When looking at the TC selftest reports, I noticed one test was failing
because /proc/net/nf_conntrack was not available.

  not ok 373 3992 - Add ct action triggering DNAT tuple conflict
  	Could not match regex pattern. Verify command output:
  cat: /proc/net/nf_conntrack: No such file or directory

It is only available if NF_CONNTRACK_PROCFS kconfig is set. So the issue
can be fixed simply by adding it to the list of required kconfig.

Fixes: e4690564 ("tc-testing: add test for ct DNAT tuple collision")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [1]
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-3-1eb4fd3a96e7@tessares.netAcked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When looking for something else in LKFT reports [1], I noticed most of
the tests were skipped because the "teardown stage" did not complete
successfully.

Pedro found out this is due to the fact CONFIG_NF_FLOW_TABLE is required
but not listed in the 'config' file. Adding it to the list fixes the
issues on LKFT side. CONFIG_NET_ACT_CT is now set to 'm' in the final
kconfig.

Fixes: c34b961a ("net/sched: act_ct: Create nf flow table per zone")
Cc: stable@vger.kernel.org
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1]
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [2]
Suggested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-2-1eb4fd3a96e7@tessares.netAcked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When looking for something else in LKFT reports [1], I noticed that the
TC selftest ended with a timeout error:

  not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds

The timeout had been introduced 3 years ago, see the Fixes commit below.

This timeout is only in place when executing the selftests via the
kselftests runner scripts. I guess this is not what most TC devs are
using and nobody noticed the issue before.

The new timeout is set to 15 minutes as suggested by Pedro [2]. It looks
like it is plenty more time than what it takes in "normal" conditions.

Fixes: 852c8cbf ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Cc: stable@vger.kernel.org
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1]
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [2]
Suggested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-1-1eb4fd3a96e7@tessares.netAcked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Current driver enables backpressure for LBK interfaces.
But these interfaces do not support this feature.
Hence, this patch fixes the issue by skipping the
backpressure configuration for these interfaces.

Fixes: 75f36270 ("octeontx2-pf: Support to enable/disable pause frames via ethtool").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20230716093741.28063-1-gakula@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Cited commit converted the neighbour code to use the standard RCU
variant instead of the RCU-bh variant, but the VRF code still uses
rcu_read_lock_bh() / rcu_read_unlock_bh() around the neighbour lookup
code in its IPv4 and IPv6 output paths, resulting in lockdep splats
[1][2]. Can be reproduced using [3].

Fix by switching to rcu_read_lock() / rcu_read_unlock().

[1]
=============================
WARNING: suspicious RCU usage
6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted
-----------------------------
include/net/neighbour.h:302 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by ping/183:
 #0: ffff888105ea1d80 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0xc6c/0x33c0
 #1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output+0x2e3/0x2030

stack backtrace:
CPU: 0 PID: 183 Comm: ping Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0xc1/0xf0
 lockdep_rcu_suspicious+0x211/0x3b0
 vrf_output+0x1380/0x2030
 ip_push_pending_frames+0x125/0x2a0
 raw_sendmsg+0x200d/0x33c0
 inet_sendmsg+0xa2/0xe0
 __sys_sendto+0x2aa/0x420
 __x64_sys_sendto+0xe5/0x1c0
 do_syscall_64+0x38/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

[2]
=============================
WARNING: suspicious RCU usage
6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted
-----------------------------
include/net/neighbour.h:302 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by ping6/182:
 #0: ffff888114b63000 (sk_lock-AF_INET6){+.+.}-{0:0}, at: rawv6_sendmsg+0x1602/0x3e50
 #1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output6+0xe9/0x1310

stack backtrace:
CPU: 0 PID: 182 Comm: ping6 Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0xc1/0xf0
 lockdep_rcu_suspicious+0x211/0x3b0
 vrf_output6+0xd32/0x1310
 ip6_local_out+0xb4/0x1a0
 ip6_send_skb+0xbc/0x340
 ip6_push_pending_frames+0xe5/0x110
 rawv6_sendmsg+0x2e6e/0x3e50
 inet_sendmsg+0xa2/0xe0
 __sys_sendto+0x2aa/0x420
 __x64_sys_sendto+0xe5/0x1c0
 do_syscall_64+0x38/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

[3]
#!/bin/bash

ip link add name vrf-red up numtxqueues 2 type vrf table 10
ip link add name swp1 up master vrf-red type dummy
ip address add 192.0.2.1/24 dev swp1
ip address add 2001:db8:1::1/64 dev swp1
ip neigh add 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm dev swp1
ip neigh add 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm dev swp1
ip vrf exec vrf-red ping 192.0.2.2 -c 1 &> /dev/null
ip vrf exec vrf-red ping6 2001:db8:1::2 -c 1 &> /dev/null

Fixes: 09eed119 ("neighbour: switch to standard rcu, instead of rcu_bh")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/netdev/CA+G9fYtEr-=GbcXNDYo3XOkwR+uYgehVoDjsP0pFLUpZ_AZcyg@mail.gmail.com/Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230715153605.4068066-1-idosch@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-07-14 (ice)

This series contains updates to ice driver only.

Petr Oros removes multiple calls made to unregister netdev and
devlink_port.

Michal fixes null pointer dereference that can occur during reload.
====================

Link: https://lore.kernel.org/r/20230714201041.1717834-1-anthony.l.nguyen@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Referenced commit missed that for chip versions 42 and 43 ASPM
remained disabled in the respective rtl_hw_start_...() routines.
This resulted in problems as described in the referenced bug
ticket. Therefore re-instantiate the previous logic.

Fixes: 5fc3f6c9 ("r8169: consolidate disabling ASPM before EPHY access")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217635Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The KSZ8795 driver code was modified to use on KSZ8863/73, which has
different register definitions.  Some of the new KSZ8795 register
information are wrong compared to previous code.

KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID
and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading
than writing.  To compensate that a special code was added to shift the
register value by 1 before applying those bits.  This is wrong when the
code is running on KSZ8863, so this special code is only executed when
KSZ8795 is detected.

Fixes: 4b20a07e ("net: dsa: microchip: ksz8795: add support for ksz88xx chips")
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Victor Nogueira says:

====================
net: sched: Fixes for classifiers

Four different classifiers (bpf, u32, matchall, and flower) are
calling tcf_bind_filter in their callbacks, but arent't undoing it by
calling tcf_unbind_filter if their was an error after binding.

This patch set fixes all this by calling tcf_unbind_filter in such
cases.

This set also undoes a refcount decrement in cls_u32 when an update
fails under specific conditions which are described in patch #3.

v1 -> v2:
* Remove blank line after fixes tag
* Fix reverse xmas tree issues pointed out by Simon

v2 -> v3:
* Inline functions cls_bpf_set_parms and fl_set_parms to avoid adding
  yet another parameter (and a return value at it) to them.
* Remove similar fixes for u32 and matchall, which will be sent soon,
  once we find a way to do the fixes without adding a return parameter
  to their set_parms functions.

v3 -> v4:
* Inline mall_set_parms to avoid adding yet another parameter.
* Remove set_flags parameter from u32_set_parms and create a separate
  function for calling tcf_bind_filter and tcf_unbind_filter in case of
  failure.
* Change cover letter title to also encompass refcnt fix for u32

v4 -> v5:
* Change back tag to net
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If TCA_FLOWER_CLASSID is specified in the netlink message, the code will
call tcf_bind_filter. However, if any error occurs after that, the code
should undo this by calling tcf_unbind_filter.

Fixes: 77b9900e ("tc: introduce Flower classifier")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If cls_bpf_offload errors out, we must also undo tcf_bind_filter that
was done before the error.

Fix that by calling tcf_unbind_filter in errout_parms.

Fixes: eadb4148 ("net: cls_bpf: add support for marking filters as hardware-only")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the case of an update, when TCA_U32_LINK is set, u32_set_parms will
decrement the refcount of the ht_down (struct tc_u_hnode) pointer
present in the older u32 filter which we are replacing. However, if
u32_replace_hw_knode errors out, the update command fails and that
ht_down pointer continues decremented. To fix that, when
u32_replace_hw_knode fails, check if ht_down's refcount was decremented
and undo the decrement.

Fixes: d34e3e18 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter
operation done at u32_set_parms.

Fixes: d34e3e18 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case an error occurred after mall_set_parms executed successfully, we
must undo the tcf_bind_filter call it issues.

Fix that by calling tcf_unbind_filter in err_replace_hw_filter label.

Fixes: ec2507d2 ("net/sched: cls_matchall: Fix error path")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Randy Dunlap says:

====================
net: fix kernel-doc problems in include/net/

Fix many (but not all) kernel-doc warnings in include/net/.

 [PATCH v2 net 1/9] net: bonding: remove kernel-doc comment marker
 [PATCH v2 net 2/9] net: cfg802154: fix kernel-doc notation warnings
 [PATCH v2 net 3/9] codel: fix kernel-doc notation warnings
 [PATCH v2 net 4/9] devlink: fix kernel-doc notation warnings
 [PATCH v2 net 5/9] inet: frags: remove kernel-doc comment marker
 [PATCH v2 net 6/9] net: llc: fix kernel-doc notation warnings
 [PATCH v2 net 7/9] net: NSH: fix kernel-doc notation warning
 [PATCH v2 net 8/9] pie: fix kernel-doc notation warning
 [PATCH v2 net 9/9] rsi: remove kernel-doc comment marker
====================

Link: https://lore.kernel.org/r/20230714045127.18752-1-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change an errant kernel-doc comment marker (/**) to a regular
comment to prevent a kernel-doc warning.

rsi_91x.h:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Copyright (c) 2017 Redpine Signals Inc.

Fixes: 4c10d56a ("rsi: add header file rsi_91x")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230714045127.18752-10-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Spell a struct member's name correctly to prevent a kernel-doc
warning.

pie.h:38: warning: Function parameter or member 'tupdate' not described in 'pie_params'

Fixes: b42a3d7c ("pie: improve comments and commenting style")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Leslie Monis <lesliemonis@gmail.com>
Cc: "Mohit P. Tahiliani" <tahiliani@nitk.edu.in>
Cc: Gautam Ramakrishnan <gautamramk@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/r/20230714045127.18752-9-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the struct member's name and the correct format to prevent a
kernel-doc warning.

nsh.h:200: warning: Function parameter or member 'context' not described in 'nsh_md1_ctx'

Fixes: 1f0b7744 ("net: add NSH header structures and helpers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Benc <jbenc@redhat.com>
Link: https://lore.kernel.org/r/20230714045127.18752-8-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the corrent function parameter name or format to prevent
kernel-doc warnings.
Add 2 function parameter descriptions to prevent kernel-doc warnings.

llc_pdu.h:278: warning: Function parameter or member 'da' not described in 'llc_pdu_decode_da'
llc_pdu.h:278: warning: Excess function parameter 'sa' description in 'llc_pdu_decode_da'
llc_pdu.h:330: warning: Function parameter or member 'skb' not described in 'llc_pdu_init_as_test_cmd'
llc_pdu.h:379: warning: Function parameter or member 'svcs_supported' not described in 'llc_pdu_init_as_xid_cmd'
llc_pdu.h:379: warning: Function parameter or member 'rx_window' not described in 'llc_pdu_init_as_xid_cmd'

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230714045127.18752-7-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Modify the anonymous enum kernel-doc content so that it doesn't cause
a kernel-doc warning.

inet_frag.h:33: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Fixes: 1ab1934e ("inet: frags: enum the flag definitions and add descriptions")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230714045127.18752-6-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Spell function or struct member names correctly.
Use ':' instead of '-' for struct member entries.
Mark one field as private in kernel-doc.
Add a few entries that were missing.
Fix a typo.

These changes prevent kernel-doc warnings:

devlink.h:252: warning: Function parameter or member 'field_id' not described in 'devlink_dpipe_match'
devlink.h:267: warning: Function parameter or member 'field_id' not described in 'devlink_dpipe_action'
devlink.h:310: warning: Function parameter or member 'match_values_count' not described in 'devlink_dpipe_entry'
devlink.h:355: warning: Function parameter or member 'list' not described in 'devlink_dpipe_table'
devlink.h:374: warning: Function parameter or member 'actions_dump' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'matches_dump' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'entries_dump' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'counters_set_update' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'size_get' not described in 'devlink_dpipe_table_ops'
devlink.h:384: warning: Function parameter or member 'headers' not described in 'devlink_dpipe_headers'
devlink.h:384: warning: Function parameter or member 'headers_count' not described in 'devlink_dpipe_headers'
devlink.h:398: warning: Function parameter or member 'unit' not described in 'devlink_resource_size_params'
devlink.h:487: warning: Function parameter or member 'id' not described in 'devlink_param'
devlink.h:645: warning: Function parameter or member 'overwrite_mask' not described in 'devlink_flash_update_params'

Fixes: 1555d204 ("devlink: Support for pipeline debug (dpipe)")
Fixes: d9f9b9a4 ("devlink: Add support for resource abstraction")
Fixes: eabaef18 ("devlink: Add devlink_param register and unregister")
Fixes: 5d5b4128 ("devlink: introduce flash update overwrite mask")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Moshe Shemesh <moshe@mellanox.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230714045127.18752-5-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use '@' before the struct member names in kernel-doc notation
to prevent kernel-doc warnings.

codel.h:158: warning: Function parameter or member 'ecn_mark' not described in 'codel_stats'
codel.h:158: warning: Function parameter or member 'ce_mark' not described in 'codel_stats'

Fixes: 76e3cc12 ("codel: Controlled Delay AQM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Dave Taht <dave.taht@bufferbloat.net>
Link: https://lore.kernel.org/r/20230714045127.18752-4-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add an enum heading to the kernel-doc comments to prevent
kernel-doc warnings.

cfg802154.h:174: warning: Cannot understand  * @WPAN_PHY_FLAG_TRANSMIT_POWER: Indicates that transceiver will support
 on line 174 - I thought it was a doc line

cfg802154.h:192: warning: Enum value 'WPAN_PHY_FLAG_TXPOWER' not described in enum 'wpan_phy_flags'
cfg802154.h:192: warning: Excess enum value 'WPAN_PHY_FLAG_TRANSMIT_POWER' description in 'wpan_phy_flags'

Fixes: edea8f7c ("cfg802154: introduce wpan phy flags")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230714045127.18752-3-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change an errant kernel-doc comment marker (/**) to a regular
comment to prevent a kernel-doc warning.

bonding.h:282: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Returns NULL if the net_device does not belong to any of the bond's slaves

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Link: https://lore.kernel.org/r/20230714045127.18752-2-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Calling ethtool during reload can lead to call trace, because VSI isn't
configured for some time, but netdev is alive.

To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors
to 0 after freeing and add a check for ::tx/rx_rings in ring related
ethtool ops.

Add proper unroll of filters in ice_start_eth().

Reproduction:
$watch -n 0.1 -d 'ethtool -g enp24s0f0np0'
$devlink dev reload pci/0000:18:00.0 action driver_reinit

Call trace before fix:
[66303.926205] BUG: kernel NULL pointer dereference, address: 0000000000000000
[66303.926259] #PF: supervisor read access in kernel mode
[66303.926286] #PF: error_code(0x0000) - not-present page
[66303.926311] PGD 0 P4D 0
[66303.926332] Oops: 0000 [#1] PREEMPT SMP PTI
[66303.926358] CPU: 4 PID: 933821 Comm: ethtool Kdump: loaded Tainted: G           OE      6.4.0-rc5+ #1
[66303.926400] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018
[66303.926446] RIP: 0010:ice_get_ringparam+0x22/0x50 [ice]
[66303.926649] Code: 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 87 c0 09 00 00 c7 46 04 e0 1f 00 00 c7 46 10 e0 1f 00 00 48 8b 50 20 <48> 8b 12 0f b7 52 3a 89 56 14 48 8b 40 28 48 8b 00 0f b7 40 58 48
[66303.926722] RSP: 0018:ffffad40472f39c8 EFLAGS: 00010246
[66303.926749] RAX: ffff98a8ada05828 RBX: ffff98a8c46dd060 RCX: ffffad40472f3b48
[66303.926781] RDX: 0000000000000000 RSI: ffff98a8c46dd068 RDI: ffff98a8b23c4000
[66303.926811] RBP: ffffad40472f3b48 R08: 00000000000337b0 R09: 0000000000000000
[66303.926843] R10: 0000000000000001 R11: 0000000000000100 R12: ffff98a8b23c4000
[66303.926874] R13: ffff98a8c46dd060 R14: 000000000000000f R15: ffffad40472f3a50
[66303.926906] FS:  00007f6397966740(0000) GS:ffff98b390900000(0000) knlGS:0000000000000000
[66303.926941] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[66303.926967] CR2: 0000000000000000 CR3: 000000011ac20002 CR4: 00000000007706e0
[66303.926999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[66303.927029] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[66303.927060] PKRU: 55555554
[66303.927075] Call Trace:
[66303.927094]  <TASK>
[66303.927111]  ? __die+0x23/0x70
[66303.927140]  ? page_fault_oops+0x171/0x4e0
[66303.927176]  ? exc_page_fault+0x7f/0x180
[66303.927209]  ? asm_exc_page_fault+0x26/0x30
[66303.927244]  ? ice_get_ringparam+0x22/0x50 [ice]
[66303.927433]  rings_prepare_data+0x62/0x80
[66303.927469]  ethnl_default_doit+0xe2/0x350
[66303.927501]  genl_family_rcv_msg_doit.isra.0+0xe3/0x140
[66303.927538]  genl_rcv_msg+0x1b1/0x2c0
[66303.927561]  ? __pfx_ethnl_default_doit+0x10/0x10
[66303.927590]  ? __pfx_genl_rcv_msg+0x10/0x10
[66303.927615]  netlink_rcv_skb+0x58/0x110
[66303.927644]  genl_rcv+0x28/0x40
[66303.927665]  netlink_unicast+0x19e/0x290
[66303.927691]  netlink_sendmsg+0x254/0x4d0
[66303.927717]  sock_sendmsg+0x93/0xa0
[66303.927743]  __sys_sendto+0x126/0x170
[66303.927780]  __x64_sys_sendto+0x24/0x30
[66303.928593]  do_syscall_64+0x5d/0x90
[66303.929370]  ? __count_memcg_events+0x60/0xa0
[66303.930146]  ? count_memcg_events.constprop.0+0x1a/0x30
[66303.930920]  ? handle_mm_fault+0x9e/0x350
[66303.931688]  ? do_user_addr_fault+0x258/0x740
[66303.932452]  ? exc_page_fault+0x7f/0x180
[66303.933193]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

Fixes: 5b246e53 ("ice: split probe into smaller functions")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Since commit 6624e780 ("ice: split ice_vsi_setup into smaller
functions") ice_vsi_release does things twice. There is unregister
netdev which is unregistered in ice_deinit_eth also.

It also unregisters the devlink_port twice which is also unregistered
in ice_deinit_eth(). This double deregistration is hidden because
devl_port_unregister ignores the return value of xa_erase.

[   68.642167] Call Trace:
[   68.650385]  ice_devlink_destroy_pf_port+0xe/0x20 [ice]
[   68.655656]  ice_vsi_release+0x445/0x690 [ice]
[   68.660147]  ice_deinit+0x99/0x280 [ice]
[   68.664117]  ice_remove+0x1b6/0x5c0 [ice]

[  171.103841] Call Trace:
[  171.109607]  ice_devlink_destroy_pf_port+0xf/0x20 [ice]
[  171.114841]  ice_remove+0x158/0x270 [ice]
[  171.118854]  pci_device_remove+0x3b/0xc0
[  171.122779]  device_release_driver_internal+0xc7/0x170
[  171.127912]  driver_detach+0x54/0x8c
[  171.131491]  bus_remove_driver+0x77/0xd1
[  171.135406]  pci_unregister_driver+0x2d/0xb0
[  171.139670]  ice_module_exit+0xc/0x55f [ice]

Fixes: 6624e780 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Commit 1fd54773 ("udp: allow header check for dodgy GSO_UDP_L4
packets.") checks DODGY bit for UDP, but for packets that can be fed
directly to the device after gso_segs reset, it actually falls through
to fragmentation:

https://lore.kernel.org/all/CAJPywTKDdjtwkLVUW6LRA2FU912qcDmQOQGt2WaDo28KzYDg+A@mail.gmail.com/

This change restores the expected behavior of GSO_UDP_L4 packets.

Fixes: 1fd54773 ("udp: allow header check for dodgy GSO_UDP_L4 packets.")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Identify issues that arise by using the tests/doublebitand.cocci
semantic patch. Need to remove duplicate expression in if statement.
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is expected that most callers should _ignore_ the errors return by
debugfs_create_dir() in bnad_debugfs_init().
Signed-off-by: Wang Ming <machel@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the call to of_get_ethdev_address to mtk_add_mac which is part of
the probe function and can hence itself return -EPROBE_DEFER should
of_get_ethdev_address return -EPROBE_DEFER. This allows us to entirely
get rid of the mtk_init function.

The problem of of_get_ethdev_address returning -EPROBE_DEFER surfaced
in situations in which the NVMEM provider holding the MAC address has
not yet be loaded at the time mtk_eth_soc is initially probed. In this
case probing of mtk_eth_soc should be deferred instead of falling back
to use a random MAC address, so once the NVMEM provider becomes
available probing can be repeated.

Fixes: 656e7052 ("net-next: mediatek: add support for MT7623 ethernet")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we create an L2 loop on a bridge in netns, we will see packets storm
even if STP is enabled.

  # unshare -n
  # ip link add br0 type bridge
  # ip link add veth0 type veth peer name veth1
  # ip link set veth0 master br0 up
  # ip link set veth1 master br0 up
  # ip link set br0 type bridge stp_state 1
  # ip link set br0 up
  # sleep 30
  # ip -s link show br0
  2: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
      link/ether b6:61:98:1c:1c:b5 brd ff:ff:ff:ff:ff:ff
      RX: bytes  packets  errors  dropped missed  mcast
      956553768  12861249 0       0       0       12861249  <-. Keep
      TX: bytes  packets  errors  dropped carrier collsns     |  increasing
      1027834    11951    0       0       0       0         <-'   rapidly

This is because llc_rcv() drops all packets in non-root netns and BPDU
is dropped.

Let's add extack warning when enabling STP in netns.

  # unshare -n
  # ip link add br0 type bridge
  # ip link set br0 type bridge stp_state 1
  Warning: bridge: STP does not work in non-root netns.

Note this commit will be reverted later when we namespacify the whole LLC
infra.

Fixes: e730c155 ("[NET]: Make packet reception network namespace safe")
Suggested-by: Harry Coin <hcoin@quietfountain.com>
Link: https://lore.kernel.org/netdev/0f531295-e289-022d-5add-5ceffa0df9bc@quietfountain.com/Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
field will be strictly contained within one word. However, this is not
guaranteed to be the case and it is possible for ALE field entries to span
across up to two words at the most.

Fix the methods to handle getting/setting fields spanning up to two words.

Fixes: db82173f ("netdev: driver: ethernet: add cpsw address lookup engine support")
Signed-off-by: Tanmay Patil <t-patil@ti.com>
[s-vadapalli@ti.com: rephrased commit message and added Fixes tag]
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The at9331 is only able to read or write a single register at once.  The
driver has a custom regmap bus and chooses to tell the regmap core about
this by reporting the maximum transfer sizes rather than the explicit
flags that exist at the regmap level.  Since there are a number of
problems with the raw transfer limits and the regmap level flags are
better integrated anyway convert the driver to use the flags.

No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The syzbot fuzzer identified a problem in the usbnet driver:

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 754 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 754 Comm: kworker/0:2 Not tainted 6.4.0-rc7-syzkaller-00014-g692b7dc8 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 2c b4 5b fb 48 8b 7c 24 18 e8 42 07 f0 fe 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 c9 fc 8a e8 5a 6f 23 fb <0f> 0b e9 58 f8 ff ff e8 fe b3 5b fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc9000463f568 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff88801eb28000 RSI: ffffffff814c03b7 RDI: 0000000000000001
RBP: ffff8881443b7190 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000003
R13: ffff88802a77cb18 R14: 0000000000000003 R15: ffff888018262500
FS:  0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556a99c15a18 CR3: 0000000028c71000 CR4: 0000000000350ef0
Call Trace:
 <TASK>
 usbnet_start_xmit+0xfe5/0x2190 drivers/net/usb/usbnet.c:1453
 __netdev_start_xmit include/linux/netdevice.h:4918 [inline]
 netdev_start_xmit include/linux/netdevice.h:4932 [inline]
 xmit_one net/core/dev.c:3578 [inline]
 dev_hard_start_xmit+0x187/0x700 net/core/dev.c:3594
...

This bug is caused by the fact that usbnet trusts the bulk endpoint
addresses its probe routine receives in the driver_info structure, and
it does not check to see that these endpoints actually exist and have
the expected type and directions.

The fix is simply to add such a check.

Reported-and-tested-by: syzbot+63ee658b9a100ffadbe2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/000000000000a56e9105d0cec021@google.com/Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/ea152b6d-44df-4f8a-95c6-4db51143dcc1@rowland.harvard.eduSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I get sporadic timeouts from the driver when using the
MV88E6352. Reading the status again after the loop fixes the
problem: the operation is successful but goes undetected.

Some added prints show things like this:

[   58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
    for switch, addr 1b reg 0b, mask 8000, val 0000, data c000
[   58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for
    ATU op 4000, fid 0001
(...)
[   61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
    for switch, addr 1c reg 18, mask 8000, val 0000, data 9860
[   61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting
    for PHY command 1860 to complete

The reason is probably not the commands: I think those are
mostly fine with the 50+50ms timeout, but the problem
appears when OpenWrt brings up several interfaces in
parallel on a system with 7 populated ports: if one of
them take more than 50 ms and waits one or more of the
others can get stuck on the mutex for the switch and then
this can easily multiply.

As we sleep and wait, the function loop needs a final
check after exiting the loop if we were successful.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Fixes: 35da1dfd ("net: dsa: mv88e6xxx: Improve performance of busy bit polling")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter, wireless and ebpf.

  Current release - regressions:

   - netfilter: conntrack: gre: don't set assured flag for clash entries

   - wifi: iwlwifi: remove 'use_tfh' config to fix crash

  Previous releases - regressions:

   - ipv6: fix a potential refcount underflow for idev

   - icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in
     icmp6_dev()

   - bpf: fix max stack depth check for async callbacks

   - eth: mlx5e:
      - check for NOT_READY flag state after locking
      - fix page_pool page fragment tracking for XDP

   - eth: igc:
      - fix tx hang issue when QBV gate is closed
      - fix corner cases for TSN offload

   - eth: octeontx2-af: Move validation of ptp pointer before its usage

   - eth: ena: fix shift-out-of-bounds in exponential backoff

  Previous releases - always broken:

   - core: prevent skb corruption on frag list segmentation

   - sched:
      - cls_fw: fix improper refcount update leads to use-after-free
      - sch_qfq: account for stab overhead in qfq_enqueue

   - netfilter:
      - report use refcount overflow
      - prevent OOB access in nft_byteorder_eval

   - wifi: mt7921e: fix init command fail with enabled device

   - eth: ocelot: fix oversize frame dropping for preemptible TCs

   - eth: fec: recycle pages for transmitted XDP frames"

* tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
  selftests: tc-testing: add test for qfq with stab overhead
  net/sched: sch_qfq: account for stab overhead in qfq_enqueue
  selftests: tc-testing: add tests for qfq mtu sanity check
  net/sched: sch_qfq: reintroduce lmax bound check for MTU
  wifi: cfg80211: fix receiving mesh packets without RFC1042 header
  wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()
  net: txgbe: fix eeprom calculation error
  net/sched: make psched_mtu() RTNL-less safe
  net: ena: fix shift-out-of-bounds in exponential backoff
  netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()
  net/sched: flower: Ensure both minimum and maximum ports are specified
  MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER
  docs: netdev: update the URL of the status page
  wifi: iwlwifi: remove 'use_tfh' config to fix crash
  xdp: use trusted arguments in XDP hints kfuncs
  bpf: cpumap: Fix memory leak in cpu_map_update_elem
  wifi: airo: avoid uninitialized warning in airo_get_rate()
  octeontx2-pf: Add additional check for MCAM rules
  net: dsa: Removed unneeded of_node_put in felix_parse_ports_node
  net: fec: use netdev_err_once() instead of netdev_err()
  ...

Pull tracing fixes from Steven Rostedt:

 - Fix some missing-prototype warnings

 - Fix user events struct args (did not include size of struct)

   When creating a user event, the "struct" keyword is to denote that
   the size of the field will be passed in. But the parsing failed to
   handle this case.

 - Add selftest to struct sizes for user events

 - Fix sample code for direct trampolines.

   The sample code for direct trampolines attached to handle_mm_fault().
   But the prototype changed and the direct trampoline sample code was
   not updated. Direct trampolines needs to have the arguments correct
   otherwise it can fail or crash the system.

 - Remove unused ftrace_regs_caller_ret() prototype.

 - Quiet false positive of FORTIFY_SOURCE

   Due to backward compatibility, the structure used to save stack
   traces in the kernel had a fixed size of 8. This structure is
   exported to user space via the tracing format file. A change was made
   to allow more than 8 functions to be recorded, and user space now
   uses the size field to know how many functions are actually in the
   stack.

   But the structure still has size of 8 (even though it points into the
   ring buffer that has the required amount allocated to hold a full
   stack.

   This was fine until the fortifier noticed that the
   memcpy(&entry->caller, stack, size) was greater than the 8 functions
   and would complain at runtime about it.

   Hide this by using a pointer to the stack location on the ring buffer
   instead of using the address of the entry structure caller field.

 - Fix a deadloop in reading trace_pipe that was caused by a mismatch
   between ring_buffer_empty() returning false which then asked to read
   the data, but the read code uses rb_num_of_entries() that returned
   zero, and causing a infinite "retry".

 - Fix a warning caused by not using all pages allocated to store ftrace
   functions, where this can happen if the linker inserts a bunch of
   "NULL" entries, causing the accounting of how many pages needed to be
   off.

 - Fix histogram synthetic event crashing when the start event is
   removed and the end event is still using a variable from it

 - Fix memory leak in freeing iter->temp in tracing_release_pipe()

* tag 'trace-v6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix memory leak of iter->temp when reading trace_pipe
  tracing/histograms: Add histograms to hist_vars if they have referenced variables
  tracing: Stop FORTIFY_SOURCE complaining about stack trace caller
  ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()
  ring-buffer: Fix deadloop issue on reading trace_pipe
  tracing: arm64: Avoid missing-prototype warnings
  selftests/user_events: Test struct size match cases
  tracing/user_events: Fix struct arg size match check
  x86/ftrace: Remove unsued extern declaration ftrace_regs_caller_ret()
  arm64: ftrace: Add direct call trampoline samples support
  samples: ftrace: Save required argument registers in sample trampolines

Pull xen fixes from Juergen Gross:

 - a cleanup of the Xen related ELF-notes

 - a fix for virtio handling in Xen dom0 when running Xen in a VM

* tag 'for-linus-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/virtio: Fix NULL deref when a bridge of PCI root bus has no parent
  x86/Xen: tidy xen-head.S

Pull sh fixes from John Paul Adrian Glaubitz:
 "The sh updates introduced multiple regressions.

  In particular, the change a8ac2961 ("sh: Avoid using IRQ0 on SH3
  and SH4") causes several boards to hang during boot due to incorrect
  IRQ numbers.

  Geert Uytterhoeven has contributed patches that handle the virq offset
  in the IRQ code for the dreamcast, highlander and r2d boards while
  Artur Rojek has contributed a patch which handles the virq offset for
  the hd64461 companion chip"

* tag 'sh-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ
  sh: mach-dreamcast: Handle virq offset in cascaded IRQ demux
  sh: mach-highlander: Handle virq offset in cascaded IRL demux
  sh: mach-r2d: Handle virq offset in cascaded IRL demux

kmemleak reports:
  unreferenced object 0xffff88814d14e200 (size 256):
    comm "cat", pid 336, jiffies 4294871818 (age 779.490s)
    hex dump (first 32 bytes):
      04 00 01 03 00 00 00 00 08 00 00 00 00 00 00 00  ................
      0c d8 c8 9b ff ff ff ff 04 5a ca 9b ff ff ff ff  .........Z......
    backtrace:
      [<ffffffff9bdff18f>] __kmalloc+0x4f/0x140
      [<ffffffff9bc9238b>] trace_find_next_entry+0xbb/0x1d0
      [<ffffffff9bc9caef>] trace_print_lat_context+0xaf/0x4e0
      [<ffffffff9bc94490>] print_trace_line+0x3e0/0x950
      [<ffffffff9bc95499>] tracing_read_pipe+0x2d9/0x5a0
      [<ffffffff9bf03a43>] vfs_read+0x143/0x520
      [<ffffffff9bf04c2d>] ksys_read+0xbd/0x160
      [<ffffffff9d0f0edf>] do_syscall_64+0x3f/0x90
      [<ffffffff9d2000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8

when reading file 'trace_pipe', 'iter->temp' is allocated or relocated
in trace_find_next_entry() but not freed before 'trace_pipe' is closed.

To fix it, free 'iter->temp' in tracing_release_pipe().

Link: https://lore.kernel.org/linux-trace-kernel/20230713141435.1133021-1-zhengyejian1@huawei.com

Cc: stable@vger.kernel.org
Fixes: ff895103 ("tracing: Save off entry when peeking at next entry")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>