1. 06 Feb, 2017 2 commits
    • Lorenzo Pieralisi's avatar
      ACPI/IORT: Fix iort_node_get_id() mapping entries indexing · 030abd8a
      Lorenzo Pieralisi authored
      Commit 618f535a ("ACPI/IORT: Add single mapping function")
      introduced a function (iort_node_get_id()) to retrieve ids for IORT
      named components.
      
      The iort_node_get_id() takes an index as input to refer to a specific
      mapping entry in the named component IORT node mapping array.
      
      For a mapping entry at a given index, iort_node_get_id() should return
      the id value (through the id_out function parameter) and the IORT node
      output_reference (through function return value) the given mapping entry
      refers to.
      
      Technically output_reference values may differ for different map
      entries, (see diagram below - mapped id values may refer to different eg
      IORT SMMU nodes; the kernel may not be able to handle different
      output_reference values for a given named component but the IORT kernel
      layer should still report the IORT mappings as reported by firmware) but
      current code in iort_node_get_id() fails to use the index function
      parameter to return the correct output_reference value (ie it always
      returns the output_reference value of the first entry in the mapping
      array whilst using the index correctly to retrieve the id value from the
      respective entry).
      
      	|----------------------|
      	|     named component  |
      	|----------------------|
      	|      map entry[0]    |
      	|----------------------|
      	|       id value       |
      	| output_reference----------------> eg SMMU 1
      	|----------------------|
      	|      map entry[1]    |
      	|----------------------|
      	|       id value       |
      	| output_reference----------------> eg SMMU 2
      	|----------------------|
      		    .
      		    .
      		    .
      	|----------------------|
      	|      map entry[N]    |
      	|----------------------|
      	|       id value       |
      	| output_reference----------------> eg SMMU 1
      	|----------------------|
      
      Consequently the iort_node_get_id() function always returns the IORT
      node pointed at by the output_reference value of the first named
      component mapping array entry, irrespective of the index parameter,
      which is a bug.
      
      Update the map array entry pointer computation in iort_node_get_id() to
      take into account the index value, fixing the issue.
      
      Fixes: 618f535a ("ACPI/IORT: Add single mapping function")
      Reported-by: default avatarHanjun Guo <hanjun.guo@linaro.org>
      Reviewed-by: default avatarHanjun Guo <hanjun.guo@linaro.org>
      Signed-off-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Cc: Hanjun Guo <hanjun.guo@linaro.org>
      Cc: Sinan Kaya <okaya@codeaurora.org>
      Cc: Tomasz Nowicki <tn@semihalf.com>
      Cc: Nate Watterson <nwatters@codeaurora.org>
      Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      030abd8a
    • Ard Biesheuvel's avatar
      arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA · 6d526ee2
      Ard Biesheuvel authored
      The NUMA code may get confused by the presence of NOMAP regions within
      zones, resulting in spurious BUG() checks where the node id deviates
      from the containing zone's node id.
      
      Since the kernel has no business reasoning about node ids of pages it
      does not own in the first place, enable CONFIG_HOLES_IN_ZONE to ensure
      that such pages are disregarded.
      Acked-by: default avatarRobert Richter <rrichter@cavium.com>
      Signed-off-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      6d526ee2
  2. 03 Feb, 2017 5 commits
  3. 02 Feb, 2017 4 commits
  4. 01 Feb, 2017 1 commit
    • Christopher Covington's avatar
      arm64: Work around Falkor erratum 1009 · d9ff80f8
      Christopher Covington authored
      During a TLB invalidate sequence targeting the inner shareable domain,
      Falkor may prematurely complete the DSB before all loads and stores using
      the old translation are observed. Instruction fetches are not subject to
      the conditions of this erratum. If the original code sequence includes
      multiple TLB invalidate instructions followed by a single DSB, onle one of
      the TLB instructions needs to be repeated to work around this erratum.
      While the erratum only applies to cases in which the TLBI specifies the
      inner-shareable domain (*IS form of TLBI) and the DSB is ISH form or
      stronger (OSH, SYS), this changes applies the workaround overabundantly--
      to local TLBI, DSB NSH sequences as well--for simplicity.
      
      Based on work by Shanker Donthineni <shankerd@codeaurora.org>
      Signed-off-by: default avatarChristopher Covington <cov@codeaurora.org>
      Acked-by: default avatarMark Rutland <mark.rutland@arm.com>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      d9ff80f8
  5. 31 Jan, 2017 1 commit
    • Catalin Marinas's avatar
      arm64: Improve detection of user/non-user mappings in set_pte(_at) · ec663d96
      Catalin Marinas authored
      Commit cab15ce6 ("arm64: Introduce execute-only page access
      permissions") allowed a valid user PTE to have the PTE_USER bit clear.
      As a consequence, the pte_valid_not_user() macro in set_pte() was
      replaced with pte_valid_global() under the assumption that only user
      pages have the nG bit set. EFI mappings, however, also have the nG bit
      set and set_pte() wrongly ignores issuing the DSB+ISB.
      
      This patch reinstates the pte_valid_not_user() macro and adds the
      PTE_UXN bit check since all kernel mappings have this bit set. For
      clarity, pte_exec() is renamed to pte_user_exec() as it only checks for
      the absence of PTE_UXN. Consequently, the user executable check in
      set_pte_at() drops the pte_ng() test since pte_user_exec() is
      sufficient.
      
      Fixes: cab15ce6 ("arm64: Introduce execute-only page access permissions")
      Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      ec663d96
  6. 27 Jan, 2017 3 commits
  7. 26 Jan, 2017 5 commits
  8. 23 Jan, 2017 1 commit
  9. 17 Jan, 2017 5 commits
    • Mark Rutland's avatar
      arm64: entry-ftrace.S: avoid open-coded {adr,ldr}_l · 829d2bd1
      Mark Rutland authored
      Some places in the kernel open-code sequences using ADRP for a symbol
      another instruction using a :lo12: relocation for that same symbol.
      These sequences are easy to get wrong, and more painful to read than is
      necessary. For these reasons, it is preferable to use the
      {adr,ldr,str}_l macros for these cases.
      
      This patch makes use of these in entry-ftrace.S, removing open-coded
      sequences using adrp. This results in a minor code change, since a
      temporary register is not used when generating the address for some
      symbols, but this is fine, as the value of the temporary register is not
      used elsewhere.
      Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
      Reviewed-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      829d2bd1
    • Mark Rutland's avatar
      arm64: efi-entry.S: avoid open-coded adr_l · 526d10ae
      Mark Rutland authored
      Some places in the kernel open-code sequences using ADRP for a symbol
      another instruction using a :lo12: relocation for that same symbol.
      These sequences are easy to get wrong, and more painful to read than is
      necessary. For these reasons, it is preferable to use the
      {adr,ldr,str}_l macros for these cases.
      
      This patch makes use of these in efi-entry.S, removing open-coded
      sequences using adrp.
      Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
      Reviewed-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Matt Fleming <matt@codeblueprint.co.uk>
      Cc: Will Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      526d10ae
    • Mark Rutland's avatar
      arm64: head.S: avoid open-coded adr_l · 9bb00360
      Mark Rutland authored
      Some places in the kernel open-code sequences using ADRP for a symbol
      another instruction using a :lo12: relocation for that same symbol.
      These sequences are easy to get wrong, and more painful to read than is
      necessary. For these reasons, it is preferable to use the
      {adr,ldr,str}_l macros for these cases.
      
      This patch makes use of adr_l these in head.S, removing an open-coded
      sequence using adrp.
      Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
      Reviewed-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Marc Zyngier <marc.zyngier@arm.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      9bb00360
    • Sudeep Holla's avatar
      arm64: cacheinfo: add support to override cache levels via device tree · 9a802431
      Sudeep Holla authored
      The cache hierarchy can be identified through Cache Level ID(CLIDR)
      architected system register. However in some cases it will provide
      only the number of cache levels that are integrated into the processor
      itself. In other words, it can't provide any information about the
      caches that are external and/or transparent.
      
      Some platforms require to export the information about all such external
      caches to the userspace applications via the sysfs interface.
      
      This patch adds support to override the cache levels using device tree
      to take such external non-architected caches into account.
      
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Mark Rutland <mark.rutland@arm.com>
      Tested-by: default avatarTan Xiaojun <tanxiaojun@huawei.com>
      Signed-off-by: default avatarSudeep Holla <sudeep.holla@arm.com>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      9a802431
    • Sudeep Holla's avatar
      of: base: add support to find the level of the last cache · 5fa23530
      Sudeep Holla authored
      It is useful to have helper function just to get the number of cache
      levels for a given logical cpu. We can obtain the same by just checking
      the level at which the last cache is present. This patch adds support
      to find the level of the last cache for a given cpu.
      
      It will be used on ARM64 platform where the device tree provides the
      information for the additional non-architected/transparent/external
      last level caches that are not integrated with the processors.
      
      Cc: Mark Rutland <mark.rutland@arm.com>
      Suggested-by: default avatarRob Herring <robh+dt@kernel.org>
      Acked-by: default avatarRob Herring <robh+dt@kernel.org>
      Tested-by: default avatarTan Xiaojun <tanxiaojun@huawei.com>
      Signed-off-by: default avatarSudeep Holla <sudeep.holla@arm.com>
      [will: use u32 instead of int for cache_level]
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      5fa23530
  10. 13 Jan, 2017 2 commits
  11. 12 Jan, 2017 9 commits
  12. 11 Jan, 2017 2 commits