- 07 Apr, 2021 5 commits
-
-
Qi Liu authored
Fix the following checkpatch warning: WARNING: 'compoment' may be misspelled - perhaps 'component'? Link: https://lore.kernel.org/r/1616487086-50418-1-git-send-email-liuqi115@huawei.comSigned-off-by:
Qi Liu <liuqi115@huawei.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20210407160007.418053-4-mathieu.poirier@linaro.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wei Yongjun authored
The sparse tool complains as follows: drivers/hwtracing/coresight/coresight-etm-perf.c:61:25: warning: symbol 'format_attr_contextid' was not declared. Should it be static? This symbol is not used outside of coresight-etm-perf.c, so this commit marks it static. Link: https://lore.kernel.org/r/20210308123250.2417947-1-weiyongjun1@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Sai Prakash Ranjan authored
Add ETM PID for Cortex-A78 to the list of supported ETMs. Link: https://lore.kernel.org/r/20210213112829.26834-1-saiprakash.ranjan@codeaurora.orgReviewed-by:
Mike Leach <mike.leach@linaro.org> Signed-off-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'phy-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.13 - Updates: - Yaml conversion for mvebu-utmi binding, bcm-ns-usb2 and bcm-ns-usb3 bindings - Mediatek dsi and hdmi phy updates - TI j721e-wiz updates for AM64 - Cadence-torrent phy updates for SGMII/QSGMII - New support: - usb3-dp phy for Qualcomm SM8250 - UTMI phy for Armada CP110 - USB phy for Qualcomm SC7280 - Binding and driver for Sparx5 ethernet serdes * tag 'phy-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (75 commits) phy: fix resource_size.cocci warnings phy: Sparx5 Eth SerDes: Use direct register operations phy: hisilicon: Use the correct HiSilicon copyright phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMON phy: qcom-qmp: add support for sm8250-usb3-dp phy phy: qcom-qmp: rename common registers phy: qcom-qmp: move DP functions to callbacks dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SM8250 dt-bindings: phy: qcom,qmp-usb3-dp-phy: move usb3 compatibles back to qcom,qmp-phy.yaml phy: ti: j721e-wiz: Configure 'p_standard_mode' only for DP/QSGMII dt-bindings: phy: fix dt_binding_check warning in mediatek, ufs-phy.yaml phy: zynqmp: Handle the clock enable/disable properly dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml phy: microchip: PHY_SPARX5_SERDES should depend on ARCH_SPARX5 phy: cadence-torrent: Add delay for PIPE clock to be stable phy: cadence-torrent: Explicitly request exclusive reset control phy: cadence-torrent: Do not configure SERDES if it's already configured phy: cadence-torrent: Group reset APIs and clock APIs phy: ti: j721e-wiz: Do not configure wiz if its already configured ...
-
Greg Kroah-Hartman authored
Merge tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.13-rc1 Updates for v5.13-rc1 are: Core: - Ability to add quirks for masters - static checker cleanup for bus code Drivers: - DMI quirks for Intel controllers - static checker cleanup for drivers - add auto enumeration support qcom controller * tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (45 commits) soundwire: intel_init: test link->cdns soundwire: qcom: handle return correctly in qcom_swrm_transport_params soundwire: qcom: cleanup internal port config indexing soundwire: qcom: wait for fifo space to be available before read/write soundwire: qcom: add static port map support soundwire: qcom: update port map allocation bit mask soundwire: add static port mapping support soundwire: stream: fix memory leak in stream config error path soundwire: qcom: use signed variable for error return soundwire: qcom: wait for enumeration to be complete in probe soundwire: qcom: add auto enumeration support soundwire: export sdw_compare_devid, sdw_extract_slave_id and sdw_slave_add soundwire: qcom: add support to new interrupts soundwire: qcom: update register read/write routine soundwire: qcom: start the clock during initialization soundwire: qcom: set continue execution flag for ignored commands soundwire: qcom: add support to missing transport params dt-bindings: soundwire: qcom: clarify data port bus parameters soundwire: cadence: only prepare attached devices on clock stop soundwire: generic_allocation: fix confusion between group and packing ...
-
- 06 Apr, 2021 12 commits
-
-
kernel test robot authored
drivers/phy/microchip/sparx5_serdes.c:2440:54-57: ERROR: Missing resource_size with iores Use resource_size function on resource object instead of explicit computation. Generated by: scripts/coccinelle/api/resource_size.cocci Fixes: 2ff8a1ee ("phy: Add Sparx5 ethernet serdes PHY driver") CC: Steen Hegelund <steen.hegelund@microchip.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org>
-
Steen Hegelund authored
Use direct register operations instead of a table of register information to lower the stack usage. Signed-off-by:
Steen Hegelund <steen.hegelund@microchip.com> Reported-by:
-
Hao Fang authored
s/Hisilicon/HiSilicon/g. It should use capital S, according to the official website. Signed-off-by:
Hao Fang <fanghao11@huawei.com> Link: https://lore.kernel.org/r/1617278537-26102-1-git-send-email-fanghao11@huawei.comSigned-off-by:
-
Randy Dunlap authored
When USB and USB_COMMON are not enabled, phy-mvebu-cp110-utmi suffers a build error due to a missing interface that is provided by CONFIG_USB_COMMON, so make the driver depend on USB_COMMON. ld: drivers/phy/marvell/phy-mvebu-cp110-utmi.o: in function `mvebu_cp110_utmi_phy_probe': phy-mvebu-cp110-utmi.c:(.text+0x152): undefined reference to `of_usb_get_dr_mode_by_phy' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-phy@lists.infradead.org Link: https://lore.kernel.org/r/20210401210045.23525-1-rdunlap@infradead.orgSigned-off-by:
-
Bard Liao authored
intel_link_probe() could return error and dev_get_drvdata() will return null in such case. So we have to test link->cdns after link->cdns = dev_get_drvdata(&ldev->auxdev.dev); Otherwise, we will meet the "kernel NULL pointer dereference" error. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210406010101.11442-1-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Srinivas Kandagatla authored
Looks like return from reg_write is set but not checked. Fix this by adding error return path. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1503591 ("UNUSED_VALUE") Fixes: 128eaf93 ("soundwire: qcom: add support to missing transport params") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210401091502.15825-1-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
Internally used portconfig array for storing port bandwidth params starts from offset zero. However port zero is not really used and we also copy the bus parameters to offset zero. So basically we endup with a code which has to subtract 1 from port number to get to port parameters. This is bit confusing to the reader so, make this bit more obvious by only copying the parameters to offset 1 instead of zero. This will avoid doing -1 every time when we try to get port params. Similar thing has been recently done with din/dout_port_mask. Signed-off-by:
-
Srinivas Kandagatla authored
If we write registers very fast we can endup in a situation where some of the writes will be dropped without any notice. So wait for the fifo space to be available before reading/writing the soundwire registers. Signed-off-by:
-
Srinivas Kandagatla authored
SoundWire device ports are statically mapped to Controller ports during design. Add support to read these from SoundWire devices. This controller uses static port map info to setup bandwidth parameters for those ports. A generic port allocation is not possible in this cases! Signed-off-by:
-
Srinivas Kandagatla authored
currently the internal bitmask used for allocating ports starts with offset 0. This is bit confusing as data port numbers on Qualcomm controller are valid from 1 to 14. So adjust this bit mask accordingly, this will also help while adding static port map support. Signed-off-by:
-
Srinivas Kandagatla authored
Some of the SoundWire device ports are statically mapped to Controller ports during design, however there is no way to expose this information to the controller. Controllers like Qualcomm ones use this info to setup static bandwidth parameters for those ports. A generic port allocation is not possible in this cases! So this patch adds a new member m_port_map to struct sdw_slave to expose this static map. Signed-off-by:
-
Rander Wang authored
When stream config is failed, master runtime will release all slave runtime in the slave_rt_list, but slave runtime is not added to the list at this time. This patch frees slave runtime in the config error path to fix the memory leak. Fixes: 89e59053 ("soundwire: Add support for SoundWire stream management") Signed-off-by:
Keyon Jie <yang.jie@intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
-
- 05 Apr, 2021 7 commits
-
-
Gustavo Pimentel authored
This patch describes the sysfs interface implemented on the dw-xdata-pcie driver. Signed-off-by:
Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/438c4ca9f6cc9e1cb29a65c0d2cca9a3d3f181b1.1617016509.git.gustavo.pimentel@synopsys.comSigned-off-by:
-
Gustavo Pimentel authored
Add Synopsys xData IP driver maintainer. This driver aims to support Synopsys xData IP and is normally distributed along with Synopsys PCIe EndPoint IP as a PCIe traffic generator (depends of the use and licensing agreement). Signed-off-by:
-
Gustavo Pimentel authored
Add Documentation for dw-xdata-pcie driver. Signed-off-by:
-
Gustavo Pimentel authored
Add Synopsys DesignWare xData IP driver. This driver enables/disables the PCI traffic generator module pertain to the Synopsys DesignWare prototype. Signed-off-by:
-
Tetsuo Handa authored
KMSAN complains that vmci_check_host_caps() left the payload part of check_msg uninitialized. ===================================================== BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10 CPU: 1 PID: 1 Comm: swapper/0 Tainted: G B 5.11.0-rc7+ #4 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack+0x21c/0x280 kmsan_report+0xfb/0x1e0 kmsan_internal_check_memory+0x202/0x520 kmsan_check_memory+0xd/0x10 iowrite8_rep+0x86/0x380 vmci_guest_probe_device+0xf0b/0x1e70 pci_device_probe+0xab3/0xe70 really_probe+0xd16/0x24d0 driver_probe_device+0x29d/0x3a0 device_driver_attach+0x25a/0x490 __driver_attach+0x78c/0x840 bus_for_each_dev+0x210/0x340 driver_attach+0x89/0xb0 bus_add_driver+0x677/0xc40 driver_register+0x485/0x8e0 __pci_register_driver+0x1ff/0x350 vmci_guest_init+0x3e/0x41 vmci_drv_init+0x1d6/0x43f do_one_initcall+0x39c/0x9a0 do_initcall_level+0x1d7/0x259 do_initcalls+0x127/0x1cb do_basic_setup+0x33/0x36 kernel_init_freeable+0x29a/0x3ed kernel_init+0x1f/0x840 ret_from_fork+0x1f/0x30 Uninit was created at: kmsan_internal_poison_shadow+0x5c/0xf0 kmsan_slab_alloc+0x8d/0xe0 kmem_cache_alloc+0x84f/0xe30 vmci_guest_probe_device+0xd11/0x1e70 pci_device_probe+0xab3/0xe70 really_probe+0xd16/0x24d0 driver_probe_device+0x29d/0x3a0 device_driver_attach+0x25a/0x490 __driver_attach+0x78c/0x840 bus_for_each_dev+0x210/0x340 driver_attach+0x89/0xb0 bus_add_driver+0x677/0xc40 driver_register+0x485/0x8e0 __pci_register_driver+0x1ff/0x350 vmci_guest_init+0x3e/0x41 vmci_drv_init+0x1d6/0x43f do_one_initcall+0x39c/0x9a0 do_initcall_level+0x1d7/0x259 do_initcalls+0x127/0x1cb do_basic_setup+0x33/0x36 kernel_init_freeable+0x29a/0x3ed kernel_init+0x1f/0x840 ret_from_fork+0x1f/0x30 Bytes 28-31 of 36 are uninitialized Memory access of size 36 starts at ffff8881675e5f00 ===================================================== Fixes: 1f166439 ("VMCI: guest side driver implementation.") Cc: <stable@vger.kernel.org> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/20210402121742.3917-2-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
-
Tetsuo Handa authored
KMSAN complains that the vmci_use_ppn64() == false path in vmci_dbell_register_notification_bitmap() left upper 32bits of bitmap_set_msg.bitmap_ppn64 member uninitialized. ===================================================== BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc7+ #4 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack+0x21c/0x280 kmsan_report+0xfb/0x1e0 kmsan_internal_check_memory+0x484/0x520 kmsan_check_memory+0xd/0x10 iowrite8_rep+0x86/0x380 vmci_send_datagram+0x150/0x280 vmci_dbell_register_notification_bitmap+0x133/0x1e0 vmci_guest_probe_device+0xcab/0x1e70 pci_device_probe+0xab3/0xe70 really_probe+0xd16/0x24d0 driver_probe_device+0x29d/0x3a0 device_driver_attach+0x25a/0x490 __driver_attach+0x78c/0x840 bus_for_each_dev+0x210/0x340 driver_attach+0x89/0xb0 bus_add_driver+0x677/0xc40 driver_register+0x485/0x8e0 __pci_register_driver+0x1ff/0x350 vmci_guest_init+0x3e/0x41 vmci_drv_init+0x1d6/0x43f do_one_initcall+0x39c/0x9a0 do_initcall_level+0x1d7/0x259 do_initcalls+0x127/0x1cb do_basic_setup+0x33/0x36 kernel_init_freeable+0x29a/0x3ed kernel_init+0x1f/0x840 ret_from_fork+0x1f/0x30 Local variable ----bitmap_set_msg@vmci_dbell_register_notification_bitmap created at: vmci_dbell_register_notification_bitmap+0x50/0x1e0 vmci_dbell_register_notification_bitmap+0x50/0x1e0 Bytes 28-31 of 32 are uninitialized Memory access of size 32 starts at ffff88810098f570 ===================================================== Fixes: 83e2ec76 ("VMCI: doorbell implementation.") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
We need the char/misc fixes in here as well. Signed-off-by:
-
- 04 Apr, 2021 2 commits
-
-
Linus Torvalds authored
-
Zheyu Ma authored
For each device, the nosy driver allocates a pcilynx structure. A use-after-free might happen in the following scenario: 1. Open nosy device for the first time and call ioctl with command NOSY_IOC_START, then a new client A will be malloced and added to doubly linked list. 2. Open nosy device for the second time and call ioctl with command NOSY_IOC_START, then a new client B will be malloced and added to doubly linked list. 3. Call ioctl with command NOSY_IOC_START for client A, then client A will be readded to the doubly linked list. Now the doubly linked list is messed up. 4. Close the first nosy device and nosy_release will be called. In nosy_release, client A will be unlinked and freed. 5. Close the second nosy device, and client A will be referenced, resulting in UAF. The root cause of this bug is that the element in the doubly linked list is reentered into the list. Fix this bug by adding a check before inserting a client. If a client is already in the linked list, don't insert it. The following KASAN report reveals it: BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210 Write of size 8 at addr ffff888102ad7360 by task poc CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: nosy_release+0x1ea/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 337: nosy_open+0x154/0x4d0 misc_open+0x2ec/0x410 chrdev_open+0x20d/0x5a0 do_dentry_open+0x40f/0xe80 path_openat+0x1cf9/0x37b0 do_filp_open+0x16d/0x390 do_sys_openat2+0x11d/0x360 __x64_sys_open+0xfd/0x1a0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 337: kfree+0x8f/0x210 nosy_release+0x158/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380) [ Modified to use 'list_empty()' inside proper lock - Linus ] Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/Reported-and-tested-by:马哲宇 (Zheyu Ma) <zheyuma97@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 03 Apr, 2021 14 commits
-
-
git://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC fix from Stafford Horne: "Fix duplicate header include in Litex SOC driver" * tag 'for-linus' of git://github.com/openrisc/linux: soc: litex: Remove duplicated header file inclusion
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
POull io_uring fix from Jens Axboe: "Just fixing a silly braino in a previous patch, where we'd end up failing to compile if CONFIG_BLOCK isn't enabled. Not that a lot of people do that, but kernel bot spotted it and it's probably prudent to just flush this out now before -rc6. Sorry about that, none of my test compile configs have !CONFIG_BLOCK" * tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block: io_uring: fix !CONFIG_BLOCK compilation failure
-
Zhen Lei authored
The header file <linux/errno.h> is already included above and can be removed here. Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by:
Mateusz Holenko <mholenko@antmicro.com> Signed-off-by:
Stafford Horne <shorne@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fixes from Andreas Gruenbacher: "Two more gfs2 fixes" * tag 'gfs2-v5.12-rc2-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: report "already frozen/thawed" errors gfs2: Flag a withdraw if init_threads() fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: "A handful of fixes for 5.12: - fix a stack tracing regression related to "const register asm" variables, which have unexpected behavior. - ensure the value to be written by put_user() is evaluated before enabling access to userspace memory.. - align the exception vector table correctly, so we don't rely on the firmware's handling of unaligned accesses. - build fix to make NUMA depend on MMU, which triggered on some randconfigs" * tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Make NUMA depend on MMU riscv: remove unneeded semicolon riscv,entry: fix misaligned base for excp_vect_table riscv: evaluate put_user() arg before enabling user access riscv: Drop const annotation for sp -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Fix a bug on pseries where spurious wakeups from H_PROD would prevent partition migration from succeeding. Fix oopses seen in pcpu_alloc(), caused by parallel faults of the percpu mapping causing us to corrupt the protection key used for the mapping, and cause a fatal key fault. Thanks to Aneesh Kumar K.V, Murilo Opsfelder Araujo, and Nathan Lynch" * tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm/book3s64: Use the correct storage key value when calling H_PROTECT powerpc/pseries/mobility: handle premature return from H_JOIN powerpc/pseries/mobility: use struct for shared state
-
Linus Torvalds authored
Merge tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V fixes from Wei Liu: "One fix from Lu Yunlong for a double free in hvfb_probe" * tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: video: hyperv_fb: Fix a double free in hvfb_probe
-
Linus Torvalds authored
Merge tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single driver core fix for a reported problem with differed probing. It has been in linux-next for a while with no reported problems" * tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: clear deferred probe reason on probe retry
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a few small driver char/misc changes for 5.12-rc6. Nothing major here, a few fixes for reported issues: - interconnect fixes for problems found - fbcon syzbot-found fix - extcon fixes - firmware stratix10 bugfix - MAINTAINERS file update. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: drivers: video: fbcon: fix NULL dereference in fbcon_cursor() mei: allow map and unmap of client dma buffer only for disconnected client MAINTAINERS: Add linux-phy list and patchwork interconnect: Fix kerneldoc warning firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0 extcon: Fix error handling in extcon_dev_register extcon: Add stubs for extcon_register_notifier_all() functions interconnect: core: fix error return code of icc_link_destroy() interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are two rtl8192e staging driver fixes for reported problems. Both of these have been in linux-next for a while with no reported issues" * tag 'staging-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8192e: Change state information from u16 to u8 staging: rtl8192e: Fix incorrect source in memcpy()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull serial driver fix from Greg KH: "Here is a single serial driver fix for 5.12-rc6. Is is a revert of a change that showed up in 5.9 that has been reported to cause problems. It has been in linux-next for a while with no reported issues" * tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: soc: qcom-geni-se: Cleanup the code to remove proxy votes
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a few small USB driver fixes for 5.12-rc6 to resolve reported problems. They include: - a number of cdc-acm fixes for reported problems. It seems more people are using this driver lately... - dwc3 driver fixes for reported problems, and fixes for the fixes :) - dwc2 driver fixes for reported issues. - musb driver fix. - new USB quirk additions. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (23 commits) usb: dwc2: Prevent core suspend when port connection flag is 0 usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board. usb: musb: Fix suspend with devices connected for a64 usb: xhci-mtk: fix broken streams issue on 0.96 xHCI usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control() USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem USB: cdc-acm: do not log successful probe on later errors USB: cdc-acm: always claim data interface USB: cdc-acm: use negation for NULL checks USB: cdc-acm: clean up probe error labels USB: cdc-acm: drop redundant driver-data reset USB: cdc-acm: drop redundant driver-data assignment USB: cdc-acm: fix use-after-free after probe failure USB: cdc-acm: fix double free on probe failure USB: cdc-acm: downgrade message to debug USB: cdc-acm: untangle a circular dependency between callback and softint cdc-acm: fix BREAK rx code path adding necessary calls usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel Merrifield ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fix from James Bottomley: "A single fix to iscsi for a rare race condition which can cause a kernel panic" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: Fix race condition between login and sync thread
-
Jens Axboe authored
kernel test robot correctly pinpoints a compilation failure if CONFIG_BLOCK isn't set: fs/io_uring.c: In function '__io_complete_rw': >> fs/io_uring.c:2509:48: error: implicit declaration of function 'io_rw_should_reissue'; did you mean 'io_rw_reissue'? [-Werror=implicit-function-declaration] 2509 | if ((res == -EAGAIN || res == -EOPNOTSUPP) && io_rw_should_reissue(req)) { | ^~~~~~~~~~~~~~~~~~~~ | io_rw_reissue cc1: some warnings being treated as errors Ensure that we have a stub declaration of io_rw_should_reissue() for !CONFIG_BLOCK. Fixes: 230d50d4 ("io_uring: move reissue into regular IO path") Reported-by:Jens Axboe <axboe@kernel.dk>
-
