- 18 May, 2014 3 commits
-
-
Theodore Ts'o authored
commit 6e6358fc upstream. We haven't taken i_mutex yet, so we need to use i_size_read(). Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Matthew Wilcox authored
commit 9503c67c upstream. ext4_end_bio() currently throws away the error that it receives. Chances are this is part of a spate of errors, one of which will end up getting the error returned to userspace somehow, but we shouldn't take that risk. Also print out the errno to aid in debug. Signed-off-by:
Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by:
Jan Kara <jack@suse.cz> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Kazuya Mio authored
commit 4adb6ab3 upstream. When we try to get 2^32-1 block of the file which has the extent (ee_block=2^32-2, ee_len=1) with FIBMAP ioctl, it causes BUG_ON in ext4_ext_put_gap_in_cache(). To avoid the problem, ext4_map_blocks() needs to check the file logical block number. ext4_ext_put_gap_in_cache() called via ext4_map_blocks() cannot handle 2^32-1 because the maximum file logical block number is 2^32-2. Note that ext4_ind_map_blocks() returns -EIO when the block number is invalid. So ext4_map_blocks() should also return the same errno. Signed-off-by:
Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by:
-
- 30 Apr, 2014 37 commits
-
-
Ben Hutchings authored
-
Ben Hutchings authored
This reverts commit 584ec122, which was commit ddfadd77 upstream. It causes boot failure on 3.2 although no such problem occurs upstream. Reported-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Ben Hutchings authored
This reverts commit b93b90ff, which was commit 0ef38d70 upstream. It was intended to fix a regression which never occurred in 3.2.
-
Mikulas Patocka authored
commit 22c73795 upstream. This patch reorders reported frequencies from the highest to the lowest, just like in other frequency drivers. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> [bwh: Backported to 3.2: cpu_frequency_table::driver_data is called index] Signed-off-by:
-
Mikulas Patocka authored
commit d82b922a upstream. The powernow-k6 driver used to read the initial multiplier from the powernow register. However, there is a problem with this: * If there was a frequency transition before, the multiplier read from the register corresponds to the current multiplier. * If there was no frequency transition since reset, the field in the register always reads as zero, regardless of the current multiplier that is set using switches on the mainboard and that the CPU is running at. The zero value corresponds to multiplier 4.5, so as a consequence, the powernow-k6 driver always assumes multiplier 4.5. For example, if we have 550MHz CPU with bus frequency 100MHz and multiplier 5.5, the powernow-k6 driver thinks that the multiplier is 4.5 and bus frequency is 122MHz. The powernow-k6 driver then sets the multiplier to 4.5, underclocking the CPU to 450MHz, but reports the current frequency as 550MHz. There is no reliable way how to read the initial multiplier. I modified the driver so that it contains a table of known frequencies (based on parameters of existing CPUs and some common overclocking schemes) and sets the multiplier according to the frequency. If the frequency is unknown (because of unusual overclocking or underclocking), the user must supply the bus speed and maximum multiplier as module parameters. This patch should be backported to all stable kernels. If it doesn't apply cleanly, change it, or ask me to change it. Signed-off-by:
-
Mikulas Patocka authored
commit e20e1d0a upstream. I found out that a system with k6-3+ processor is unstable during network server load. The system locks up or the network card stops receiving. The reason for the instability is the CPU frequency scaling. During frequency transition the processor is in "EPM Stop Grant" state. The documentation says that the processor doesn't respond to inquiry requests in this state. Consequently, coherency of processor caches and bus master devices is not maintained, causing the system instability. This patch flushes the cache during frequency transition. It fixes the instability. Other minor changes: * u64 invalue changed to unsigned long because the variable is 32-bit * move the logic to set the multiplier to a separate function powernow_k6_set_cpu_multiplier * preserve lower 5 bits of the powernow port instead of 4 (the voltage field has 5 bits) * mask interrupts when reading the multiplier, so that the port is not open during other activity (running other kernel code with the port open shouldn't cause any misbehavior, but we should better be safe and keep the port closed) This patch should be backported to all stable kernels. If it doesn't apply cleanly, change it, or ask me to change it. Signed-off-by:
-
Paul Moore authored
commit f64410ec upstream. This patch is based on an earlier patch by Eric Paris, he describes the problem below: "If an inode is accessed before policy load it will get placed on a list of inodes to be initialized after policy load. After policy load we call inode_doinit() which calls inode_doinit_with_dentry() on all inodes accessed before policy load. In the case of inodes in procfs that means we'll end up at the bottom where it does: /* Default to the fs superblock SID. */ isec->sid = sbsec->sid; if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) { if (opt_dentry) { isec->sclass = inode_mode_to_security_class(...) rc = selinux_proc_get_sid(opt_dentry, isec->sclass, &sid); if (rc) goto out_unlock; isec->sid = sid; } } Since opt_dentry is null, we'll never call selinux_proc_get_sid() and will leave the inode labeled with the label on the superblock. I believe a fix would be to mimic the behavior of xattrs. Look for an alias of the inode. If it can't be found, just leave the inode uninitialized (and pick it up later) if it can be found, we should be able to call selinux_proc_get_sid() ..." On a system exhibiting this problem, you will notice a lot of files in /proc with the generic "proc_t" type (at least the ones that were accessed early in the boot), for example: # ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }' system_u:object_r:proc_t:s0 /proc/sys/kernel/shmmax However, with this patch in place we see the expected result: # ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }' system_u:object_r:sysctl_kernel_t:s0 /proc/sys/kernel/shmmax Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
Paul Moore <pmoore@redhat.com> Acked-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
-
Jiri Slaby authored
commit a94cdd1f upstream. In read_all_bytes, we do unsigned char i; ... bt->read_data[0] = BMC2HOST; bt->read_count = bt->read_data[0]; ... for (i = 1; i <= bt->read_count; i++) bt->read_data[i] = BMC2HOST; If bt->read_data[0] == bt->read_count == 255, we loop infinitely in the 'for' loop. Make 'i' an 'int' instead of 'char' to get rid of the overflow and finish the loop after 255 iterations every time. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Reported-and-debugged-by:
Rui Hui Dian <rhdian@novell.com> Cc: Tomas Cech <tcech@suse.cz> Cc: Corey Minyard <minyard@acm.org> Cc: <openipmi-developer@lists.sourceforge.net> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Qiang Huang authored
commit e4af376d(drivers: hv: switch to use mb() instead of smp_mb()), the adjustment mistakenly dropped the change in hv_ringbuffer_read, so add it. Signed-off-by:
Qiang Huang <h.huangqiang@huawei.com> Signed-off-by:
-
Andy Grover authored
commit 2c42be2d upstream. ft_del_tpg checks tpg->tport is set before unlinking the tpg from the tport when the tpg is being removed. Set this pointer in ft_tport_create, or the unlinking won't happen in ft_del_tpg and tport->tpg will reference a deleted object. This patch sets tpg->tport in ft_tport_create, because that's what ft_del_tpg checks, and is the only way to get back to the tport to clear tport->tpg. The bug was occuring when: - lport created, tport (our per-lport, per-provider context) is allocated. tport->tpg = NULL - tpg created - a PRLI is received. ft_tport_create is called, tpg is found and tport->tpg is set - tpg removed. ft_tpg is freed in ft_del_tpg. Since tpg->tport was not set, tport->tpg is not cleared and points at freed memory - Future calls to ft_tport_create return tport via first conditional, instead of searching for new tpg by calling ft_lport_find_tpg. tport->tpg is still invalid, and will access freed memory. see https://bugzilla.redhat.com/show_bug.cgi?id=1071340Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
H. Peter Anvin authored
commit b3b42ac2 upstream. The IRET instruction, when returning to a 16-bit segment, only restores the bottom 16 bits of the user space stack pointer. We have a software workaround for that ("espfix") for the 32-bit kernel, but it relies on a nonzero stack segment base which is not available in 32-bit mode. Since 16-bit support is somewhat crippled anyway on a 64-bit kernel (no V86 mode), and most (if not quite all) 64-bit processors support virtualization for the users who really need it, simply reject attempts at creating a 16-bit segment when running on top of a 64-bit kernel. Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/n/tip-kicdm89kzw9lldryb1br9od0@git.kernel.orgSigned-off-by:
-
Rafał Miłecki authored
commit 12cd43c6 upstream. Register B43_MMIO_PSM_PHY_HDR is 16 bit one, so accessing it with 32b functions isn't safe. On my machine it causes delayed (!) CPU exception: Disabling lock debugging due to kernel taint mce: [Hardware Error]: CPU 0: Machine Check Exception: 4 Bank 4: b200000000070f0f mce: [Hardware Error]: TSC 164083803dc mce: [Hardware Error]: PROCESSOR 2:20fc2 TIME 1396650505 SOCKET 0 APIC 0 microcode 0 mce: [Hardware Error]: Run the above through 'mcelog --ascii' mce: [Hardware Error]: Machine check: Processor context corrupt Kernel panic - not syncing: Fatal machine check on current CPU Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Jens Axboe authored
commit e39435ce upstream. I got a bug report yesterday from Laszlo Ersek in which he states that his kvm instance fails to suspend. Laszlo bisected it down to this commit 1cf7e9c6 ("virtio_blk: blk-mq support") where virtio-blk is converted to use the blk-mq infrastructure. After digging a bit, it became clear that the issue was with the queue drain. blk-mq tracks queue usage in a percpu counter, which is incremented on request alloc and decremented when the request is freed. The initial hunt was for an inconsistency in blk-mq, but everything seemed fine. In fact, the counter only returned crazy values when suspend was in progress. When a CPU is unplugged, the percpu counters merges that CPU state with the general state. blk-mq takes care to register a hotcpu notifier with the appropriate priority, so we know it runs after the percpu counter notifier. However, the percpu counter notifier only merges the state when the CPU is fully gone. This leaves a state transition where the CPU going away is no longer in the online mask, yet it still holds private values. This means that in this state, percpu_counter_sum() returns invalid results, and the suspend then hangs waiting for abs(dead-cpu-value) requests to complete which of course will never happen. Fix this by clearing the state earlier, so we never have a case where the CPU isn't in online mask but still holds private state. This bug has been there since forever, I guess we don't have a lot of users where percpu counters needs to be reliable during the suspend cycle. Signed-off-by:
Jens Axboe <axboe@fb.com> Reported-by:
Laszlo Ersek <lersek@redhat.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
commit 4f8e9400 upstream. PCM pointer callbacks in ice1712 driver check the buffer size boundary wrongly between bytes and frames. This leads to PCM core warnings like: snd_pcm_update_hw_ptr0: 105 callbacks suppressed ALSA pcm_lib.c:352 BUG: pcmC3D0c:0, pos = 5461, buffer size = 5461, period size = 2730 This patch fixes these checks to be placed after the proper unit conversions. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Oleg Nesterov authored
commit dfccbb5e upstream. wait_task_zombie() first does EXIT_ZOMBIE->EXIT_DEAD transition and drops tasklist_lock. If this task is not the natural child and it is traced, we change its state back to EXIT_ZOMBIE for ->real_parent. The last transition is racy, this is even documented in 50b8d257 "ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race". wait_consider_task() tries to detect this transition and clear ->notask_error but we can't rely on ptrace_reparented(), debugger can exit and do ptrace_unlink() before its sub-thread sets EXIT_ZOMBIE. And there is another problem which were missed before: this transition can also race with reparent_leader() which doesn't reset >exit_signal if EXIT_DEAD, assuming that this task must be reaped by someone else. So the tracee can be re-parented with ->exit_signal != SIGCHLD, and if /sbin/init doesn't use __WALL it becomes unreapable. Change reparent_leader() to update ->exit_signal even if EXIT_DEAD. Note: this is the simple temporary hack for -stable, it doesn't try to solve all problems, it will be reverted by the next changes. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Jan Kratochvil <jan.kratochvil@redhat.com> Reported-by:
Michal Schmidt <mschmidt@redhat.com> Tested-by:
-
Mizuma, Masayoshi authored
commit 55f67141 upstream. When I decrease the value of nr_hugepage in procfs a lot, softlockup happens. It is because there is no chance of context switch during this process. On the other hand, when I allocate a large number of hugepages, there is some chance of context switch. Hence softlockup doesn't happen during this process. So it's necessary to add the context switch in the freeing process as same as allocating process to avoid softlockup. When I freed 12 TB hugapages with kernel-2.6.32-358.el6, the freeing process occupied a CPU over 150 seconds and following softlockup message appeared twice or more. $ echo 6000000 > /proc/sys/vm/nr_hugepages $ cat /proc/sys/vm/nr_hugepages 6000000 $ grep ^Huge /proc/meminfo HugePages_Total: 6000000 HugePages_Free: 6000000 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB $ echo 0 > /proc/sys/vm/nr_hugepages BUG: soft lockup - CPU#16 stuck for 67s! [sh:12883] ... Pid: 12883, comm: sh Not tainted 2.6.32-358.el6.x86_64 #1 Call Trace: free_pool_huge_page+0xb8/0xd0 set_max_huge_pages+0x128/0x190 hugetlb_sysctl_handler_common+0x113/0x140 hugetlb_sysctl_handler+0x1e/0x20 proc_sys_call_handler+0x97/0xd0 proc_sys_write+0x14/0x20 vfs_write+0xb8/0x1a0 sys_write+0x51/0x90 __audit_syscall_exit+0x265/0x290 system_call_fastpath+0x16/0x1b I have not confirmed this problem with upstream kernels because I am not able to prepare the machine equipped with 12TB memory now. However I confirmed that the amount of decreasing hugepages was directly proportional to the amount of required time. I measured required times on a smaller machine. It showed 130-145 hugepages decreased in a millisecond. Amount of decreasing Required time Decreasing rate hugepages (msec) (pages/msec) ------------------------------------------------------------ 10,000 pages == 20GB 70 - 74 135-142 30,000 pages == 60GB 208 - 229 131-144 It means decrement of 6TB hugepages will trigger softlockup with the default threshold 20sec, in this decreasing rate. Signed-off-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Vlastimil Babka authored
commit 57e68e9c upstream. A BUG_ON(!PageLocked) was triggered in mlock_vma_page() by Sasha Levin fuzzing with trinity. The call site try_to_unmap_cluster() does not lock the pages other than its check_page parameter (which is already locked). The BUG_ON in mlock_vma_page() is not documented and its purpose is somewhat unclear, but apparently it serializes against page migration, which could otherwise fail to transfer the PG_mlocked flag. This would not be fatal, as the page would be eventually encountered again, but NR_MLOCK accounting would become distorted nevertheless. This patch adds a comment to the BUG_ON in mlock_vma_page() and munlock_vma_page() to that effect. The call site try_to_unmap_cluster() is fixed so that for page != check_page, trylock_page() is attempted (to avoid possible deadlocks as we already have check_page locked) and mlock_vma_page() is performed only upon success. If the page lock cannot be obtained, the page is left without PG_mlocked, which is again not a problem in the whole unevictable memory design. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Bob Liu <bob.liu@oracle.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Michel Lespinasse <walken@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Nicholas Bellinger authored
commit d444edc6 upstream. This patch fixes a long-standing bug in iscsit_build_conn_drop_async_message() where during ERL=2 connection recovery, a bogus conn_p pointer could end up being used to send the ISCSI_OP_ASYNC_EVENT + DROPPING_CONNECTION notifying the initiator that cmd->logout_cid has failed. The bug was manifesting itself as an OOPs in iscsit_allocate_cmd() with a bogus conn_p pointer in iscsit_build_conn_drop_async_message(). Reported-by:
Arshad Hussain <arshad.hussain@calsoftinc.com> Reported-by:
santosh kulkarni <santosh.kulkarni@calsoftinc.com> Signed-off-by:
-
alex chen authored
commit f7cf4f5b upstream. Do not put bh when buffer_uptodate failed in ocfs2_write_block and ocfs2_write_super_or_backup, because it will put bh in b_end_io. Otherwise it will hit a warning "VFS: brelse: Trying to free free buffer". Signed-off-by:
Alex Chen <alex.chen@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by:
Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Junxiao Bi authored
commit ded2cf71 upstream. There is a race window in dlm_do_recovery() between dlm_remaster_locks() and dlm_reset_recovery() when the recovery master nearly finish the recovery process for a dead node. After the master sends FINALIZE_RECO message in dlm_remaster_locks(), another node may become the recovery master for another dead node, and then send the BEGIN_RECO message to all the nodes included the old master, in the handler of this message dlm_begin_reco_handler() of old master, dlm->reco.dead_node and dlm->reco.new_master will be set to the second dead node and the new master, then in dlm_reset_recovery(), these two variables will be reset to default value. This will cause new recovery master can not finish the recovery process and hung, at last the whole cluster will hung for recovery. old recovery master: new recovery master: dlm_remaster_locks() become recovery master for another dead node. dlm_send_begin_reco_message() dlm_begin_reco_handler() { if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) { return -EAGAIN; } dlm_set_reco_master(dlm, br->node_idx); dlm_set_reco_dead_node(dlm, br->dead_node); } dlm_reset_recovery() { dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM); dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM); } will hang in dlm_remaster_locks() for request dlm locks info Before send FINALIZE_RECO message, recovery master should set DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done, this can break the race windows as the BEGIN_RECO messages will not be handled before DLM_RECO_STATE_FINALIZE flag is cleared. A similar race may happen between new recovery master and normal node which is in dlm_finalize_reco_handler(), also fix it. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Wengang Wang <wen.gang.wang@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Junxiao Bi authored
commit 34aa8dac upstream. This issue was introduced by commit 800deef3 ("ocfs2: use list_for_each_entry where benefical") in 2007 where it replaced list_for_each with list_for_each_entry. The variable "lock" will point to invalid data if "tmpq" list is empty and a panic will be triggered due to this. Sunil advised reverting it back, but the old version was also not right. At the end of the outer for loop, that list_for_each_entry will also set "lock" to an invalid data, then in the next loop, if the "tmpq" list is empty, "lock" will be an stale invalid data and cause the panic. So reverting the list_for_each back and reset "lock" to NULL to fix this issue. Another concern is that this seemes can not happen because the "tmpq" list should not be empty. Let me describe how. old lock resource owner(node 1): migratation target(node 2): image there's lockres with a EX lock from node 2 in granted list, a NR lock from node x with convert_type EX in converting list. dlm_empty_lockres() { dlm_pick_migration_target() { pick node 2 as target as its lock is the first one in granted list. } dlm_migrate_lockres() { dlm_mark_lockres_migrating() { res->state |= DLM_LOCK_RES_BLOCK_DIRTY; wait_event(dlm->ast_wq, !dlm_lockres_is_dirty(dlm, res)); //after the above code, we can not dirty lockres any more, // so dlm_thread shuffle list will not run downconvert lock from EX to NR upconvert lock from NR to EX <<< migration may schedule out here, then <<< node 2 send down convert request to convert type from EX to <<< NR, then send up convert request to convert type from NR to <<< EX, at this time, lockres granted list is empty, and two locks <<< in the converting list, node x up convert lock followed by <<< node 2 up convert lock. // will set lockres RES_MIGRATING flag, the following // lock/unlock can not run dlm_lockres_release_ast(dlm, res); } dlm_send_one_lockres() dlm_process_recovery_data() for (i=0; i<mres->num_locks; i++) if (ml->node == dlm->node_num) for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) { list_for_each_entry(lock, tmpq, list) if (lock) break; <<< lock is invalid as grant list is empty. } if (lock->ml.node != ml->node) BUG() >>> crash here } I see the above locks status from a vmcore of our internal bug. Signed-off-by:
-
Matt Fleming authored
commit a0c32761 upstream. Kees reported the following error: arch/sh/kernel/dumpstack.c: In function 'print_trace_address': arch/sh/kernel/dumpstack.c:118:2: error: format not a string literal and no format arguments [-Werror=format-security] Use the "%s" format so that it's impossible to interpret 'data' as a format string. Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Reported-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
Alex Deucher authored
commit 16086279 upstream. This needs to be done to update some of the fields in the connector structure used by the audio code. Noticed by several users on irc. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Christopher Friedt authored
commit aa6de142 upstream. Previously, the vmwgfx_fb driver would allow users to call FBIOSET_VINFO, but it would not adjust the FINFO properly, resulting in distorted screen rendering. The patch corrects that behaviour. See https://bugs.gentoo.org/show_bug.cgi?id=494794 for examples. Signed-off-by:
Christopher Friedt <chrisfriedt@gmail.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Jeff Mahoney authored
commit 01d88857 upstream. jdm-20004 reiserfs_delete_xattrs: Couldn't delete all xattrs (-2) The -ENOENT is due to readdir calling dir_emit on the same entry twice. If the dir_emit callback sleeps and the tree is changed underneath us, we won't be able to trust deh_offset(deh) anymore. We need to save next_pos before we might sleep so we can find the next entry. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Yann Droneaud authored
commit 5bdb0f02 upstream. In case of error when writing to userspace, function ehca_create_cq() does not set an error code before following its error path. This patch sets the error code to -EFAULT when ib_copy_to_udata() fails. This was caught when using spatch (aka. coccinelle) to rewrite call to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.comSigned-off-by:
Yann Droneaud <ydroneaud@opteya.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Yann Droneaud authored
commit 08e74c4b upstream. In case of error when writing to userspace, the function mthca_create_cq() does not set an error code before following its error path. This patch sets the error code to -EFAULT when ib_copy_to_udata() fails. This was caught when using spatch (aka. coccinelle) to rewrite call to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.comSigned-off-by:
-
W. Trevor King authored
commit a4b7f21d upstream. The `lspci -nnvv` output contains (wrapped for line length): 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:115d] Signed-off-by:
W. Trevor King <wking@tremily.us> Signed-off-by:
-
Huacai Chen authored
commit c14af233 upstream. The original MIPS hibernate code flushes cache and TLB entries in swsusp_arch_resume(). But they are removed in Commit 44eeab67 (MIPS: Hibernation: Remove SMP TLB and cacheflushing code.). A cross- CPU flush is surely unnecessary because all but the local CPU have already been disabled. But a local flush (at least the TLB flush) is needed. When we do hibernation on Loongson-3 with an E1000E NIC, it is very easy to produce a kernel panic (kernel page fault, or unaligned access). The root cause is E1000E driver use vzalloc_node() to allocate pages, the stale TLB entries of the booting kernel will be misused by the resumed target kernel. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6643/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
J. Bruce Fields authored
commit 480efaee upstream. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit fe76cd88 upstream. If unable to ensure_next_mapping() we must add the current bio, which was removed from the @bios list via bio_list_pop, back to the deferred_bios list before all the remaining @bios. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Acked-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Jani Nikula authored
commit e1f23f3d upstream. This is *not* bisected, but the likely regression is commit c3561438 Author: Zhao Yakui <yakui.zhao@intel.com> Date: Tue Nov 24 09:48:48 2009 +0800 drm/i915: Don't set up the TV port if it isn't in the BIOS table. The commit does not check for all TV device types that might be present in the VBT, disabling TV out for the missing ones. Add composite S-video. Reported-and-tested-by:
Matthew Khouzam <matthew.khouzam@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73362Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: s/old\.device_type/device_type/] Signed-off-by:
-
J. Bruce Fields authored
commit 9f67f189 upstream. Looks like this bug has been here since these write counts were introduced, not sure why it was just noticed now. Thanks also to Jan Kara for pointing out the problem. Reported-by:
Matthew Rahtz <mrahtz@rapitasystems.com> Signed-off-by:
-
Ben Hutchings authored
Part of commit bad0dcff ('new helpers: fh_{want,drop}_write()') upstream. Signed-off-by:
-
J. Bruce Fields authored
commit 4c69d585 upstream. Signed-off-by:
-
J. Bruce Fields authored
commit de3997a7 upstream. This was an omission from 8c18f205 "nfsd41: SUPPATTR_EXCLCREAT attribute". Cc: Benny Halevy <bhalevy@primarydata.com> Signed-off-by:
-
Jason Wang authored
commit ca3ba2a2 upstream. This patch bypass the timer_irq_works() check for hyperv guest since: - It was guaranteed to work. - timer_irq_works() may fail sometime due to the lpj calibration were inaccurate in a hyperv guest or a buggy host. In the future, we should get the tsc frequency from hypervisor and use preset lpj instead. [ hpa: I would prefer to not defer things to "the future" in the future... ] Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Acked-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Link: http://lkml.kernel.org/r/1393558229-14755-1-git-send-email-jasowang@redhat.comSigned-off-by:
-
