Move the copyright information from hwrdv_apci3501.c to the main
driver file. Reformat it to fix the > 80 char lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the analog output subdevice has two support functions:
  (*insn_config) - i_APCI3501_ConfigAnalogOutput()
  (*insn_write)  - i_APCI3501_WriteAnalogOutput()

The (*insn_config) function is used to configure the analog outputs
in either bipolar or unipolar mode. This function abuses the comedi
API since it treats the data[0] value as a parameter instead of as
the config "instruction".

The (*insn_write) function then writes a single value to the desired
analog output channel after doing some sanity checking on the channel
number. The sanity checking is not required since the comedi core has
already done it. Also, the (*insn_write) functions are supposed to
write all the data, indicated by insn->n, to the channel not just a
single value.

Rewrite the support code so it works properly with the comedi API.

The bipolar/unipolar configuration can be determine in the (*insn_write)
by checking the passed insn->chanspec.

Since the unipolar configuration only has 13-bit resolution, we need
to check that the data is in range because the subdevice 'maxdata' is
set to 14-bits for the bipolar mode. If the data is out of range,
output a dev_warn() and return -EINVAL.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the CamelCase local variables.

Refactor the code a bit to remove the need for some of the local
variables.

Add a couple defines to the register map to help make the code
more concise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor the code that waits for the DAC to be ready into a helper
function.

A timeout of some sort should be added to this helper so code the
users to expect the error condition. In i_APCI3501_WriteAnalogOutput()
just return the error and don't actually write the new value to the
DAC. In apci3501_reset() output a dev_warn() that the DAC was not
ready.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the analog output range definition from hwdrv_apci3501.c into
the main driver file.

For aesthetic reasons, rename the range table so it has namespace
associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the private struct definition and the #include of the
low-level support code to prepare for merging the code in
hwdrv_apci3501.c into the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Create, and use, defines for the analog output and digital i/o
registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Create a struct to hold the private data still used by this driver.
This removes the last dependencies on the addi-data "common" code
so we can also remove the #include of addi_common.h.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The addi-data "common" code always allocated 7 subdevices. This
driver only uses 5. Change the allocation and remove the unused
subdevices.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With the eeprom support code now local to this driver, we can
remove the boardinfo since it's not necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The only value in the eeprom that is used by this driver is the
number of analog output channels.

Copy the necessary code from addi_eeprom.c to this driver and
refactor it so that we can get the value needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board supported by this driver has an on-board eeprom. Since
we need to read it to get the number of analog output channels,
expose the eeprom as a readable subdevice to the user.

Rename the i_ADDIDATA_InsnReadEeprom() function to give it namespace
associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is not need to pass the analog output subdevice information
in the boardinfo. Just initialize the subdevice directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog outputs of this board are always 14-bit. Remove this
information from the boardinfo and just set the 'maxdata' directly
in the subdevice init. Initialize with a hex value as that is more
standard in the comedi drivers.

Since devpriv->s_EeParameters.i_AoMaxdata is not longer being used,
don't bother initializing it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver only uses PCI bar 0 and 1, don't bother reading the
unused PCI bars.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board supported by this driver does not use dma. Remove the
unnecessary initialization of devpriv->s_EeParameters.i_Dma.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The iobase address stored in devpriv->iobase is also stored in
dev->iobase. Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board supported by this driver has an eeprom connected to an
AMCC S5933 PCI controller chip. Knowing this, we can simplify the
code that reads the PCI bars to get the iobase addresses used in
the driver.

Also, since the dw_AiBase is not ioremap'ed, we can remove the
iounmap in the detach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver needs to read the on-board eeprom to determine the
number of analog output channels (4 or 8) on the board. But,
sinde we know the board has an eeprom and the PCI controller
chip is an AMCC S5933, we can simplify the code and remove the
code that sets the extra wait state neede for the AMCC S5920.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver only has one 'interrupt' function. Absorb the
v_APCI3501_Interrupt() function from hwdrv_apci3501.c into
the driver.

Rename v_ADDI_Interrupt() to apci3501_interrupt() so that the
function has namespace associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver only has one 'reset' function. Absorb the i_APCI3501_Reset()
function from hwdrv_apci3501.c into the driver.

Rename i_ADDI_Reset() to apci3501_reset() so that the function has
namespace associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board supported by this driver does not have analog inputs. Remove
the subdevice init for it.

Since the devpriv->s_EeParameters for the analog input subdevice are
not used, remove the initialization of them also.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board supported by this driver has 2 digital input. Remove the
conditional and always init the subdevice.

Also, move the subdevice insn_bits function pointer as well as the
n_chan out of the boardinfo and use them to initialize the subdevice
directly.

Since devpriv->s_EeParameters.i_NbrDiChannel for the digital input
subdevice is no longer being used, remove initialization of it also.

Copy the apci3501_di_insn_bits() function from hwrdv_apci3501.c into
the main driver file.

Fix the subdev_flags for the subdevice. The only required flag is
SDF_READABLE. The SDF_GROUND and SDF_COMMON flags only have meaning
for analog subdevices.

Remove the len_chanlist initialization, it only has meaning for subdevices
that support commands.

Remove the io_bits initialization, it only has meaning for digital i/o
subdevices that have configurable outputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board supported by this driver has 2 digital outputs. Remove the
conditional and always init the subdevice.

Also, move the subdevice insn_bits function pointer as well as the
n_chan out of the boardinfo and use them to initialize the subdevice
directly.

Since devpriv->s_EeParameters for the digital output subdevice are no
longer being used, remove initialization of them also.

Copy the apci3501_do_insn_bits() function from hwrdv_apci3501.c into
the main driver file.

Fix the subdev_flags for the subdevice. The only required flag is
SDF_WRITEABLE. The SDF_GROUND and SDF_COMMON flags only have meaning
for analog subdevices and the SDF_READABLE flag is not required.

Fix the maxdata for the subdevice. Digital outputs can only be 1 or 0.

Remove the len_chanlist initialization, it only has meaning for subdevices
that support commands.

Remove the io_bits initialization, it only has meaning for digital i/o
subdevices that have configurable outputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board supported by this driver has a timer device. Remove the
conditional and always init the subdevice.

Also, move the subdevice insn_* function pointers out of the
boardinfo and use them to initialize the subdevice directly.

Since devpriv->s_EeParameters.i_Timer is not longer being used,
remove its initialization also.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board supported by this driver does not have ttl i/o. Remove the
subdevice init for it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver is for a simple analog output board with 4 or 8, 14-bit
outputs. The board also has 4 digital i/o channels (2 out/2 in) as
well as a watchdog or timer. Using the addi-data "common" code in
this driver introduces a lot of bloat.

Copy the code in addi_common.c to this driver and remove the #include
that caused it to be compiled with the driver. This will allow removing
the bloat.

Rename the auto_attach and detach functions so they have namespace
associated with this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of coding calling comedi_driver_(un)register and
usb_(de)register directly we can use the comedi_usb_driver_(un)register
wrapper.
This removes some boilerplate and is less error prone.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace raw constant 12 with PAGE_SHIFT to fix non-x86 arches and
provoke build failure if PAGE_SHIFT is too big
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As part of transition caused due to acquisition of Ozmo Devices by Atmel,
my email address is changed.
Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed myself (ckelly@ozmodevices.com) as maintainer of ozwpan.
Removed my email address from the TODO file.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If we don't restrict "cp.channum" to 3 digits then the sprintf() will
overflow.  I've added a check and changed the sprintf() to snprintf().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch was totally wrong and is reverted.

The problem was ultimately fixed by upstream commit.
1ee4c55f
staging: vt6656: Fix inconsistent structure packing
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: stable@vger.kernel.org # 3.8
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch is wrong and is partially reverted.

The NULL check of pTransmitKey->pvKeyTable is kept.

The problem was ultimately fixed by upstream commit.
1ee4c55f
staging: vt6656: Fix inconsistent structure packing
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: stable@vger.kernel.org # 3.8
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fold together the NAND driver for Goldfish from Arve with cleanups by
Jun Nakajima and a tidy up to 3.7 and checkpatch.

This provides a virtual flash driver for the Goldfish Android Virtual Platform,
and which is normally used as the root file system when testing emulated
devices.
Signed-off-by: Mike A. Chan <mikechan@google.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
[Ported to handle x86]
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
[Ported to 3.4]
Signed-off-by: Tom Keel <thomas.keel@intel.com>
[Ported to 3.7 and tided for checkpatch etc]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

(remove change to another file that escaped into the patch set)

From: Mike Lockwood <lockwood@google.com>

Provide a simple audio channel between the kernel and the emulator that host
sit. Queued for staging right now as this ought to be an ALSA driver not
just a dumb device of its own making.
Signed-off-by: Mike A. Chan <mikechan@google.com>
[x86 support]
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
[Clean up]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Note a point in the pipe driver that wants future attention
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A QEMU pipe is a very fast communication channel between the
guest system and the emulator. Usage from the guest is simply
something like;

  // connect to special device
  fd = open("/dev/qemu_pipe", O_RDWR);

  // tell which service we want to talk to (must be zero-terminated)
  write(fd, "pipeName", strlen("pipeName")+1);

  // do read()/write() through fd now
  ...

  // close channel
  close(fd);
Signed-off-by: David 'Digit' Turner <digit@android.com>
[Added support for parameter buffers for speed]
igned-off-by: Xin, Xiaohui <xiaohui.xin@intel.com>
Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Nakajima, Jun <jun.nakajima@intel.com>
[Ported to 3.6]
Signed-off-by: Tom Keel <thomas.keel@intel.com>
[Ported to 3.7, moved to platform/goldfish]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This imports the current Google code and cleans it up slightly to use pr_ and
to properly request its resources.

Goldfish is an emulator used for Android development. It has a virtual bus where
the emulator passes platform device information to the guest which then creates
the appropriate devices.

This part of the emulation is not architecture specific so should not be hiding
in architecture trees as it does in the Google Android tree. The constants it
uses do depend on the platform and the platform creates the bus device which then
talks to the emulator to ascertain the actual devices present.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
[Moved out of x86, cleaned up headers]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Dan Carpenter has pointed out that there are several sparse warnings
from et131x.c, listed below. This patch fixes all these errors.

drivers/staging/et131x/et131x.c:1870:33: warning: incorrect type in assignment (different address spaces)
drivers/staging/et131x/et131x.c:1870:33:    expected unsigned int [usertype] *num_des
drivers/staging/et131x/et131x.c:1870:33:    got unsigned int [noderef] <asn:2>*<noident>
drivers/staging/et131x/et131x.c:1871:37: warning: incorrect type in assignment (different address spaces)
drivers/staging/et131x/et131x.c:1871:37:    expected unsigned int [usertype] *full_offset
drivers/staging/et131x/et131x.c:1871:37:    got unsigned int [noderef] <asn:2>*<noident>
drivers/staging/et131x/et131x.c:1872:33: warning: incorrect type in assignment (different address spaces)
drivers/staging/et131x/et131x.c:1872:33:    expected unsigned int [usertype] *min_des
drivers/staging/et131x/et131x.c:1872:33:    got unsigned int [noderef] <asn:2>*<noident>
drivers/staging/et131x/et131x.c:1873:33: warning: incorrect type in assignment (different address spaces)
drivers/staging/et131x/et131x.c:1873:33:    expected unsigned int [usertype] *base_hi
drivers/staging/et131x/et131x.c:1873:33:    got unsigned int [noderef] <asn:2>*<noident>
drivers/staging/et131x/et131x.c:1874:33: warning: incorrect type in assignment (different address spaces)
drivers/staging/et131x/et131x.c:1874:33:    expected unsigned int [usertype] *base_lo
drivers/staging/et131x/et131x.c:1874:33:    got unsigned int [noderef] <asn:2>*<noident>
drivers/staging/et131x/et131x.c:1876:33: warning: incorrect type in assignment (different address spaces)
drivers/staging/et131x/et131x.c:1876:33:    expected unsigned int [usertype] *num_des
drivers/staging/et131x/et131x.c:1876:33:    got unsigned int [noderef] <asn:2>*<noident>
drivers/staging/et131x/et131x.c:1877:37: warning: incorrect type in assignment (different address spaces)
drivers/staging/et131x/et131x.c:1877:37:    expected unsigned int [usertype] *full_offset
drivers/staging/et131x/et131x.c:1877:37:    got unsigned int [noderef] <asn:2>*<noident>
drivers/staging/et131x/et131x.c:1878:33: warning: incorrect type in assignment (different address spaces)
drivers/staging/et131x/et131x.c:1878:33:    expected unsigned int [usertype] *min_des
drivers/staging/et131x/et131x.c:1878:33:    got unsigned int [noderef] <asn:2>*<noident>
drivers/staging/et131x/et131x.c:1879:33: warning: incorrect type in assignment (different address spaces)
drivers/staging/et131x/et131x.c:1879:33:    expected unsigned int [usertype] *base_hi
drivers/staging/et131x/et131x.c:1879:33:    got unsigned int [noderef] <asn:2>*<noident>
drivers/staging/et131x/et131x.c:1880:33: warning: incorrect type in assignment (different address spaces)
drivers/staging/et131x/et131x.c:1880:33:    expected unsigned int [usertype] *base_lo
drivers/staging/et131x/et131x.c:1880:33:    got unsigned int [noderef] <asn:2>*<noident>
drivers/staging/et131x/et131x.c:1898:24: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/et131x/et131x.c:1898:24:    expected void volatile [noderef] <asn:2>*addr
drivers/staging/et131x/et131x.c:1898:24:    got unsigned int [usertype] *base_hi
drivers/staging/et131x/et131x.c:1900:24: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/et131x/et131x.c:1900:24:    expected void volatile [noderef] <asn:2>*addr
drivers/staging/et131x/et131x.c:1900:24:    got unsigned int [usertype] *base_lo
drivers/staging/et131x/et131x.c:1901:60: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/et131x/et131x.c:1901:60:    expected void volatile [noderef] <asn:2>*addr
drivers/staging/et131x/et131x.c:1901:60:    got unsigned int [usertype] *num_des
drivers/staging/et131x/et131x.c:1902:39: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/et131x/et131x.c:1902:39:    expected void volatile [noderef] <asn:2>*addr
drivers/staging/et131x/et131x.c:1902:39:    got unsigned int [usertype] *full_offset
drivers/staging/et131x/et131x.c:1910:24: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/et131x/et131x.c:1910:24:    expected void volatile [noderef] <asn:2>*addr
drivers/staging/et131x/et131x.c:1910:24:    got unsigned int [usertype] *min_des
drivers/staging/et131x/et131x.c:2583:32: warning: incorrect type in assignment (different address spaces)
drivers/staging/et131x/et131x.c:2583:32:    expected unsigned int [usertype] *offset
drivers/staging/et131x/et131x.c:2583:32:    got unsigned int [noderef] <asn:2>*<noident>
drivers/staging/et131x/et131x.c:2585:32: warning: incorrect type in assignment (different address spaces)
drivers/staging/et131x/et131x.c:2585:32:    expected unsigned int [usertype] *offset
drivers/staging/et131x/et131x.c:2585:32:    got unsigned int [noderef] <asn:2>*<noident>
drivers/staging/et131x/et131x.c:2602:24: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/et131x/et131x.c:2602:24:    expected void volatile [noderef] <asn:2>*addr
drivers/staging/et131x/et131x.c:2602:24:    got unsigned int [usertype] *offset
drivers/staging/et131x/et131x.c:4093:13: warning: symbol 'et131x_isr' was not declared. Should it be static?
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>