- 21 Nov, 2017 40 commits
-
-
Marcin Nowakowski authored
[ Upstream commit d9b5b658 ] Current init code initialises bootmem allocator with all of the low memory that it assumes is available, but does not check for reserved memory block, which can lead to corruption of data that may be stored there. Move bootmem's allocation map to a location that does not cross any reserved regions Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14609/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chen Gang authored
commit 8f235d1a upstream. __phys_to_pfn and __pfn_to_phys are symmetric, PHYS_PFN and PFN_PHYS are semmetric: - y = (phys_addr_t)x << PAGE_SHIFT - y >> PAGE_SHIFT = (phys_add_t)x - (unsigned long)(y >> PAGE_SHIFT) = x [akpm@linux-foundation.org: use macro arg name `x'] [arnd@arndb.de: include linux/pfn.h for PHYS_PFN definition] Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Marcin Nowakowski <marcin.nowakowski@mips.com> Signed-off-by:
-
Paul Burton authored
[ Upstream commit 08889582 ] When building a kernel targeting a microMIPS ISA, recent GNU linkers will fail the link if they cannot determine that the target of a branch or jump is microMIPS code, with errors such as the following: mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x542c: Unsupported jump between ISA modes; consider recompiling with interlinking enabled. mips-img-linux-gnu-ld: final link failed: Bad value or: ./arch/mips/include/asm/uaccess.h:1017: warning: JALX to a non-word-aligned address Placing anything other than an instruction at the start of a function written in assembly appears to trigger such errors. In order to prepare for allowing us to follow function prologue macros with an EXPORT_SYMBOL invocation, end the prologue macros (LEAD, NESTED & FEXPORT) with a .insn directive. This ensures that the start of the function is marked as code, which always makes sense for functions & safely prevents us from hitting the link errors described above. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14508/Signed-off-by:
-
Jannik Becher authored
[ Upstream commit 502c8074 ] Fixed a sparse warning. Using function le16_to_cpus() to avoid double assignment. Signed-off-by:
Jannik Becher <becher.jannik@gmail.com> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Emil Tantilov authored
[ Upstream commit 1fe954b2 ] FEC is configured by the NVM and the driver should not be overriding it. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Emil Tantilov authored
[ Upstream commit 2bf1a87b ] The indirection table was reported incorrectly for X550 and newer where we can support up to 64 RSS queues. Reported-by Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Tony Nguyen authored
[ Upstream commit 3f0d646b ] A retry count of 10 is likely to run into problems on X550 devices that have to detect and reset unresponsive CS4227 devices. So, reduce the I2C retry count to 3 for X550 and above. This should avoid any possible regressions in existing devices. Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
-
Emil Tantilov authored
[ Upstream commit f7f37e7f ] When an interface is part of a namespace it is possible that ixgbe_close() may be called while __ixgbe_shutdown() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs(). To handle this situation we extend the rtnl_lock() to protect the call to netif_device_detach() and ixgbe_clear_interrupt_scheme() in __ixgbe_shutdown() and check for netif_device_present() to avoid clearing the interrupts second time in ixgbe_close(); Also extend the rtnl lock in ixgbe_resume() to netif_device_attach(). Signed-off-by:
-
Emil Tantilov authored
[ Upstream commit 126db13f ] Make sure that we free the IRQs in ixgbe_io_error_detected() when responding to an PCIe AER error and also restore them when the interface recovers from it. Previously it was possible to trigger BUG_ON() check in free_msix_irqs() in the case where we call ixgbe_remove() after a failed recovery from AER error because the interrupts were not freed. Signed-off-by:
-
Jon Mason authored
[ Upstream commit 0cc878d6 ] Nitro firmware is loaded into memory by the bootloader at a specific location. Set this memory range aside to prevent the kernel from using it. Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Kailang Yang authored
[ Upstream commit 28f1f9b2 ] ALC299 was similar as ALC225. Add headset support for ALC299. ALC3271 was for Dell rename. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Arvind Yadav authored
[ Upstream commit 4b0ea93f ] Here, pci_iomap can fail, handle this case and return -ENOMEM. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483443027-13444-1-git-send-email-arvind.yadav.cs@gmail.comSigned-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 0eb3fba8 ] If adp5520_bl_setup() fails, sysfs group left unremoved. By the way, fix overcomplicated assignement of error code. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit cc21942b ] Once device_register is called for a device its attributes might be accessed. As the callbacks of a lcd device's attributes make use of the lcd_ops, the respective member must be setup before calling device_register. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 874e1f6f ] The pseudo DMA transfer codes in VX222 and VX-pocket driver have a slight bug where they check the buffer boundary wrongly, and may overflow. Also, the zero sample count might be handled badly for the playback (although it shouldn't happen in theory). This patch addresses these issues. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=141541Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit ed3c177d ] The update of stream costs significantly, and we should avoid it unless the stream really has started. Check pipe->running flag instead of pipe->prepared. Signed-off-by:
-
James Smart authored
[ Upstream commit e0165f20 ] Clear the VendorVersion in the PLOGI/PLOGI ACC payload Vendor version info may have been set on fabric login. Before sending PLOGI payloads, ensure that it's cleared. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
James Smart authored
[ Upstream commit e6c6acc0 ] Correct issue leading to oops during link reset. Missing vport pointer. [mkp: fixed typo] Signed-off-by:
-
James Smart authored
[ Upstream commit 6c9231f6 ] Correct host name in symbolic_name field of nameserver registrations Signed-off-by:
-
James Smart authored
[ Upstream commit 104450eb ] FCoE VPort enable-disable does not bring up the VPort. VPI structure needed to be initialized before being re-registered. Signed-off-by:
-
James Smart authored
[ Upstream commit 6b3b3bdb ] On loosely ordered memory systems (PPC for example), the WQE elements were being updated in memory, but not necessarily flushed before the separate doorbell was written to hw which would cause hw to dma the WQE element. Thus, the hardware occasionally received partially updated WQE data. Add the memory barrier after updating the WQE memory. Signed-off-by:
-
Galo Navarro authored
[ Upstream commit 401579c2 ] Several lifecycle events in the rtl8188eu driver are logged using the DBG_88E_LEVEL macro from rtw_debug.h, which is tagged as ERROR regardless of the actual level. Below are dmesg excerpts after loading and unloading the module, the messages are misleading as there was no error. [517434.916239] usbcore: registered new interface driver r8188eu [517435.680653] R8188EU: ERROR indicate disassoc [517437.122606] R8188EU: ERROR assoc success [517797.735611] usbcore: deregistering interface driver r8188eu [517797.736069] R8188EU: ERROR indicate disassoc Remove the ERROR prefix from the logs. After the patch, logs are: [517949.873976] usbcore: registered new interface driver r8188eu [517950.592845] R8188EU: indicate disassoc [517951.993973] R8188EU: assoc success [521778.784448] usbcore: deregistering interface driver r8188eu [521778.784838] R8188EU: indicate disassoc Signed-off-by:
Galo Navarro <anglorvaroa@gmail.com> Signed-off-by:
-
subhashj@codeaurora.org authored
[ Upstream commit 4e768e76 ] UFS device requires to perform bkops (back ground operations) periodically but host can control (via auto-bkops parameter of device) when device can perform bkops based on its performance requirements. In general, host would like to enable the device's auto-bkops only when it's not doing any regular data transfer but sometimes device may not behave properly if host keeps the auto-bkops disabled. This change adds the capability to let the device auto-bkops always enabled except suspend. Reviewed-by:
Sahitya Tummala <stummala@codeaurora.org> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Javier Martinez Canillas authored
[ Upstream commit ab3dabb3 ] If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/scsi/ufs/ufs-qcom.ko | grep alias $ After this patch: $ modinfo drivers/scsi/ufs/ufs-qcom.ko | grep alias alias: of:N*T*Cqcom,ufshcC* alias: of:N*T*Cqcom,ufshc Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by:
-
Hannu Lounento authored
[ Upstream commit 76ed5a8f ] Fix an if statement with hw_dbg lines where the logic was inverted with regards to the corresponding return value used in the if statement. Signed-off-by:
Hannu Lounento <hannu.lounento@ge.com> Signed-off-by:
Peter Senna Tschudin <peter.senna@collabora.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Todd Fujinaka authored
[ Upstream commit 9474933c ] Similar to ixgbe, when an interface is part of a namespace it is possible that igb_close() may be called while __igb_shutdown() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs(). Extend the rtnl_lock() to protect the call to netif_device_detach() and igb_clear_interrupt_scheme() in __igb_shutdown() and check for netif_device_present() to avoid calling igb_clear_interrupt_scheme() a second time in igb_close(). Also extend the rtnl lock in igb_resume() to netif_device_attach(). Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Aaron Sierra authored
[ Upstream commit 18278533 ] Several people have reported firmware leaving the I210/I211 PHY's page select register set to something other than the default of zero. This causes the first accesses, PHY_IDx register reads, to access something else, resulting in device probe failure: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igb: probe of 0000:01:00.0 failed with error -2 This problem began for them after a previous patch I submitted was applied: commit 2a3cdead Author: Aaron Sierra <asierra@xes-inc.com> Date: Tue Nov 3 12:37:09 2015 -0600 igb: Remove GS40G specific defines/functions I personally experienced this problem after attempting to PXE boot from I210 devices using this firmware: Intel(R) Boot Agent GE v1.5.78 Copyright (C) 1997-2014, Intel Corporation Resetting the PHY before reading from it, ensures the page select register is in its default state and doesn't make assumptions about the PHY's register set before the PHY has been probed. Cc: Matwey V. Kornilov <matwey@sai.msu.ru> Cc: Chris Arges <carges@vectranetworks.com> Cc: Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by:
Aaron Sierra <asierra@xes-inc.com> Tested-by:
Matwey V. Kornilov <matwey@sai.msu.ru> Tested-by:
Chris J Arges <christopherarges@gmail.com> Tested-by:
-
Arvind Yadav authored
[ Upstream commit 1ae0d5af ] Here, If devm_ioremap_nocache will fail. It will return NULL. Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by:
Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 62989ceb ] If NO_DMA=y: ERROR: "dma_pool_alloc" [drivers/ata/sata_mv.ko] undefined! ERROR: "dmam_pool_create" [drivers/ata/sata_mv.ko] undefined! ERROR: "dma_pool_free" [drivers/ata/sata_mv.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 2a736e05 ] If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/ata/sata_highbank.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 7bc7ab1e ] If NO_DMA=y: ERROR: "dmam_alloc_coherent" [drivers/ata/libata.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit d97556c8 ] We need to also have OFFPULLUDENABLE bit set to use the off mode pull values. Otherwise the line is pulled down internally if no external pull exists. This is has some documentation at: http://processors.wiki.ti.com/index.php/Optimizing_OMAP35x_and_AM/DM37x_OFF_mode_PAD_configuration Note that the value is still glitchy during off mode transitions as documented in spz319f.pdf "Advisory 1.45". It's best to use external pulls instead of relying on the internal ones for off mode and even then anything pulled up will get driven down momentarily on off mode restore for GPIO banks other than bank1. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 6e613ebf ] It's possible that there are multiple quirks that need to be initialized for the same SoC. Fix the issue by not returning on the first match. Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 1aa09df0 ] Without these changes children of the scn syscon won't probe. Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit f62280ef ] When using 8250_omap driver, we need to specify the right compatible value for the UART to work on dm814x and dm816x. Signed-off-by:
-
Ngai-Mint Kwan authored
[ Upstream commit 2f3fc1e6 ] Multiple IES API resets can cause a race condition where the mailbox interrupt request bits can be cleared before being handled. This can leave certain mailbox messages from the PF to be untreated and the PF will enter in some inactive state. If this situation occurs, the IES API will initiate a mailbox version reset which, then, trigger a mailbox state change. Once this mailbox transition occurs (from OPEN to CONNECT state), a request for reset will be returned. This ensures that PF will undergo a reset whenever IES API encounters an unknown global mailbox interrupt event or whenever the IES API terminates. Signed-off-by:
Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Roger Quadros authored
[ Upstream commit 9fe172b9 ] extcon-palmas must be child of palmas and expects parent's drvdata to be valid. Check for non NULL parent drvdata and fail if it is NULL. Not doing so will result in a NULL pointer dereference later in the probe() parent drvdata is NULL (e.g. misplaced extcon-palmas node in device tree). Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Adam Wallis authored
commit a9df21e3 upstream. Commit adfa543e ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Ideally, this would be cleaned up in the thread handler, but at the very least, the kernel is left in a very precarious scenario that can lead to some long debug sessions when the crash comes later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197605Signed-off-by:
Adam Wallis <awallis@codeaurora.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Leif Liddy authored
commit fd865802 upstream. There's been numerous reported instances where BTUSB_QCA_ROME bluetooth controllers stop functioning upon resume from suspend. These devices seem to be losing power during suspend. Patch will detect a status change on resume and perform a reset. Signed-off-by:
Leif Liddy <leif.linux@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: Kai Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Eric Biggers authored
[ Not upstream because this is a minimal fix for a bug where arm32 kernels can use a much slower implementation of AES than is actually available, potentially forcing vendors to disable encryption on their devices.] All the aes-bs (bit-sliced) and aes-ce (cryptographic extensions) algorithms had a priority of 300. This is undesirable because it means an aes-bs algorithm may be used when an aes-ce algorithm is available. The aes-ce algorithms have much better performance (up to 10x faster). Fix it by decreasing the priority of the aes-bs algorithms to 250. This was fixed upstream by commit cc477bf6 ("crypto: arm/aes - replace bit-sliced OpenSSL NEON code"), but it was just a small part of a complete rewrite. This patch just fixes the priority bug for older kernels. Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org>
-
