'default n' is a default behaviour of Kconfig options. So, remove
explicit line from Kconfig.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

linux/io.h defines readq() and ioremap_nocache() / iounmap() functions.

If not included, the build fails:

intel_telemetry_pltdrv.c:1165:31: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
intel_telemetry_pltdrv.c:1165:33: error: implicit declaration of function 'ioremap_nocache' [-Werror=implicit-function-declaration]
intel_telemetry_pltdrv.c:1202:3: error: implicit declaration of function 'iounmap' [-Werror=implicit-function-declaration]
intel_telemetry_pltdrv.c:900:20: error: implicit declaration of function 'readq' [-Werror=implicit-function-declaration]

Fix this by including linux/io.h.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Currently, update_no_reboot_bit() function implemented in this driver
uses mutex_lock() to protect its register updates. But this function is
called with in atomic context in iTCO_wdt_start() and iTCO_wdt_stop()
functions in iTCO_wdt.c driver, which in turn causes "sleeping into
atomic context" issue. This patch fixes this issue by replacing the
mutex_lock() with spin_lock() to protect the GCR read/write/update APIs.

Fixes: 9d855d46 ("platform/x86: intel_pmc_ipc: Fix iTCO_wdt GCS memory mapping failure")
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kupuswamy@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Removes unnecessary header files included in the driver and sorts the
remaining ones in the alphabetical order.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Telemetry word is misspelled several times in this file as Telemtry. This
fixes the spelling mistake and folds in another minor typo.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Intel Telemetry driver depends on IPC1 interface. If IPC1 interface is
disabled on a given platform by the system firmware, the driver does not
load but prints misleading information in the dmesg logs.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The functions cht_int33fe_check_for_max17047 and cht_int33fe_find_max17047
are local to the source and do not need to be in global scope, so make
them static.

Cleans up sparse warnings:
symbol 'cht_int33fe_check_for_max17047' was not declared. Should it be
static?
symbol 'cht_int33fe_find_max17047' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The structures mlxplat_dev and mlxplat_hotplug are local to the source
and do not need to be in global scope, so make them static.

Cleans up sparse warnings:
symbol 'mlxplat_dev' was not declared. Should it be static?
symbol 'mlxplat_hotplug' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Add touchscreen platform data for the Chuwi Hi8 Pro tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

This patch removes the FSF address from the GPL notice to fix a
checkpatch.pl CHECK message.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There are fields in the struct ips_mcp_limits which are not used
anywhere and a label which we may get rid of.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

...instead of keeping pointer to struct pci_dev.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Intel vendor ID is defined globally, thus we may use PCI_VDEVICE().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This makes code cleaner.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Use devm_ and pcim_ functions to make error handling
simpler and code smaller and tidier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add an entry to make myself the maintainer of the PEAQ WMI hotkeys driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

It seems that the WMI GUID used by the PEAQ 2-in-1 WMI hotkeys is not
as unique as a GUID should be and is used on some other devices too.

This is causing spurious key-press reports on these other devices.

This commits adds a DMI check to the PEAQ 2-in-1 WMI hotkeys driver to
ensure that it is actually running on a PEAQ 2-in-1, fixing the
spurious key-presses on these other devices.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1497861
BugLink: https://bugzilla.suse.com/attachment.cgi?id=743182
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

In favour of new approach this reverts commit
ff74972e.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

peaq-wmi on Lenovo ideapad 700-15ISK keeps sending KEY_SOUND,
which makes user's repeated keys gets interrupted.

The system does not have Dolby button, let's blacklist it.

BugLink: https://bugs.launchpad.net/bugs/1720219Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This patch cleans up unnecessary free/alloc calls in ipc_plat_probe(),
ipc_pci_probe() and ipc_plat_get_res() functions by using devm_*
calls.

This patch also adds proper error handling for failure cases in
ipc_pci_probe() function.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
[andy: fixed style issues, missed devm_free_irq(), removed unnecessary log message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Many thinkpad laptops and convertibles provide the GMMS method to
resolve how far the laptop has been opened and whether it has been
converted into tablet mode. This allows reporting a more precise tablet
mode state to userspace.

The current implementation only reports a summarized tablet mode state
which is triggered as soon as the input devices become unusable as they
are folded away from the display.

This will work on all models where the CMMD method was used previously and
it may also work in other cases.

Thanks to Peter Zhang of Lenovo for providing information on how to use the
GMMS method to query the tablet mode.
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Cc: Peter FP1 Zhang <zhangfp1@lenovo.com>
Cc: Lyude Paul <lyude@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

My Fujitsu-Siemens Lifebook S6120 doesn't have the FUJ02E3 device,
but it does have FUJ02B1. That means we do register the backlight
device (and it even seems to work), but the code will oops as soon
as we try to set the backlight brightness because it's trying to
call call_fext_func() with a NULL device. Let's just skip those
function calls when the FUJ02E3 device is not present.

Cc: Jonathan Woithe <jwoithe@just42.net>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # 4.13.x
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

device_create documentation says to cleanup using device_destroy
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

The initialize routine is:
* class -> bus -> platform

The exit routine is:
* platform -> class -> bus

Fix the exit routine to be:
* platform -> bus -> class
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

The include list is randomly assembled right now.  Sort in alphabetical
order.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

pr_fmt provides formatting to be used by the driver when
displaying errors and messages.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Pali Pohar <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

The descriptor GUID is not used to indicate that WMI notifications
in the dell-wmi driver work properly.  As such a modalias should
not be present that causes this driver to load on systems with this
GUID.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Pali Pohar <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

This driver serves the purpose of responding to WMI based notifications
from the DELL_EVENT_GUID (9DBB5994-A997-11DA-B012-B622A1EF5492).
Other GUIDs will be handled by separate drivers.

Update the language used by this driver to avoid future confusion.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Some Asus laptops (ROG series for example) are provided with a lightbar
behind the monitor. This patch make possible to switch it on and off.
This lightbar works exactly like any other led.
Signed-off-by: Maxime Bellengé <maxime.bellenge@gmail.com>
[dvhart: fix commit message format and variable declaration order]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

On Dell Latitude 7275 the 5-button array is not exposed in the ACPI
tables, but notififies are still sent to the Intel HID device object
(device ID INT33D5) in response to power button actions.  They were
ignored as the intel-hid driver was not prepared to take care of them
until recently.

Power button wakeup from suspend-to-idle was added in:

commit 635173a1 ("intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle")

However power button suspend doesn't work yet on this platform so it
would be good to add it also.

On the affected platform (for which priv->array is NULL), add a new
upfront check against the power button press notification (0xCE) to
notify_handler(), outside the wakeup mode this time, which allows
reporting the power button press event and triggers the suspend. Also
catch and ignore the corresponding power button release notification
(0xCF) to stop it from being reported as an "unknown event" in the logs.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=196115Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Acked-By: Mario Limonciello <mario.limonciello@dell.com>
[dvhart: minor coding style and commit message format fix]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

These were raised by Lukas Wunner as potential DOS attacks against
the system log by passing bad data to sysfs.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Use the standard ARRAY_SIZE() macro instead of the custom
TELEM_EVT_LEN().
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

At least one BIOS enumerates the max17047 both through the INT33FE ACPI
device (it is right there in the resources table) as well as through a
separate MAX17047 device.

This commit checks for the max17047 already being enumerated through
a separate MAX17047 ACPI device and if so it uses the i2c-client
instantiated for this and attaches the device-props for the max17047 to
that i2c-client.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Current implementations of Intel Thunderbolt controllers will go
into a low power mode when not in use.

Many machines containing these controllers also have a GPIO wired up
that can force the controller awake.  This is offered via a ACPI-WMI
interface intended to be manipulated by a userspace utility.

This mechanism is provided by Intel to OEMs to include in BIOS.
It uses an industry wide GUID that is populated in a separate _WDG
entry with no binary MOF.

This interface allows software such as fwupd to wake up thunderbolt
controllers to query the firmware version or flash new firmware.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
[andy fixed merge conflicts and bump kernel version for ABI]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull UBI updates from Richard Weinberger:
 "Minor improvements"

* tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs:
  UBI: Fix two typos in comments
  ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate"
  ubi: pr_err() strings should end with newlines
  ubi: pr_err() strings should end with newlines
  ubi: pr_err() strings should end with newlines

Pull UML updates from Richard Weinberger:

 - minor improvements

 - fixes for Debian's new gcc defaults (pie enabled by default)

 - fixes for XSTATE/XSAVE to make UML work again on modern systems

* 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: return negative in tuntap_open_tramp()
  um: remove a stray tab
  um: Use relative modversions with LD_SCRIPT_DYN
  um: link vmlinux with -no-pie
  um: Fix CONFIG_GCOV for modules.
  Fix minor typos and grammar in UML start_up help
  um: defconfig: Cleanup from old Kconfig options
  um: Fix FP register size for XSTATE/XSAVE

Pull networking fixes from David Miller:

 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger.

 2) Fix double-free in rmnet driver, from Dan Carpenter.

 3) INET connection socket layer can double put request sockets, fix
    from Eric Dumazet.

 4) Don't match collect metadata-mode tunnels if the device is down,
    from Haishuang Yan.

 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in
    be2net driver, from Suresh Reddy.

 6) Fix scaling error in gen_estimator, from Eric Dumazet.

 7) Fix 64-bit statistics deadlock in systemport driver, from Florian
    Fainelli.

 8) Fix use-after-free in sctp_sock_dump, from Xin Long.

 9) Reject invalid BPF_END instructions in verifier, from Edward Cree.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  mlxsw: spectrum_router: Only handle IPv4 and IPv6 events
  Documentation: link in networking docs
  tcp: fix data delivery rate
  bpf/verifier: reject BPF_ALU64|BPF_END
  sctp: do not mark sk dumped when inet_sctp_diag_fill returns err
  sctp: fix an use-after-free issue in sctp_sock_dump
  netvsc: increase default receive buffer size
  tcp: update skb->skb_mstamp more carefully
  net: ipv4: fix l3slave check for index returned in IP_PKTINFO
  net: smsc911x: Quieten netif during suspend
  net: systemport: Fix 64-bit stats deadlock
  net: vrf: avoid gcc-4.6 warning
  qed: remove unnecessary call to memset
  tg3: clean up redundant initialization of tnapi
  tls: make tls_sw_free_resources static
  sctp: potential read out of bounds in sctp_ulpevent_type_enabled()
  MAINTAINERS: review Renesas DT bindings as well
  net_sched: gen_estimator: fix scaling error in bytes/packets samples
  nfp: wait for the NSP resource to appear on boot
  nfp: wait for board state before talking to the NSP
  ...

Pull more input updates from Dmitry Torokhov:
 "A second round of updates for the input subsystem:

   - a new driver for PWM-controlled vibrators

   - ucb1400 touchscreen driver had completely busted suspend/resume
     handling

   - we now handle "home" button found on some devices with Goodix
     touchscreens

   - assorted other fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Gigabyte P57 to the keyboard reset table
  Input: xpad - validate USB endpoint type during probe
  Input: ucb1400_ts - fix suspend and resume handling
  Input: edt-ft5x06 - fix access to non-existing register
  Input: elantech - make arrays debounce_packet static, reduces object code size
  Input: surface3_spi - make const array header static, reduces object code size
  Input: goodix - add support for capacitive home button
  Input: add a driver for PWM controllable vibrators
  Input: adi - make array seq static, reduces object code size

Commit 5620a0d1 ("firmware: delete in-kernel firmware") removed the
entire firmware directory.  Unfortunately it thereby also removed the
support for built-in firmware.

This restores the ability to build firmware directly into the kernel by
pruning the original Makefile to the necessary minimum.  The default for
EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/.

Fixes: 5620a0d1 ("firmware: delete in-kernel firmware")
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Greg K-H <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>