- 21 Jan, 2013 1 commit
-
-
Steffen Klassert authored
XFRM_REPLAY_SEQ, XFRM_REPLAY_OSEQ and XFRM_REPLAY_SEQ_MASK were introduced years ago but actually never used. Signed-off-by:Steffen Klassert <steffen.klassert@secunet.com>
-
- 17 Jan, 2013 1 commit
-
-
Cong Wang authored
afinfo->type_map and afinfo->mode_map deserve separated locks, they are different things. We should just take RCU read lock to protect afinfo itself, but not for the inner pointers. Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
- 16 Jan, 2013 2 commits
-
-
Cong Wang authored
Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Cong Wang authored
Similar to commit 418a99ac (Replace rwlock on xfrm_policy_afinfo with rcu), the rwlock on xfrm_state_afinfo can be replaced by RCU too. Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
- 08 Jan, 2013 3 commits
-
-
Jussi Kivilinna authored
rfc3686 in CTR module is now able of using asynchronous ctr(aes) from aesni-intel, so rfc3686(ctr(aes)) in aesni-intel is no longer needed. Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jussi Kivilinna authored
Some hardware crypto drivers register asynchronous ctr(aes), which is left unused in IPSEC because rfc3686 template only supports synchronous block ciphers. Some other drivers register rfc3686(ctr(aes)) to workaround this limitation but not all. This patch changes rfc3686 to use asynchronous block ciphers, to allow async ctr(aes) algorithms to be utilized automatically by IPSEC. Signed-off-by:
-
Jussi Kivilinna authored
IPSEC uses block ciphers asynchronous, but probes only for synchronous block ciphers and makes ealg entries only available if synchronous block cipher is found. So with setup, where hardware crypto driver registers asynchronous block ciphers and software crypto module is not build, ealg is not marked as being available. Use crypto_has_ablkcipher instead and remove ASYNC mask. Signed-off-by:
-
- 07 Jan, 2013 14 commits
-
-
Li RongQing authored
Remove the check if x->km.state equal to XFRM_STATE_VALID in xfrm_state_check_expire(), which will be done before call xfrm_state_check_expire(). add a LINUX_MIB_XFRMOUTSTATEINVALID statistic to record the outbound error due to invalid xfrm state. Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Paul Gortmaker authored
We threw away the microchannel support, but the removal wasn't completely trivial since there was namespace overlap with the machine check support, and hence some orphaned dependencies survived the deletion. This attempts to sweep those up and send them to the bit-bucket. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Flavio Leitner authored
The fields must be null-terminated. Signed-off-by:
Flavio Leitner <fbl@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Hannes Frederic Sowa authored
As per suggestion from Eric Dumazet this patch makes tcp_ecn sysctl namespace aware. The reason behind this patch is to ease the testing of ecn problems on the internet and allows applications to tune their own use of ecn. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Eric Dumazet authored
splice() can handle pages of any order, but network code tries hard to split them in PAGE_SIZE units. Not quite successfully anyway, as __splice_segment() assumed poff < PAGE_SIZE. This is true for the skb->data part, not necessarily for the fragments. This patch removes this logic to give the pages as they are in the skb. Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by:
-
Jiri Pirko authored
In case user passed address via netlink during create, NET_ADDR_PERM was set. That is not correct so fix this by setting NET_ADDR_SET. Signed-off-by:
-
Jiri Pirko authored
Function ethoc_set_mac_address() was incorrectly using passed pointer as pointer to address, that is not correct. Struct sockaddr have to be be used here. Signed-off-by:
-
Nithin Nayak Sujir authored
Commit de0a4148 added Kconfig logic to select HWMON and removed all the IS_ENABLED(CONFIG_HWMON) checks in the tg3.c file. It missed this one check in the header. Update version to 3.129 and update copyright year. Signed-off-by:
Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Michael Chan authored
Simplify the code to detect PCI function number on 5717, 5719, and 5720. If shared memory does not have proper signature, read the function number from register directly. Signed-off-by:
-
Michael Chan authored
Detect NVRAM types for 5762 and read OTP firmware version. Signed-off-by:
-
Michael Chan authored
Add basic support for 5762 which is a 57765_PLUS class device. Signed-off-by:
-
- 04 Jan, 2013 19 commits
-
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Currently, the size of skb allocated for NDISC is MAX_HEADER + LL_RESERVED_SPACE(dev) + packet length + dev->needed_tailroom, but only LL_RESERVED_SPACE(dev) bytes is "reserved" for headers. As a result, the skb looks like this (after construction of the message): head data tail end +--------------------------------------------------------------+ + | | | | +--------------------------------------------------------------+ |<-hlen---->|<---ipv6 packet------>|<--tlen-->|<--MAX_HEADER-->| =LL_ = dev RESERVED_ ->needed_ SPACE(dev) tailroom As the name implies, "MAX_HEADER" is used for headers, and should be "reserved" in prior to packet construction. Or, if some space is really required at the tail of ther skb, it should be explicitly documented. We have several option after construction of NDISC message: Option 1: head data tail end +---------------------------------------------+ + | | | +---------------------------------------------+ |<-hlen---->|<---ipv6 packet------>|<--tlen-->| =LL_ = dev RESERVED_ ->needed_ SPACE(dev) tailroom Option 2: head data tail end +--------------------------------------------------+ + | | | +--------------------------------------------------+ |<--MAX_HEADER-->|<---ipv6 packet------>|<--tlen-->| = dev ->needed_ tailroom Option 3: head data tail end +--------------------------------------------------------------+ + | | | | +--------------------------------------------------------------+ |<--MAX_HEADER-->|<-hlen---->|<---ipv6 packet------>|<--tlen-->| =LL_ = dev RESERVED_ ->needed_ SPACE(dev) tailroom Our tunnel drivers try expanding headroom and the space for tunnel encapsulation was not a mandatory space -- so we are not seeing bugs here --, but just for optimization for performance critial situations. Since NDISC messages are not performance critical unlike TCP, and as we know outgoing device, LL_RESERVED_SPACE(dev) should be just enough for the device in most (if not all) cases: LL_RESERVED_SPACE(dev) <= LL_MAX_HEADER <= MAX_HEADER Note that LL_RESERVED_SPACE(dev) is also enough for NDISC over SIT (e.g., ISATAP). So, I think Option 1 is just fine here. Signed-off-by: -
Frank Li authored
MX6 and mx28 support enhanced DMA descriptor buff to support 1588 ptp. But MX25, MX3x, MX5x can't support enhanced DMA descriptor buff. Check fec type and choose correct DMA descriptor buff type. Remove static config CONFIG_FEC_PTP. ptp function will be auto detected. Signed-off-by:
Frank Li <Frank.Li@freescale.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Peter Hüwe authored
Sparse complains that: drivers/net/ethernet/broadcom/tg3.c:5670:55: sparse: constant 0x7fffffffffffffff is so big it is long long (on x86/32 bit) so we suffix the constant with LL in the header file. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Steve Glendinning authored
This patch enables USB dynamic autosuspend for LAN9500A. This saves very little power in itself, but it allows power saving in upstream hubs/hosts. The earlier devices in this family (LAN9500/9512/9514) do not support this feature. Signed-off-by:
Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by:
-
Steve Glendinning authored
The register read/write functions already log a warning if an access fails, so this patch removes the additional warnings logged by callers that don't add any more information. This patch makes the resulting driver smaller by not containing as many warning strings. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== This is a V6 of a repost of my previous patchset: "[patch net-next v2 00/15] net: introduce upper device lists and remove dev->master" from Aug 14 The discussion around "[net-next] bonding: don't allow the master to become its slave" forced me to think about upper<->lower device connections. This patchset adds a possibility to record upper device linkage. All upper<->lower devices are converted to use this mechanism right after. That leads to dev->master removal because this info becomes redundant since "master links" have the same value. After all changes, there is no longer possible to do things as: "bond->someotherdevice->samebond" Also I think that drivers like cxgb3, qlcnic, qeth would benefit by this in future by being able to get more appropriate info about l3 addresses. v5->v6: - netdev_has_upper_dev() - added statement to comment that this is looking at the immediate upper devices only. - renamed "RTNL semaphore" -> "RTNL lock" in all comments - renamed __netdev_has_upper_dev() to __netdev_search_upper_dev() to emhasize the difference to netdev_has_upper_dev() v4->v5: - fixed missed typo in drivers/infiniband/hw/nes/nes_cm.c v3->v4: - comments in __netdev_upper_dev_link() squashed into one line - kfree_rcu used instead of call_rcu in netdev_upper_dev_unlink() v2->v3: - removed recursion in __netdev_has_upper_dev() - refreshed bits to be applicable on current net-next v1->v2: - s/unique/master/ better naming + stays closer to the past - fixed vlan err goto - original patch 15 (WARN_ON change) is squashed into the first patch ==================== Signed-off-by: -
Jiri Pirko authored
Nobody uses this now. Remove it. Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Benefit from new upper dev list and free bonding from dev->master usage. Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Also, since all users call __vlan_find_dev_deep() with rcu_read_lock, make no possibility to call this with rtnl mutex held only. Signed-off-by:
-
Jiri Pirko authored
Also benefit from rcu_read_lock held and use __in_dev_get_rcu() in ipv4 case. Signed-off-by:
-
Jiri Pirko authored
rcu_read_lock was missing here Signed-off-by:
Sony Chacko <sony.chacko@qlogic.com> Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
