- 22 Oct, 2017 40 commits
-
-
David S. Miller authored
Lawrence Brakmo says: ==================== bpf: add support for BASE_RTT This patch set adds the following functionality to socket_ops BPF programs. 1) Add bpf helper function bpf_getsocketops. Currently only supports TCP_CONGESTION 2) Add BPF_SOCKET_OPS_BASE_RTT op to get the base RTT of the connection. In general, the base RTT indicates the threshold such that RTTs above it indicate congestion. More details in the relevant patches. Consists of the following patches: [PATCH net-next 1/5] bpf: add support for BPF_SOCK_OPS_BASE_RTT [PATCH net-next 2/5] bpf: Adding helper function bpf_getsockops [PATCH net-next 3/5] bpf: Add BPF_SOCKET_OPS_BASE_RTT support to [PATCH net-next 4/5] bpf: sample BPF_SOCKET_OPS_BASE_RTT program [PATCH net-next 5/5] bpf: create samples/bpf/tcp_bpf.readme ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Lawrence Brakmo authored
Readme file explaining how to create a cgroupv2 and attach one of the tcp_*_kern.o socket_ops BPF program. Signed-off-by:
Lawrence Brakmo <brakmo@fb.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked_by: Alexei Starovoitov <ast@fb.com> Signed-off-by:
-
Lawrence Brakmo authored
Sample socket_ops BPF program to test the BPF helper function bpf_getsocketops and the new socket_ops op BPF_SOCKET_OPS_BASE_RTT. The program provides a base RTT of 80us when the calling flow is within a DC (as determined by the IPV6 prefix) and the congestion algorithm is "nv". Signed-off-by:
-
Lawrence Brakmo authored
TCP_NV will try to get the base RTT from a socket_ops BPF program if one is loaded. NV will then use the base RTT to bound its min RTT (its notion of the base RTT). It uses the base RTT as an upper bound and 80% of the base RTT as its lower bound. In other words, NV will consider filtered RTTs larger than base RTT as a sign of congestion. As a result, there is no minRTT inflation when there is a lot of congestion. For example, in a DC where the RTTs are less than 40us when there is no congestion, a base RTT value of 80us improves the performance of NV. The difference between the uncongested RTT and the base RTT provided represents how much queueing we are willing to have (in practice it can be higher). NV has been tunned to reduce congestion when there are many flows at the cost of one flow not achieving full bandwith utilization. When a reasonable base RTT is provided, one NV flow can now fully utilize the full bandwidth. In addition, the performance is also improved when there are many flows. In the following examples the NV results are using a kernel with this patch set (i.e. both NV results are using the new nv_loss_dec_factor). With one host sending to another host and only one flow the goodputs are: Cubic: 9.3 Gbps, NV: 5.5 Gbps, NV (baseRTT=80us): 9.2 Gbps With 2 hosts sending to one host (1 flow per host, the goodput per flow is: Cubic: 4.6 Gbps, NV: 4.5 Gbps, NV (baseRTT=80us)L 4.6 Gbps But the RTTs seen by a ping process in the sender is: Cubic: 3.3ms NV: 97us, NV (baseRTT=80us): 146us With a lot of flows things look even better for NV with baseRTT. Here we have 3 hosts sending to one host. Each sending host has 6 flows: 1 stream, 4x1MB RPC, 1x10KB RPC. Cubic, NV and NV with baseRTT all fully utilize the full available bandwidth. However, the distribution of bandwidth among the flows is very different. For the 10KB RPC flow: Cubic: 27Mbps, NV: 111Mbps, NV (baseRTT=80us): 222Mbps The 99% latencies for the 10KB flows are: Cubic: 26ms, NV: 1ms, NV (baseRTT=80us): 500us The RTT seen by a ping process at the senders: Cubic: 3.2ms NV: 720us, NV (baseRTT=80us): 330us Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Lawrence Brakmo authored
Adding support for helper function bpf_getsockops to socket_ops BPF programs. This patch only supports TCP_CONGESTION. Signed-off-by:
Vlad Vysotsky <vlad@cs.ucla.edu> Acked-by:
Alexei Starovoitov <ast@fb.com> Acked-by:
-
Lawrence Brakmo authored
A congestion control algorithm can make a call to the BPF socket_ops program to request the base RTT. The base RTT can be congestion control dependent and is meant to represent a congestion threshold such that RTTs above it indicate congestion. This is especially useful for flows within a DC where the base RTT is easy to obtain. Being provided a base RTT solves a basic problem in RTT based congestion avoidance algorithms (such as Vegas, NV and BBR). Although it is easy to get the base RTT when the network is not congested, it is very diffcult to do when it is very congested. Newer connections get an inflated value of the base RTT leading to unfariness (newer flows with a larger base RTT get more bandwidth). As a result, RTT based congestion avoidance algorithms tend to update their base RTTs to improve fairness. In very congested networks this can lead to base RTT inflation, reducing the ability of these RTT based congestion control algorithms to prevent congestion. Note that in my experiments with TCP-NV, the base RTT provided can be much larger than the actual hardware RTT. For example, experimenting with hosts within a rack where the hardware RTT is 16-20us, I've used base RTTs up to 150us. The effect of using a larger base RTT is that the congestion avoidance algorithm will allow more queueing. When there are only a few flows the main effect is larger measured RTTs and RPC latencies due to the increased queueing. When there are a lot of flows, a larger base RTT can lead to more congestion and more packet drops. For this case, where the hardware RTT is 20us, a base RTT of 80us produces good results. This patch only introduces BPF_SOCK_OPS_BASE_RTT, a later patch in this set adds support for using it in TCP-NV. Further study and testing is needed before support can be added to other delay based congestion avoidance algorithms. Signed-off-by:
-
Pieter Jansen van Vuuren authored
Use direct access struct fields rather than PREP_FIELD() macros to manipulate the jump ID and length, both of which are exactly 8-bits wide. This simplifies the code somewhat. Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Stefano Brivio authored
No need to re-invent memchr_inv() with !is_all_zero(). While at it, replace conditional and return clauses with a single return clause in is_tnl_info_zero(). Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
David S. Miller authored
Egil Hjelmeland says: ==================== net: dsa: lan9303: Add fdb/mdb methods This series add support for accessing and managing the lan9303 ALR (Address Logic Resolution). The first patch add low level functions for accessing the ALR, along with port_fast_age and port_fdb_dump methods. The second patch add functions for managing ALR entires, along with remaining fdb/mdb methods. Note that to complete STP support, a special ALR entry with the STP eth address must be added too. This must be addressed later. Comments welcome! Changes v2 -> v3: - Whitespace polishing. Removed some "section" comments. - Prefixed ALR constants with LAN9303_ for consistency. - Patch 2: lan9303_port_fast_age() wrap the "port" into a struct for passing as context to alr_loop_cb_del_port_learned. Safer in event of type change. - Patch 2: Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Changes v1 -> v2: - Patch 2: Removed question comment ==================== Signed-off-by: -
Egil Hjelmeland authored
Add functions for managing the lan9303 ALR (Address Logic Resolution). Implement DSA methods: port_fdb_add, port_fdb_del, port_mdb_prepare, port_mdb_add and port_mdb_del. Since the lan9303 do not offer reading specific ALR entry, the driver caches all static entries - in a flat table. Signed-off-by:
Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Egil Hjelmeland authored
Add DSA method port_fast_age as a step to STP support. Add low level functions for accessing the lan9303 ALR (Address Logic Resolution). Added DSA method port_fdb_dump Signed-off-by:
-
Jon Maloy authored
The function tipc_sk_timeout() is more complex than necessary, and even seems to contain an undetected bug. At one of the occurences where we renew the timer we just order it with (HZ / 20), instead of (jiffies + HZ / 20); In this commit we clean up the function. Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
David S. Miller authored
Elena Reshetova says: ==================== networking drivers refcount_t conversions Note: these are the last patches related to networking that perform conversion of refcounters from atomic_t to refcount_t. In contrast to the core network refcounter conversions that were merged earlier, these are much more straightforward ones. This series, for various networking drivers, replaces atomic_t reference counters with the new refcount_t type and API (see include/linux/refcount.h). By doing this we prevent intentional or accidental underflows or overflows that can led to use-after-free vulnerabilities. The patches are fully independent and can be cherry-picked separately. Patches are based on top of net-next. If there are no objections to the patches, please merge them via respective trees ==================== Signed-off-by: -
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable cn_callback_entry.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
David Windsor <dwindsor@gmail.com> Reviewed-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable syncppp.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable ppp_file.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable asyncppp.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_tx_sa.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_rx_sc.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_rx_sa.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable sixpack.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable fs_node.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mlx5_cq.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mlx4_srq.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mlx4_qp.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mlx4_cq.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mtk_eth.dma_refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable clip_entry.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
David S. Miller authored
Yunsheng Lin says: ==================== Add mac loopback selftest support in hns3 driver This patchset refactors the skb receiving and transmitting function before adding mac loopback selftest support in hns3 driver. ==================== Signed-off-by: -
Yunsheng Lin authored
This patch adds mac loopback selftest support for ethtool cmd by checking if a transmitted packet can be received correctly when mac loopback is enabled. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
This patch refactors the skb receiving and transmitting functions and export them in order to support the ethtool's mac loopback selftest. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== tools: bpftool: add a "version" command, and fix several items Quentin says: The first seven patches of this series bring several minor fixes to bpftool. Please see individual commit logs for details. Last patch adds a "version" commands to bpftool, which is in fact the version of the kernel from which it was compiled. ==================== Signed-off-by: -
Quentin Monnet authored
This command can be used to print the version of the tool, which is in fact the version from Linux taken from usr/include/linux/version.h. Example usage: $ bpftool version bpftool v4.14.0 Signed-off-by:Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
-
Quentin Monnet authored
For the `bpftool prog dump { jited | xlated } ...` command, adding `opcodes` keyword (to request opcodes to be printed) will have no effect if `file FILE` (to write binary output to FILE) is provided. The manual page and the help message to be displayed in the terminal should reflect that, and indicate that these options should be mutually exclusive. Signed-off-by: -
Quentin Monnet authored
The eBPF instruction permitting to load double words (8 bytes) into a register need 8-byte long "immediate" field, and thus occupy twice the space of other instructions. bpftool was aware of this and would increment the instruction counter only once on meeting such instruction, but it would only print the first four bytes of the immediate value to load. Make it able to dump the whole 16 byte-long double instruction instead (as would `llvm-objdump -d <program>`). Signed-off-by:
-
Quentin Monnet authored
Make error messages more consistent. Specifically, when bpftool fails at parsing map key bytes, make it print a single error message to stderr and return from the function, instead of (always) printing a second error message afterwards. Signed-off-by:
-
Quentin Monnet authored
Make error messages and return codes more consistent. Specifically, make `bpftool prog help` a real command, instead of printing usage by default for a non-recognized "help" command. Output is the same, but this makes bpftool return with a success value instead of an error. Signed-off-by:
-
Quentin Monnet authored
Make error messages and return codes more consistent. Specifically, replace the use of info() macro with err() when too many eBPF instructions are received to be dumped, given that bpftool returns with a non-null exit value in that case. Signed-off-by:
-
