- 28 Jan, 2010 8 commits
-
-
Josef Bacik authored
If you have a disk failure in RAID1 and then add a new disk to the array, and then try to remove the missing volume, it will fail. The reason is the sanity check only looks at the total number of rw devices, which is just 2 because we have 2 good disks and 1 bad one. Instead check the total number of devices in the array to make sure we can actually remove the device. Tested this with a failed disk setup and with this test we can now run btrfs-vol -r missing /mount/point and it works fine. Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Josef Bacik authored
Hit this problem while testing RAID1 failure stuff. open_bdev_exclusive returns ERR_PTR(), not NULL. So change the return value properly. This is important if you accidently specify a device that doesn't exist when trying to add a new device to an array, you will panic the box dereferencing bdev. Signed-off-by:
-
Josef Bacik authored
If a RAID setup has chunks that span multiple disks, and one of those disks has failed, btrfs_chunk_readonly will return 1 since one of the disks in that chunk's stripes is dead and therefore not writeable. So instead if we are in degraded mode, return 0 so we can go ahead and allocate stuff. Without this patch all of the block groups in a RAID1 setup will end up read-only, which will mean we can't add new disks to the array since we won't be able to make allocations. Signed-off-by:
-
Josef Bacik authored
This patch revert's commit 6c090a11 Since it introduces this problem where we can run orphan cleanup on a volume that can have orphan entries re-added. Instead of my original fix, Yan Zheng pointed out that we can just revert my original fix and then run the orphan cleanup in open_ctree after we look up the fs_root. I have tested this with all the tests that gave me problems and this patch fixes both problems. Thanks, Signed-off-by:
-
Yang Hongyang authored
In btrfs_init_acl() cloned acl is not released Signed-off-by:
Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit f2bc9dd07e3424c4ec5f3949961fe053d47bc825 Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Date: Wed Jan 20 12:57:53 2010 +0530 Btrfs: Use correct values when updating inode i_size on fallocate Even though we allocate more, we should be updating inode i_size as per the arguments passed Signed-off-by:Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Miao Xie authored
This patch removes tree_search() in extent_map.c because it is not called by anything. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Chris Mason authored
The default btrfs mount -o compress mode will quickly back off compressing a file if it notices that compression does not reduce the size of the data being written. This can save considerable CPU because all future writes to the file go through uncompressed. But some files are both very large and have mixed data stored in them. In that case, we want to add the ability to always try compressing data before writing it. This commit adds mount -o compress-force. A later commit will add a new inode flag that does the same thing. Signed-off-by:
-
- 18 Jan, 2010 7 commits
-
-
Josef Bacik authored
We can race with the unmount of an fs and the stopping of a kthread where we will free the block group before we're done using it. The reason for this is because we do not hold a reference on the block group while its caching, since the allocator drops its reference once it exits or moves on to the next block group. This patch fixes the problem by taking a reference to the block group before we start caching and dropping it when we're done to make sure all accesses to the block group are safe. Thanks, Signed-off-by:
-
Chris Mason authored
It is legal for btrfs_set_acl to be sent a NULL acl. This makes sure we don't dereference it. A similar patch was sent by Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Signed-off-by: -
Josef Bacik authored
Currently orphan cleanup only ever gets triggered if we cross subvolumes during a lookup, which means that if we just mount a plain jane fs that has orphans in it, they will never get cleaned up. This results in panic's like these http://www.kerneloops.org/oops.php?number=1109085 where adding an orphan entry results in -EEXIST being returned and we panic. In order to fix this, we check to see on lookup if our root has had the orphan cleanup done, and if not go ahead and do it. This is easily reproduceable by running this testcase #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <string.h> #include <unistd.h> #include <stdio.h> int main(int argc, char **argv) { char data[4096]; char newdata[4096]; int fd1, fd2; memset(data, 'a', 4096); memset(newdata, 'b', 4096); while (1) { int i; fd1 = creat("file1", 0666); if (fd1 < 0) break; for (i = 0; i < 512; i++) write(fd1, data, 4096); fsync(fd1); close(fd1); fd2 = creat("file2", 0666); if (fd2 < 0) break; ftruncate(fd2, 4096 * 512); for (i = 0; i < 512; i++) write(fd2, newdata, 4096); close(fd2); i = rename("file2", "file1"); unlink("file1"); } return 0; } and then pulling the power on the box, and then trying to run that test again when the box comes back up. I've tested this locally and it fixes the problem. Thanks to Tomas Carnecky for helping me track this down initially. Signed-off-by:
-
Yan, Zheng authored
Fix bug reported by Johannes Hirte. The reason of that bug is btrfs_del_items is called after btrfs_duplicate_item and btrfs_del_items triggers tree balance. The fix is check that case and call btrfs_search_slot when needed. Signed-off-by:
Yan Zheng <zheng.yan@oracle.com> Signed-off-by:
-
Jiri Slaby authored
Stanse found 2 memory leaks in relocate_block_group and __btrfs_map_block. cluster and multi are not freed/assigned on all paths. Fix that. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: linux-btrfs@vger.kernel.org Signed-off-by:
-
Yan, Zheng authored
Some callers of btrfs_ordered_update_i_size can now pass in a NULL for the ordered extent to update against. This makes sure we properly align the offset they pass in when deciding how much to bump the on disk i_size. Signed-off-by: -
Jan Engelhardt authored
parent 49313cdac7b34c9f7ecbb1780cfc648b1c082cd7 (v2.6.32-1-g49313cd) commit ff48c08e1c05c67e8348ab6f8a24de8034e0e34d Author: Jan Engelhardt <jengelh@medozas.de> Date: Wed Dec 9 22:57:36 2009 +0100 Btrfs: fix missing last-entry in readdir(3) When one does a 32-bit readdir(3), the last entry of a directory is missing. This is however not due to passing a large value to filldir, but it seems to have to do with glibc doing telldir or something quirky. In any case, this patch fixes it in practice. Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
-
- 17 Dec, 2009 15 commits
-
-
Chris Mason authored
The recent patch to make fallocate enospc friendly would send down a NULL trans handle to the allocator. This moves the transaction start to properly fix things. Signed-off-by: -
Josef Bacik authored
This patch makes us a bit less zealous about making sure we have enough free metadata space by pearing down the size of new metadata chunks to 256mb instead of 1gb. Also, we used to try an allocate metadata chunks when allocating data, but that sort of thing is done elsewhere now so we can just remove it. With my -ENOSPC test I used to have 3gb reserved for metadata out of 75gb, now I have 1.7gb. Thanks, Signed-off-by:
-
Matthew Wilcox authored
Christoph's patch e244a0ae doesn't display the discard option in /proc/mounts, leading to some confusion for me. Here's the missing bit. Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
-
TARUISI Hiroaki authored
I rebased Christian Parpart's patch to deny hard link across subvolumes. Original patch modifies also btrfs_rename, but I excluded it because we can move across subvolumes now and it make no problem. ----------------- Hard link across subvolumes should not allowed in Btrfs. btrfs_link checks root of 'to' directory is same as root of 'from' file. If not same, btrfs_link returns -EPERM. Signed-off-by:
TARUISI Hiroaki <taruishi.hiroak@jp.fujitsu.com> Signed-off-by:
-
Sage Weil authored
We shouldn't silently ignore unrecognized options. Signed-off-by:
Sage Weil <sage@newdream.net> Signed-off-by:
-
Yan, Zheng authored
If block group 0 is completely free, btrfs_read_block_groups will add extent [0, BTRFS_SUPER_INFO_OFFSET) to the free space cache. Signed-off-by:
-
Yan, Zheng authored
The bytes_used field in root item was originally planned to trace the amount of used data and tree blocks. But it never worked right since we can't trace freeing of data accurately. This patch changes it to only trace the amount of tree blocks. Signed-off-by:
-
Yan, Zheng authored
The check for skip pinned case is wrong, it may breaks the while loop too soon. Signed-off-by:
-
Yan, Zheng authored
iput() can trigger new transactions if we are dropping the final reference, so calling it in btrfs_commit_transaction may end up deadlock. This patch adds delayed iput to avoid the issue. Signed-off-by:
-
Yan, Zheng authored
Pass transaction handle down to security and ACL initialization functions, so we can avoid starting nested transactions Signed-off-by:
-
Yan, Zheng authored
truncating and deleting regular files are unbound operations, so it's not good to do them in a single transaction. This patch makes btrfs_truncate and btrfs_delete_inode start a new transaction after all items in a tree leaf are deleted. Signed-off-by:
-
Yan, Zheng authored
fallocate(2) may allocate large number of file extents, so it's not good to do it in a single transaction. This patch make fallocate(2) start a new transaction for each file extents it allocates. Signed-off-by:
-
Yan, Zheng authored
btrfs_lookup_dentry may trigger orphan cleanup, so it's not good to call it while committing a transaction. Signed-off-by:
-
Yan, Zheng authored
We do log replay in a single transaction, so it's not good to do unbound operations. This patch cleans up orphan inodes cleanup after replaying the log. It also avoids doing other unbound operations such as truncating a file during replaying log. These unbound operations are postponed to the orphan inode cleanup stage. Signed-off-by:
-
Yan, Zheng authored
There are some cases file extents are inserted without involving ordered struct. In these cases, we update disk_i_size directly, without checking pending ordered extent and DELALLOC bit. This patch extends btrfs_ordered_update_i_size() to handle these cases. Signed-off-by:
-
- 16 Dec, 2009 3 commits
-
-
Yan, Zheng authored
Rewrite btrfs_drop_extents by using btrfs_duplicate_item, so we can avoid calling lock_extent within transaction. Signed-off-by:
-
Yan, Zheng authored
btrfs_duplicate_item duplicates item with new key, guaranteeing the source item and the new items are in the same tree leaf and contiguous. It allows us to split file extent in place, without using lock_extent to prevent bookend extent race. Signed-off-by:
-
Yan, Zheng authored
We allow two log transactions at a time, but use same flag to mark dirty tree-log btree blocks. So we may flush dirty blocks belonging to newer log transaction when committing a log transaction. This patch fixes the issue by using two flags to mark dirty tree-log btree blocks. Signed-off-by:
-
- 03 Dec, 2009 1 commit
-
-
Linus Torvalds authored
-
- 02 Dec, 2009 6 commits
-
-
Julia Lawall authored
request_region should be used with release_region, not request_mem_region. Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c, the problem is actually the other way around; request_mem_region should be used instead of request_region. The semantic patch that finds/fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ expression start; @@ request_region(start,...) @b1@ expression r1.start; @@ request_mem_region(start,...) @depends on !b1@ expression r1.start; expression E; @@ - release_mem_region + release_region (start,E) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
TXx9 SPI bit rate is calculated by: fBR = (spi-baseclk) / (n + 1) Fix calculation of min_speed_hz, max_speed_hz and n. Signed-off-by:Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Correct WM831X_MAX_ISEL_VALUE
-
Anisse Astier authored
These laptops often leave i8042 in a wierd state resulting in non- operational touchpad and keyboard. Signed-off-by:
Anisse Astier <anisse@astier.eu> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md: revert incorrect fix for read error handling in raid1.
-
Rusty Russell authored
Jon confirms that recent modprobe will look in /proc/cmdline, so these cmdline options can still be used. See http://bugzilla.kernel.org/show_bug.cgi?id=14164Reported-by:
Adam Williamson <awilliam@redhat.com> Cc: stable@kernel.org Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
