- 06 Mar, 2019 40 commits
-
-
Alexey Dobriyan authored
Test harness uses 4 for SKIP, not 2. Link: http://lkml.kernel.org/r/20190108193108.GA12259@avx2Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oscar Salvador authored
When using mremap() syscall in addition to MREMAP_FIXED flag, mremap() calls mremap_to() which does the following: 1) unmaps the destination region where we are going to move the map 2) If the new region is going to be smaller, we unmap the last part of the old region Then, we will eventually call move_vma() to do the actual move. move_vma() checks whether we are at least 4 maps below max_map_count before going further, otherwise it bails out with -ENOMEM. The problem is that we might have already unmapped the vma's in steps 1) and 2), so it is not possible for userspace to figure out the state of the vmas after it gets -ENOMEM, and it gets tricky for userspace to clean up properly on error path. While it is true that we can return -ENOMEM for more reasons (e.g: see may_expand_vm() or move_page_tables()), I think that we can avoid this scenario if we check early in mremap_to() if the operation has high chances to succeed map-wise. Should that not be the case, we can bail out before we even try to unmap anything, so we make sure the vma's are left untouched in case we are likely to be short of maps. The thumb-rule now is to rely on the worst-scenario case we can have. That is when both vma's (old region and new region) are going to be split in 3, so we get two more maps to the ones we already hold (one per each). If current map count + 2 maps still leads us to 4 maps below the threshold, we are going to pass the check in move_vma(). Of course, this is not free, as it might generate false positives when it is true that we are tight map-wise, but the unmap operation can release several vma's leading us to a good state. Another approach was also investigated [1], but it may be too much hassle for what it brings. [1] https://lore.kernel.org/lkml/20190219155320.tkfkwvqk53tfdojt@d104.suse.de/ Link: http://lkml.kernel.org/r/20190226091314.18446-1-osalvador@suse.deSigned-off-by:
Oscar Salvador <osalvador@suse.de> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Cyril Hrubis <chrubis@suse.cz> Signed-off-by:
-
Qian Cai authored
next_present_section_nr() could only return an unsigned number -1, so just check it specifically where compilers will convert -1 to unsigned if needed. mm/sparse.c: In function 'sparse_init_nid': mm/sparse.c:200:20: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] ((section_nr >= 0) && \ ^~ mm/sparse.c:478:2: note: in expansion of macro 'for_each_present_section_nr' for_each_present_section_nr(pnum_begin, pnum) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~ mm/sparse.c:200:20: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] ((section_nr >= 0) && \ ^~ mm/sparse.c:497:2: note: in expansion of macro 'for_each_present_section_nr' for_each_present_section_nr(pnum_begin, pnum) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~ mm/sparse.c: In function 'sparse_init': mm/sparse.c:200:20: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] ((section_nr >= 0) && \ ^~ mm/sparse.c:520:2: note: in expansion of macro 'for_each_present_section_nr' for_each_present_section_nr(pnum_begin + 1, pnum_end) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Link: http://lkml.kernel.org/r/20190228181839.86504-1-cai@lca.pw Fixes: c4e1be9e ("mm, sparsemem: break out of loops early") Signed-off-by:Qian Cai <cai@lca.pw> Reviewed-by:
-
Jan Stancek authored
LTP testcase mtest06 [1] can trigger a crash on s390x running 5.0.0-rc8. This is a stress test, where one thread mmaps/writes/munmaps memory area and other thread is trying to read from it: CPU: 0 PID: 2611 Comm: mmap1 Not tainted 5.0.0-rc8+ #51 Hardware name: IBM 2964 N63 400 (z/VM 6.4.0) Krnl PSW : 0404e00180000000 00000000001ac8d8 (__lock_acquire+0x7/0x7a8) Call Trace: ([<0000000000000000>] (null)) [<00000000001adae4>] lock_acquire+0xec/0x258 [<000000000080d1ac>] _raw_spin_lock_bh+0x5c/0x98 [<000000000012a780>] page_table_free+0x48/0x1a8 [<00000000002f6e54>] do_fault+0xdc/0x670 [<00000000002fadae>] __handle_mm_fault+0x416/0x5f0 [<00000000002fb138>] handle_mm_fault+0x1b0/0x320 [<00000000001248cc>] do_dat_exception+0x19c/0x2c8 [<000000000080e5ee>] pgm_check_handler+0x19e/0x200 page_table_free() is called with NULL mm parameter, but because "0" is a valid address on s390 (see S390_lowcore), it keeps going until it eventually crashes in lockdep's lock_acquire. This crash is reproducible at least since 4.14. Problem is that "vmf->vma" used in do_fault() can become stale. Because mmap_sem may be released, other threads can come in, call munmap() and cause "vma" be returned to kmem cache, and get zeroed/re-initialized and re-used: handle_mm_fault | __handle_mm_fault | do_fault | vma = vmf->vma | do_read_fault | __do_fault | vma->vm_ops->fault(vmf); | mmap_sem is released | | | do_munmap() | remove_vma_list() | remove_vma() | vm_area_free() | # vma is released | ... | # same vma is allocated | # from kmem cache | do_mmap() | vm_area_alloc() | memset(vma, 0, ...) | pte_free(vma->vm_mm, ...); | page_table_free | spin_lock_bh(&mm->context.lock);| <crash> | Cache mm_struct to avoid using potentially stale "vma". [1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/mem/mtest06/mmap1.c Link: http://lkml.kernel.org/r/5b3fdf19e2a5be460a384b936f5b56e13733f1b8.1551595137.git.jstancek@redhat.comSigned-off-by:Jan Stancek <jstancek@redhat.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
Matthew Wilcox <willy@infradead.org> Acked-by:
Rafael Aquini <aquini@redhat.com> Reviewed-by:
Minchan Kim <minchan@kernel.org> Acked-by:
-
Greg Thelen authored
Commit 682aa8e1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates") refers to inode_switch_wb_work_fn() which never got merged. Switch the comments to inode_switch_wbs_work_fn(). Link: http://lkml.kernel.org/r/20190305004617.142590-1-gthelen@google.com Fixes: 682aa8e1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates") Signed-off-by:
Greg Thelen <gthelen@google.com> Reviewed-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Qian Cai authored
Commit a00cc7d9 ("mm, x86: add support for PUD-sized transparent hugepages") introduced pudp_huge_get_and_clear_full() but no one uses its return code. In order to not diverge from pmdp_huge_get_and_clear_full(), just change zap_huge_pud() to not assign the return value from pudp_huge_get_and_clear_full(). mm/huge_memory.c: In function 'zap_huge_pud': mm/huge_memory.c:1982:8: warning: variable 'orig_pud' set but not used [-Wunused-but-set-variable] pud_t orig_pud; ^~~~~~~~ Link: http://lkml.kernel.org/r/20190301221956.97493-1-cai@lca.pwSigned-off-by:
-
Qian Cai authored
When onlining a memory block with DEBUG_PAGEALLOC, it unmaps the pages in the block from kernel, However, it does not map those pages while offlining at the beginning. As the result, it triggers a panic below while onlining on ppc64le as it checks if the pages are mapped before unmapping. However, the imbalance exists for all arches where double-unmappings could happen. Therefore, let kernel map those pages in generic_online_page() before they have being freed into the page allocator for the first time where it will set the page count to one. On the other hand, it works fine during the boot, because at least for IBM POWER8, it does, early_setup early_init_mmu harsh__early_init_mmu htab_initialize [1] htab_bolt_mapping [2] where it effectively map all memblock regions just like kernel_map_linear_page(), so later mem_init() -> memblock_free_all() will unmap them just fine without any imbalance. On other arches without this imbalance checking, it still unmap them once at the most. [1] for_each_memblock(memory, reg) { base = (unsigned long)__va(reg->base); size = reg->size; DBG("creating mapping for region: %lx..%lx (prot: %lx)\n", base, size, prot); BUG_ON(htab_bolt_mapping(base, base + size, __pa(base), prot, mmu_linear_psize, mmu_kernel_ssize)); } [2] linear_map_hash_slots[paddr >> PAGE_SHIFT] = ret | 0x80; kernel BUG at arch/powerpc/mm/hash_utils_64.c:1815! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=256 DEBUG_PAGEALLOC NUMA pSeries CPU: 2 PID: 4298 Comm: bash Not tainted 5.0.0-rc7+ #15 NIP: c000000000062670 LR: c00000000006265c CTR: 0000000000000000 REGS: c0000005bf8a75b0 TRAP: 0700 Not tainted (5.0.0-rc7+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28422842 XER: 00000000 CFAR: c000000000804f44 IRQMASK: 1 NIP [c000000000062670] __kernel_map_pages+0x2e0/0x4f0 LR [c00000000006265c] __kernel_map_pages+0x2cc/0x4f0 Call Trace: __kernel_map_pages+0x2cc/0x4f0 free_unref_page_prepare+0x2f0/0x4d0 free_unref_page+0x44/0x90 __online_page_free+0x84/0x110 online_pages_range+0xc0/0x150 walk_system_ram_range+0xc8/0x120 online_pages+0x280/0x5a0 memory_subsys_online+0x1b4/0x270 device_online+0xc0/0xf0 state_store+0xc0/0x180 dev_attr_store+0x3c/0x60 sysfs_kf_write+0x70/0xb0 kernfs_fop_write+0x10c/0x250 __vfs_write+0x48/0x240 vfs_write+0xd8/0x210 ksys_write+0x70/0x120 system_call+0x5c/0x70 Link: http://lkml.kernel.org/r/20190301220814.97339-1-cai@lca.pwSigned-off-by: -
Qian Cai authored
Commit 23067153 ("mm: memory.low hierarchical behavior") missed an asterisk in one of the comments. mm/memcontrol.c:5774: warning: bad line: | 0, otherwise. Link: http://lkml.kernel.org/r/20190301143734.94393-1-cai@lca.pwAcked-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
-
Peng Fan authored
In case cma_init_reserved_mem failed, need to free the memblock allocated by memblock_reserve or memblock_alloc_range. Quote Catalin's comments: https://lkml.org/lkml/2019/2/26/482 Kmemleak is supposed to work with the memblock_{alloc,free} pair and it ignores the memblock_reserve() as a memblock_alloc() implementation detail. It is, however, tolerant to memblock_free() being called on a sub-range or just a different range from a previous memblock_alloc(). So the original patch looks fine to me. FWIW: Link: http://lkml.kernel.org/r/20190227144631.16708-1-peng.fan@nxp.comSigned-off-by:
Peng Fan <peng.fan@nxp.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Qian Cai authored
After offlining a memory block, kmemleak scan will trigger a crash, as it encounters a page ext address that has already been freed during memory offlining. At the beginning in alloc_page_ext(), it calls kmemleak_alloc(), but it does not call kmemleak_free() in free_page_ext(). BUG: unable to handle kernel paging request at ffff888453d00000 PGD 128a01067 P4D 128a01067 PUD 128a04067 PMD 47e09e067 PTE 800ffffbac2ff060 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 1 PID: 1594 Comm: bash Not tainted 5.0.0-rc8+ #15 Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20 10/25/2017 RIP: 0010:scan_block+0xb5/0x290 Code: 85 6e 01 00 00 48 b8 00 00 30 f5 81 88 ff ff 48 39 c3 0f 84 5b 01 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 0f 85 87 01 00 00 <4c> 8b 3b e8 f3 0c fa ff 4c 39 3d 0c 6b 4c 01 0f 87 08 01 00 00 4c RSP: 0018:ffff8881ec57f8e0 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff888453d00000 RCX: ffffffffa61e5a54 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff888453d00000 RBP: ffff8881ec57f920 R08: fffffbfff4ed588d R09: fffffbfff4ed588c R10: fffffbfff4ed588c R11: ffffffffa76ac463 R12: dffffc0000000000 R13: ffff888453d00ff9 R14: ffff8881f80cef48 R15: ffff8881f80cef48 FS: 00007f6c0e3f8740(0000) GS:ffff8881f7680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888453d00000 CR3: 00000001c4244003 CR4: 00000000001606a0 Call Trace: scan_gray_list+0x269/0x430 kmemleak_scan+0x5a8/0x10f0 kmemleak_write+0x541/0x6ca full_proxy_write+0xf8/0x190 __vfs_write+0xeb/0x980 vfs_write+0x15a/0x4f0 ksys_write+0xd2/0x1b0 __x64_sys_write+0x73/0xb0 do_syscall_64+0xeb/0xaaa entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f6c0dad73b8 Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 63 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55 RSP: 002b:00007ffd5b863cb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007f6c0dad73b8 RDX: 0000000000000005 RSI: 000055a9216e1710 RDI: 0000000000000001 RBP: 000055a9216e1710 R08: 000000000000000a R09: 00007ffd5b863840 R10: 000000000000000a R11: 0000000000000246 R12: 00007f6c0dda9780 R13: 0000000000000005 R14: 00007f6c0dda4740 R15: 0000000000000005 Modules linked in: nls_iso8859_1 nls_cp437 vfat fat kvm_intel kvm irqbypass efivars ip_tables x_tables xfs sd_mod ahci libahci igb i2c_algo_bit libata i2c_core dm_mirror dm_region_hash dm_log dm_mod efivarfs CR2: ffff888453d00000 ---[ end trace ccf646c7456717c5 ]--- Kernel panic - not syncing: Fatal exception Shutting down cpus with NMI Kernel Offset: 0x24c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- Link: http://lkml.kernel.org/r/20190227173147.75650-1-cai@lca.pwSigned-off-by: -
Andrey Ryabinin authored
too_many_isolated() in mm/compaction.c looks only at node state, so it makes more sense to change argument to pgdat instead of zone. Link: http://lkml.kernel.org/r/20190228083329.31892-3-aryabinin@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Rik van Riel <riel@surriel.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: William Kucharski <william.kucharski@oracle.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
Andrey Ryabinin authored
We have common pattern to access lru_lock from a page pointer: zone_lru_lock(page_zone(page)) Which is silly, because it unfolds to this: &NODE_DATA(page_to_nid(page))->node_zones[page_zonenum(page)]->zone_pgdat->lru_lock while we can simply do &NODE_DATA(page_to_nid(page))->lru_lock Remove zone_lru_lock() function, since it's only complicate things. Use 'page_pgdat(page)->lru_lock' pattern instead. [aryabinin@virtuozzo.com: a slightly better version of __split_huge_page()] Link: http://lkml.kernel.org/r/20190301121651.7741-1-aryabinin@virtuozzo.com Link: http://lkml.kernel.org/r/20190228083329.31892-2-aryabinin@virtuozzo.comSigned-off-by:
-
Andrey Ryabinin authored
workingset_eviction() doesn't use and never did use the @mapping argument. Remove it. Link: http://lkml.kernel.org/r/20190228083329.31892-1-aryabinin@virtuozzo.comSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kvzalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kvzalloc(struct_size(instance, entry, count), GFP_KERNEL); Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Link: http://lkml.kernel.org/r/20190221154622.GA19599@embeddedorSigned-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
-
Yue Hu authored
Currently cma_debugfs_root is static storage. That is unnecessary since it will be only used by next cma_debugfs_add_one(). We can just pass it to following calling to save thisspace. Also remove useless idx parameter. Link: http://lkml.kernel.org/r/20190221040130.8940-1-zbestahu@gmail.comSigned-off-by:
Yue Hu <huyue2@yulong.com> Reviewed-by:
-
Alexey Dobriyan authored
Mount tmpfs with "nr_inodes=3" for easy check. Link: http://lkml.kernel.org/r/20190219215016.GA20084@avx2Signed-off-by:
-
Mike Rapoport authored
Add entry for memblock in MAINTAINERS file Link: http://lkml.kernel.org/r/20190214093630.GC9063@rapoport-lnxSigned-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Yu Zhao authored
find_get_pages_range() and find_get_pages_range_tag() already correctly increment reference count on head when seeing compound page, but they may still use page index from tail. Page index from tail is always zero, so these functions don't work on huge shmem. This hasn't been a problem because, AFAIK, nobody calls these functions on (huge) shmem. Fix them anyway just in case. Link: http://lkml.kernel.org/r/20190110030838.84446-1-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Reviewed-by:
William Kucharski <william.kucharski@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Dave Chinner <david@fromorbit.com> Cc: "Darrick J . Wong" <darrick.wong@oracle.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Christoph Hellwig authored
This function is only used by built-in code, which makes perfect sense given the purpose of it. Link: http://lkml.kernel.org/r/20190213174621.29297-2-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Tobin C. Harding authored
Attempt to make the usage comment for debug options a little cleaner. Link: http://lkml.kernel.org/r/20190212001219.27769-5-tobin@kernel.orgSigned-off-by:
Tobin C. Harding <tobin@kernel.org> Acked-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
-
Tobin C. Harding authored
Usage message uses spaces not tabspaces, a few tabspaces have snuck in making the columns not align correctly when output. Align usage output columns using spaces instead of tabspaces. Link: http://lkml.kernel.org/r/20190212001219.27769-4-tobin@kernel.orgSigned-off-by:
-
Tobin C. Harding authored
Primarily the usage message lists options in alphabetic order however there are a bunch of the options that are not in alphabetic order. Put options in alphabetic order. Link: http://lkml.kernel.org/r/20190212001219.27769-3-tobin@kernel.orgSigned-off-by:
-
Tobin C. Harding authored
Currently usage message list only a subset of the available options. should list them all. Update options in usage massage to include all available options. Link: http://lkml.kernel.org/r/20190212001219.27769-2-tobin@kernel.orgSigned-off-by:
-
Yu Zhao authored
Declaration of struct node is required regardless. On UMA systems, including compaction.h without preceding node.h shouldn't cause a build error. Link: http://lkml.kernel.org/r/20190208080437.253322-1-yuzhao@google.comSigned-off-by:
-
Oscar Salvador authored
isolate_huge_page() expects we pass the head of hugetlb page to it: bool isolate_huge_page(...) { ... VM_BUG_ON_PAGE(!PageHead(page), page); ... } While I really cannot think of any situation where we end up with a non-head page between hands in do_migrate_range(), let us make sure the code is as sane as possible by explicitly passing the Head. Since we already got the pointer, it does not take us extra effort. Link: http://lkml.kernel.org/r/20190208090604.975-1-osalvador@suse.deSigned-off-by:David Hildenbrand <david@redhat.com> Acked-by:
-
john.hubbard@gmail.com authored
From: John Hubbard <jhubbard@nvidia.com> This combines the common elements of these routines: page_cache_get_speculative() page_cache_add_speculative() This was anticipated by the original author, as shown by the comment in commit ce0ad7f0 ("powerpc/mm: Lockless get_user_pages_fast() for 64-bit (v3)"): "Same as above, but add instead of inc (could just be merged)" There is no intention to introduce any behavioral change, but there is a small risk of that, due to slightly differing ways of expressing the TINY_RCU and related configurations. This also removes the VM_BUG_ON(in_interrupt()) that was in page_cache_add_speculative(), but not in page_cache_get_speculative(). This provides slightly less detection of such bugs, but it given that it was only there on the "add" path anyway, we can likely do without it just fine. And it removes the VM_BUG_ON_PAGE(PageCompound(page) && page != compound_head(page), page); that page_cache_add_speculative() had. Link: http://lkml.kernel.org/r/20190206231016.22734-2-jhubbard@nvidia.comSigned-off-by:John Hubbard <jhubbard@nvidia.com> Reviewed-by:
-
Jan Kara authored
Andrea has noted that page migration code propagates page_mapping(page) through the whole migration stack down to migrate_page() function so it seems stupid to then use page_mapping(page) in expected_page_refs() instead of passed down 'mapping' argument. I agree so let's make expected_page_refs() more in line with the rest of the migration stack. Link: http://lkml.kernel.org/r/20190207112314.24872-1-jack@suse.czSigned-off-by:
Jan Kara <jack@suse.cz> Suggested-by:
-
Mike Rapoport authored
Many kernel-doc comments in mm/ have the return value descriptions either misformatted or omitted at all which makes kernel-doc script unhappy: $ make V=1 htmldocs ... ./mm/util.c:36: info: Scanning doc for kstrdup ./mm/util.c:41: warning: No description found for return value of 'kstrdup' ./mm/util.c:57: info: Scanning doc for kstrdup_const ./mm/util.c:66: warning: No description found for return value of 'kstrdup_const' ./mm/util.c:75: info: Scanning doc for kstrndup ./mm/util.c:83: warning: No description found for return value of 'kstrndup' ... Fixing the formatting and adding the missing return value descriptions eliminates ~100 such warnings. Link: http://lkml.kernel.org/r/1549549644-4903-4-git-send-email-rppt@linux.ibm.comSigned-off-by:
-
Mike Rapoport authored
The descriptions of userspace memory access functions had minor issues with formatting that made kernel-doc unable to properly detect the function/macro names and the return value sections: ./arch/x86/include/asm/uaccess.h:80: info: Scanning doc for ./arch/x86/include/asm/uaccess.h:139: info: Scanning doc for ./arch/x86/include/asm/uaccess.h:231: info: Scanning doc for ./arch/x86/include/asm/uaccess.h:505: info: Scanning doc for ./arch/x86/include/asm/uaccess.h:530: info: Scanning doc for ./arch/x86/lib/usercopy_32.c:58: info: Scanning doc for ./arch/x86/lib/usercopy_32.c:69: warning: No description found for return value of 'clear_user' ./arch/x86/lib/usercopy_32.c:78: info: Scanning doc for ./arch/x86/lib/usercopy_32.c:90: warning: No description found for return value of '__clear_user' Fix the formatting. Link: http://lkml.kernel.org/r/1549549644-4903-3-git-send-email-rppt@linux.ibm.comSigned-off-by:
-
Mike Rapoport authored
Some kernel-doc comments in mm/vmalloc.c have leading tab in indentation. This leads to excessive indentation in the generated HTML and to the inconsistency of its layout ([1] vs [2]). Besides, multi-line Note: sections are not handled properly with extra indentation. [1] https://www.kernel.org/doc/html/v4.20/core-api/mm-api.html?#c.vm_map_ram [2] https://www.kernel.org/doc/html/v4.20/core-api/mm-api.html?#c.vfree Link: http://lkml.kernel.org/r/1549549644-4903-2-git-send-email-rppt@linux.ibm.comSigned-off-by:
-
Michael S. Tsirkin authored
mm/debug-pagealloc.c is no more, so of course header now needs to be updated. This seems like something checkpatch should be able to catch - worth looking into? Link: http://lkml.kernel.org/r/20190207191113.14039-1-mst@redhat.com Fixes: 8823b1db ("mm/page_poison.c: enable PAGE_POISONING as a separate option") Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
-
Alexey Dobriyan authored
Number of online NUMA nodes can't be negative as well. This doesn't save space as the variable is used only in 32-bit context, but do it anyway for consistency. Link: http://lkml.kernel.org/r/20190201223151.GB15820@avx2Signed-off-by:
-
Alexey Dobriyan authored
Number of NUMA nodes can't be negative. This saves a few bytes on x86_64: add/remove: 0/0 grow/shrink: 4/21 up/down: 27/-265 (-238) Function old new delta hv_synic_alloc.cold 88 110 +22 prealloc_shrinker 260 262 +2 bootstrap 249 251 +2 sched_init_numa 1566 1567 +1 show_slab_objects 778 777 -1 s_show 1201 1200 -1 kmem_cache_init 346 345 -1 __alloc_workqueue_key 1146 1145 -1 mem_cgroup_css_alloc 1614 1612 -2 __do_sys_swapon 4702 4699 -3 __list_lru_init 655 651 -4 nic_probe 2379 2374 -5 store_user_store 118 111 -7 red_zone_store 106 99 -7 poison_store 106 99 -7 wq_numa_init 348 338 -10 __kmem_cache_empty 75 65 -10 task_numa_free 186 173 -13 merge_across_nodes_store 351 336 -15 irq_create_affinity_masks 1261 1246 -15 do_numa_crng_init 343 321 -22 task_numa_fault 4760 4737 -23 swapfile_init 179 156 -23 hv_synic_alloc 536 492 -44 apply_wqattrs_prepare 746 695 -51 Link: http://lkml.kernel.org/r/20190201223029.GA15820@avx2Signed-off-by:
-
Tetsuo Handa authored
Since setting global init process to some memory cgroup is technically possible, oom_kill_memcg_member() must check it. Tasks in /test1 are going to be killed due to memory.oom.group set Memory cgroup out of memory: Killed process 1 (systemd) total-vm:43400kB, anon-rss:1228kB, file-rss:3992kB, shmem-rss:0kB oom_reaper: reaped process 1 (systemd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000008b #include <stdio.h> #include <string.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> int main(int argc, char *argv[]) { static char buffer[10485760]; static int pipe_fd[2] = { EOF, EOF }; unsigned int i; int fd; char buf[64] = { }; if (pipe(pipe_fd)) return 1; if (chdir("/sys/fs/cgroup/")) return 1; fd = open("cgroup.subtree_control", O_WRONLY); write(fd, "+memory", 7); close(fd); mkdir("test1", 0755); fd = open("test1/memory.oom.group", O_WRONLY); write(fd, "1", 1); close(fd); fd = open("test1/cgroup.procs", O_WRONLY); write(fd, "1", 1); snprintf(buf, sizeof(buf) - 1, "%d", getpid()); write(fd, buf, strlen(buf)); close(fd); snprintf(buf, sizeof(buf) - 1, "%lu", sizeof(buffer) * 5); fd = open("test1/memory.max", O_WRONLY); write(fd, buf, strlen(buf)); close(fd); for (i = 0; i < 10; i++) if (fork() == 0) { char c; close(pipe_fd[1]); read(pipe_fd[0], &c, 1); memset(buffer, 0, sizeof(buffer)); sleep(3); _exit(0); } close(pipe_fd[0]); close(pipe_fd[1]); sleep(3); return 0; } [ 37.052923][ T9185] a.out invoked oom-killer: gfp_mask=0xcc0(GFP_KERNEL), order=0, oom_score_adj=0 [ 37.056169][ T9185] CPU: 4 PID: 9185 Comm: a.out Kdump: loaded Not tainted 5.0.0-rc4-next-20190131 #280 [ 37.059205][ T9185] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018 [ 37.062954][ T9185] Call Trace: [ 37.063976][ T9185] dump_stack+0x67/0x95 [ 37.065263][ T9185] dump_header+0x51/0x570 [ 37.066619][ T9185] ? trace_hardirqs_on+0x3f/0x110 [ 37.068171][ T9185] ? _raw_spin_unlock_irqrestore+0x3d/0x70 [ 37.069967][ T9185] oom_kill_process+0x18d/0x210 [ 37.071515][ T9185] out_of_memory+0x11b/0x380 [ 37.072936][ T9185] mem_cgroup_out_of_memory+0xb6/0xd0 [ 37.074601][ T9185] try_charge+0x790/0x820 [ 37.076021][ T9185] mem_cgroup_try_charge+0x42/0x1d0 [ 37.077629][ T9185] mem_cgroup_try_charge_delay+0x11/0x30 [ 37.079370][ T9185] do_anonymous_page+0x105/0x5e0 [ 37.080939][ T9185] __handle_mm_fault+0x9cb/0x1070 [ 37.082485][ T9185] handle_mm_fault+0x1b2/0x3a0 [ 37.083819][ T9185] ? handle_mm_fault+0x47/0x3a0 [ 37.085181][ T9185] __do_page_fault+0x255/0x4c0 [ 37.086529][ T9185] do_page_fault+0x28/0x260 [ 37.087788][ T9185] ? page_fault+0x8/0x30 [ 37.088978][ T9185] page_fault+0x1e/0x30 [ 37.090142][ T9185] RIP: 0033:0x7f8b183aefe0 [ 37.091433][ T9185] Code: 20 f3 44 0f 7f 44 17 d0 f3 44 0f 7f 47 30 f3 44 0f 7f 44 17 c0 48 01 fa 48 83 e2 c0 48 39 d1 74 a3 66 0f 1f 84 00 00 00 00 00 <66> 44 0f 7f 01 66 44 0f 7f 41 10 66 44 0f 7f 41 20 66 44 0f 7f 41 [ 37.096917][ T9185] RSP: 002b:00007fffc5d329e8 EFLAGS: 00010206 [ 37.098615][ T9185] RAX: 00000000006010e0 RBX: 0000000000000008 RCX: 0000000000c30000 [ 37.100905][ T9185] RDX: 00000000010010c0 RSI: 0000000000000000 RDI: 00000000006010e0 [ 37.103349][ T9185] RBP: 0000000000000000 R08: 00007f8b188f4740 R09: 0000000000000000 [ 37.105797][ T9185] R10: 00007fffc5d32420 R11: 00007f8b183aef40 R12: 0000000000000005 [ 37.108228][ T9185] R13: 0000000000000000 R14: ffffffffffffffff R15: 0000000000000000 [ 37.110840][ T9185] memory: usage 51200kB, limit 51200kB, failcnt 125 [ 37.113045][ T9185] memory+swap: usage 0kB, limit 9007199254740988kB, failcnt 0 [ 37.115808][ T9185] kmem: usage 0kB, limit 9007199254740988kB, failcnt 0 [ 37.117660][ T9185] Memory cgroup stats for /test1: cache:0KB rss:49484KB rss_huge:30720KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB inactive_anon:0KB active_anon:49700KB inactive_file:0KB active_file:0KB unevictable:0KB [ 37.123371][ T9185] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,oom_memcg=/test1,task_memcg=/test1,task=a.out,pid=9188,uid=0 [ 37.128158][ T9185] Memory cgroup out of memory: Killed process 9188 (a.out) total-vm:14456kB, anon-rss:10324kB, file-rss:504kB, shmem-rss:0kB [ 37.132710][ T9185] Tasks in /test1 are going to be killed due to memory.oom.group set [ 37.132833][ T54] oom_reaper: reaped process 9188 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB [ 37.135498][ T9185] Memory cgroup out of memory: Killed process 1 (systemd) total-vm:43400kB, anon-rss:1228kB, file-rss:3992kB, shmem-rss:0kB [ 37.143434][ T9185] Memory cgroup out of memory: Killed process 9182 (a.out) total-vm:14456kB, anon-rss:76kB, file-rss:588kB, shmem-rss:0kB [ 37.144328][ T54] oom_reaper: reaped process 1 (systemd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB [ 37.147585][ T9185] Memory cgroup out of memory: Killed process 9183 (a.out) total-vm:14456kB, anon-rss:6228kB, file-rss:512kB, shmem-rss:0kB [ 37.157222][ T9185] Memory cgroup out of memory: Killed process 9184 (a.out) total-vm:14456kB, anon-rss:6228kB, file-rss:508kB, shmem-rss:0kB [ 37.157259][ T9185] Memory cgroup out of memory: Killed process 9185 (a.out) total-vm:14456kB, anon-rss:6228kB, file-rss:512kB, shmem-rss:0kB [ 37.157291][ T9185] Memory cgroup out of memory: Killed process 9186 (a.out) total-vm:14456kB, anon-rss:4180kB, file-rss:508kB, shmem-rss:0kB [ 37.157306][ T54] oom_reaper: reaped process 9183 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB [ 37.157328][ T9185] Memory cgroup out of memory: Killed process 9187 (a.out) total-vm:14456kB, anon-rss:4180kB, file-rss:512kB, shmem-rss:0kB [ 37.157452][ T9185] Memory cgroup out of memory: Killed process 9189 (a.out) total-vm:14456kB, anon-rss:6228kB, file-rss:512kB, shmem-rss:0kB [ 37.158733][ T9185] Memory cgroup out of memory: Killed process 9190 (a.out) total-vm:14456kB, anon-rss:552kB, file-rss:512kB, shmem-rss:0kB [ 37.160083][ T54] oom_reaper: reaped process 9186 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB [ 37.160187][ T54] oom_reaper: reaped process 9189 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB [ 37.206941][ T54] oom_reaper: reaped process 9185 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB [ 37.212300][ T9185] Memory cgroup out of memory: Killed process 9191 (a.out) total-vm:14456kB, anon-rss:4180kB, file-rss:512kB, shmem-rss:0kB [ 37.212317][ T54] oom_reaper: reaped process 9190 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB [ 37.218860][ T9185] Memory cgroup out of memory: Killed process 9192 (a.out) total-vm:14456kB, anon-rss:1080kB, file-rss:512kB, shmem-rss:0kB [ 37.227667][ T54] oom_reaper: reaped process 9192 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB [ 37.292323][ T9193] abrt-hook-ccpp (9193) used greatest stack depth: 10480 bytes left [ 37.351843][ T1] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000008b [ 37.354833][ T1] CPU: 7 PID: 1 Comm: systemd Kdump: loaded Not tainted 5.0.0-rc4-next-20190131 #280 [ 37.357876][ T1] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018 [ 37.361685][ T1] Call Trace: [ 37.363239][ T1] dump_stack+0x67/0x95 [ 37.365010][ T1] panic+0xfc/0x2b0 [ 37.366853][ T1] do_exit+0xd55/0xd60 [ 37.368595][ T1] do_group_exit+0x47/0xc0 [ 37.370415][ T1] get_signal+0x32a/0x920 [ 37.372449][ T1] ? _raw_spin_unlock_irqrestore+0x3d/0x70 [ 37.374596][ T1] do_signal+0x32/0x6e0 [ 37.376430][ T1] ? exit_to_usermode_loop+0x26/0x9b [ 37.378418][ T1] ? prepare_exit_to_usermode+0xa8/0xd0 [ 37.380571][ T1] exit_to_usermode_loop+0x3e/0x9b [ 37.382588][ T1] prepare_exit_to_usermode+0xa8/0xd0 [ 37.384594][ T1] ? page_fault+0x8/0x30 [ 37.386453][ T1] retint_user+0x8/0x18 [ 37.388160][ T1] RIP: 0033:0x7f42c06974a8 [ 37.389922][ T1] Code: Bad RIP value. [ 37.391788][ T1] RSP: 002b:00007ffc3effd388 EFLAGS: 00010213 [ 37.394075][ T1] RAX: 000000000000000e RBX: 00007ffc3effd390 RCX: 0000000000000000 [ 37.396963][ T1] RDX: 000000000000002a RSI: 00007ffc3effd390 RDI: 0000000000000004 [ 37.399550][ T1] RBP: 00007ffc3effd680 R08: 0000000000000000 R09: 0000000000000000 [ 37.402334][ T1] R10: 00000000ffffffff R11: 0000000000000246 R12: 0000000000000001 [ 37.404890][ T1] R13: ffffffffffffffff R14: 0000000000000884 R15: 000056460b1ac3b0 Link: http://lkml.kernel.org/r/201902010336.x113a4EO027170@www262.sakura.ne.jp Fixes: 3d8b38eb ("mm, oom: introduce memory.oom.group") Signed-off-by:Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
-
Daniel Jordan authored
Dan Carpenter reports a potential NULL dereference in get_swap_page_of_type: Smatch complains that the NULL checks on "si" aren't consistent. This seems like a real bug because we have not ensured that the type is valid and so "si" can be NULL. Add the missing check for NULL, taking care to use a read barrier to ensure CPU1 observes CPU0's updates in the correct order: CPU0 CPU1 alloc_swap_info() if (type >= nr_swapfiles) swap_info[type] = p /* handle invalid entry */ smp_wmb() smp_rmb() ++nr_swapfiles p = swap_info[type] Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before CPU0's write to swap_info[type] and read NULL from swap_info[type]. Ying Huang noticed other places in swapfile.c don't order these reads properly. Introduce swap_type_to_swap_info to encourage correct usage. Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model (see tools/memory-model/Documentation/explanation.txt). This ordering need not be enforced in places where swap_lock is held (e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles and the swap_info array. Link: http://lkml.kernel.org/r/20190131024410.29859-1-daniel.m.jordan@oracle.com Fixes: ec8acf20 ("swap: add per-partition lock for swapfile") Signed-off-by:Daniel Jordan <daniel.m.jordan@oracle.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Suggested-by:
"Huang, Ying" <ying.huang@intel.com> Reviewed-by:
Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Kirill Tkhai authored
On path shrink_inactive_list() ---> shrink_page_list() we allocate stack variables for the statistics twice. This is completely useless, and this just consumes stack much more, then we really need. The patch kills duplicate stack variables from shrink_page_list(), and this reduce stack usage and object file size significantly: Stack usage: Before: vmscan.c:1122:22:shrink_page_list 648 static After: vmscan.c:1122:22:shrink_page_list 616 static Size of vmscan.o: text data bss dec hex filename Before: 56866 4720 128 61714 f112 mm/vmscan.o After: 56770 4720 128 61618 f0b2 mm/vmscan.o Link: http://lkml.kernel.org/r/154894900030.5211.12104993874109647641.stgit@localhost.localdomainSigned-off-by:Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by:
-
Yang Shi authored
ksmd needs to search the stable tree to look for the suitable KSM page, but the KSM page might be locked for a while due to i.e. KSM page rmap walk. Basically it is not a big deal since commit 2c653d0e ("ksm: introduce ksm_max_page_sharing per page deduplication limit"), since max_page_sharing limits the number of shared KSM pages. But it still sounds not worth waiting for the lock, the page can be skip, then try to merge it in the next scan to avoid potential stall if its content is still intact. Introduce trylock mode to get_ksm_page() to not block on page lock, like what try_to_merge_one_page() does. And, define three possible operations (nolock, lock and trylock) as enum type to avoid stacking up bools and make the code more readable. Return -EBUSY if trylock fails, since NULL means not find suitable KSM page, which is a valid case. With the default max_page_sharing setting (256), there is almost no observed change comparing lock vs trylock. However, with ksm02 of LTP, the reduced ksmd full scan time can be observed, which has set max_page_sharing to 786432. With lock version, ksmd may tak 10s - 11s to run two full scans, with trylock version ksmd may take 8s - 11s to run two full scans. And, the number of pages_sharing and pages_to_scan keep same. Basically, this change has no harm. [hughd@google.com: fix BUG_ON()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1902182122280.6914@eggly.anvils Link: http://lkml.kernel.org/r/1548793753-62377-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Suggested-by:
-
Chris Down authored
Currently THP allocation events data is fairly opaque, since you can only get it system-wide. This patch makes it easier to reason about transparent hugepage behaviour on a per-memcg basis. For anonymous THP-backed pages, we already have MEMCG_RSS_HUGE in v1, which is used for v1's rss_huge [sic]. This is reused here as it's fairly involved to untangle NR_ANON_THPS right now to make it per-memcg, since right now some of this is delegated to rmap before we have any memcg actually assigned to the page. It's a good idea to rework that, but let's leave untangling THP allocation for a future patch. [akpm@linux-foundation.org: fix build] [chris@chrisdown.name: fix memcontrol build when THP is disabled] Link: http://lkml.kernel.org/r/20190131160802.GA5777@chrisdown.name Link: http://lkml.kernel.org/r/20190129205852.GA7310@chrisdown.nameSigned-off-by:
Chris Down <chris@chrisdown.name> Acked-by:
-
Yang Shi authored
In current implementation, both kswapd and direct reclaim has to iterate all mem cgroups. It is not a problem before offline mem cgroups could be iterated. But, currently with iterating offline mem cgroups, it could be very time consuming. In our workloads, we saw over 400K mem cgroups accumulated in some cases, only a few hundred are online memcgs. Although kswapd could help out to reduce the number of memcgs, direct reclaim still get hit with iterating a number of offline memcgs in some cases. We experienced the responsiveness problems due to this occassionally. A simple test with pref shows it may take around 220ms to iterate 8K memcgs in direct reclaim: dd 13873 [011] 578.542919: vmscan:mm_vmscan_direct_reclaim_begin dd 13873 [011] 578.758689: vmscan:mm_vmscan_direct_reclaim_end So for 400K, it may take around 11 seconds to iterate all memcgs. Here just break the iteration once it reclaims enough pages as what memcg direct reclaim does. This may hurt the fairness among memcgs. But the cached iterator cookie could help to achieve the fairness more or less. Link: http://lkml.kernel.org/r/1548799877-10949-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by: -
Yang Shi authored
mem_cgroup_is_root() is the preferred API to check if memcg is root or not. Use it instead of deferencing css->parent. Link: http://lkml.kernel.org/r/1547232913-118148-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by:
-
