- 15 Sep, 2023 15 commits
-
-
Jani Nikula authored
Avoid using GEM_WARN_ON() in display code. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/593285450602c259b6985972d68511190c754bf5.1694684044.git.jani.nikula@intel.com
-
Jani Nikula authored
Avoid using GEM_BUG_ON() in display code. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a7d53a403822b43c7d78689a10480b47ccc0534d.1694684044.git.jani.nikula@intel.com
-
Ville Syrjälä authored
We aren't intending to mutate the SDVO device mapping structs, so make them const. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-13-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Remove the i915 specific i2c-N symlink from HDMI connectors. This was added to sort of mirror the DP connectors that alreayd had their aux ch based i2c adapter sitting beneath them in the sysfs hierarchy. But now that we have the standard "ddc" symlink approach provided by the core let's switch to that fully. I don't think anything beyond igt depends on this. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-12-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Remove the mostly redundant hdmi->ddc_bus. The only thing that needs it anymore is get_encoder_by_ddc_bus(), but that can be replaced with a slight detour through attached_connector+intel_gmbus_get_adapter(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-11-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
We already populate connector->ddc for HDMI ports, but so far we've not taken full advantage of it. Do that by eliminating a bunch of intel_gmbus_get_adapter() lookups. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-10-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Populate connector->ddc, and thus create the "ddc" symlink in sysfs for DP MST connectors. TODO: test that this actually works References: https://gitlab.freedesktop.org/drm/intel/-/issues/3605Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-9-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Populate connector->ddc, and thus create the "ddc" symlink in sysfs for analog DP SST connectors. Let's also reorder intel_dp_aux_init() vs. drm_connector_init_with_ddc() a bit to make sure the i2c aux ch is at least somewhat populated before we pass it on, though drm_connector_init_with_ddc() does not actually do anything with it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-8-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Populate connector->ddc, and thus create the "ddc" symlink in sysfs for DVO connectors. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-7-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Populate connector->ddc, and thus create the "ddc" symlink in sysfs for analog VGA connectors. As a bonus we can replace a bunch of intel_gmbus_get_adapter() lookups with just the connector->ddc pointer. Sadly one extra lookup still remains due to the g4x DVI-I shenanigans. We could perhaps consider borrowing the ddc proxy idea from SDVO to deal with that in a perhaps nicer way, but can't really be bothered right now at least. Also not sure exposing such a dual ddc bus to userspace would be quite wise. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-6-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Populate connector->ddc, and thus create the "ddc" symlink in sysfs for the LVDS port. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-5-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Rename the various names we've used for the DDC bus i2c adapter ("i2c", "adapter", etc.) to just "ddc". This differentiates it from the various other i2c busses we might have (DSI panel stuff, DVO control bus, etc.). v2: Don't add a bogus drm_get_edid() call (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230831104300.29688-1-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Currently drm_sysfs_connector_add() attempts to register the "ddc" symlink (based one connector->ddc) before the driver's .early_register() hook has been called. That is too early for i915 which only fully registers the aux ch and associated i2c bus from said hook (to prevent half initialized stuff getting exposed to userspace). This causes my attempt at using drm_connector_init_with_ddc() to fail, and the entire connector disappears from sysfs on account of sysfs_create_link() failing. To fix that split the sysfs symlink stuff into separate functions (drm_sysfs_connector_add_late() and drm_sysfs_connector_remove_early()) which are called on the opposite side of the .later_register() and .early_unregister() hooks. Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-3-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
-
Ville Syrjälä authored
Use the standard onion peeling approach and call drm_debugfs_connector_remove() and drm_sysfs_connector_remove() in the reverse order in drm_connector_unregister() than what we called their add counterpartse in drm_connector_register(). The error unwiding in drm_connector_register() is already doing this the correct way around. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-2-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
-
Jani Nikula authored
Sync to v6.6-rc1. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
- 14 Sep, 2023 1 commit
-
-
Suraj Kandpal authored
pic_width when written into the PPS register is divided by the no. of vdsc instances first but the actual variable that we compare it to does not change i.e vdsc_cfg->pic_width hence when reading the register back for pic_width it needs to be multiplied by num_vdsc_instances rather than being divided. Fixes: 8b70b569 ("drm/i915/vdsc: Fill the intel_dsc_get_pps_config function") Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230911193742.836063-1-suraj.kandpal@intel.com
-
- 13 Sep, 2023 7 commits
-
-
Ville Syrjälä authored
Track DP enhanced framing properly in the crtc state instead of relying just on the cached DPCD everywhere, and hook it up into the state check and dump. v2: Actually set enhanced_framing in .compute_config() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230503113659.16305-1-ville.syrjala@linux.intel.comReviewed-by: Luca Coelho <luciano.coelho@intel.com>
-
Ville Syrjälä authored
We always check whether combo PHYs need to be re-initialized after disabling DC states, which leads to log spam. Switch things around so that we only log something when we actually have to re-initialized a PHY. The log spam was exacerbated by commit 41b4c7fe ("drm/i915: Disable DC states for all commits") since we now disable DC states far more often. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-12-ville.syrjala@linux.intel.comReviewed-by: Luca Coelho <luciano.coelho@intel.com>
-
Ville Syrjälä authored
encoder->get_config() is not the place where the state should be dumped. Get rid of the spam. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-10-ville.syrjala@linux.intel.comReviewed-by: Luca Coelho <luciano.coelho@intel.com>
-
Ville Syrjälä authored
Split some overly long lines in hsw_fdi_link_train(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-8-ville.syrjala@linux.intel.comReviewed-by: Luca Coelho <luciano.coelho@intel.com>
-
Ville Syrjälä authored
Stop dumping state while reading it out. We have a proper place for that stuff. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-7-ville.syrjala@linux.intel.comReviewed-by: Luca Coelho <luciano.coelho@intel.com>
-
Ville Syrjälä authored
On pre-TGL FEC is a port level feature, not a transcoder level feature, and it's DDI A which doesn't have it, not trancoder A. Check for the correct thing when determining whether FEC is supported or not. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-5-ville.syrjala@linux.intel.comReviewed-by: Luca Coelho <luciano.coelho@intel.com>
-
Ville Syrjälä authored
The MST codepath is missing FEC readout. Add it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-4-ville.syrjala@linux.intel.comReviewed-by: Luca Coelho <luciano.coelho@intel.com>
-
- 12 Sep, 2023 1 commit
-
-
Jani Nikula authored
intel_gtt.h is indirectly included absolutely everywhere in the driver. DBG() is too short a name. Rename it GTT_TRACE() after GEM_TRACE(). Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230911123305.1682554-1-jani.nikula@intel.com
-
- 11 Sep, 2023 9 commits
-
-
Jani Nikula authored
Use the register helper macros for PPS0 and PPS1 register contents. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0dfebe37a391a5ceb8bfae8e16383f1e5aef815d.1693933849.git.jani.nikula@intel.com
-
Jani Nikula authored
Improve clarity by specifying the PPS number in the register content macros. It's easier to notice if macros are being used for the wrong register. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/58de57b04ad2da5207f52c56c9e40663aaf16173.1693933849.git.jani.nikula@intel.com
-
Jani Nikula authored
Unify comments to be the simple "PPS n" instead of all sorts of variants. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/915970973ef117fc8d47fbc57e8fa296235ad3e3.1693933849.git.jani.nikula@intel.com
-
Jani Nikula authored
Directly assign the values instead of first assigning 0 and then |= the values. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d752a148cc84558b76c8c3dacd9c0b2e0a4efd91.1693933849.git.jani.nikula@intel.com
-
Jani Nikula authored
Make the function name conform to existing style better. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e793056e610ee8cfe2a8d69605402cd2445a517a.1693933849.git.jani.nikula@intel.com
-
Jani Nikula authored
Register read functions usually return the value instead of passing via pointer parameters. Return the multiple register verification results via a pointer parameter, which can also be NULL to skip the extra checks. Make the name conform to existing style better while at it. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4d08c0f63c4975cc8cd01b0f82845c989bf13dd0.1693933849.git.jani.nikula@intel.com
-
Jani Nikula authored
Register read functions usually return the value instead of passing via pointer parameters. The calling code becomes easier to read. Make the name conform to existing style better while at it. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/89b7d70bb19114ab3ff0e150a4b862d8032f136d.1693933849.git.jani.nikula@intel.com
-
Jani Nikula authored
Make it clear what's the number of vdsc per pipe, and what's the number of registers to grab. Have intel_dsc_get_pps_reg() return the registers it knows even if the requested amount is bigger. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e2551b52ac0dd2b4ffe18d5e7733fafdc191d68a.1693933849.git.jani.nikula@intel.com
-
Ville Syrjälä authored
Apparently Acer Chromebook C740 (BDW-ULT) doesn't have the eDP HPD line properly connected, and thus fails the new HPD check during eDP probe. The result is that we lose the eDP output. I suspect all such machines would be Chromebooks or other Linux exclusive systems as the Windows driver likely wouldn't work either. I did check a few other BDW machines here and those do have eDP HPD connected, one of them even is a different Chromebook (Samus). To account for these funky machines let's skip the HPD check when it looks like the eDP port is the only one using that specific AUX channel. In case of multiple ports sharing the same AUX CH (eg. on Asrock B250M-HDV) we still do the check and thus should correctly ignore the eDP port in favor of the other DP port (usually a DP->VGA converter). v2: Don't oops during list iteration Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9264 Fixes: cfe5bdfb ("drm/i915: Check HPD live state during eDP probe") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230908052527.685-1-ville.syrjala@linux.intel.comReviewed-by: Luca Coelho <luciano.coelho@intel.com>
-
- 10 Sep, 2023 6 commits
-
-
Linus Torvalds authored
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm ci scripts from Dave Airlie: "This is a bunch of ci integration for the freedesktop gitlab instance where we currently do upstream userspace testing on diverse sets of GPU hardware. From my perspective I think it's an experiment worth going with and seeing how the benefits/noise playout keeping these files useful. Ideally I'd like to get this so we can do pre-merge testing on PRs eventually. Below is some info from danvet on why we've ended up making the decision and how we can roll it back if we decide it was a bad plan. Why in upstream? - like documentation, testcases, tools CI integration is one of these things where you can waste endless amounts of time if you accidentally have a version that doesn't match your source code - but also like the above, there's a balance, this is the initial cut of what we think makes sense to keep in sync vs out-of-tree, probably needs adjustment - gitlab supports out-of-repo gitlab integration and that's what's been used for the kernel in drm, but it results in per-driver fragmentation and lots of duplicated effort. the simple act of smashing an arbitrary winner into a topic branch already started surfacing patches on dri-devel and sparking good cross driver team discussions Why gitlab? - it's not any more shit than any of the other CI - drm userspace uses it extensively for everything in userspace, we have a lot of people and experience with this, including integration of hw testing labs - media userspace like gstreamer is also on gitlab.fd.o, and there's discussion to extend this to the media subsystem in some fashion Can this be shared? - there's definitely a pile of code that could move to scripts/ if other subsystem adopt ci integration in upstream kernel git. other bits are more drm/gpu specific like the igt-gpu-tests/tools integration - docker images can be run locally or in other CI runners Will we regret this? - it's all in one directory, intentionally, for easy deletion - probably 1-2 years in upstream to see whether this is worth it or a Big Mistake. that's roughly what it took to _really_ roll out solid CI in the bigger userspace projects we have on gitlab.fd.o like mesa3d" * tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm: drm: ci: docs: fix build warning - add missing escape drm: Add initial ci/ subdirectory
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Fix preemption delays in the SGX code, remove unnecessarily UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and make the x86 SMP init code a bit more conservative to fix kexec() lockups" * tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Break up long non-preemptible delays in sgx_vepc_release() x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld x86/smp: Don't send INIT to non-present and non-booted CPUs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf event fix from Ingo Molnar: "Work around a firmware bug in the uncore PMU driver, affecting certain Intel systems" * tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Correct the number of CHAs on EMR
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools updates from Arnaldo Carvalho de Melo: "perf tools maintainership: - Add git information for perf-tools and perf-tools-next trees and branches to the MAINTAINERS file. That is where development now takes place and myself and Namhyung Kim have write access, more people to come as we emulate other maintainer groups. perf record: - Record kernel data maps when 'perf record --data' is used, so that global variables can be resolved and used in tools that do data profiling. perf trace: - Remove the old, experimental support for BPF events in which a .c file was passed as an event: "perf trace -e hello.c" to then get compiled and loaded. The only known usage for that, that shipped with the kernel as an example for such events, augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all the user space components and the BPF code connected to the syscalls. In the end just the way to glue the BPF part and the user space type beautifiers changed, now being performed by libbpf skeletons. The next step is to use BTF to do pretty printing of all syscall types, as discussed with Alan Maguire and others. Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings, some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds: # perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5 0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 ? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0 10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ... ? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 ? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0 3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ... 3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0 Performance counter stats for 'sleep 5': 2,617,347 cycles 1,855,997 instructions # 0.71 insn per cycle 5.002282128 seconds time elapsed 0.000855000 seconds user 0.000852000 seconds sys perf annotate: - Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for licensing reasons, and we missed a build test on tools/perf/tests makefile. Since we now default to NDEBUG=1, we ended up segfaulting when building with BUILD_NONDISTRO=1 because a needed initialization routine was being "error checked" via an assert. Fix it by explicitly checking the result and aborting instead if it fails. We better back propagate the error, but at least 'perf annotate' on samples collected for a BPF program is back working when perf is built with BUILD_NONDISTRO=1. perf report/top: - Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'. - Fix the number of entries for 'e' key in the TUI that was preventing navigation of lines when expanding an entry. perf report/script: - Support cross platform register handling, allowing a perf.data file collected on one architecture to have registers sampled correctly displayed when analysis tools such as 'perf report' and 'perf script' are used on a different architecture. - Fix handling of event attributes in pipe mode, i.e. when one uses: perf record -o - | perf report -i - When no perf.data files are used. - Handle files generated via pipe mode with a version of perf and then read also via pipe mode with a different version of perf, where the event attr record may have changed, use the record size field to properly support this version mismatch. perf probe: - Accessing global variables from uprobes isn't supported, make the error message state that instead of stating that some minimal kernel version is needed to have that feature. This seems just a tool limitation, the kernel probably has all that is needed. perf tests: - Fix a reference count related leak in the dlfilter v0 API where the result of a thread__find_symbol_fb() is not matched with an addr_location__exit() to drop the reference counts of the resolved components (machine, thread, map, symbol, etc). Add a dlfilter test to make sure that doesn't regresses. - Lots of fixes for the 'perf test' written in shell script related to problems found with the shellcheck utility. - Fixes for 'perf test' shell scripts testing features enabled when perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters. - Add perf record sample filtering test, things like the following example, that gets implemented as a BPF filter attached to the event: # perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000' - Improve the way the task_analyzer test checks if libtraceevent is linked, using 'perf version --build-options' instead of the more expensinve 'perf record -e "sched:sched_switch"'. - Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents). libperf: - Implement riscv mmap support (This went as well via the RiscV tree, same contents). perf script: - New tool that converts perf.data files to the firefox profiler format so that one can use the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's Google Summer of Code. One can generate the output and upload it to the web interface but Anup also automated everything: perf script gecko -F 99 -a sleep 60 - Support syscall name parsing on arm64. - Print "cgroup" field on the same line as "comm". perf bench: - Add new 'uprobe' benchmark to measure the overhead of uprobes with/without BPF programs attached to it. - breakpoints are not available on power9, skip that test. perf stat: - Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra 'perf test' check that exemplifies its purpose: TEST_ASSERT_VAL("#num_cpus_online", expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0); TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0); TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online); Miscellaneous: - Improve tool startup time by lazily reading PMU, JSON, sysfs data. - Improve error reporting in the parsing of events, passing YYLTYPE to error routines, so that the output can show were the parsing error was found. - Add 'perf test' entries to check the parsing of events improvements. - Fix various leak for things detected by -fsanitize=address, mostly things that would be freed at tool exit, including: - Free evsel->filter on the destructor. - Allow tools to register a thread->priv destructor and use it in 'perf trace'. - Free evsel->priv in 'perf trace'. - Free string returned by synthesize_perf_probe_point() when the caller fails to do all it needs. - Adjust various compiler options to not consider errors some warnings when building with broken headers found in things like python, flex, bison, as we otherwise build with -Werror. Some for gcc, some for clang, some for some specific version of those, some for some specific version of flex or bison, or some specific combination of these components, bah. - Allow customization of clang options for BPF target, this helps building on gentoo where there are other oddities where BPF targets gets passed some compiler options intended for the native build, so building with WERROR=0 helps while these oddities are fixed. - Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock', fixing some segfaults when handling some odd failures. - Add LTO build option. - Fix format of unordered lists in the perf docs (tools/perf/Documentation) - Overhaul the bison files, using constructs such as YYNOMEM. - Remove unused tokens from the bison .y files. - Add more comments to various structs. - A few LoongArch enablement patches. Vendor events (JSON): - Add JSON metrics for Yitian 710 DDR (aarch64). Things like: EventName, BriefDescription visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.", visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.", op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.", op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.", op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.", - Add AmpereOne metrics (aarch64). - Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo. - Update scale units and descriptions of common topdown metrics on aarch64. Things like: - "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)", - "BriefDescription": "Frontend bound L1 topdown metric", + "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))", + "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.", - Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints. - Update files for the power10 platform" * tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits) perf parse-events: Fix driver config term perf parse-events: Fixes relating to no_value terms perf parse-events: Fix propagation of term's no_value when cloning perf parse-events: Name the two term enums perf list: Don't print Unit for "default_core" perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake perf dlfilter: Avoid leak in v0 API test use of resolve_address() perf metric: Add #num_cpus_online literal perf pmu: Remove str from perf_pmu_alias perf parse-events: Make common term list to strbuf helper perf parse-events: Minor help message improvements perf pmu: Avoid uninitialized use of alias->str perf jevents: Use "default_core" for events with no Unit perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test perf test shell stat_bpf_counters: Fix test on Intel perf test shell record_bpf_filter: Skip 6.2 kernel libperf: Get rid of attr.id field perf tools: Convert to perf_record_header_attr_id() libperf: Add perf_record_header_attr_id() perf tools: Handle old data in PERF_RECORD_ATTR ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - six smb3 client fixes including ones to allow controlling smb3 directory caching timeout and limits, and one debugging improvement - one fix for nls Kconfig (don't need to expose NLS_UCS2_UTILS option) - one minor spnego registry update * tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: spnego: add missing OID to oid registry smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU cifs: update internal module version number for cifs.ko smb3: allow controlling maximum number of cached directories smb3: add trace point for queryfs (statfs) nls: Hide new NLS_UCS2_UTILS smb3: allow controlling length of time directory entries are cached with dir leases smb: propagate error code of extract_sharename()
-
- 09 Sep, 2023 1 commit
-
-
David Howells authored
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with as they require userspace VM interaction. ITER_DISCARD isn't dealt with either as that can't be extracted. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <brauner@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-