- 29 Apr, 2008 40 commits
-
-
Randy Dunlap authored
Fix kernel bugzilla #10388. DMA-API.txt has wrong argument type for some functions. It uses struct device but should use struct pci_dev. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Arthur Kepner authored
Add a new parameter, dmasync, to the ib_umem_get() prototype. Use dmasync = 1 when mapping user-allocated CQs with ib_umem_get(). Signed-off-by:
Arthur Kepner <akepner@sgi.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jes Sorensen <jes@sgi.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Arthur Kepner authored
Change all ia64 machvecs to use the new dma_*map*_attrs() interfaces. Implement the old dma_*map_*() interfaces in terms of the corresponding new interfaces. For ia64/sn, make use of one dma attribute, DMA_ATTR_WRITE_BARRIER. Introduce swiotlb_*map*_attrs() functions. Signed-off-by:
-
Arthur Kepner authored
Document the new dma_*map*_attrs() functions. [markn@au1.ibm.com: fix up for dma-add-dma_map_attrs-interfaces and update docs] Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jes Sorensen <jes@sgi.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Mark Nelson <markn@au1.ibm.com> Signed-off-by:
-
Arthur Kepner authored
Introduce new interfaces, dma_*map*_attrs(), for passing architecture-specific attributes when memory is mapped and unmapped for DMA. Give the interfaces default implementations which ignore attributes. Also introduce the dma_{set|get}_attr() interfaces for setting and retrieving individual attributes. Define one attribute, DMA_ATTR_WRITE_BARRIER, in anticipation of its use by ia64/sn. Select whether architectures implement arch-specific versions of the dma_*map*_attrs() interfaces via HAVE_DMA_ATTRS in Kconfig. [markn@au1.ibm.com: dma_{set,get}_attr() have to be static inline] Signed-off-by: -
Oleg Nesterov authored
cpu_hotplug_begin() must be always called under cpu_add_remove_lock, this means that only one process can be cpu_hotplug.active_writer. So we don't need the cpu_hotplug.writer_queue, we can wake up the ->active_writer directly. Also, fix the comment. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Dipankar Sarma <dipankar@in.ibm.com> Acked-by:
Gautham R Shenoy <ego@in.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Signed-off-by:
-
Oleg Nesterov authored
cleanup_workqueue_thread() doesn't need the second argument, remove it. Signed-off-by:
-
Oleg Nesterov authored
When cpu_populated_map was introduced, it was supposed that cwq->thread can survive after CPU_DEAD, that is why we never shrink cpu_populated_map. This is not very nice, we can safely remove the already dead CPU from the map. The only required change is that destroy_workqueue() must hold the hotplug lock until it destroys all cwq->thread's, to protect the cpu_populated_map. We could make the local copy of cpu mask and drop the lock, but sizeof(cpumask_t) may be very large. Also, fix the comment near queue_work(). Unless _cpu_down() happens we do guarantee the cpu-affinity of the work_struct, and we have users which rely on this. [akpm@linux-foundation.org: repair comment] Signed-off-by:
-
Paul Menage authored
This flag provides the hardwalling properties of mem_exclusive, without enforcing the exclusivity. Either mem_hardwall or mem_exclusive is sufficient to prevent GFP_KERNEL allocations from passing outside the cpuset's assigned nodes. Signed-off-by:
Paul Menage <menage@google.com> Acked-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
-
Paul Menage authored
Currently the cpusets mem_exclusive flag is overloaded to mean both "no-overlapping" and "no GFP_KERNEL allocations outside this cpuset". These patches add a new mem_hardwall flag with just the allocation restriction part of the mem_exclusive semantics, without breaking backwards-compatibility for those who continue to use just mem_exclusive. Additionally, the cgroup control file registration for cpusets is cleaned up to reduce boilerplate. This patch: This change tidies up the cpusets control file definitions, and reduces the amount of boilerplate required to add/change control files in the future. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
-
Adrian Bunk authored
Make the following needlessly global functions static: - cpuset_test_cpumask() - cpuset_change_cpumask() - cpuset_do_move_task() Signed-off-by:
Adrian Bunk <bunk@kernel.org> Acked-by:
-
Li Zefan authored
*mem has been zeroed, that means mem->info has already been filled with 0. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
On ia64, this kmalloc() requires order-4 pages. But this is not necessary to be physically contiguous. For big mem_cgroup, vmalloc is better. For small ones, kmalloc is used. [akpm@linux-foundation.org: simplification] Signed-off-by:
-
Balbir Singh authored
This patch makes the memory controller more responsive on my desktop. 1. Set all cached pages as inactive. We were by default marking all pages as active, thus forcing us to go through two passes for reclaiming pages 2. Remove congestion_wait(), since we already have that logic in do_try_to_free_pages() Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
remove_list/add_list uses page_cgroup_zoneinfo() in it. So, it's called twice before and after lock. mz = page_cgroup_zoneinfo(); lock(); mz = page_cgroup_zoneinfo(); .... unlock(); And address of mz never changes. This is not good. This patch fixes this behavior. Signed-off-by:
-
Pavel Emelyanov authored
This is a very common requirement from people using the resource accounting facilities (not only memcgroup but also OpenVZ beancounters). They want to put the cgroup in an initial state without re-creating it. For example after re-configuring a group people want to observe how this new configuration fits the group needs without saving the previous failcnt value. Merge two resets into one mem_cgroup_reset() function to demonstrate how multiplexing work. Besides, I have plans to move the files, that correspond to res_counter to the res_counter.c file and somehow "import" them into controller. I don't know how to make it gracefully yet, but merging resets of max_usage and failcnt in one function will be there for sure. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Acked-by:
-
Pavel Emelyanov authored
These two files are essentially event callbacks. They do not care about the contents of the string, but only about the fact of the write itself. Signed-off-by:
-
Balbir Singh authored
Move the memory controller data structure page_cgroup to its own slab cache. It saves space on the system, allocations are not necessarily pushed to order of 2 and should provide performance benefits. Users who disable the memory controller can also double check that the memory controller is not allocating page_cgroup's. NOTE: Hugh Dickins brought up the issue of whether we want to mark page_cgroup as __GFP_MOVABLE or __GFP_RECLAIMABLE. I don't think there is an easy answer at the moment. page_cgroup's are associated with user pages, they can be reclaimed once the user page has been reclaimed, so it might make sense to mark them as __GFP_RECLAIMABLE. For now, I am leaving the marking to default values that the slab allocator uses. Signed-off-by:
-
Pavel Emelyanov authored
The resource counter is supposed to facilitate the resource accounting of arbitrary resource (and it already does this for memory controller). However, it is about to be used in other resources controllers (swap, kernel memory, networking, etc), so provide a doc describing how to work with it. This will eliminate all the possible future duplications in the appropriate controllers' docs. Fixed errors pointed out by Randy. [akpm@linux-foundation.org: fix documentation tpyo] Signed-off-by:
-
Pavel Emelyanov authored
This field is the maximal value of the usage one since the counter creation (or since the latest reset). To reset this to the usage value simply write anything to the appropriate cgroup file. Signed-off-by:
-
Balbir Singh authored
Remove the mem_cgroup member from mm_struct and instead adds an owner. This approach was suggested by Paul Menage. The advantage of this approach is that, once the mm->owner is known, using the subsystem id, the cgroup can be determined. It also allows several control groups that are virtually grouped by mm_struct, to exist independent of the memory controller i.e., without adding mem_cgroup's for each controller, to mm_struct. A new config option CONFIG_MM_OWNER is added and the memory resource controller selects this config option. This patch also adds cgroup callbacks to notify subsystems when mm->owner changes. The mm_cgroup_changed callback is called with the task_lock() of the new task held and is called just prior to changing the mm->owner. I am indebted to Paul Menage for the several reviews of this patchset and helping me make it lighter and simpler. This patch was tested on a powerpc box, it was compiled with both the MM_OWNER config turned on and off. After the thread group leader exits, it's moved to init_css_state by cgroup_exit(), thus all future charges from runnings threads would be redirected to the init_css_set's subsystem. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Reviewed-by:
-
Serge E. Hallyn authored
Introduce a read_seq() helper in cftype, which uses seq_file to print out lists. Use it in the devices cgroup. Also split devices.allow into two files, so now devices.deny and devices.allow are the ones to use to manipulate the whitelist, while devices.list outputs the cgroup's current whitelist. Signed-off-by:
Serge E. Hallyn <serue@us.ibm.com> Acked-by:
-
Li Zefan authored
Now we can run through the hash table instead of running through the linked-list. Signed-off-by:
-
Li Zefan authored
We are at system boot and there is only 1 cgroup group (i,e, init_css_set), so we don't need to run through the css_set linked list. Neither do we need to run through the task list, since no processes have been created yet. Also referring to a comment in cgroup.h: struct css_set { ... /* * Set of subsystem states, one for each subsystem. This array * is immutable after creation apart from the init_css_set * during subsystem registration (at boot time). */ struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT]; } Signed-off-by: -
Li Zefan authored
When we attach a process to a different cgroup, the css_set linked-list will be run through to find a suitable existing css_set to use. This patch implements a hash table for better performance. The following benchmarks have been tested: For N in 1, 5, 10, 50, 100, 500, 1000, create N cgroups with one sleeping task in each, and then move an additional task through each cgroup in turn. Here is a test result: N Loop orig - Time(s) hash - Time(s) ---------------------------------------------- 1 10000 1.201231728 1.196311177 5 2000 1.065743872 1.040566424 10 1000 0.991054735 0.986876440 50 200 0.976554203 0.969608733 100 100 0.998504680 0.969218270 500 20 1.157347764 0.962602963 1000 10 1.619521852 1.085140172 Signed-off-by:
-
Serge E. Hallyn authored
Implement a cgroup to track and enforce open and mknod restrictions on device files. A device cgroup associates a device access whitelist with each cgroup. A whitelist entry has 4 fields. 'type' is a (all), c (char), or b (block). 'all' means it applies to all types and all major and minor numbers. Major and minor are either an integer or * for all. Access is a composition of r (read), w (write), and m (mknod). The root device cgroup starts with rwm to 'all'. A child devcg gets a copy of the parent. Admins can then remove devices from the whitelist or add new entries. A child cgroup can never receive a device access which is denied its parent. However when a device access is removed from a parent it will not also be removed from the child(ren). An entry is added using devices.allow, and removed using devices.deny. For instance echo 'c 1:3 mr' > /cgroups/1/devices.allow allows cgroup 1 to read and mknod the device usually known as /dev/null. Doing echo a > /cgroups/1/devices.deny will remove the default 'a *:* mrw' entry. CAP_SYS_ADMIN is needed to change permissions or move another task to a new cgroup. A cgroup may not be granted more permissions than the cgroup's parent has. Any task can move itself between cgroups. This won't be sufficient, but we can decide the best way to adequately restrict movement later. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix may-be-used-uninitialized warning] Signed-off-by:
James Morris <jmorris@namei.org> Looks-good-to: Pavel Emelyanov <xemul@openvz.org> Cc: Daniel Hokka Zakrisson <daniel@hozac.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Pavel Emelyanov authored
Trigger callback can be used to receive a kick-up from the user space. The string written is ignored. The cftype->private is used for multiplexing events. Signed-off-by:
-
Li Zefan authored
There is a race between create_proc_entry() and the assignment of file ops. proc_create() is invented to fix it. Signed-off-by:
-
Li Zefan authored
It is called by cgroup_init() and cgroup_init_early() only, which are annotated with __init. Signed-off-by:
-
Paul Menage authored
This removes some filesystem boilerplate from the CFS cgroup subsystem. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Paul Menage authored
These patches add cgroups read_s64 and write_s64 control file methods (the signed equivalent of read_u64/write_u64) and use them to implement the cpu.rt_runtime_us control file in the CFS cgroup subsystem. This patch: These are the signed equivalents of the read_u64/write_u64 methods Signed-off-by:
-
Paul Menage authored
The cgroup debug subsystem isn't generally useful for users. It should default to "n". Signed-off-by:
-
Paul Menage authored
The "releasable" control file provided by the cgroup framework exports the state of a per-cgroup flag that's related to the notify-on-release feature. This isn't really generally useful, unless you're trying to debug this particular feature of cgroups. This patch moves the "releasable" file to the cgroup_debug subsystem. Signed-off-by:
-
Paul Menage authored
This function isn't needed - a NULL pointer in the cftype read function will result in the same EINVAL response to userspace. Signed-off-by:
-
Paul Menage authored
Remove the seq_file boilerplate used to construct the memcontrol stats map, and instead use the new map representation for cgroup control files Signed-off-by:
-
Paul Menage authored
Adds a new type of supported control file representation, a map from strings to u64 values. Each map entry is printed as a line in a similar format to /proc/vmstat, i.e. "$key $value\n" Signed-off-by:
-
Paul Menage authored
Many of the cpusets control files are simple integer values, which don't require the overhead of memory allocations for reads and writes. Move the handlers for these control files into cpuset_read_u64() and cpuset_write_u64(). [akpm@linux-foundation.org: ad dmissing `break'] Signed-off-by:
-
Paul Menage authored
This removes the need for people to remember to pass the -n flag to echo when writing values to cgroup control files. Signed-off-by:
-
Paul Menage authored
Update the memory controller to use read_u64 for its limit/usage/failcnt control files, calling the new res_counter_read_u64() function. Signed-off-by:
-
Paul Menage authored
Adds a function for returning the value of a resource counter member, in a form suitable for use in a cgroup read_u64 control file method. Signed-off-by:
-
