- 14 Jan, 2016 21 commits
-
-
Dan Williams authored
commit ef83b6e8 upstream. Similar to XFS warn when mounting DAX while it is still considered under development. Also, aspects of the DAX implementation, for example synchronization against multiple faults and faults causing block allocation, depend on the correct implementation in the filesystem. The maturity of a given DAX implementation is filesystem specific. Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: linux-ext4@vger.kernel.org Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
Dave Chinner <david@fromorbit.com> Acked-by:
Jan Kara <jack@suse.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Bjørn Mork authored
commit 59536da3 upstream. The DEVICE_HWI type was added under the faulty assumption that Huawei devices based on Qualcomm chipsets and firmware use the static USB interface numbering known from Gobi devices. But this model does not apply to Huawei devices like the HP branded lt4112 (Huawei me906e). Huawei firmwares will dynamically assign interface numbers. Functions are renumbered when the firmware is reconfigured. Fix by changing the DEVICE_HWI type to use a simplified version of Huawei's subclass + protocol scheme: Blacklisting known network interface combinations and assuming the rest are serial. Reported-and-tested-by:
Muri Nicanor <muri+libqmi@immerda.ch> Tested-by:
Martin Hauke <mardnh@gmx.de> Fixes: e7181d00 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jay Cornwall authored
commit a80b3047 upstream. The VM default page (used when a VM translation fails) is allocated in system memory. The VM is misconfigured to interpret the physical address as referencing a VRAM physical page. Route default page accesses to system memory. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Jay Cornwall <jay@jcornwall.me> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 24dd2f64 upstream. Avoids spew on resume for systems where sysfs may fail even on init. bug: https://bugzilla.kernel.org/show_bug.cgi?id=106851Signed-off-by:
-
Michel Dänzer authored
commit 96ea47c0 upstream. They reportedly cause random GPU hangs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91268Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Imre Deak authored
commit fd0fe6ac upstream. After Damien's D3 fix I started to get runtime suspend residency for the first time and that revealed a breakage on the set_caching IOCTL path that accesses the HW but doesn't take an RPM ref. Fix this up. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446665132-22491-1-git-send-email-imre.deak@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Jani Nikula authored
commit 1b9448b0 upstream. Unsurprisingly macbooks have backlights, just the VBT doesn't seem to know it in this case. Reported-and-tested-by:
Daniel Nicoletti <dantti12@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88325 Fixes: c675949e ("drm/i915: do not setup backlight if not available according to VBT") Reviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by:
-
Corey Minyard authored
commit 0cfec916 upstream. The timer and thread were not being started for internal messages, so in interrupt mode if something hung the timer would never go off and clean things up. Factor out the internal message sending and start the timer for those messages, too. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Tested-by:
Gouji, Masayuki <gouji.masayuki@jp.fujitsu.com> Signed-off-by:
-
Thomas Betker authored
commit a57f8dac upstream. The scaling factor for VREFN is 3.0/4096 (not 1.0/4096), just as for VREFP. This is not immediately obvious from the specification (Xilinx UG480), but has been confirmed by Xilinx support. Suggested-by:
Hartmut Knaack <knaack.h@gmx.de> Signed-off-by:
Thomas Betker <thomas.betker@rohde-schwarz.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Chris Lesiak authored
commit 0d2f6fd3 upstream. The Silicon Labs Si7013, Si7020, and Si7021 family of I2C humidity and temperature sensors deliver 16 bit data high byte first. See the datasheet available at: https://www.silabs.com/Support%20Documents%2fTechnicalDocs%2fSi7020-A20.pdf But as documented in Documentation/i2c/smbus-protocol, i2c_smbus_read_word_data() expects the low byte first. Change the driver to use i2c_smbus_read_word_swapped to get correct byte order. Signed-off-by:
Chris Lesiak <chris.lesiak@licor.com> Signed-off-by:
-
Tadeusz Struk authored
commit 176155da upstream. Bugfix - don't dereference userspace pointer. Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Adrian Hunter authored
commit d2302933 upstream. mmc_select_hs400() calls __mmc_switch() which checks the switch is successful using CMD13 (SEND_STATUS). The problem is that it does that using the timing settings of the previous mode. That is prone to error, especially when switching from HS to HS400 because the timing parameters for HS mode are tighter than the timing parameters for HS400 mode. In the case when CMD13 polling is used (i.e. not MMC_CAP_WAIT_WHILE_BUSY) with the switch command, it must be assumed that using different modes on the card and host must work. However in the case when CMD13 polling is not used (i.e. MMC_CAP_WAIT_WHILE_BUSY) mmc_select_hs400() can be made more reliable by setting the host to the correct timing before sending CMD13. This patch does that. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Tested-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Adrian Hunter authored
commit 974007aa upstream. Move the mmc_switch_status() function in preparation for calling it in mmc_select_hs400(). Signed-off-by:
-
Adrian Hunter authored
commit 51b12f77 upstream. mmc_select_hs400() begins with the card and host in HS200 mode. Therefore, any commands sent to the card should use HS200 timing. It is incorrect to set the host to High Speed (HS) timing before sending the switch command. Doing so is unreliable because the timing parameters for HS mode are tighter than the timing parameters for HS200 mode. Thus the HS timings should be set only after the card has switched mode. However, it is not unreasonable first to reduce the frequency to the HS mode frequency, which should make the switch command and subsequent CMD13 commands more reliable. This patch does that. Signed-off-by:
-
Adrian Hunter authored
commit 1815e61b upstream. Currently mmc_select_hs200() uses __mmc_switch() which checks the success of the switch to HS200 mode using CMD13 (SEND_STATUS). The problem is that it does that using the timing settings of legacy mode. That is prone to error, not least because the timing parameters for legacy mode are tighter than the timing parameters for HS200 mode. In the case when CMD13 polling is used (i.e. not MMC_CAP_WAIT_WHILE_BUSY) with the switch command, it must be assumed that using different modes on the card and host must work. However in the case when CMD13 polling is not used (i.e. MMC_CAP_WAIT_WHILE_BUSY) mmc_select_hs200() can be made more reliable by setting the host to the correct timing before sending CMD13. This patch does that. A complication is that the caller, mmc_select_timing(), will ignore a switch error (indicated by -EBADMSG), assume the old mode is valid and continue, so the old timing must be restored in that case. Signed-off-by:
-
Sanchayan Maity authored
commit 8546d2e5 upstream. In case the fsl,adck-max-frequency property is not present in the device tree, a division by zero error results during the probe call on kernel boot (see below). This patch fixes it and also restores device tree compatibility in case kernels are booting with old device trees without this property specified. [ 1.063229] Division by zero in kernel. [ 1.067152] CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc5-00212-gcc88cef #37 [ 1.074650] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 1.081135] Backtrace: [ 1.083694] [<800134a4>] (dump_backtrace) from [<8001369c>] (show_stack+0x18/0x1c) [ 1.091340] r7:00000008 r6:8e0ae210 r5:00000000 r4:8e299800 [ 1.097146] [<80013684>] (show_stack) from [<80297b1c>] (dump_stack+0x24/0x28) [ 1.104483] [<80297af8>] (dump_stack) from [<80013608>] (__div0+0x1c/0x20) [ 1.111421] [<800135ec>] (__div0) from [<802968b4>] (Ldiv0+0x8/0x10) [ 1.117865] [<80424350>] (vf610_adc_probe) from [<803153b4>] (platform_drv_probe+0x4c/0xac) [ 1.126311] r10:00000000 r9:8076a5ec r8:00000000 r7:fffffdfb r6:807cc67c r5:8e0ae210 [ 1.134319] r4:807f6c54 [ 1.136915] [<80315368>] (platform_drv_probe) from [<803138bc>] (driver_probe_device+0x20c/0x2f8) [ 1.145882] r7:807cc67c r6:00000000 r5:8e0ae210 r4:807f6c54 [ 1.151657] [<803136b0>] (driver_probe_device) from [<80313a3c>] (__driver_attach+0x94/0x98) [ 1.160190] r9:8076a5ec r8:00000098 r7:00000000 r6:8e0ae244 r5:807cc67c r4:8e0ae210 [ 1.168112] [<803139a8>] (__driver_attach) from [<80311cb8>] (bus_for_each_dev+0x70/0xa4) [ 1.176383] r7:00000000 r6:803139a8 r5:807cc67c r4:00000000 [ 1.182159] [<80311c48>] (bus_for_each_dev) from [<80313318>] (driver_attach+0x24/0x28) [ 1.190260] r6:807bb568 r5:8e2a5b00 r4:807cc67c [ 1.194996] [<803132f4>] (driver_attach) from [<80312f50>] (bus_add_driver+0x1a4/0x21c) [ 1.203113] [<80312dac>] (bus_add_driver) from [<803142a8>] (driver_register+0x80/0x100) [ 1.211275] r7:8e2a7dc0 r6:807a8160 r5:80789e14 r4:807cc67c [ 1.217075] [<80314228>] (driver_register) from [<803152f8>] (__platform_driver_register+0x5c/0x64) [ 1.226216] r5:80789e14 r4:807a8160 [ 1.229877] [<8031529c>] (__platform_driver_register) from [<80789e30>] (vf610_adc_driver_init+0x1c/0x20) [ 1.239556] [<80789e14>] (vf610_adc_driver_init) from [<800095f8>] (do_one_initcall+0x94/0x1dc) [ 1.248365] [<80009564>] (do_one_initcall) from [<8076ae34>] (kernel_init_freeable+0x13c/0x1e0) [ 1.257155] r10:80794830 r9:8076a5ec r8:00000098 r7:807d5780 r6:807d5780 r5:00000006 [ 1.265153] r4:807a0ee8 [ 1.267753] [<8076acf8>] (kernel_init_freeable) from [<80590ef0>] (kernel_init+0x18/0xf0) [ 1.276021] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:80590ed8 [ 1.284015] r4:807d5780 [ 1.286615] [<80590ed8>] (kernel_init) from [<8000f878>] (ret_from_fork+0x14/0x3c) [ 1.294278] r5:80590ed8 r4:00000000 Signed-off-by:
Sanchayan Maity <maitysanchayan@gmail.com> Acked-by:
Fugang Duan <B38611@freescale.com> Acked-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Lars-Peter Clausen authored
commit 785171fd upstream. While the datasheet for the AD7785 lists 0xXB as the product ID the actual product ID is 0xX3. Fix the product ID otherwise the driver will reject the device due to non matching IDs. Fixes: e786cc26 ("staging:iio:ad7793: Implement stricter id checking") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Lars-Peter Clausen authored
commit 5dcbe97b upstream. The ad5629/ad5669 are the I2C variant of the ad5628/ad5668, which has a SPI interface. They are mostly identical with the exception that the shift factor is different. Currently the driver does not take care of this difference which leads to incorrect DAC output values. Fix this by introducing a custom channel spec for the ad5629/ad5669 with the correct shift factor. Fixes: commit 6a17a076 ("iio:dac:ad5064: Add support for the ad5629r and ad5669r") Signed-off-by:
-
Michael Hennerich authored
commit 03fe472e upstream. i2c_master_send() returns the number of bytes transferred on success while the ad5064 driver expects that the write() callback returns 0 on success. Fix that by translating any non negative return value of i2c_master_send() to 0. Fixes: commit 6a17a076 ("iio:dac:ad5064: Add support for the ad5629r and ad5669r") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Vladimir Zapolskiy authored
commit 01bb70ae upstream. If common clock framework is configured, the driver generates a warning, which is fixed by this change: root@devkit3250:~# cat /sys/bus/iio/devices/iio\:device0/in_voltage0_raw ------------[ cut here ]------------ WARNING: CPU: 0 PID: 724 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: sc16is7xx snd_soc_uda1380 CPU: 0 PID: 724 Comm: cat Not tainted 4.3.0-rc2+ #198 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc32xx_read_raw+0x38/0x80) [<>] (lpc32xx_read_raw) from [<>] (iio_read_channel_info+0x70/0x94) [<>] (iio_read_channel_info) from [<>] (dev_attr_show+0x28/0x4c) [<>] (dev_attr_show) from [<>] (sysfs_kf_seq_show+0x8c/0xf0) [<>] (sysfs_kf_seq_show) from [<>] (kernfs_seq_show+0x2c/0x30) [<>] (kernfs_seq_show) from [<>] (seq_read+0x1c8/0x440) [<>] (seq_read) from [<>] (kernfs_fop_read+0x38/0x170) [<>] (kernfs_fop_read) from [<>] (do_readv_writev+0x16c/0x238) [<>] (do_readv_writev) from [<>] (vfs_readv+0x50/0x58) [<>] (vfs_readv) from [<>] (default_file_splice_read+0x1a4/0x308) [<>] (default_file_splice_read) from [<>] (do_splice_to+0x78/0x84) [<>] (do_splice_to) from [<>] (splice_direct_to_actor+0xc8/0x1cc) [<>] (splice_direct_to_actor) from [<>] (do_splice_direct+0xa0/0xb8) [<>] (do_splice_direct) from [<>] (do_sendfile+0x1a8/0x30c) [<>] (do_sendfile) from [<>] (SyS_sendfile64+0x104/0x10c) [<>] (SyS_sendfile64) from [<>] (ret_fast_syscall+0x0/0x38) Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Bhuvanchandra DV authored
commit 6219f432 upstream. Calculate ADCR_VTEMP25 using VTEMP25 at VREFH_ADC 3V3. Existing calculations consider the typical values provided in datasheet. Those typical values are valid for VREFH_ADC at 3.0V. VTEMP25 is different for different VREFH_ADC voltages. With VREFH_ADC at 3.3V, voltage at 25°C is 0.699V. Hence update the VTEMP25 to 0.699V which gives ADCR@Temp25 as 867. Formula for finding ADCR@Temp25: ADCR@Temp25 = (ADCR@Vdd * V@TEMP25 * 10) / VDDconv ADCR@Vdd for 12-Bit ADC = 4095 VDDconv = VREFH_ADC * 10 VREFH_ADC@3.3V ADCR@Temp25 = (4095 * .699 * 10) / 33 ADCR@Temp25 ~= 867 | VREFH_ADC | V@TEMP25 | VDDconv | ADCR@Temp25 | | 3.0V | 0.696mV | 30 | 950 | | 3.3V | 0.699mV | 33 | 867 | Signed-off-by:
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by:
-
- 08 Jan, 2016 2 commits
-
-
Kamal Mostafa authored
commit f6ba98c5 upstream. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Roberta Dobrescu <roberta.dobrescu@gmail.com> Link: http://lkml.kernel.org/r/1447280736-2161-2-git-send-email-kamal@canonical.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Kamal Mostafa authored
Signed-off-by:
-
- 06 Jan, 2016 17 commits
-
-
Doron Tsur authored
commit 50a9eea6 upstream. On change mtu the driver compares between hardware queried mtu and software requested mtu. We need to compare between software representation of the queried mtu and the requested mtu. Fixes: facc9699 ('net/mlx5e: Fix HW MTU settings') Signed-off-by:
Doron Tsur <doront@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Andrew Honig authored
commit 0185604c upstream. Currently if userspace restores the pit counters with a count of 0 on channels 1 or 2 and the guest attempts to read the count on those channels, then KVM will perform a mod of 0 and crash. This will ensure that 0 values are converted to 65536 as per the spec. This is CVE-2015-7513. Signed-off-by:
Andy Honig <ahonig@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
David Howells authored
commit b4a1b4f5 upstream. This fixes CVE-2015-7550. There's a race between keyctl_read() and keyctl_revoke(). If the revoke happens between keyctl_read() checking the validity of a key and the key's semaphore being taken, then the key type read method will see a revoked key. This causes a problem for the user-defined key type because it assumes in its read method that there will always be a payload in a non-revoked key and doesn't check for a NULL pointer. Fix this by making keyctl_read() check the validity of a key after taking semaphore instead of before. I think the bug was introduced with the original keyrings code. This was discovered by a multithreaded test program generated by syzkaller (http://github.com/google/syzkaller). Here's a cleaned up version: #include <sys/types.h> #include <keyutils.h> #include <pthread.h> void *thr0(void *arg) { key_serial_t key = (unsigned long)arg; keyctl_revoke(key); return 0; } void *thr1(void *arg) { key_serial_t key = (unsigned long)arg; char buffer[16]; keyctl_read(key, buffer, 16); return 0; } int main() { key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING); pthread_t th[5]; pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key); pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key); pthread_join(th[0], 0); pthread_join(th[1], 0); pthread_join(th[2], 0); pthread_join(th[3], 0); return 0; } Build as: cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread Run as: while keyctl-race; do :; done as it may need several iterations to crash the kernel. The crash can be summarised as: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff81279b08>] user_read+0x56/0xa3 ... Call Trace: [<ffffffff81276aa9>] keyctl_read_key+0xb6/0xd7 [<ffffffff81277815>] SyS_keyctl+0x83/0xe0 [<ffffffff815dbb97>] entry_SYSCALL_64_fastpath+0x12/0x6f Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit c6ff5268 ] The commit ba7c95ea ("rhashtable: Fix sleeping inside RCU critical section in walk_stop") introduced a new spinlock for the walker list. However, it did not convert all existing users of the list over to the new spin lock. Some continued to use the old mutext for this purpose. This obviously led to corruption of the list. The fix is to use the spin lock everywhere where we touch the list. This also allows us to do rcu_rad_lock before we take the lock in rhashtable_walk_start. With the old mutex this would've deadlocked but it's safe with the new spin lock. Fixes: ba7c95ea ("rhashtable: Fix sleeping inside RCU...") Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 07e100f9 ] Yuchung tracked a regression caused by commit 57be5bda ("ip: convert tcp_sendmsg() to iov_iter primitives") for TCP Fast Open. Some Fast Open users do not actually add any data in the SYN packet. Fixes: 57be5bda ("ip: convert tcp_sendmsg() to iov_iter primitives") Reported-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
-
Rainer Weikusat authored
[ Upstream commit 3822b5c2 ] With b3ca9b02, the AF_UNIX SOCK_STREAM receive code was changed from using mutex_lock(&u->readlock) to mutex_lock_interruptible(&u->readlock) to prevent signals from being delayed for an indefinite time if a thread sleeping on the mutex happened to be selected for handling the signal. But this was never a problem with the stream receive code (as opposed to its datagram counterpart) as that never went to sleep waiting for new messages with the mutex held and thus, wouldn't cause secondary readers to block on the mutex waiting for the sleeping primary reader. As the interruptible locking makes the code more complicated in exchange for no benefit, change it back to using mutex_lock. Signed-off-by:
Rainer Weikusat <rweikusat@mobileactivedefense.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 3036facb ] fou->udp_offloads is managed by RCU. As it is actually included inside the fou sockets, we cannot let the memory go out of scope before a grace period. We either can synchronize_rcu or switch over to kfree_rcu to manage the sockets. kfree_rcu seems appropriate as it is used by vxlan and geneve. Fixes: 23461551 ("fou: Support for foo-over-udp RX path") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Hamish Martin authored
[ Upstream commit 7bff47da ] After commit 15bf176d ("gianfar: Don't enable the Filer w/o the Parser"), 'TSEC' model controllers (for example as seen on MPC8541E) always have 8 bytes stripped from the front of received frames. Only 'eTSEC' gianfar controllers have the RX Filer capability (amongst other enhancements). Previously this was treated as always enabled for both 'TSEC' and 'eTSEC' controllers. In commit 15bf176d ("gianfar: Don't enable the Filer w/o the Parser") a subtle change was made to the setting of 'uses_rxfcb' to effectively always set it (since 'rx_filer_enable' was always true). This had the side-effect of always stripping 8 bytes from the front of received frames on 'TSEC' type controllers. We now only enable the RX Filer capability on controller types that support it, thereby avoiding the issue for 'TSEC' type controllers. Reviewed-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by:
Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 3a324606 ] William Hua <william.hua@canonical.com> wrote: > > I wasn't aware there was an enforced minimum size. I simply set the > nelem_hint in the rhastable_params struct to 1, expecting it to grow as > needed. This caused a segfault afterwards when trying to insert an > element. OK we're doing the size computation before we enforce the limit on min_size. ---8<--- We need to do the initial hash table size computation after we have obtained the correct min_size/max_size parameters. Otherwise we may end up with a hash table whose size is outside the allowed envelope. Fixes: a998f712 ("rhashtable: Round up/down min/max_size to...") Reported-by:
William Hua <william.hua@canonical.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 9b29c696 ] Bjørn reported that while we switch all interfaces to privacy stable mode when setting the secret, we don't set this mode for new interfaces. This does not make sense, so change this behaviour. Fixes: 622c81d5 ("ipv6: generation of stable privacy addresses for link-local and autoconf") Reported-by:
-
tadeusz.struk@intel.com authored
[ Upstream commit 130ed5d1 ] msg_iocb needs to be initialized on the recv/recvfrom path. Otherwise afalg will wrongly interpret it as an async call. Reported-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 5233252f ] Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 225734de ] Stas Nichiporovich reported a regression in his HFSC qdisc setup on a non multi queue device. It turns out I mistakenly added a TCQ_F_NOPARENT flag on all qdisc allocated in qdisc_create() for non multi queue devices, which was rather buggy. I was clearly mislead by the TCQ_F_ONETXQUEUE that is also set here for no good reason, since it only matters for the root qdisc. Fixes: 4eaf3b84 ("net_sched: fix qdisc_tree_decrease_qlen() races") Reported-by:
Stas Nichiporovich <stasn77@gmail.com> Tested-by:
-
WANG Cong authored
[ Upstream commit ac5cc977 ] Dmitry reported the following out-of-bound access: Call Trace: [<ffffffff816cec2e>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:294 [<ffffffff84affb14>] sock_setsockopt+0x1284/0x13d0 net/core/sock.c:880 [< inline >] SYSC_setsockopt net/socket.c:1746 [<ffffffff84aed7ee>] SyS_setsockopt+0x1fe/0x240 net/socket.c:1729 [<ffffffff85c18c76>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185 This is because we mistake a raw socket as a tcp socket. We should check both sk->sk_type and sk->sk_protocol to ensure it is a tcp socket. Willem points out __skb_complete_tx_timestamp() needs to fix as well. Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit f6548615 ] skb_reorder_vlan_header is called after the vlan header has been pulled. As a result the offset of the begining of the mac header has been incrased by 4 bytes (VLAN_HLEN). When moving the mac addresses, include this incrase in the offset calcualation so that the mac addresses are copied correctly. Fixes: a6e18ff1 (vlan: Fix untag operations of stacked vlans with REORDER_HEADER off) CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by:
Vladislav Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit a6e18ff1 ] When we have multiple stacked vlan devices all of which have turned off REORDER_HEADER flag, the untag operation does not locate the ethernet addresses correctly for nested vlans. The reason is that in case of REORDER_HEADER flag being off, the outer vlan headers are put back and the mac_len is adjusted to account for the presense of the header. Then, the subsequent untag operation, for the next level vlan, always use VLAN_ETH_HLEN to locate the begining of the ethernet header and that ends up being a multiple of 4 bytes short of the actuall beginning of the mac header (the multiple depending on the how many vlan encapsulations ethere are). As a reslult, if there are multiple levles of vlan devices with REODER_HEADER being off, the recevied packets end up being dropped. To solve this, we use skb->mac_len as the offset. The value is always set on receive path and starts out as a ETH_HLEN. The value is also updated when the vlan header manupations occur so we know it will be correct. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 09ccfd23 ] Reported-by:
Dmitry Vyukov <dvyukov@gmail.com> Signed-off-by:
-
