- 09 Aug, 2017 39 commits
-
-
Daniel Mentz authored
Commit b2787845 ("V4L/DVB (5289): Add support for video output overlays.") added the field global_alpha to struct v4l2_window but did not update the compat layer accordingly. This change adds global_alpha to struct v4l2_window32 and copies the value for global_alpha back and forth. Signed-off-by:
Daniel Mentz <danielmentz@google.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Dan Carpenter authored
These can only be accessed with CAP_SYS_ADMIN so it's not a critical security issue. The problem is that "page" is controlled by the user in the ioctl(). The test to see if the bit is set in state->info->page_mask is not sufficient because "page" can be very high and shift wrap around to a bit which is set. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Julia Lawall authored
vpbe_dev_ops is only copied into the ops field at the end of a vpbe_device structure, so it can be const. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Anton Sviridenko authored
24 GPIO pins from 32 available on solo6x10 chips are exported to gpiolib. First 8 GPIOs are reserved for internal use on capture card boards, GPIOs in range 8:15 are configured as outputs to control relays, remaining 16:31 are configured as inputs to read sensor states. Now with this patch userspace DVR software can switch relays and read sensor states when GPIO extension cards are attached to Softlogic solo6x10 based video capture cards. Signed-off-by:
Anton Sviridenko <anton@corp.bluecherry.net> Signed-off-by:
Ismael Luceno <ismael@iodev.co.uk> Signed-off-by:
-
Peter Rosin authored
No one cares anyway. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Peter Rosin authored
While at it, change the type of the previously always-zero i2c_rc member to int, matching the returned type from i2c_add_adapter. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <media/drv-intf/saa7146.h> and <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. So making 'pci_tbl' as const member of 'struct saa7146_extension'. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
-
Hans Verkuil authored
If cec_debug >= 1 then log why the requested mode returned -EINVAL. It can be hard to debug this since -EINVAL can be returned for many reasons. So this should help. Signed-off-by:
-
Hans Verkuil authored
The description of how messages are processed by the core was not always very clear. Reword it to improve this. In particular for the USER_CONTROL_* messages a critical bit was missing in that the core also checks for the CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU flag. This was confusing. Signed-off-by:
-
Hans Verkuil authored
`CEC_LOG_ADDRS_FL_CDC_ONLY` should be ``CEC_LOG_ADDRS_FL_CDC_ONLY``. Signed-off-by:
-
Hans Verkuil authored
Use the new CEC_CAP_DEFAULTS define in the adv, vivid, pulse8 and rainshadow CEC drivers. Signed-off-by:
-
Hans Verkuil authored
The CEC_CAP_LOG_ADDRS, CEC_CAP_TRANSMIT, CEC_CAP_PASSTHROUGH and CEC_CAP_RC capabilities are normally always present. Add a CEC_CAP_DEFAULTS define that ORs these four caps to simplify drivers. Signed-off-by:
-
Hans Verkuil authored
gcc can get confused by this code and it thinks dev_features can be returned uninitialized. So initialize to NULL at the beginning to shut up the warning. Signed-off-by:
-
- 08 Aug, 2017 1 commit
-
-
Hans Verkuil authored
The SMPTE-2084 transfer functions maps to the luminance range of 0-10000 cd/m^2. Other transfer functions use the traditional range of 0-100 cd/m^2. I didn't take this into account so the luminance was off by a factor of 100. Since qv4l2 made the same mistake in reverse I never noticed this until I tested with actual SMPTE-2084 video. Signed-off-by:
-
