free issue Signed-off-by:
Li RongQing <lirongqing@baidu.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Chunhao Lin authored
[ Upstream commit 086ca23d ] Driver check the wrong register bit in rtl_ocp_tx_cond() that keep driver waiting until timeout. Fix this by waiting for the right register bit. Signed-off-by:
Chunhao Lin <hau@realtek.com> Signed-off-by:
-
Junxiao Bi authored
[ Upstream commit 233ac389 ] The following soft lockup was caught. This is a deadlock caused by recusive locking. Process kworker/u40:1:28016 was holding spin lock "mbx->queue_lock" in qlcnic_83xx_mailbox_worker(), while a softirq came in and ask the same spin lock in qlcnic_83xx_enqueue_mbx_cmd(). This lock should be hold by disable bh.. [161846.962125] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/u40:1:28016] [161846.962367] Modules linked in: tun ocfs2 xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc sunrpc 8021q mrp garp bridge stp llc bonding dm_round_robin dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 shpchp lpc_ich mfd_core ioatdma ipmi_devintf ipmi_si ipmi_msghandler sg ext4 jbd2 mbcache2 sr_mod cdrom sd_mod igb i2c_algo_bit i2c_core ahci libahci megaraid_sas ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel qla2xxx scsi_transport_fc qlcnic crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod [161846.962454] [161846.962460] CPU: 1 PID: 28016 Comm: kworker/u40:1 Not tainted 4.1.12-94.5.9.el6uek.x86_64 #2 [161846.962463] Hardware name: Oracle Corporation SUN SERVER X4-2L /ASSY,MB,X4-2L , BIOS 26050100 09/19/2017 [161846.962489] Workqueue: qlcnic_mailbox qlcnic_83xx_mailbox_worker [qlcnic] [161846.962493] task: ffff8801f2e34600 ti: ffff88004ca5c000 task.ti: ffff88004ca5c000 [161846.962496] RIP: e030:[<ffffffff810013aa>] [<ffffffff810013aa>] xen_hypercall_sched_op+0xa/0x20 [161846.962506] RSP: e02b:ffff880202e43388 EFLAGS: 00000206 [161846.962509] RAX: 0000000000000000 RBX: ffff8801f6996b70 RCX: ffffffff810013aa [161846.962511] RDX: ffff880202e433cc RSI: ffff880202e433b0 RDI: 0000000000000003 [161846.962513] RBP: ffff880202e433d0 R08: 0000000000000000 R09: ffff8801fe893200 [161846.962516] R10: ffff8801fe400538 R11: 0000000000000206 R12: ffff880202e4b000 [161846.962518] R13: 0000000000000050 R14: 0000000000000001 R15: 000000000000020d [161846.962528] FS: 0000000000000000(0000) GS:ffff880202e40000(0000) knlGS:ffff880202e40000 [161846.962531] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [161846.962533] CR2: 0000000002612640 CR3: 00000001bb796000 CR4: 0000000000042660 [161846.962536] Stack: [161846.962538] ffff880202e43608 0000000000000000 ffffffff813f0442 ffff880202e433b0 [161846.962543] 0000000000000000 ffff880202e433cc ffffffff00000001 0000000000000000 [161846.962547] 00000009813f03d6 ffff880202e433e0 ffffffff813f0460 ffff880202e43440 [161846.962552] Call Trace: [161846.962555] <IRQ> [161846.962565] [<ffffffff813f0442>] ? xen_poll_irq_timeout+0x42/0x50 [161846.962570] [<ffffffff813f0460>] xen_poll_irq+0x10/0x20 [161846.962578] [<ffffffff81014222>] xen_lock_spinning+0xe2/0x110 [161846.962583] [<ffffffff81013f01>] __raw_callee_save_xen_lock_spinning+0x11/0x20 [161846.962592] [<ffffffff816e5c57>] ? _raw_spin_lock+0x57/0x80 [161846.962609] [<ffffffffa028acfc>] qlcnic_83xx_enqueue_mbx_cmd+0x7c/0xe0 [qlcnic] [161846.962623] [<ffffffffa028e008>] qlcnic_83xx_issue_cmd+0x58/0x210 [qlcnic] [161846.962636] [<ffffffffa028caf2>] qlcnic_83xx_sre_macaddr_change+0x162/0x1d0 [qlcnic] [161846.962649] [<ffffffffa028cb8b>] qlcnic_83xx_change_l2_filter+0x2b/0x30 [qlcnic] [161846.962657] [<ffffffff8160248b>] ? __skb_flow_dissect+0x18b/0x650 [161846.962670] [<ffffffffa02856e5>] qlcnic_send_filter+0x205/0x250 [qlcnic] [161846.962682] [<ffffffffa0285c77>] qlcnic_xmit_frame+0x547/0x7b0 [qlcnic] [161846.962691] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962696] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962701] [<ffffffff81630112>] sch_direct_xmit+0x112/0x220 [161846.962706] [<ffffffff8160b80f>] __dev_queue_xmit+0x1df/0x5e0 [161846.962710] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962721] [<ffffffffa0575bd5>] bond_dev_queue_xmit+0x35/0x80 [bonding] [161846.962729] [<ffffffffa05769fb>] __bond_start_xmit+0x1cb/0x210 [bonding] [161846.962736] [<ffffffffa0576a71>] bond_start_xmit+0x31/0x60 [bonding] [161846.962740] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962745] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962749] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962754] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962760] [<ffffffffa05cfa72>] vlan_dev_hard_start_xmit+0xb2/0x150 [8021q] [161846.962764] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962769] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962773] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962777] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962789] [<ffffffffa05adf74>] br_dev_queue_push_xmit+0x54/0xa0 [bridge] [161846.962797] [<ffffffffa05ae4ff>] br_forward_finish+0x2f/0x90 [bridge] [161846.962807] [<ffffffff810b0dad>] ? ttwu_do_wakeup+0x1d/0x100 [161846.962811] [<ffffffff815f929b>] ? __alloc_skb+0x8b/0x1f0 [161846.962818] [<ffffffffa05ae04d>] __br_forward+0x8d/0x120 [bridge] [161846.962822] [<ffffffff815f613b>] ? __kmalloc_reserve+0x3b/0xa0 [161846.962829] [<ffffffff810be55e>] ? update_rq_runnable_avg+0xee/0x230 [161846.962836] [<ffffffffa05ae176>] br_forward+0x96/0xb0 [bridge] [161846.962845] [<ffffffffa05af85e>] br_handle_frame_finish+0x1ae/0x420 [bridge] [161846.962853] [<ffffffffa05afc4f>] br_handle_frame+0x17f/0x260 [bridge] [161846.962862] [<ffffffffa05afad0>] ? br_handle_frame_finish+0x420/0x420 [bridge] [161846.962867] [<ffffffff8160d057>] __netif_receive_skb_core+0x1f7/0x870 [161846.962872] [<ffffffff8160d6f2>] __netif_receive_skb+0x22/0x70 [161846.962877] [<ffffffff8160d913>] netif_receive_skb_internal+0x23/0x90 [161846.962884] [<ffffffffa07512ea>] ? xenvif_idx_release+0xea/0x100 [xen_netback] [161846.962889] [<ffffffff816e5a10>] ? _raw_spin_unlock_irqrestore+0x20/0x50 [161846.962893] [<ffffffff8160e624>] netif_receive_skb_sk+0x24/0x90 [161846.962899] [<ffffffffa075269a>] xenvif_tx_submit+0x2ca/0x3f0 [xen_netback] [161846.962906] [<ffffffffa0753f0c>] xenvif_tx_action+0x9c/0xd0 [xen_netback] [161846.962915] [<ffffffffa07567f5>] xenvif_poll+0x35/0x70 [xen_netback] [161846.962920] [<ffffffff8160e01b>] napi_poll+0xcb/0x1e0 [161846.962925] [<ffffffff8160e1c0>] net_rx_action+0x90/0x1c0 [161846.962931] [<ffffffff8108aaba>] __do_softirq+0x10a/0x350 [161846.962938] [<ffffffff8108ae75>] irq_exit+0x125/0x130 [161846.962943] [<ffffffff813f03a9>] xen_evtchn_do_upcall+0x39/0x50 [161846.962950] [<ffffffff816e7ffe>] xen_do_hypervisor_callback+0x1e/0x40 [161846.962952] <EOI> [161846.962959] [<ffffffff816e5c4a>] ? _raw_spin_lock+0x4a/0x80 [161846.962964] [<ffffffff816e5b1e>] ? _raw_spin_lock_irqsave+0x1e/0xa0 [161846.962978] [<ffffffffa028e279>] ? qlcnic_83xx_mailbox_worker+0xb9/0x2a0 [qlcnic] [161846.962991] [<ffffffff810a14e1>] ? process_one_work+0x151/0x4b0 [161846.962995] [<ffffffff8100c3f2>] ? check_events+0x12/0x20 [161846.963001] [<ffffffff810a1960>] ? worker_thread+0x120/0x480 [161846.963005] [<ffffffff816e187b>] ? __schedule+0x30b/0x890 [161846.963010] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963015] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963021] [<ffffffff810a6b3e>] ? kthread+0xce/0xf0 [161846.963025] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963031] [<ffffffff816e6522>] ? ret_from_fork+0x42/0x70 [161846.963035] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963037] Code: cc 51 41 53 b8 1c 00 00 00 0f 05 41 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 51 41 53 b8 1d 00 00 00 0f 05 <41> 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e7aadb27 ] Newly added igmpv3_get_srcaddr() needs to be called under rcu lock. Timer callbacks do not ensure this locking. ============================= WARNING: suspicious RCU usage 4.15.0+ #200 Not tainted ----------------------------- ./include/linux/inetdevice.h:216 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by syzkaller616973/4074: #0: (&mm->mmap_sem){++++}, at: [<00000000bfce669e>] __do_page_fault+0x32d/0xc90 arch/x86/mm/fault.c:1355 #1: ((&im->timer)){+.-.}, at: [<00000000619d2f71>] lockdep_copy_map include/linux/lockdep.h:178 [inline] #1: ((&im->timer)){+.-.}, at: [<00000000619d2f71>] call_timer_fn+0x1c6/0x820 kernel/time/timer.c:1316 #2: (&(&im->lock)->rlock){+.-.}, at: [<000000005f833c5c>] spin_lock_bh include/linux/spinlock.h:315 [inline] #2: (&(&im->lock)->rlock){+.-.}, at: [<000000005f833c5c>] igmpv3_send_report+0x98/0x5b0 net/ipv4/igmp.c:600 stack backtrace: CPU: 0 PID: 4074 Comm: syzkaller616973 Not tainted 4.15.0+ #200 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4592 __in_dev_get_rcu include/linux/inetdevice.h:216 [inline] igmpv3_get_srcaddr net/ipv4/igmp.c:329 [inline] igmpv3_newpack+0xeef/0x12e0 net/ipv4/igmp.c:389 add_grhead.isra.27+0x235/0x300 net/ipv4/igmp.c:432 add_grec+0xbd3/0x1170 net/ipv4/igmp.c:565 igmpv3_send_report+0xd5/0x5b0 net/ipv4/igmp.c:605 igmp_send_report+0xc43/0x1050 net/ipv4/igmp.c:722 igmp_timer_expire+0x322/0x5c0 net/ipv4/igmp.c:831 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:541 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:938 Fixes: a46182b0 ("net: igmp: Use correct source address on IGMPv3 reports") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 4adfa79f ] When we dump the ip6mr mfc entries via proc, we initialize an iterator with the table to dump but we don't clear the cache pointer which might be initialized from a prior read on the same descriptor that ended. This can result in lock imbalance (an unnecessary unlock) leading to other crashes and hangs. Clear the cache pointer like ipmr does to fix the issue. Thanks for the reliable reproducer. Here's syzbot's trace: WARNING: bad unlock balance detected! 4.15.0-rc3+ #128 Not tainted syzkaller971460/3195 is trying to release lock (mrt_lock) at: [<000000006898068d>] ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553 but there are no more locks to release! other info that might help us debug this: 1 lock held by syzkaller971460/3195: #0: (&p->lock){+.+.}, at: [<00000000744a6565>] seq_read+0xd5/0x13d0 fs/seq_file.c:165 stack backtrace: CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_unlock_imbalance_bug+0x12f/0x140 kernel/locking/lockdep.c:3561 __lock_release kernel/locking/lockdep.c:3775 [inline] lock_release+0x5f9/0xda0 kernel/locking/lockdep.c:4023 __raw_read_unlock include/linux/rwlock_api_smp.h:225 [inline] _raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255 ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553 traverse+0x3bc/0xa00 fs/seq_file.c:135 seq_read+0x96a/0x13d0 fs/seq_file.c:189 proc_reg_read+0xef/0x170 fs/proc/inode.c:217 do_loop_readv_writev fs/read_write.c:673 [inline] do_iter_read+0x3db/0x5b0 fs/read_write.c:897 compat_readv+0x1bf/0x270 fs/read_write.c:1140 do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189 C_SYSC_preadv fs/read_write.c:1209 [inline] compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125 RIP: 0023:0xf7f73c79 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 BUG: sleeping function called from invalid context at lib/usercopy.c:25 in_atomic(): 1, irqs_disabled(): 0, pid: 3195, name: syzkaller971460 INFO: lockdep is turned off. CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:6060 __might_sleep+0x95/0x190 kernel/sched/core.c:6013 __might_fault+0xab/0x1d0 mm/memory.c:4525 _copy_to_user+0x2c/0xc0 lib/usercopy.c:25 copy_to_user include/linux/uaccess.h:155 [inline] seq_read+0xcb4/0x13d0 fs/seq_file.c:279 proc_reg_read+0xef/0x170 fs/proc/inode.c:217 do_loop_readv_writev fs/read_write.c:673 [inline] do_iter_read+0x3db/0x5b0 fs/read_write.c:897 compat_readv+0x1bf/0x270 fs/read_write.c:1140 do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189 C_SYSC_preadv fs/read_write.c:1209 [inline] compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125 RIP: 0023:0xf7f73c79 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 WARNING: CPU: 1 PID: 3195 at lib/usercopy.c:26 _copy_to_user+0xb5/0xc0 lib/usercopy.c:26 Reported-by:
syzbot <bot+eceb3204562c41a438fa1f2335e0fe4f6886d669@syzkaller.appspotmail.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 520a13c5 upstream. The kernel test bot (run by Xiaolong Ye) reported that the following commit: f5caf621 ("x86/asm: Fix inline asm call constraints for Clang") is causing double faults in a kernel compiled with GCC 4.4. Linus subsequently diagnosed the crash pattern and the buggy commit and found that the issue is with this code: register unsigned int __asm_call_sp asm("esp"); #define ASM_CALL_CONSTRAINT "+r" (__asm_call_sp) Even on a 64-bit kernel, it's using ESP instead of RSP. That causes GCC to produce the following bogus code: ffffffff8147461d: 89 e0 mov %esp,%eax ffffffff8147461f: 4c 89 f7 mov %r14,%rdi ffffffff81474622: 4c 89 fe mov %r15,%rsi ffffffff81474625: ba 20 00 00 00 mov $0x20,%edx ffffffff8147462a: 89 c4 mov %eax,%esp ffffffff8147462c: e8 bf 52 05 00 callq ffffffff814c98f0 <copy_user_generic_unrolled> Despite the absurdity of it backing up and restoring the stack pointer for no reason, the bug is actually the fact that it's only backing up and restoring the lower 32 bits of the stack pointer. The upper 32 bits are getting cleared out, corrupting the stack pointer. So change the '__asm_call_sp' register variable to be associated with the actual full-size stack pointer. This also requires changing the __ASM_SEL() macro to be based on the actual compiled arch size, rather than the CONFIG value, because CONFIG_X86_64 compiles some files with '-m32' (e.g., realmode and vdso). Otherwise Clang fails to build the kernel because it complains about the use of a 64-bit register (RSP) in a 32-bit file. Reported-and-Bisected-and-Tested-by:
kernel test robot <xiaolong.ye@intel.com> Diagnosed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: LKP <lkp@01.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: f5caf621 ("x86/asm: Fix inline asm call constraints for Clang") Link: http://lkml.kernel.org/r/20170928215826.6sdpmwtkiydiytim@trebleSigned-off-by:
-
Laurent Pinchart authored
commit 641307df upstream. When stopping the CRTC the driver must disable all planes and wait for the change to take effect at the next vblank. Merely calling drm_crtc_wait_one_vblank() is not enough, as the function doesn't include any mechanism to handle the race with vblank interrupts. Replace the drm_crtc_wait_one_vblank() call with a manual mechanism that handles the vblank interrupt race. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
thongsyho <thong.ho.px@rvc.renesas.com> Signed-off-by:
Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by:
-
Laurent Pinchart authored
commit cbbb90b0 upstream. When implementing support for interlaced modes, the driver switched from reporting vblank events on the vertical blanking (VBK) interrupt to the frame end interrupt (FRM). This incorrectly divided the reported refresh rate by two. Fix it by moving back to the VBK interrupt. Fixes: 906eff7f ("drm: rcar-du: Implement support for interlaced modes") Signed-off-by:
-
Kuninori Morimoto authored
commit e0936c34 upstream. commit 1f8754d4 ("ASoC: rsnd: don't call free_irq() on Parent SSI") fixed Parent SSI duplicate free_irq(). But on Renesas Sound, not only Parent SSI but also Multi SSI have same issue. This patch avoid duplicate free_irq() if it was not pure SSI. Fixes: 1f8754d4 ("ASoC: rsnd: don't call free_irq() on Parent SSI") Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Kuninori Morimoto authored
commit 1f8754d4 upstream. If SSI uses shared pin, some SSI will be used as parent SSI. Then, normal SSI's remove and Parent SSI's remove (these are same SSI) will be called when unbind or remove timing. In this case, free_irq() will be called twice. This patch solve this issue. Signed-off-by:
Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Reported-by:
-
Julian Scheel authored
commit 7ac45d16 upstream. In case cpu could not be found the error message would always refer to /codec/ not being found in DT. Fix this by catching the cpu node not found case explicitly. Signed-off-by:
Julian Scheel <julian@jusst.de> Signed-off-by:
-
Matthias Hintzmann authored
ctx->drvflags is checked in the if clause before beeing initialized. Move initialization before first usage. Note, that the if clause was backported with commit 75f82a70 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") from mainline (upstream commit 2b02c20c ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices"). In mainline, the initialization is at the right place before the if clause. [mrkiko.rs@gmail.com: commit message tweaks] Fixes: 75f82a70 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") Signed-off-by:
Matthias Hintzmann <matthias.dev@gmx.de> Signed-off-by:
-
Shuah Khan authored
Commit 3eee23c3ec14 ("usbip: prevent vhci_hcd driver from leaking a socket pointer address") backported the following commit from mailine. However, backport error caused the tcp_socket address to still leak. commit 2f2d0088 ("usbip: prevent vhci_hcd driver from leaking a socket pointer address") When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by:Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
