- 31 May, 2020 9 commits
-
-
Eric Dumazet authored
syzbot recently found a way to crash the kernel [1] Issue here is that inet_hash() & inet_unhash() are currently only meant to be used by TCP & DCCP, since only these protocols provide the needed hashinfo pointer. L2TP uses a single list (instead of a hash table) This old bug became an issue after commit 61023658 ("bpf: Add new cgroup attach type to enable sock modifications") since after this commit, sk_common_release() can be called while the L2TP socket is still considered 'hashed'. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: sk_common_release+0xba/0x370 net/core/sock.c:3210 inet_create net/ipv4/af_inet.c:390 [inline] inet_create+0x966/0xe00 net/ipv4/af_inet.c:248 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x441e29 Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdce184148 EFLAGS: 00000246 ORIG_RAX: 0000000000000029 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441e29 RDX: 0000000000000073 RSI: 0000000000000002 RDI: 0000000000000002 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000402c30 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace 23b6578228ce553e ]--- RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 0d76751f ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Cc: Andrii Nakryiko <andriin@fb.com> Reported-by: syzbot+3610d489778b57cc8031@syzkaller.appspotmail.com
-
Chris Lew authored
A null pointer dereference in qrtr_ns_data_ready() is seen if a client opens a qrtr socket before qrtr_ns_init() can bind to the control port. When the control port is bound, the ENETRESET error will be broadcasted and clients will close their sockets. This results in DEL_CLIENT packets being sent to the ns and qrtr_ns_data_ready() being called without the workqueue being allocated. Allocate the workqueue before setting sk_data_ready and binding to the control port. This ensures that the work and workqueue structs are allocated and initialized before qrtr_ns_data_ready can be called. Fixes: 0c2204a4 ("net: qrtr: Migrate nameservice to kernel from userspace") Signed-off-by:
Chris Lew <clew@codeaurora.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Paolo Abeni says: ==================== mptcp: a bunch of fixes This patch series pulls together a few bugfixes for MPTCP bug observed while doing stress-test with apache bench - forced to use MPTCP and multiple subflows. ==================== Signed-off-by: -
Paolo Abeni authored
Currently we remote the msk from the token container only via mptcp_close(). The MPTCP master socket can be destroyed also via other paths (e.g. if not yet accepted, when shutting down the listener socket). When we hit the latter scenario, dangling msk references are left into the token container, leading to memory corruption and/or UaF. This change addresses the issue by moving the token removal into the msk destructor. Fixes: 79c0949e ("mptcp: Add key generation and token tree") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
If a MP_JOIN subflow completes the 3whs while another CPU is closing the master msk, we can hit the following race: CPU1 CPU2 close() mptcp_close subflow_syn_recv_sock mptcp_token_get_sock mptcp_finish_join inet_sk_state_load mptcp_token_destroy inet_sk_state_store(TCP_CLOSE) __mptcp_flush_join_list() mptcp_sock_graft list_add_tail sk_common_release sock_orphan() <socket free> The MP_JOIN socket will be leaked. Additionally we can hit UaF for the msk 'struct socket' referenced via the 'conn' field. This change try to address the issue introducing some synchronization between the MP_JOIN 3whs and mptcp_close via the join_list spinlock. If we detect the msk is closing the MP_JOIN socket is closed, too. Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: -
Paolo Abeni authored
Currently unblocking connect() on MPTCP sockets fails frequently. If mptcp_stream_connect() is invoked to complete a previously attempted unblocking connection, it will still try to create the first subflow via __mptcp_socket_create(). If the 3whs is completed and the 'can_ack' flag is already set, the latter will fail with -EINVAL. This change addresses the issue checking for pending connect and delegating the completion to the first subflow. Additionally do msk addresses and sk_state changes only when needed. Fixes: 2303f994 ("mptcp: Associate MPTCP context with TCP socket") Signed-off-by:
-
wenxu authored
Currently add nat mangle action with comparing invert and orig tuple. It is better to check IPS_NAT_MASK flags first to avoid non necessary memcmp for non-NAT conntrack. Signed-off-by:
wenxu <wenxu@ucloud.cn> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Yang Yingliang authored
When devinet_sysctl_register() failed, the memory allocated in neigh_parms_alloc() should be freed. Fixes: 20e61da7 ("ipv4: fail early when creating netdev named all or default") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Jia He authored
When client on the host tries to connect(SOCK_STREAM, O_NONBLOCK) to the server on the guest, there will be a panic on a ThunderX2 (armv8a server): [ 463.718844] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 463.718848] Mem abort info: [ 463.718849] ESR = 0x96000044 [ 463.718852] EC = 0x25: DABT (current EL), IL = 32 bits [ 463.718853] SET = 0, FnV = 0 [ 463.718854] EA = 0, S1PTW = 0 [ 463.718855] Data abort info: [ 463.718856] ISV = 0, ISS = 0x00000044 [ 463.718857] CM = 0, WnR = 1 [ 463.718859] user pgtable: 4k pages, 48-bit VAs, pgdp=0000008f6f6e9000 [ 463.718861] [0000000000000000] pgd=0000000000000000 [ 463.718866] Internal error: Oops: 96000044 [#1] SMP [...] [ 463.718977] CPU: 213 PID: 5040 Comm: vhost-5032 Tainted: G O 5.7.0-rc7+ #139 [ 463.718980] Hardware name: GIGABYTE R281-T91-00/MT91-FS1-00, BIOS F06 09/25/2018 [ 463.718982] pstate: 60400009 (nZCv daif +PAN -UAO) [ 463.718995] pc : virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common] [ 463.718999] lr : virtio_transport_recv_pkt+0x1fc/0xd40 [vmw_vsock_virtio_transport_common] [ 463.719000] sp : ffff80002dbe3c40 [...] [ 463.719025] Call trace: [ 463.719030] virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common] [ 463.719034] vhost_vsock_handle_tx_kick+0x360/0x408 [vhost_vsock] [ 463.719041] vhost_worker+0x100/0x1a0 [vhost] [ 463.719048] kthread+0x128/0x130 [ 463.719052] ret_from_fork+0x10/0x18 The race condition is as follows: Task1 Task2 ===== ===== __sock_release virtio_transport_recv_pkt __vsock_release vsock_find_bound_socket (found sk) lock_sock_nested vsock_remove_sock sock_orphan sk_set_socket(sk, NULL) sk->sk_shutdown = SHUTDOWN_MASK ... release_sock lock_sock virtio_transport_recv_connecting sk->sk_socket->state (panic!) The root cause is that vsock_find_bound_socket can't hold the lock_sock, so there is a small race window between vsock_find_bound_socket() and lock_sock(). If __vsock_release() is running in another task, sk->sk_socket will be set to NULL inadvertently. This fixes it by checking sk->sk_shutdown(suggested by Stefano) after lock_sock since sk->sk_shutdown is set to SHUTDOWN_MASK under the protection of lock_sock_nested. Signed-off-by:Jia He <justin.he@arm.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
- 30 May, 2020 2 commits
-
-
Thomas Falcon authored
VNIC protocol version is reported in big-endian format, but it is not byteswapped before logging. Fix that, and remove version comparison as only one protocol version exists at this time. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Chuhong Yuan authored
st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path. Add the missed function call to fix it. Fixes: 1892bf84 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
- 29 May, 2020 16 commits
-
-
Hangbin Liu authored
In commit 19e16d22 ("neigh: support smaller retrans_time settting") we add more accurate control for ARP and NS. But for ARP I forgot to update the latest guard in neigh_timer_handler(), then the next retransmit would be reset to jiffies + HZ/2 if we set the retrans_time less than 500ms. Fix it by setting the time_before() check to HZ/100. IPv6 does not have this issue. Reported-by:
Jianwen Ji <jiji@redhat.com> Fixes: 19e16d22 ("neigh: support smaller retrans_time settting") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5 fixes 2020-05-28 This series introduces some fixes to mlx5 driver. v1->v2: - Fix bad sha1, Jakub. - Added one more patch by Pablo. net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta() Nothing major, the only patch worth mentioning is the suspend/resume crash fix by adding the missing pci device handlers, the fix is very straight forward and as Dexuan already expressed, the patch is important for Azure users to avoid crash on VM hibernation, patch is marked for -stable v4.6 below. Conflict note: ('net/mlx5e: Fix MLX5_TC_CT dependencies') has a trivial one line conflict with current net-next, which can be resolved by simply using the line from net-next. Please pull and let me know if there is any problem. For -stable v4.6 ('net/mlx5: Fix crash upon suspend/resume') For -stable v5.6 ('net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()') ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-05-29 The following pull-request contains BPF updates for your *net* tree. We've added 6 non-merge commits during the last 7 day(s) which contain a total of 4 files changed, 55 insertions(+), 34 deletions(-). The main changes are: 1) minor verifier fix for fmod_ret progs, from Alexei. 2) af_xdp overflow check, from Bjorn. 3) minor verifier fix for 32bit assignment, from John. 4) powerpc has non-overlapping addr space, from Petr. ==================== Signed-off-by: -
John Fastabend authored
Added a verifier test for assigning 32bit reg states to 64bit where 32bit reg holds a constant value of 0. Without previous kernel verifier.c fix, the test in this patch will fail. Signed-off-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159077335867.6014.2075350327073125374.stgit@john-Precision-5820-Tower
-
John Fastabend authored
After previous fix for zero extension test_verifier tests #65 and #66 now fail. Before the fix we can see the alu32 mov op at insn 10 10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP(id=0, smin_value=4294967168,smax_value=4294967423, umin_value=4294967168,umax_value=4294967423, var_off=(0x0; 0x1ffffffff), s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 10: (bc) w1 = w1 11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP(id=0, smin_value=0,smax_value=2147483647, umin_value=0,umax_value=4294967295, var_off=(0x0; 0xffffffff), s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm After the fix at insn 10 because we have 's32_min_value < 0' the following step 11 now has 'smax_value=U32_MAX' where before we pulled the s32_max_value bound into the smax_value as seen above in 11 with smax_value=2147483647. 10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=4294967168,smax_value=4294967423, umin_value=4294967168,umax_value=4294967423, var_off=(0x0; 0x1ffffffff), s32_min_value=-2147483648, s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 10: (bc) w1 = w1 11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=0,smax_value=4294967295, umin_value=0,umax_value=4294967295, var_off=(0x0; 0xffffffff), s32_min_value=-2147483648, s32_max_value=2147483647, u32_min_value=0, u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm The fall out of this is by the time we get to the failing instruction at step 14 where previously we had the following: 14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=72057594021150720,smax_value=72057594029539328, umin_value=72057594021150720,umax_value=72057594029539328, var_off=(0xffffffff000000; 0xffffff), s32_min_value=-16777216,s32_max_value=-1, u32_min_value=-16777216,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 14: (0f) r0 += r1 We now have, 14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=0,smax_value=72057594037927935, umin_value=0,umax_value=72057594037927935, var_off=(0x0; 0xffffffffffffff), s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 14: (0f) r0 += r1 In the original step 14 'smin_value=72057594021150720' this trips the logic in the verifier function check_reg_sane_offset(), if (smin >= BPF_MAX_VAR_OFF || smin <= -BPF_MAX_VAR_OFF) { verbose(env, "value %lld makes %s pointer be out of bounds\n", smin, reg_type_str[type]); return false; } Specifically, the 'smin <= -BPF_MAX_VAR_OFF' check. But with the fix at step 14 we have bounds 'smin_value=0' so the above check is not tripped because BPF_MAX_VAR_OFF=1<<29. We have a smin_value=0 here because at step 10 the smaller smin_value=0 means the subtractions at steps 11 and 12 bring the smin_value negative. 11: (17) r1 -= 2147483584 12: (17) r1 -= 2147483584 13: (77) r1 >>= 8 Then the shift clears the top bit and smin_value is set to 0. Note we still have the smax_value in the fixed code so any reads will fail. An alternative would be to have reg_sane_check() do both smin and smax value tests. To fix the test we can omit the 'r1 >>=8' at line 13. This will change the err string, but keeps the intention of the test as suggseted by the title, "check after truncation of boundary-crossing range". If the verifier logic changes a different value is likely to be thrown in the error or the error will no longer be thrown forcing this test to be examined. With this change we see the new state at step 13. 13: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP(id=0, smin_value=-4294967168,smax_value=127, umin_value=0,umax_value=18446744073709551615, s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm Giving the expected out of bounds error, "value -4294967168 makes map_value pointer be out of bounds" However, for unpriv case we see a different error now because of the mixed signed bounds pointer arithmatic. This seems OK so I've only added the unpriv_errstr for this. Another optino may have been to do addition on r1 instead of subtraction but I favor the approach above slightly. Signed-off-by: -
John Fastabend authored
With the latest trunk llvm (llvm 11), I hit a verifier issue for test_prog subtest test_verif_scale1. The following simplified example illustrate the issue: w9 = 0 /* R9_w=inv0 */ r8 = *(u32 *)(r1 + 80) /* __sk_buff->data_end */ r7 = *(u32 *)(r1 + 76) /* __sk_buff->data */ ...... w2 = w9 /* R2_w=inv0 */ r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */ r6 += r2 /* R6_w=inv(id=0) */ r3 = r6 /* R3_w=inv(id=0) */ r3 += 14 /* R3_w=inv(id=0) */ if r3 > r8 goto end r5 = *(u32 *)(r6 + 0) /* R6_w=inv(id=0) */ <== error here: R6 invalid mem access 'inv' ... end: In real test_verif_scale1 code, "w9 = 0" and "w2 = w9" are in different basic blocks. In the above, after "r6 += r2", r6 becomes a scalar, which eventually caused the memory access error. The correct register state should be a pkt pointer. The inprecise register state starts at "w2 = w9". The 32bit register w9 is 0, in __reg_assign_32_into_64(), the 64bit reg->smax_value is assigned to be U32_MAX. The 64bit reg->smin_value is 0 and the 64bit register itself remains constant based on reg->var_off. In adjust_ptr_min_max_vals(), the verifier checks for a known constant, smin_val must be equal to smax_val. Since they are not equal, the verifier decides r6 is a unknown scalar, which caused later failure. The llvm10 does not have this issue as it generates different code: w9 = 0 /* R9_w=inv0 */ r8 = *(u32 *)(r1 + 80) /* __sk_buff->data_end */ r7 = *(u32 *)(r1 + 76) /* __sk_buff->data */ ...... r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */ r6 += r9 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */ r3 = r6 /* R3_w=pkt(id=0,off=0,r=0,imm=0) */ r3 += 14 /* R3_w=pkt(id=0,off=14,r=0,imm=0) */ if r3 > r8 goto end ... To fix the above issue, we can include zero in the test condition for assigning the s32_max_value and s32_min_value to their 64-bit equivalents smax_value and smin_value. Further, fix the condition to avoid doing zero extension bounds checks when s32_min_value <= 0. This could allow for the case where bounds 32-bit bounds (-1,1) get incorrectly translated to (0,1) 64-bit bounds. When in-fact the -1 min value needs to force U32_MAX bound. Fixes: 3f50f132 ("bpf: Verifier, do explicit ALU32 bounds tracking") Signed-off-by: -
Alexei Starovoitov authored
Fix the following issue: [ 436.749342] BUG: KASAN: use-after-free in bpf_trampoline_put+0x39/0x2a0 [ 436.749995] Write of size 4 at addr ffff8881ef38b8a0 by task kworker/3:5/2243 [ 436.750712] [ 436.752677] Workqueue: events bpf_prog_free_deferred [ 436.753183] Call Trace: [ 436.756483] bpf_trampoline_put+0x39/0x2a0 [ 436.756904] bpf_prog_free_deferred+0x16d/0x3d0 [ 436.757377] process_one_work+0x94a/0x15b0 [ 436.761969] [ 436.762130] Allocated by task 2529: [ 436.763323] bpf_trampoline_lookup+0x136/0x540 [ 436.763776] bpf_check+0x2872/0xa0a8 [ 436.764144] bpf_prog_load+0xb6f/0x1350 [ 436.764539] __do_sys_bpf+0x16d7/0x3720 [ 436.765825] [ 436.765988] Freed by task 2529: [ 436.767084] kfree+0xc6/0x280 [ 436.767397] bpf_trampoline_put+0x1fd/0x2a0 [ 436.767826] bpf_check+0x6832/0xa0a8 [ 436.768197] bpf_prog_load+0xb6f/0x1350 [ 436.768594] __do_sys_bpf+0x16d7/0x3720 prog->aux->trampoline = tr should be set only when prog is valid. Otherwise prog freeing will try to put trampoline via prog->aux->trampoline, but it may not point to a valid trampoline. Fixes: 6ba43b76 ("bpf: Attachment verification for BPF_MODIFY_RETURN") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
KP Singh <kpsingh@google.com> Link: https://lore.kernel.org/bpf/20200529043839.15824-2-alexei.starovoitov@gmail.com
-
Pablo Neira Ayuso authored
The drivers reports EINVAL to userspace through netlink on invalid meta match. This is confusing since EINVAL is usually reserved for malformed netlink messages. Replace it by more meaningful codes. Fixes: 6d65bc64 ("net/mlx5e: Add mlx5e_flower_parse_meta support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Vlad Buslov authored
Change MLX5_TC_CT config dependencies to include MLX5_ESWITCH instead of MLX5_CORE_EN && NET_SWITCHDEV, which are already required by MLX5_ESWITCH. Without this change mlx5 fails to compile if user disables MLX5_ESWITCH without also manually disabling MLX5_TC_CT. Fixes: 4c3844d9 ("net/mlx5e: CT: Introduce connection tracking") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
Tal Gilboa authored
Add a call to mlx5e_reset_rx/tx_moderation() when enabling/disabling adaptive moderation, in order to select the proper default values. In order to do so, we separate the logic of selecting the moderation values and setting moderion mode (CQE/EQE based). Fixes: 0088cbbc ("net/mlx5e: Enable CQE based moderation on TX CQ") Fixes: 9908aa29 ("net/mlx5e: CQE based moderation") Signed-off-by:
Tal Gilboa <talgi@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Aya Levin authored
Change type of active_fec to u32 to match the type expected by mlx5e_get_fec_mode. Copy active_fec and configured_fec values to unsigned long before preforming bitwise manipulations. Take the same approach when configuring FEC over 50G link modes: copy the policy into an unsigned long and only than preform bitwise operations. Fixes: 2132b71f ("net/mlx5e: Advertise globaly supported FEC modes") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
-
Maor Dickman authored
On tunnel decap rule insertion, the indirect mechanism will attempt to offload the rule on all uplink representors which will trigger the "devices are not on same switch HW, can't offload forwarding" message for the uplink which isn't on the same switch HW as the VF representor. The above flow is valid and shouldn't cause warning message, fix by removing the warning and only report this flow using extack. Fixes: 32134847 ("net/mlx5e: Fix allowed tc redirect merged eswitch offload cases") Signed-off-by:
Maor Dickman <maord@mellanox.com> Reviewed-by:
-
Roi Dayan authored
It's bytes, packets, lastused. Fixes: fcb64c0f ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by:
-
Mark Bloch authored
Currently a Linux system with the mlx5 NIC always crashes upon hibernation - suspend/resume. Add basic callbacks so the NIC could be suspended and resumed. Fixes: 9603b61d ("mlx5: Move pci device handling from mlx5_ib to mlx5_core") Tested-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Mark Bloch <markb@mellanox.com> Reviewed-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2020-05-29 1) Several fixes for ESP gro/gso in transport and beet mode when IPv6 extension headers are present. From Xin Long. 2) Fix a wrong comment on XFRMA_OFFLOAD_DEV. From Antony Antony. 3) Fix sk_destruct callback handling on ESP in TCP encapsulation. From Sabrina Dubroca. 4) Fix a use after free in xfrm_output_gso when used with vxlan. From Xin Long. 5) Fix secpath handling of VTI when used wiuth IPCOMP. From Xin Long. 6) Fix an oops when deleting a x-netns xfrm interface. From Nicolas Dichtel. 7) Fix a possible warning on policy updates. We had a case where it was possible to add two policies with the same lookup keys. From Xin Long. ==================== Signed-off-by: -
Xin Long authored
This patch is to fix a crash: [ ] kasan: GPF could be caused by NULL-ptr deref or user memory access [ ] general protection fault: 0000 [#1] SMP KASAN PTI [ ] RIP: 0010:ipv6_local_error+0xac/0x7a0 [ ] Call Trace: [ ] xfrm6_local_error+0x1eb/0x300 [ ] xfrm_local_error+0x95/0x130 [ ] __xfrm6_output+0x65f/0xb50 [ ] xfrm6_output+0x106/0x46f [ ] udp_tunnel6_xmit_skb+0x618/0xbf0 [ip6_udp_tunnel] [ ] vxlan_xmit_one+0xbc6/0x2c60 [vxlan] [ ] vxlan_xmit+0x6a0/0x4276 [vxlan] [ ] dev_hard_start_xmit+0x165/0x820 [ ] __dev_queue_xmit+0x1ff0/0x2b90 [ ] ip_finish_output2+0xd3e/0x1480 [ ] ip_do_fragment+0x182d/0x2210 [ ] ip_output+0x1d0/0x510 [ ] ip_send_skb+0x37/0xa0 [ ] raw_sendmsg+0x1b4c/0x2b80 [ ] sock_sendmsg+0xc0/0x110 This occurred when sending a v4 skb over vxlan6 over ipsec, in which case skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries to get ipv6 info from a ipv4 sk. This issue was actually fixed by Commit 628e341f ("xfrm: make local error reporting more robust"), but brought back by Commit 844d4874 ("xfrm: choose protocol family by skb protocol"). So to fix it, we should call xfrm6_local_error() only when skb->protocol is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6. Fixes: 844d4874 ("xfrm: choose protocol family by skb protocol") Reported-by:
Xiumei Mu <xmu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
- 28 May, 2020 5 commits
-
-
Eric Dumazet authored
Recent change in virtio_net_hdr_to_skb() broke some packetdrill tests. When --mss=XXX option is set, packetdrill always provide gso_type & gso_size for its inbound packets, regardless of packet size. if (packet->tcp && packet->mss) { if (packet->ipv4) gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4; else gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6; gso.gso_size = packet->mss; } Since many other programs could do the same, relax virtio_net_hdr_to_skb() to no longer return an error, but instead ignore gso settings. This keeps Willem intent to make sure no malicious packet could reach gso stack. Note that TCP stack has a special logic in tcp_set_skb_tso_segs() to clear gso_size for small packets. Fixes: 6dd912f8 ("net: check untrusted gso_size at kernel entry") Signed-off-by:Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Jonas Falkevik authored
Make sure SCTP_ADDR_{MADE_PRIM,ADDED} are sent only for associations that have been established. These events are described in rfc6458#section-6.1 SCTP_PEER_ADDR_CHANGE: This tag indicates that an address that is part of an existing association has experienced a change of state (e.g., a failure or return to service of the reachability of an endpoint via a specific transport address). Signed-off-by:Jonas Falkevik <jonas.falkevik@gmail.com> Acked-by:
-
Qiushi Wu authored
kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb7183" fixed a similar problem. Fixes: 07699f9a ("bonding: add sysfs /slave dir for bond slave devices.") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Uninitialized when used in __nf_conntrack_update(), from Nathan Chancellor. 2) Comparison of unsigned expression in nf_confirm_cthelper(). 3) Remove 'const' type qualifier with no effect. ==================== Signed-off-by: -
Petr Mladek authored
The commit 0ebeea8c ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") caused that bpf_probe_read{, str}() functions were not longer available on architectures where the same logical address might have different content in kernel and user memory mapping. These architectures should use probe_read_{user,kernel}_str helpers. For backward compatibility, the problematic functions are still available on architectures where the user and kernel address spaces are not overlapping. This is defined CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE. At the moment, these backward compatible functions are enabled only on x86_64, arm, and arm64. Let's do it also on powerpc that has the non overlapping address space as well. Fixes: 0ebeea8c ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/lkml/20200527122844.19524-1-pmladek@suse.com
-
- 27 May, 2020 8 commits
-
-
Vladimir Oltean authored
Be there a platform with the following layout: Regular NIC | +----> DSA master for switch port | +----> DSA master for another switch port After changing DSA back to static lockdep class keys in commit 1a33e10e ("net: partially revert dynamic lockdep key changes"), this kernel splat can be seen: [ 13.361198] ============================================ [ 13.366524] WARNING: possible recursive locking detected [ 13.371851] 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988 Not tainted [ 13.377874] -------------------------------------------- [ 13.383201] swapper/0/0 is trying to acquire lock: [ 13.388004] ffff0000668ff298 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0 [ 13.397879] [ 13.397879] but task is already holding lock: [ 13.403727] ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0 [ 13.413593] [ 13.413593] other info that might help us debug this: [ 13.420140] Possible unsafe locking scenario: [ 13.420140] [ 13.426075] CPU0 [ 13.428523] ---- [ 13.430969] lock(&dsa_slave_netdev_xmit_lock_key); [ 13.435946] lock(&dsa_slave_netdev_xmit_lock_key); [ 13.440924] [ 13.440924] *** DEADLOCK *** [ 13.440924] [ 13.446860] May be due to missing lock nesting notation [ 13.446860] [ 13.453668] 6 locks held by swapper/0/0: [ 13.457598] #0: ffff800010003de0 ((&idev->mc_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x400 [ 13.466593] #1: ffffd4d3fb478700 (rcu_read_lock){....}-{1:2}, at: mld_sendpack+0x0/0x560 [ 13.474803] #2: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x64/0xb10 [ 13.483886] #3: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0 [ 13.492793] #4: ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0 [ 13.503094] #5: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0 [ 13.512000] [ 13.512000] stack backtrace: [ 13.516369] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988 [ 13.530421] Call trace: [ 13.532871] dump_backtrace+0x0/0x1d8 [ 13.536539] show_stack+0x24/0x30 [ 13.539862] dump_stack+0xe8/0x150 [ 13.543271] __lock_acquire+0x1030/0x1678 [ 13.547290] lock_acquire+0xf8/0x458 [ 13.550873] _raw_spin_lock+0x44/0x58 [ 13.554543] __dev_queue_xmit+0x84c/0xbe0 [ 13.558562] dev_queue_xmit+0x24/0x30 [ 13.562232] dsa_slave_xmit+0xe0/0x128 [ 13.565988] dev_hard_start_xmit+0xf4/0x448 [ 13.570182] __dev_queue_xmit+0x808/0xbe0 [ 13.574200] dev_queue_xmit+0x24/0x30 [ 13.577869] neigh_resolve_output+0x15c/0x220 [ 13.582237] ip6_finish_output2+0x244/0xb10 [ 13.586430] __ip6_finish_output+0x1dc/0x298 [ 13.590709] ip6_output+0x84/0x358 [ 13.594116] mld_sendpack+0x2bc/0x560 [ 13.597786] mld_ifc_timer_expire+0x210/0x390 [ 13.602153] call_timer_fn+0xcc/0x400 [ 13.605822] run_timer_softirq+0x588/0x6e0 [ 13.609927] __do_softirq+0x118/0x590 [ 13.613597] irq_exit+0x13c/0x148 [ 13.616918] __handle_domain_irq+0x6c/0xc0 [ 13.621023] gic_handle_irq+0x6c/0x160 [ 13.624779] el1_irq+0xbc/0x180 [ 13.627927] cpuidle_enter_state+0xb4/0x4d0 [ 13.632120] cpuidle_enter+0x3c/0x50 [ 13.635703] call_cpuidle+0x44/0x78 [ 13.639199] do_idle+0x228/0x2c8 [ 13.642433] cpu_startup_entry+0x2c/0x48 [ 13.646363] rest_init+0x1ac/0x280 [ 13.649773] arch_call_rest_init+0x14/0x1c [ 13.653878] start_kernel+0x490/0x4bc Lockdep keys themselves were added in commit ab92d68f ("net: core: add generic lockdep keys"), and it's very likely that this splat existed since then, but I have no real way to check, since this stacked platform wasn't supported by mainline back then. >From Taehee's own words: This patch was considered that all stackable devices have LLTX flag. But the dsa doesn't have LLTX, so this splat happened. After this patch, dsa shares the same lockdep class key. On the nested dsa interface architecture, which you illustrated, the same lockdep class key will be used in __dev_queue_xmit() because dsa doesn't have LLTX. So that lockdep detects deadlock because the same lockdep class key is used recursively although actually the different locks are used. There are some ways to fix this problem. 1. using NETIF_F_LLTX flag. If possible, using the LLTX flag is a very clear way for it. But I'm so sorry I don't know whether the dsa could have LLTX or not. 2. using dynamic lockdep again. It means that each interface uses a separate lockdep class key. So, lockdep will not detect recursive locking. But this way has a problem that it could consume lockdep class key too many. Currently, lockdep can have 8192 lockdep class keys. - you can see this number with the following command. cat /proc/lockdep_stats lock-classes: 1251 [max: 8192] ... The [max: 8192] means that the maximum number of lockdep class keys. If too many lockdep class keys are registered, lockdep stops to work. So, using a dynamic(separated) lockdep class key should be considered carefully. In addition, updating lockdep class key routine might have to be existing. (lockdep_register_key(), lockdep_set_class(), lockdep_unregister_key()) 3. Using lockdep subclass. A lockdep class key could have 8 subclasses. The different subclass is considered different locks by lockdep infrastructure. But "lock-classes" is not counted by subclasses. So, it could avoid stopping lockdep infrastructure by an overflow of lockdep class keys. This approach should also have an updating lockdep class key routine. (lockdep_set_subclass()) 4. Using nonvalidate lockdep class key. The lockdep infrastructure supports nonvalidate lockdep class key type. It means this lockdep is not validated by lockdep infrastructure. So, the splat will not happen but lockdep couldn't detect real deadlock case because lockdep really doesn't validate it. I think this should be used for really special cases. (lockdep_set_novalidate_class()) Further discussion here: https://patchwork.ozlabs.org/project/netdev/patch/20200503052220.4536-2-xiyou.wangcong@gmail.com/ There appears to be no negative side-effect to declaring lockless TX for the DSA virtual interfaces, which means they handle their own locking. So that's what we do to make the splat go away. Patch tested in a wide variety of cases: unicast, multicast, PTP, etc. Fixes: ab92d68f ("net: core: add generic lockdep keys") Suggested-by:Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
As explained in other commits before (b9cd75e6 and 87b0f983), ocelot switches have a single egress-untagged VLAN per port, and the driver would deny adding a second one while an egress-untagged VLAN already exists. But on the CPU port (where the VLAN configuration is implicit, because there is no net device for the bridge to control), the DSA core attempts to add a VLAN using the same flags as were used for the front-panel port. This would make adding any untagged VLAN fail due to the CPU port rejecting the configuration: bridge vlan add dev swp0 vid 100 pvid untagged [ 1865.854253] mscc_felix 0000:00:00.5: Port already has a native VLAN: 1 [ 1865.860824] mscc_felix 0000:00:00.5: Failed to add VLAN 100 to port 5: -16 (note that port 5 is the CPU port and not the front-panel swp0). So this hardware will send all VLANs as tagged towards the CPU. Fixes: 56051948 ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by:
-
Arnd Bergmann authored
Clang-10 and clang-11 run into a corner case of the register allocator on 32-bit ARM, leading to excessive stack usage from register spilling: net/bridge/br_multicast.c:2422:6: error: stack frame size of 1472 bytes in function 'br_multicast_get_stats' [-Werror,-Wframe-larger-than=] Work around this by marking one of the internal functions as noinline_for_stack. Link: https://bugs.llvm.org/show_bug.cgi?id=45802#c9Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Stefano Garzarella authored
The accept(2) is an "input" socket interface, so we should use SO_RCVTIMEO instead of SO_SNDTIMEO to set the timeout. So this patch replace sock_sndtimeo() with sock_rcvtimeo() to use the right timeout in the vsock_accept(). Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Signed-off-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Heinrich Kuhn authored
Prior to this change the correct value for the used counter is calculated but not stored nor, therefore, propagated to user-space. In use-cases such as OVS use-case at least this results in active flows being removed from the hardware datapath. Which results in both unnecessary flow tear-down and setup, and packet processing on the host. This patch addresses the problem by saving the calculated used value which allows the value to propagate to user-space. Found by inspection. Fixes: aa6ce2ea ("nfp: flower: support stats update for merge flows") Signed-off-by:
Heinrich Kuhn <heinrich.kuhn@netronome.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Davide Caratti authored
this command hangs forever: # tc qdisc add dev eth0 root fq_pie flows 65536 watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [tc:1028] [...] CPU: 1 PID: 1028 Comm: tc Not tainted 5.7.0-rc6+ #167 RIP: 0010:fq_pie_init+0x60e/0x8b7 [sch_fq_pie] Code: 4c 89 65 50 48 89 f8 48 c1 e8 03 42 80 3c 30 00 0f 85 2a 02 00 00 48 8d 7d 10 4c 89 65 58 48 89 f8 48 c1 e8 03 42 80 3c 30 00 <0f> 85 a7 01 00 00 48 8d 7d 18 48 c7 45 10 46 c3 23 00 48 89 f8 48 RSP: 0018:ffff888138d67468 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 1ffff9200018d2b2 RBX: ffff888139c1c400 RCX: ffffffffffffffff RDX: 000000000000c5e8 RSI: ffffc900000e5000 RDI: ffffc90000c69590 RBP: ffffc90000c69580 R08: fffffbfff79a9699 R09: fffffbfff79a9699 R10: 0000000000000700 R11: fffffbfff79a9698 R12: ffffc90000c695d0 R13: 0000000000000000 R14: dffffc0000000000 R15: 000000002347c5e8 FS: 00007f01e1850e40(0000) GS:ffff88814c880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000067c340 CR3: 000000013864c000 CR4: 0000000000340ee0 Call Trace: qdisc_create+0x3fd/0xeb0 tc_modify_qdisc+0x3be/0x14a0 rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x121/0x350 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 we can't accept 65536 as a valid number for 'nflows', because the loop on 'idx' in fq_pie_init() will never end. The extack message is correct, but it doesn't say that 0 is not a valid number for 'flows': while at it, fix this also. Add a tdc selftest to check correct validation of 'flows'. CC: Ivan Vecera <ivecera@redhat.com> Fixes: ec97ecf1 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Pablo Neira Ayuso authored
>> include/linux/netfilter/nf_conntrack_pptp.h:13:20: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers] extern const char *const pptp_msg_name(u_int16_t msg); ^~~~~~ Reported-by:
kbuild test robot <lkp@intel.com> Fixes: 4c559f15 ("netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code") Signed-off-by:
-
Pablo Neira Ayuso authored
net/netfilter/nf_conntrack_core.c: In function nf_confirm_cthelper: net/netfilter/nf_conntrack_core.c:2117:15: warning: comparison of unsigned expression in < 0 is always false [-Wtype-limits] 2117 | if (protoff < 0 || (frag_off & htons(~0x7)) != 0) | ^ ipv6_skip_exthdr() returns a signed integer. Reported-by:Colin Ian King <colin.king@canonical.com> Fixes: 703acd70 ("netfilter: nfnetlink_cthelper: unbreak userspace helper support") Signed-off-by:
-
