- 01 Feb, 2019 7 commits
-
-
Chao Fan authored
Parse SRAT for the immovable memory regions and use that information to control which offset KASLR selects so that it doesn't overlap with any movable region. [ bp: - Move struct mem_vector where it is visible so that it builds. - Correct comments. - Rewrite commit message. ] Signed-off-by:
Chao Fan <fanc.fnst@cn.fujitsu.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Baoquan He <bhe@redhat.com> Cc: <caoj.fnst@cn.fujitsu.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <indou.takao@jp.fujitsu.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: <kasong@redhat.com> Cc: <keescook@chromium.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <msys.mizuma@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190123110850.12433-7-fanc.fnst@cn.fujitsu.com
-
Chao Fan authored
The RSDP is needed by KASLR so parse it early and save it in boot_params.acpi_rsdp_addr, before KASLR setup runs. RSDP is needed by other kernel facilities so have the parsing code built-in instead of a long "depends on" line in Kconfig. [ bp: - Trim commit message and comments - Add CONFIG_ACPI dependency in the Makefile - Move ->acpi_rsdp_addr assignment with the rest of boot_params massaging in extract_kernel(). ] Signed-off-by: -
Chao Fan authored
Scan memory (EBDA) for the RSDP and verify RSDP by signature and checksum. [ bp: - Trim commit message. - Simplify bios_get_rsdp_addr() and cleanup mad casting. ] Signed-off-by:
-
Chao Fan authored
The immovable memory ranges information in the SRAT table is necessary to fix the issue of KASLR not paying attention to movable memory regions when selecting the offset. Therefore, SRAT needs to be parsed. Depending on the boot: KEXEC/EFI/BIOS, the methods to compute RSDP are different. When booting from EFI, the EFI table points to the RSDP. So iterate over the EFI system tables in order to find the RSDP. [ bp: - Heavily massage commit message - Trim comments - Move the CONFIG_ACPI ifdeffery into the Makefile. ] Signed-off-by:
-
Chao Fan authored
KASLR may randomly choose offsets which are located in movable memory regions resulting in the movable memory becoming immovable. The ACPI SRAT (System/Static Resource Affinity Table) describes memory ranges including ranges of memory provided by hot-added memory devices. In order to access SRAT, one needs the Root System Description Pointer (RSDP) with which to find the Root/Extended System Description Table (R/XSDT) which then contains the system description tables of which SRAT is one of. In case the RSDP address has been passed on the command line (kexec-ing a second kernel) parse it from there. [ bp: Rewrite the commit message and cleanup the code. ] Signed-off-by:
-
Chao Fan authored
Copy kstrtoull() and the other necessary functions from lib/kstrtox.c to boot/string.c so that code in boot/ can use kstrtoull() and the old simple_strtoull() can gradually be phased out. Using div_u64() from math64.h directly will cause the dividend to be handled as a 64-bit value and cause the infamous __divdi3 linker error due to gcc trying to use its library function for the 64-bit division. Therefore, separate the dividend into an upper and lower part. [ bp: Rewrite commit message. ] Signed-off-by:
-
Borislav Petkov authored
Just drop the three-item ifdeffery and build it in unconditionally. Early cmdline parsing is needed more often than not. Signed-off-by:
-
- 30 Jan, 2019 6 commits
-
-
Waiman Long authored
The current dentry number tracking code doesn't distinguish between positive & negative dentries. It just reports the total number of dentries in the LRU lists. As excessive number of negative dentries can have an impact on system performance, it will be wise to track the number of positive and negative dentries separately. This patch adds tracking for the total number of negative dentries in the system LRU lists and reports it in the 5th field in the /proc/sys/fs/dentry-state file. The number, however, does not include negative dentries that are in flight but not in the LRU yet as well as those in the shrinker lists which are on the way out anyway. The number of positive dentries in the LRU lists can be roughly found by subtracting the number of negative dentries from the unused count. Matthew Wilcox had confirmed that since the introduction of the dentry_stat structure in 2.1.60, the dummy array was there, probably for future extension. They were not replacements of pre-existing fields. So no sane applications that read the value of /proc/sys/fs/dentry-state will do dummy thing if the last 2 fields of the sysctl parameter are not zero. IOW, it will be safe to use one of the dummy array entry for negative dentry count. Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Waiman Long authored
The list_lru structure is essentially just a pointer to a table of per-node LRU lists. Even if CONFIG_MEMCG_KMEM is defined, the list field is just used for LRU list registration and shrinker_id is set at initialization. Those fields won't need to be touched that often. So there is no point to make the list_lru structures to sit in their own cachelines. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
-
Waiman Long authored
The nr_dentry_unused per-cpu counter tracks dentries in both the LRU lists and the shrink lists where the DCACHE_LRU_LIST bit is set. The shrink_dcache_sb() function moves dentries from the LRU list to a shrink list and subtracts the dentry count from nr_dentry_unused. This is incorrect as the nr_dentry_unused count will also be decremented in shrink_dentry_list() via d_shrink_del(). To fix this double decrement, the decrement in the shrink_dcache_sb() function is taken out. Fixes: 4e717f5c ("list_lru: remove special case function list_lru_dispose_all." Cc: stable@kernel.org Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fixes from Joerg Roedel: "A few more fixes this time: - Two patches to fix the error path of the map_sg implementation of the AMD IOMMU driver. - Also a missing IOTLB flush is fixed in the AMD IOMMU driver. - Memory leak fix for the Intel IOMMU driver. - Fix a regression in the Mediatek IOMMU driver which caused device initialization to fail (seen as broken HDMI output)" * tag 'iommu-fixes-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix IOMMU page flush when detach device from a domain iommu/mediatek: Use correct fwspec in mtk_iommu_add_device() iommu/vt-d: Fix memory leak in intel_iommu_put_resv_regions() iommu/amd: Unmap all mapped pages in error path of map_sg iommu/amd: Call free_iova_fast with pfn in map_sg -
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Here is a bunch of GPIO fixes for the v5.0 series. I was helped out by Bartosz in collecting these fixes, for which I am very grateful, the biggest achievement in GPIO right now is work distribution. There is one serious core fix (timestamping) and a bunch of driver fixes: - Fix timestamps on nested IRQs - Handle IRQs properly in multiple instances of PCF857x - Use the right data register and IRQ type setting in the Spreadtrum GPIO driver - Let the value argument work properly when setting direction in the Altera GPIO driver - Mask interrupts properly in the vf610 driver" * tag 'gpio-v5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: vf610: Mask all GPIO interrupts gpio: altera-a10sr: Set proper output level for direction_output gpio: sprd: Fix incorrect irq type setting for the async EIC gpio: sprd: Fix the incorrect data register gpiolib: fix line event timestamps for nested irqs gpio: pcf857x: Fix interrupts on multiple instances -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Need to save away the IV across tls async operations, from Dave Watson. 2) Upon successful packet processing, we should liberate the SKB with dev_consume_skb{_irq}(). From Yang Wei. 3) Only apply RX hang workaround on effected macb chips, from Harini Katakam. 4) Dummy netdev need a proper namespace assigned to them, from Josh Elsasser. 5) Some paths of nft_compat run lockless now, and thus we need to use a proper refcnt_t. From Florian Westphal. 6) Avoid deadlock in mlx5 by doing IRQ locking, from Moni Shoua. 7) netrom does not refcount sockets properly wrt. timers, fix that by using the sock timer API. From Cong Wang. 8) Fix locking of inexact inserts of xfrm policies, from Florian Westphal. 9) Missing xfrm hash generation bump, also from Florian. 10) Missing of_node_put() in hns driver, from Yonglong Liu. 11) Fix DN_IFREQ_SIZE, from Johannes Berg. 12) ip6mr notifier is invoked during traversal of wrong table, from Nir Dotan. 13) TX promisc settings not performed correctly in qed, from Manish Chopra. 14) Fix OOB access in vhost, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) MAINTAINERS: Add entry for XDP (eXpress Data Path) net: set default network namespace in init_dummy_netdev() net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles net: caif: call dev_consume_skb_any when skb xmit done net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: macb: Apply RXUBR workaround only to versions with errata net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irq net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irq net: tls: Fix deadlock in free_resources tx net: tls: Save iv in tls_rec for async crypto requests vhost: fix OOB in get_rx_bufs() qed: Fix stack out of bounds bug qed: Fix system crash in ll2 xmit qed: Fix VF probe failure while FLR qed: Fix LACP pdu drops for VFs qed: Fix bug in tx promiscuous mode settings net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles netfilter: ipt_CLUSTERIP: fix warning unused variable cn ...
-
- 29 Jan, 2019 13 commits
-
-
Jesper Dangaard Brouer authored
Add multiple people as maintainers for XDP, sorted alphabetically. XDP is also tied to driver level support and code, but we cannot add all drivers to the list. Instead K: and N: match on 'xdp' in hope to catch some of those changes in drivers. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Josh Elsasser authored
Assign a default net namespace to netdevs created by init_dummy_netdev(). Fixes a NULL pointer dereference caused by busy-polling a socket bound to an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat if napi_poll() received packets: BUG: unable to handle kernel NULL pointer dereference at 0000000000000190 IP: napi_busy_loop+0xd6/0x200 Call Trace: sock_poll+0x5e/0x80 do_sys_poll+0x324/0x5a0 SyS_poll+0x6c/0xf0 do_syscall_64+0x6b/0x1f0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 7db6b048 ("net: Commonize busy polling code to focus on napi_id instead of socket") Signed-off-by:Josh Elsasser <jelsasser@appneta.com> Signed-off-by:
-
Yang Wei authored
The skb should be freed by dev_consume_skb_any() in b44_start_xmit() when bounce_skb is used. The skb is be replaced by bounce_skb, so the original skb should be consumed(not drop). dev_consume_skb_irq() should be called in b44_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by:
Yang Wei <yang.wei9@zte.com.cn> Signed-off-by:
-
Yang Wei authored
The skb shouled be consumed when xmit done, it makes drop profiles (dropwatch, perf) more friendly. dev_kfree_skb_irq()/kfree_skb() shouled be replaced by dev_consume_skb_any(), it makes code cleaner. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in cp_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by:
-
Harini Katakam authored
The interrupt handler contains a workaround for RX hang applicable to Zynq and AT91RM9200 only. Subsequent versions do not need this workaround. This workaround unnecessarily resets RX whenever RX used bit read is observed, which can be often under heavy traffic. There is no other action performed on RX UBR interrupt. Hence introduce a CAPS mask; enable this interrupt and workaround only on affected versions. Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in cpmac_end_xmit() when xmit done. It makes drop profiles more friendly. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in bmac_txdma_intr() when xmit done. It makes drop profiles more friendly. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in amd8111e_tx() when xmit done. It makes drop profiles more friendly. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in ace_tx_int() when xmit done. It makes drop profiles more friendly. Signed-off-by:
-
Dave Watson authored
If there are outstanding async tx requests (when crypto returns EINPROGRESS), there is a potential deadlock: the tx work acquires the lock, while we cancel_delayed_work_sync() while holding the lock. Drop the lock while waiting for the work to complete. Fixes: a42055e8 ("Add support for async encryption of records...") Signed-off-by:
Dave Watson <davejwatson@fb.com> Signed-off-by:
-
Dave Watson authored
aead_request_set_crypt takes an iv pointer, and we change the iv soon after setting it. Some async crypto algorithms don't save the iv, so we need to save it in the tls_rec for async requests. Found by hardcoding x64 aesni to use async crypto manager (to test the async codepath), however I don't think this combination can happen in the wild. Presumably other hardware offloads will need this fix, but there have been no user reports. Fixes: a42055e8 ("Add support for async encryption of records...") Signed-off-by:
-
Jason Wang authored
After batched used ring updating was introduced in commit e2b3b35e ("vhost_net: batch used ring update in rx"). We tend to batch heads in vq->heads for more than one packet. But the quota passed to get_rx_bufs() was not correctly limited, which can result a OOB write in vq->heads. headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx, vhost_len, &in, vq_log, &log, likely(mergeable) ? UIO_MAXIOV : 1); UIO_MAXIOV was still used which is wrong since we could have batched used in vq->heads, this will cause OOB if the next buffer needs more than 960 (1024 (UIO_MAXIOV) - 64 (VHOST_NET_BATCH)) heads after we've batched 64 (VHOST_NET_BATCH) heads: Acked-by:
Stefan Hajnoczi <stefanha@redhat.com> ============================================================================= BUG kmalloc-8k (Tainted: G B ): Redzone overwritten ----------------------------------------------------------------------------- INFO: 0x00000000fd93b7a2-0x00000000f0713384. First byte 0xa9 instead of 0xcc INFO: Allocated in alloc_pd+0x22/0x60 age=3933677 cpu=2 pid=2674 kmem_cache_alloc_trace+0xbb/0x140 alloc_pd+0x22/0x60 gen8_ppgtt_create+0x11d/0x5f0 i915_ppgtt_create+0x16/0x80 i915_gem_create_context+0x248/0x390 i915_gem_context_create_ioctl+0x4b/0xe0 drm_ioctl_kernel+0xa5/0xf0 drm_ioctl+0x2ed/0x3a0 do_vfs_ioctl+0x9f/0x620 ksys_ioctl+0x6b/0x80 __x64_sys_ioctl+0x11/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 INFO: Slab 0x00000000d13e87af objects=3 used=3 fp=0x (null) flags=0x200000000010201 INFO: Object 0x0000000003278802 @offset=17064 fp=0x00000000e2e6652b Fixing this by allocating UIO_MAXIOV + VHOST_NET_BATCH iovs for vhost-net. This is done through set the limitation through vhost_dev_init(), then set_owner can allocate the number of iov in a per device manner. This fixes CVE-2018-16880. Fixes: e2b3b35e ("vhost_net: batch used ring update in rx") Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
- 28 Jan, 2019 14 commits
-
-
David S. Miller authored
Manish Chopra says: ==================== qed: Bug fixes This series have SR-IOV and some general fixes. Please consider applying it to "net" ==================== Signed-off-by: -
Manish Chopra authored
KASAN reported following bug in qed_init_qm_get_idx_from_flags due to inappropriate casting of "pq_flags". Fix the type of "pq_flags". [ 196.624707] BUG: KASAN: stack-out-of-bounds in qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed] [ 196.624712] Read of size 8 at addr ffff809b00bc7360 by task kworker/0:9/1712 [ 196.624714] [ 196.624720] CPU: 0 PID: 1712 Comm: kworker/0:9 Not tainted 4.18.0-60.el8.aarch64+debug #1 [ 196.624723] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL024 09/26/2018 [ 196.624733] Workqueue: events work_for_cpu_fn [ 196.624738] Call trace: [ 196.624742] dump_backtrace+0x0/0x2f8 [ 196.624745] show_stack+0x24/0x30 [ 196.624749] dump_stack+0xe0/0x11c [ 196.624755] print_address_description+0x68/0x260 [ 196.624759] kasan_report+0x178/0x340 [ 196.624762] __asan_report_load_n_noabort+0x38/0x48 [ 196.624786] qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed] [ 196.624808] qed_init_qm_info+0xec0/0x2200 [qed] [ 196.624830] qed_resc_alloc+0x284/0x7e8 [qed] [ 196.624853] qed_slowpath_start+0x6cc/0x1ae8 [qed] [ 196.624864] __qede_probe.isra.10+0x1cc/0x12c0 [qede] [ 196.624874] qede_probe+0x78/0xf0 [qede] [ 196.624879] local_pci_probe+0xc4/0x180 [ 196.624882] work_for_cpu_fn+0x54/0x98 [ 196.624885] process_one_work+0x758/0x1900 [ 196.624888] worker_thread+0x4e0/0xd18 [ 196.624892] kthread+0x2c8/0x350 [ 196.624897] ret_from_fork+0x10/0x18 [ 196.624899] [ 196.624902] Allocated by task 2: [ 196.624906] kasan_kmalloc.part.1+0x40/0x108 [ 196.624909] kasan_kmalloc+0xb4/0xc8 [ 196.624913] kasan_slab_alloc+0x14/0x20 [ 196.624916] kmem_cache_alloc_node+0x1dc/0x480 [ 196.624921] copy_process.isra.1.part.2+0x1d8/0x4a98 [ 196.624924] _do_fork+0x150/0xfa0 [ 196.624926] kernel_thread+0x48/0x58 [ 196.624930] kthreadd+0x3a4/0x5a0 [ 196.624932] ret_from_fork+0x10/0x18 [ 196.624934] [ 196.624937] Freed by task 0: [ 196.624938] (stack is not available) [ 196.624940] [ 196.624943] The buggy address belongs to the object at ffff809b00bc0000 [ 196.624943] which belongs to the cache thread_stack of size 32768 [ 196.624946] The buggy address is located 29536 bytes inside of [ 196.624946] 32768-byte region [ffff809b00bc0000, ffff809b00bc8000) [ 196.624948] The buggy address belongs to the page: [ 196.624952] page:ffff7fe026c02e00 count:1 mapcount:0 mapping:ffff809b4001c000 index:0x0 compound_mapcount: 0 [ 196.624960] flags: 0xfffff8000008100(slab|head) [ 196.624967] raw: 0fffff8000008100 dead000000000100 dead000000000200 ffff809b4001c000 [ 196.624970] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 196.624973] page dumped because: kasan: bad access detected [ 196.624974] [ 196.624976] Memory state around the buggy address: [ 196.624980] ffff809b00bc7200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624983] ffff809b00bc7280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624985] >ffff809b00bc7300: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 [ 196.624988] ^ [ 196.624990] ffff809b00bc7380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624993] ffff809b00bc7400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624995] ================================================================== Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Manish Chopra authored
Cache number of fragments in the skb locally as in case of linear skb (with zero fragments), tx completion (or freeing of skb) may happen before driver tries to get number of frgaments from the skb which could lead to stale access to an already freed skb. Signed-off-by:
-
Manish Chopra authored
VFs may hit VF-PF channel timeout while probing, as in some cases it was observed that VF FLR and VF "acquire" message transaction (i.e first message from VF to PF in VF's probe flow) could occur simultaneously which could lead VF to fail sending "acquire" message to PF as VF is marked disabled from HW perspective due to FLR, which will result into channel timeout and VF probe failure. In such cases, try retrying VF "acquire" message so that in later attempts it could be successful to pass message to PF after the VF FLR is completed and can be probed successfully. Signed-off-by:
-
Manish Chopra authored
VF is always configured to drop control frames (with reserved mac addresses) but to work LACP on the VFs, it would require LACP control frames to be forwarded or transmitted successfully. This patch fixes this in such a way that trusted VFs (marked through ndo_set_vf_trust) would be allowed to pass the control frames such as LACP pdus. Signed-off-by:
-
Manish Chopra authored
When running tx switched traffic between VNICs created via a bridge(to which VFs are added), adapter drops the unicast packets in tx flow due to VNIC's ucast mac being unknown to it. But VF interfaces being in promiscuous mode should have caused adapter to accept all the unknown ucast packets. Later, it was found that driver doesn't really configure tx promiscuous mode settings to accept all unknown unicast macs. This patch fixes tx promiscuous mode settings to accept all unknown/unmatched unicast macs and works out the scenario. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in i596_interrupt() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by:
Yang Wei <albin_yang@163.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree: 1) The nftnl mutex is now per-netns, therefore use reference counter for matches and targets to deal with concurrent updates from netns. Moreover, place extensions in a pernet list. Patches from Florian Westphal. 2) Bail out with EINVAL in case of negative timeouts via setsockopt() through ip_vs_set_timeout(), from ZhangXiaoxu. 3) Spurious EINVAL on ebtables 32bit binary with 64bit kernel, also from Florian. 4) Reset TCP option header parser in case of fingerprint mismatch, otherwise follow up overlapping fingerprint definitions including TCP options do not work, from Fernando Fernandez Mancera. 5) Compilation warning in ipt_CLUSTER with CONFIG_PROC_FS unset. From Anders Roxell. ==================== Signed-off-by: -
Michal Hocko authored
This reverts commit 2830bf6f. The underlying assumption that one sparse section belongs into a single numa node doesn't hold really. Robert Shteynfeld has reported a boot failure. The boot log was not captured but his memory layout is as follows: Early memory node ranges node 1: [mem 0x0000000000001000-0x0000000000090fff] node 1: [mem 0x0000000000100000-0x00000000dbdf8fff] node 1: [mem 0x0000000100000000-0x0000001423ffffff] node 0: [mem 0x0000001424000000-0x0000002023ffffff] This means that node0 starts in the middle of a memory section which is also in node1. memmap_init_zone tries to initialize padding of a section even when it is outside of the given pfn range because there are code paths (e.g. memory hotplug) which assume that the full worth of memory section is always initialized. In this particular case, though, such a range is already intialized and most likely already managed by the page allocator. Scribbling over those pages corrupts the internal state and likely blows up when any of those pages gets used. Reported-by:
Robert Shteynfeld <robert.shteynfeld@gmail.com> Fixes: 2830bf6f ("mm, memory_hotplug: initialize struct pages for the full memory section") Cc: stable@kernel.org Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Andrew Lunn authored
On SoC reset all GPIO interrupts are disable. However, if kexec is used to boot into a new kernel, the SoC does not experience a reset. Hence GPIO interrupts can be left enabled from the previous kernel. It is then possible for the interrupt to fire before an interrupt handler is registered, resulting in the kernel complaining of an "unexpected IRQ trap", the interrupt is never cleared, and so fires again, resulting in an interrupt storm. Disable all GPIO interrupts before registering the GPIO IRQ chip. Fixes: 7f2691a1 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Anders Roxell authored
When CONFIG_PROC_FS isn't set the variable cn isn't used. net/ipv4/netfilter/ipt_CLUSTERIP.c: In function ‘clusterip_net_exit’: net/ipv4/netfilter/ipt_CLUSTERIP.c:849:24: warning: unused variable ‘cn’ [-Wunused-variable] struct clusterip_net *cn = clusterip_pernet(net); ^~ Rework so the variable 'cn' is declared inside "#ifdef CONFIG_PROC_FS". Fixes: b12f7bad ("netfilter: ipt_CLUSTERIP: remove wrong WARN_ON_ONCE in netns exit routine") Signed-off-by:Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Fernando Fernandez Mancera authored
When we check the tcp options of a packet and it doesn't match the current fingerprint, the tcp packet option pointer must be restored to its initial value in order to do the proper tcp options check for the next fingerprint. Here we can see an example. Assumming the following fingerprint base with two lines: S10:64:1:60:M*,S,T,N,W6: Linux:3.0::Linux 3.0 S20:64:1:60:M*,S,T,N,W7: Linux:4.19:arch:Linux 4.1 Where TCP options are the last field in the OS signature, all of them overlap except by the last one, ie. 'W6' versus 'W7'. In case a packet for Linux 4.19 kicks in, the osf finds no matching because the TCP options pointer is updated after checking for the TCP options in the first line. Therefore, reset pointer back to where it should be. Fixes: 11eeef41 ("netfilter: passive OS fingerprint xtables match") Signed-off-by:
Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by:
-
Florian Westphal authored
Unlike ip(6)tables ebtables only counts user-defined chains. The effect is that a 32bit ebtables binary on a 64bit kernel can do 'ebtables -N FOO' only after adding at least one rule, else the request fails with -EINVAL. This is a similar fix as done in 3f1e53ab ("netfilter: ebtables: don't attempt to allocate 0-sized compat array"). Fixes: 7d7d7e02 ("netfilter: compat: reject huge allocation requests") Reported-by:
Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Andrew Lunn authored
Duec to a typo, mv88e6390_serdes_irq_setup() calls itself, rather than mv88e6390x_serdes_irq_setup(). It then blows the stack, and shortly after the machine blows up. Fixes: 2defda1f ("net: dsa: mv88e6xxx: Add support for SERDES on ports 2-8 for 6390X") Signed-off-by:
-
