The bindings for the CPU frequency scaling driver require a specific
compatible for the SoC. Add the compatible.

Fixes: 0c665213 ("arm64: dts: qcom: sdm670: add cpu frequency scaling")
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230816230412.76862-9-mailingradian@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Follow the example of other platforms and extend the PDC resource region
to 0x30000, so that the PDC driver can read the PDC_VERSION register.

Fixes: 397ad946 ("arm64: dts: qcom: sm8150: Add pdc interrupt controller node")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230929-topic-sm8x50-upstream-pdc-ver-v5-2-800111572104@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the required BAM and QUP nodes for the QUP1 SPI controller on IPQ5018.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20231004191303.331055-1-robimarko@gmail.com
[bjorn: Padded address to 8 digits, fixed node sort order]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

The rb2 only has a single USB controller, it can be switched between a
type-c port and an internal USB hub via a DIP switch. Until dynamic
role switching is available it's preferable to put the USB controller
in host mode so that the type-A ports and ethernet are available.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Fixes: eaa53a85 ("arm64: dts: qcom: qrb4210-rb2: Enable USB node")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231010-caleb-rb2-host-mode-v1-1-b057d443cd62@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add tsens and thermal devicetree node for sa8775p SoC.
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
Link: https://lore.kernel.org/r/20230926085948.23046-3-quic_priyjain@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add device node for sleep stats driver which provides various
low power mode stats.
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230929054805.27847-1-quic_rkakarla@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the USB3+DP Combo QMP PHY port subnodes to facilitate the
description of the connection between the hardware blocks.

Put it in the SoC DTSI to avoid duplication in the device DTs.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230929-sc7280-qmpphy-ports-v2-1-aae7e9c286b0@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

To make dtbs_check happy and the software more aware of what's going
on, describe the HSUSB PHY's regulators and tighten up VDDA_PLL to match.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230927-topic-6375_stuff-v1-4-12243e36b45c@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable the onboard QCA Wi-Fi. HW identifiers for reference:
qmi chip_id 0x320 chip_family 0x4001 board_id 0xff soc_id 0x400e0000

Firmware sources:
/vendor/firmware_mnt/image/wlanmdsp.bin -> qcom/.../wlanmdsp.mbn
/vendor/firmware_mnt/image/bdwlan.bXX [1] -> [2] -> ath10k/.../board-2.bin
[3] -> ath10k/.../firmware-5.bin

Not sure where 3 comes from on the device itself, gotta investigate that..

According to [4], it's called WCN3990_STRAIT.

Enable it and tighten the relevant regulators.

[1] XX = board_id printed when the file is missing or by your downstream
    kernel firmware loader in the dmesg; if XX=ff, use bdwlan.bin

[2] https://github.com/jhugo/linux/blob/5.5rc2_wifi/README
[3] https://github.com/kvalo/ath10k-firmware/blob/master/WCN3990/hw1.0/HL3.1/WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1/firmware-5.bin
[4] https://git.codelinaro.org/clo/la/platform/vendor/qcom-opensource/wlan/qca-wifi-host-cmn/-/blob/LA.VENDOR.1.0.r1-20700-WAIPIO.QSSI13.0/hif/src/hif_hw_version.h#L55Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230927-topic-6375_stuff-v1-3-12243e36b45c@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable the 5G modem on the Sony Xperia 10 IV.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230927-topic-6375_stuff-v1-2-12243e36b45c@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add UART1 node, generally used for the Bluetooth module.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230927-topic-6375_stuff-v1-1-12243e36b45c@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add support for wps buttons on GPIO 37.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230927-common-rdp-v3-2-3d07b3ff6d42@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add a dtsi file to include interfaces that are common
across RDPs.
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230927-common-rdp-v3-1-3d07b3ff6d42@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable USB2 in host mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Co-developed-by: Amandeep Singh <quic_amansing@quicinc.com>
Signed-off-by: Amandeep Singh <quic_amansing@quicinc.com>
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Link: https://lore.kernel.org/r/20230904063635.24975-5-quic_nsekar@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add USB phy and controller nodes.
Co-developed-by: Amandeep Singh <quic_amansing@quicinc.com>
Signed-off-by: Amandeep Singh <quic_amansing@quicinc.com>
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Link: https://lore.kernel.org/r/20230904063635.24975-4-quic_nsekar@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The sc7280 SoC has a True Random Number Generator, add the node with
the correct compatible set.
Signed-off-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Link: https://lore.kernel.org/r/20231015193901.2344590-5-quic_omprsing@quicinc.com
[bjorn: Padded address to 8 digits, moved hunk to maintain sort order]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

The sa8775p SoC has a True Random Number Generator, add the node with
the correct compatible set.
Signed-off-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Link: https://lore.kernel.org/r/20231015193901.2344590-4-quic_omprsing@quicinc.com
[bjorn: Padded address to 8 digits, moved hunk to maintain sort order]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

The SM8450 SoC has a True Random Number Generator, add the node with
the correct compatible set.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20231003-topic-sm8550-rng-v4-5-255e4d0ba08e@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the Qualcomm True Random Number Generator node.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20231003-topic-sm8550-rng-v4-4-255e4d0ba08e@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the missing regulator supplies to the ADV7533 HDMI bridge to fix
the following dtbs_check warnings. They are all also supplied by
pm8916_l6 so there is no functional difference.

apq8016-sbc.dtb: bridge@39: 'dvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'pvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'a2vdd-supply' is a required property
        from schema display/bridge/adi,adv7533.yaml

Fixes: 28546b09 ("arm64: dts: apq8016-sbc: Add HDMI display support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230922-db410c-adv7533-regulators-v1-1-68aba71e529b@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Now that the pm7250b.dtsi can be configured to be on a different SID, we
also need to specify it for this dts file. Set it to the SID 2/3 like it
was before commit 8e2d56f6 ("arm64: dts: qcom: pm7250b: make SID
configurable").

Fixes: 8e2d56f6 ("arm64: dts: qcom: pm7250b: make SID configurable")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230921-pm7250b-sid-fixup-v1-1-231c1a65471f@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Due to the presence of the fastboot micro cable in the CI farm,
it causes the hardware to remain in gadget mode instead of host mode.
So it doesn't find the network, which results in failure to mount root
fs via NFS.

Add an overlay dtso file that sets the dr_mode to host, allowing the
USB controllers to work in host mode. With commit 15d16d6d
("kbuild: Add generic rule to apply fdtoverlay"), overlay target can
be used to simplify the build of DTB overlays. It uses fdtoverlay to
merge base device tree with the overlay dtso. apq8016-sbc-usb-host.dtb
file can be used by drm-ci, mesa-ci.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20230911161518.650726-1-vignesh.raman@collabora.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add device tree for the Fairphone 5 smartphone which is based on
the QCM6490 SoC.

Supported features are, as of now:
* Bluetooth
* Debug UART
* Display via simplefb
* Flash/torch LED
* Flip cover sensor
* Power & volume buttons
* RTC
* SD card
* USB
* Various plumbing like regulators, i2c, spi, etc
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-7-14bb7cedadf5@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Fairphone 5 is a smartphone based on the QCM6490 SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-6-14bb7cedadf5@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add a node for the led controller found on PM8350C, used for flash and
torch purposes.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-4-14bb7cedadf5@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Like other Qualcomm PMICs the PM7250B can be used on different addresses
on the SPMI bus. Use similar defines like the PMK8350 to make this
possible but skip the ifndef based on maintainer feedback.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-3-14bb7cedadf5@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

With the standard Qualcomm TrustZone setup, components such as lpasscc,
pdc_reset and watchdog shouldn't be touched by Linux. Mark them with
the status 'reserved' and reenable them in the chrome-common dtsi.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230919-fp5-initial-v2-1-14bb7cedadf5@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Fix the apps iommu local address space range as per data sheet.

Fixes: 61550c6c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230917140039.25283-1-quic_gkohli@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Now that SCM has support for indicating that SDI has been enabled by
default, lets set the property so SCM disables it during probing.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20230816164641.3371878-4-robimarko@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Update bits to match downstream irq-bitmask values.

Fixes: 0484d3ce ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20230812112534.8610-8-a39.skl@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

MSM8976 downstream dts define reloc region which is used by pil-tz
to load both wcnss and lpass, on mainline however we might not be
able to do it and we need separate regions(also validating dts might get
problematic if we had to put memory-region(rproc node) per device).
Luckily it seems size and entry points in firmware headers appears
to be static across multiple devices including Sony Loire platform
and Xiaomi Redmi Note 3 Pro this should let us fit in first ~17MB
Split lpass region(reloc on downstream) into two separate regions.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20230812112534.8610-7-a39.skl@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

WLED is used for controlling the backlight on some boards, add the node
for it.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20230913185514.21840-1-danila@jiaxyga.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add an ICE node to sa8775p SoC description and enable it by adding a
phandle to the UFS node.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913153529.32777-2-bartosz.golaszewski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Both MSM8916 and MSM8939 have unnecessarily large reservations for the
venus firmware for some reason. According to the ELF headers and
downstream [1] 5 MiB is enough. Let's set the minimum size as default.

With the dynamic reserved memory allocations boards can easily override
this if needed, although in practice there does not seem to be any
device with a different venus firmware size.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blame/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L69Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-9-b7089ec3e3a1@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The modem firmware size is typically highly device-specific.
The current size of the mpss_mem region in msm8916.dtsi (0x2b00000)
only works for some APQ8016 devices without full-featured modem,
such as the DragonBoard 410c.

The full modem firmware is typically about twice as large (~45 MiB
-> ~90 MiB) but also varies by a few MiB from device to device. Since
these devices are quite memory-constrained nowadays it's important to
minimize the unnecessary memory reservations.

Make it clear that each board needs to specify the necessary mpss_mem
size by replacing the DB410c-specific size in msm8916.dtsi with a
simple comment. &mpss_mem is disabled by default so it's fine to leave
some properties up to the boards if they want to enable it.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-8-b7089ec3e3a1@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Now that we no longer have fixed addresses for the firmware memory
regions, disable them by default and only enable them together with
the actual user in the board DT.

This frees up unnecessary reserved memory for boards that do not use
some of the remoteprocs and allows moving selected device-specific
properties (such as firmware size) to the board-specific DT part in
the next step.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-7-b7089ec3e3a1@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Follow the example of MSM8916 and reserve the firmware memory regions
dynamically to allow boards to define only the device-specific parts.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-6-b7089ec3e3a1@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

At a first glance the MBA memory region on MSM8916 looks intentionally
placed at the fixed address 0x8ea00000. This is what the ELF headers of
the firmware specify as base address, and the typical Qualcomm-specific
bits suggest the binary is not relocatable.

However, on a closer look this is pointless: Unlike other firmware
images the hardware expects to have the raw ELF image loaded to the MBA
region, including the ELF header (without parsing it at all). This
means that we actually just load the ELF header (not the code!) at
0x8ea00000. The real LOAD segments follow at arbitrary aligned
addresses depending on the structure of the ELF binary.

In practice it looks like we can use an arbitrary 1 MiB-aligned region
for MBA. The downstream/vendor kernel just allocates this dynamically
at an arbitrary (aligned) address.

Drop the pointless fixed address and use the new dynamic reserved
memory mechanism to allocate a region close to the others. This reduces
gaps in the memory map and provides Linux with more contiguous memory.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-5-b7089ec3e3a1@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Most of the reserved firmware memory on MSM8916 can be relocated when
respecting the required alignment. To avoid having to precompute the
reserved memory regions in every board DT, describe the actual
requirements (size, alignment, alloc-ranges) using the dynamic reserved
memory allocation.

This approach has several advantages:

 1. We can define "templates" for the reserved memory regions in
    msm8916.dtsi and keep only device-specific details in the board DT.
    This is useful for the "mpss" region size for example, which varies
    from device to device. It is no longer necessary to redefine all
    firmware regions to shift their addresses.

 2. When some of the functionality (e.g. WCNSS, Modem, Venus) is not
    enabled or needed for a device, the reserved memory can stay
    disabled, freeing up the unused reservation for Linux.

 3. Devices with special requirements for one of the firmware regions
    are handled automatically. For example, msm8916-longcheer-l8150
    has non-relocatable "wcnss" firmware that must be loaded exactly
    at address 0x8b600000. When this is defined as a static region,
    the other dynamic allocations automatically adjust to a different
    place with suitable alignment.

All in all this approach significantly reduces the boilerplate necessary
to define the different firmware regions, and makes it easier to enable
functionality on the different devices.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-4-b7089ec3e3a1@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

gps_mem is needed by the modem firmware for GPS to work. However, it is
accessed via QMI memshare [1] which is not available upstream yet.
Until it lands upstream reserving this does not provide any advantage.

[1]: https://lore.kernel.org/linux-arm-msm/20210319172321.22248-1-nikitos.tr@gmail.com/Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230911-msm8916-rmem-v1-3-b7089ec3e3a1@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>