- 10 Feb, 2022 40 commits
-
-
David Matlack authored
Consolidate the large comment above DEFAULT_SPTE_HOST_WRITABLE with the large comment above is_writable_pte() into one comment. This comment explains the different reasons why an SPTE may be non-writable and KVM keeps track of that with the {Host,MMU}-writable bits. No functional change intended. Signed-off-by:David Matlack <dmatlack@google.com> Message-Id: <20220125230723.1701061-1-dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
Both "writeable" and "writable" are valid, but we should be consistent about which we use. DEFAULT_SPTE_MMU_WRITEABLE was the odd one out in the SPTE code, so rename it to DEFAULT_SPTE_MMU_WRITABLE. No functional change intended. Signed-off-by:
-
David Matlack authored
Move is_writable_pte() close to the other functions that check writability information about SPTEs. While here opportunistically replace the open-coded bit arithmetic in check_spte_writable_invariants() with a call to is_writable_pte(). No functional change intended. Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
-
David Matlack authored
Check SPTE writable invariants when setting SPTEs rather than in spte_can_locklessly_be_made_writable(). By the time KVM checks spte_can_locklessly_be_made_writable(), the SPTE has long been since corrupted. Note that these invariants only apply to shadow-present leaf SPTEs (i.e. not to MMIO SPTEs, non-leaf SPTEs, etc.). Add a comment explaining the restriction and only instrument the code paths that set shadow-present leaf SPTEs. To account for access tracking, also check the SPTE writable invariants when marking an SPTE as an access track SPTE. This also lets us remove a redundant WARN from mark_spte_for_access_track(). Suggested-by:
-
David Matlack authored
Move the WARNs in spte_can_locklessly_be_made_writable() to a separate helper function. This is in preparation for moving these checks to the places where SPTEs are set. Opportunistically add warning error messages that include the SPTE to make future debugging of these warnings easier. Suggested-by:
-
Wanpeng Li authored
As commit 0c5f81da ("KVM: LAPIC: Inject timer interrupt via posted interrupt") mentioned that the host admin should well tune the guest setup, so that vCPUs are placed on isolated pCPUs, and with several pCPUs surplus for *busy* housekeeping. In this setup, it is preferrable to disable mwait/hlt/pause vmexits to keep the vCPUs in non-root mode. However, if only some guests isolated and others not, they would not have any benefit from posted timer interrupts, and at the same time lose VMX preemption timer fast paths because kvm_can_post_timer_interrupt() returns true and therefore forces kvm_can_use_hv_timer() to false. By guaranteeing that posted-interrupt timer is only used if MWAIT or HLT are done without vmexit, KVM can make a better choice and use the VMX preemption timer and the corresponding fast paths. Reported-by:
Aili Yao <yaoaili@kingsoft.com> Reviewed-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1643112538-36743-1-git-send-email-wanpengli@tencent.com> Signed-off-by:
-
Wanpeng Li authored
When delivering a virtual interrupt, don't actually send a posted interrupt if the target vCPU is also the currently running vCPU and is IN_GUEST_MODE, in which case the interrupt is being sent from a VM-Exit fastpath and the core run loop in vcpu_enter_guest() will manually move the interrupt from the PIR to vmcs.GUEST_RVI. IRQs are disabled while IN_GUEST_MODE, thus there's no possibility of the virtual interrupt being sent from anything other than KVM, i.e. KVM won't suppress a wake event from an IRQ handler (see commit fdba608f, "KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU"). Eliding the posted interrupt restores the performance provided by the combination of commits 379a3c8e ("KVM: VMX: Optimize posted-interrupt delivery for timer fastpath") and 26efe2fd ("KVM: VMX: Handle preemption timer fastpath"). Thanks Sean for better comments. Suggested-by:
Chao Gao <chao.gao@intel.com> Reviewed-by:
-
Sean Christopherson authored
Massage SVM's implementation names that still diverge from kvm_x86_ops to allow for wiring up all SVM-defined functions via kvm-x86-ops.h. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Rename svm_vm_copy_asid_from() and svm_vm_migrate_from() to conform to the names used by kvm_x86_ops, and opportunistically use "sev" instead of "svm" to more precisely identify the role of the hooks. svm_vm_copy_asid_from() in particular was poorly named as the function does much more than simply copy the ASID. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use slightly more verbose names for the so called "memory encrypt", a.k.a. "mem enc", kvm_x86_ops hooks to bridge the gap between the current super short kvm_x86_ops names and SVM's more verbose, but non-conforming names. This is a step toward using kvm-x86-ops.h with KVM_X86_CVM_OP() to fill svm_x86_ops. Opportunistically rename mem_enc_op() to mem_enc_ioctl() to better reflect its true nature, as it really is a full fledged ioctl() of its own. Ideally, the hook would be named confidential_vm_ioctl() or so, as the ioctl() is a gateway to more than just memory encryption, and because its underlying purpose to support Confidential VMs, which can be provided without memory encryption, e.g. if the TCB of the guest includes the host kernel but not host userspace, or by isolation in hardware without encrypting memory. But, diverging from KVM_MEMORY_ENCRYPT_OP even further is undeseriable, and short of creating alises for all related ioctl()s, which introduces a different flavor of divergence, KVM is stuck with the nomenclature. Defer renaming SVM's functions to a future commit as there are additional changes needed to make SVM fully conforming and to match reality (looking at you, svm_vm_copy_asid_from()). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Remove SVM's MAX_INST_SIZE, which has long since been obsoleted by the common MAX_INSN_SIZE. Note, the latter's "insn" is also the generally preferred abbreviation of instruction. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Rename svm_flush_tlb() to svm_flush_tlb_current() so that at least one of the flushing operations in svm_x86_ops can be filled via kvm-x86-ops.h, and to document the scope of the flush (specifically that it doesn't flush "all"). Opportunistically make svm_tlb_flush_current(), was svm_flush_tlb(), static. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Move kvm_get_cs_db_l_bits() to SVM and rename it appropriately so that its svm_x86_ops entry can be filled via kvm-x86-ops, and to eliminate a superfluous export from KVM x86. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Massage VMX's implementation names for kvm_x86_ops to maximize use of kvm-x86-ops.h. Leave cpu_has_vmx_wbinvd_exit() as-is to preserve the cpu_has_vmx_*() pattern used for querying VMCS capabilities. Keep pi_has_pending_interrupt() as vmx_dy_apicv_has_pending_interrupt() does a poor job of describing exactly what is being checked in VMX land. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Define and use static_call()s for .vm_{copy,move}_enc_context_from(), mostly so that the op is defined in kvm-x86-ops.h. This will allow using KVM_X86_OP in vendor code to wire up the implementation. Any performance gains eeked out by using static_call() is a happy bonus and not the primary motiviation. Opportunistically refactor the code to reduce indentation and keep line lengths reasonable, and to be consistent when wrapping versus running a bit over the 80 char soft limit. Signed-off-by: -
Sean Christopherson authored
Drop the export of kvm_x86_ops now it is no longer referenced by SVM or VMX. Disallowing access to kvm_x86_ops is very desirable as it prevents vendor code from incorrectly modifying hooks after they have been set by kvm_arch_hardware_setup(), and more importantly after each function's associated static_call key has been updated. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Uninline and export Hyper-V's hv_track_root_tdp(), which is (somewhat indirectly) the last remaining reference to kvm_x86_ops from vendor modules, i.e. will allow unexporting kvm_x86_ops. Reloading the TDP PGD isn't the fastest of paths, hv_track_root_tdp() isn't exactly tiny, and disallowing vendor code from accessing kvm_x86_ops provides nice-to-have encapsulation of common x86 code (and of Hyper-V code for that matter). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Refactor the nested VMX PMU refresh helper to pass it a flag stating whether or not the vCPU has PERF_GLOBAL_CTRL instead of having the nVMX helper query the information by bouncing through kvm_x86_ops.pmu_ops. This will allow a future patch to use static_call() for the PMU ops without having to export any static call definitions from common x86, and it is also a step toward unexported kvm_x86_ops. Alternatively, nVMX could call kvm_pmu_is_valid_msr() to indirectly use kvm_x86_ops.pmu_ops, but that would incur an extra layer of indirection and would require exporting kvm_pmu_is_valid_msr(). Opportunistically rename the helper to keep line lengths somewhat reasonable, and to better capture its high-level role. No functional change intended. Cc: Like Xu <like.xu.linux@gmail.com> Signed-off-by:
-
Sean Christopherson authored
Use static_call() for invoking kvm_x86_ops function that already have a defined static call, mostly as a step toward having _all_ calls to kvm_x86_ops route through a static_call() in order to simplify auditing, e.g. via grep, that all functions have an entry in kvm-x86-ops.h, but also because there's no reason not to use a static_call(). Signed-off-by:
-
Sean Christopherson authored
Define and use a static_call() for kvm_x86_ops.vcpu_deliver_sipi_vector(), mostly so that the op is defined in kvm-x86-ops.h. This will allow using KVM_X86_OP in vendor code to wire up the implementation. Any performance gains eeked out by using static_call() is a happy bonus and not the primary motiviation. Signed-off-by:
-
Sean Christopherson authored
Use vmx_get_cpl() instead of bouncing through kvm_x86_ops.get_cpl() when performing a CPL check on MOV DR accesses. This avoids a RETPOLINE (when enabled), and more importantly removes a vendor reference to kvm_x86_ops and helps pave the way for unexporting kvm_x86_ops. Signed-off-by:
-
Sean Christopherson authored
Rename a variety of kvm_x86_op function pointers so that preferred name for vendor implementations follows the pattern <vendor>_<function>, e.g. rename .run() to .vcpu_run() to match {svm,vmx}_vcpu_run(). This will allow vendor implementations to be wired up via the KVM_X86_OP macro. In many cases, VMX and SVM "disagree" on the preferred name, though in reality it's VMX and x86 that disagree as SVM blindly prepended _svm to the kvm_x86_ops name. Justification for using the VMX nomenclature: - set_{irq,nmi} => inject_{irq,nmi} because the helper is injecting an event that has already been "set" in e.g. the vIRR. SVM's relevant VMCB field is even named event_inj, and KVM's stat is irq_injections. - prepare_guest_switch => prepare_switch_to_guest because the former is ambiguous, e.g. it could mean switching between multiple guests, switching from the guest to host, etc... - update_pi_irte => pi_update_irte to allow for matching match the rest of VMX's posted interrupt naming scheme, which is vmx_pi_<blah>(). - start_assignment => pi_start_assignment to again follow VMX's posted interrupt naming scheme, and to provide context for what bit of code might care about an otherwise undescribed "assignment". The "tlb_flush" => "flush_tlb" creates an inconsistency with respect to Hyper-V's "tlb_remote_flush" hooks, but Hyper-V really is the one that's wrong. x86, VMX, and SVM all use flush_tlb, and even common KVM is on a variant of the bandwagon with "kvm_flush_remote_tlbs", e.g. a more appropriate name for the Hyper-V hooks would be flush_remote_tlbs. Leave that change for another time as the Hyper-V hooks always start as NULL, i.e. the name doesn't matter for using kvm-x86-ops.h, and changing all names requires an astounding amount of churn. VMX and SVM function names are intentionally left as is to minimize the diff. Both VMX and SVM will need to rename even more functions in order to fully utilize KVM_X86_OPS, i.e. an additional patch for each is inevitable. No functional change intended. Signed-off-by: -
Sean Christopherson authored
Remove the export of kvm_x86_tlb_flush_current() as there are no longer any users outside of common x86 code. Signed-off-by:
-
Paolo Bonzini authored
Hypervisor leaves are always synthesized by __do_cpuid_func; just return zeroes and do not ask the host. Even on nested virtualization, a value from another hypervisor would be bogus, because all hypercalls and MSRs are processed by KVM. Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Jinrong Liang authored
The "unsigned long flags" parameter of kvm_pv_kick_cpu_op() is not used, so remove it. No functional change intended. Signed-off-by:
Jinrong Liang <cloudliang@tencent.com> Message-Id: <20220125095909.38122-20-cloudliang@tencent.com> Signed-off-by:
-
Jinrong Liang authored
The "struct kvm *kvm" parameter of kvm_make_vcpu_request() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm_vcpu *vcpu" parameter of kvm_scale_tsc() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "u16 tss_selector" parameter of task_switch_{16, 32}() is not used, so remove it. No functional change intended. Signed-off-by: -
Jinrong Liang authored
The "struct x86_emulate_ctxt *ctxt" parameter of setup_syscalls_segments() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "unsigned long addr" and "unsigned long length" parameter of ioapic_read_indirect() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "u32 addr" parameter of elcr_ioport_write() and elcr_ioport_read() is not used, so remove it. No functional change intended. Signed-off-by:
-
Paolo Bonzini authored
KVM performs the VMSAVE to the host save area for both regular and SEV-ES guests, so hoist it up to svm_prepare_guest_switch. And because sev_es_prepare_guest_switch does not really need to know the details of struct svm_cpu_data *, just pass it the pointer to the host save area inside the HSAVE page. Signed-off-by: -
Jinrong Liang authored
The "struct kvm_vcpu *vcpu" parameter of svm_check_exit_valid() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "int level" parameter of audit_spte_after_sync() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm *kvm" parameter of kvm_tdp_mmu_get_root() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm_vcpu *vcpu" parameter of reset_ept_shadow_zero_bits_mask() and reset_tdp_shadow_zero_bits_mask() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm *kvm" parameter of __rmap_write_protect() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm *kvm" parameter of kvm_mmu_unlink_parents() is not used, so remove it. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Bail from the APICv update paths _before_ taking apicv_update_lock if APICv is disabled at the module level. kvm_request_apicv_update() in particular is invoked from multiple paths that can be reached without APICv being enabled, e.g. svm_enable_irq_window(), and taking the rw_sem for write when APICv is disabled may introduce unnecessary contention and stalls. Signed-off-by:
-
Sean Christopherson authored
Drop the useless NULL check on kvm_x86_ops.check_apicv_inhibit_reasons when handling an APICv update, both VMX and SVM unconditionally implement the helper and leave it non-NULL even if APICv is disabled at the module level. The latter is a moot point now that __kvm_request_apicv_update() is called if and only if enable_apicv is true. No functional change intended. Signed-off-by:
-
