- 06 Apr, 2021 40 commits
-
-
Mauro Carvalho Chehab authored
Changeset 5e4cdca8 ("dt-bindings: i3c: Convert the bus description to yaml") renamed: Documentation/devicetree/bindings/i3c/i3c.txt to: Documentation/devicetree/bindings/i3c/i3c.yaml. Update the cross-references accordingly. Fixes: 5e4cdca8 ("dt-bindings: i3c: Convert the bus description to yaml") Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Changeset bca28426 ("dt-bindings: iommu: mediatek: Convert IOMMU to DT schema") renamed: Documentation/devicetree/bindings/iommu/mediatek,iommu.txt to: Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml. Update the cross-references accordingly. Fixes: bca28426 ("dt-bindings: iommu: mediatek: Convert IOMMU to DT schema") Signed-off-by:
-
Sakari Ailus authored
This part is rather trivial so adding more comments isn't really helpful. Reported-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The IMX258 supports High Dynamic Range with 5 levels of low/high exposure ratio. Add a V4L2 control for HDR (WIDE_DYNAMIC_RANGE). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Lad Prabhakar authored
Move incrementing/decrementing runtime PM count to imx219_start_streaming()/imx219_stop_streaming() functions respectively. This fixes an issue of unbalanced runtime PM count in resume callback error path where streaming is stopped and runtime PM count is left unbalanced. Fixes: 1283b3b8 ("media: i2c: Add driver for Sony IMX219 sensor") Reported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Lad Prabhakar authored
Move out locking/unlocking of vflip and hflip controls from imx219_set_stream() to the imx219_start_streaming()/ imx219_stop_streaming() respectively. This fixes an issue in resume callback error path where streaming is stopped and the controls are left in locked state. Fixes: 1283b3b8 ("media: i2c: Add driver for Sony IMX219 sensor") Reported-by:
-
Sakari Ailus authored
Rename v4l2_async_register_subdev_sensor_common as v4l2_async_register_subdev_sensor. This is a part of the effort to make the long names present in V4L2 fwnode and async frameworks shorter. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Sakari Ailus authored
Rename v4l2_async_notifier_parse_fwnode_sensor_common() as v4l2_async_notifier_parse_fwnode_sensor() and make the function static, as it's not used by a driver and maybe never will. Signed-off-by:
-
Sakari Ailus authored
It was always assumed that walking the media graph would require holding the media_device graph_mutex but this was not documented nor checked for. Add a lockdep check to graph walk init and iter, and document the need for acquiring the graph_mutex. Signed-off-by:
-
Sakari Ailus authored
Acquire the graph_mutex for traversing the media graph. This seems to have been missing all the time. Signed-off-by:
-
Sakari Ailus authored
Acquire the graph_mutex for traversing the media graph. This seems to have been missing all the time. Signed-off-by:
-
Yang Li authored
Fix the following coccicheck warning: ./drivers/media/i2c/ov8865.c:2527:5-8: Unneeded variable: "ret". Return "0" on line 2536 Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Ricardo Ribalda authored
If there in an error during a set_fmt, do not overwrite the previous sizes with the invalid config. Without this patch, v4l2-compliance ends up allocating 4GiB of RAM and causing the following OOPs [ 38.662975] ipu3-imgu 0000:00:05.0: swiotlb buffer is full (sz: 4096 bytes) [ 38.662980] DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:00:05.0 [ 38.663010] general protection fault: 0000 [#1] PREEMPT SMP Cc: stable@vger.kernel.org Fixes: 6d5f26f2 ("media: staging/intel-ipu3-v4l: reduce kernel stack usage") Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
-
Hans Verkuil authored
Fix these kernel-doc warnings: drivers/media/i2c/ccs/ccs-data.h:144: warning: expecting prototype for struct ccs_pdaf_pix_loc_block_desc. Prototype was for struct ccs_pdaf_pix_loc_pixel_desc instead drivers/media/i2c/ccs/ccs-quirk.h:51: warning: Function parameter or member 'post_streamoff' not described in 'ccs_quirk' drivers/media/i2c/ccs/ccs-quirk.h:51: warning: Function parameter or member 'flags' not described in 'ccs_quirk' Signed-off-by:
-
Jia-Ju Bai authored
When __v4l2_ctrl_modify_range() fails, no error return code of imx274_s_frame_interval() is assigned. To fix this bug, ret is assigned with the return valye of __v4l2_ctrl_modify_range(), and then ret is checked. Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Sakari Ailus authored
The driver uses v4l2_get_link_freq() helper to obtain the link frequency using the LINK_FREQ but also the PIXEL_RATE control. The divisor for the pixel rate derived link frequency was wrong, missing the bus uses double data rate. Fix this. Reported-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Sakari Ailus authored
Fix sub-device function for the pixel array and the scaler. It seems that the pixel array had gotten assigned as SCALER whereas the scaler had CAM_SENSOR function. Fix this by setting the pixel array function to CAM_SENSOR and that of scaler to SCALER. Fixes: 9ec2ac9b ("media: ccs: Give all subdevs a function") Signed-off-by:
-
Laurent Pinchart authored
All Linux headers licensed under the GPL-2.0 must include a "WITH Linux-syscall-note" extension in their SPDX license identifier, as enforced by the scripts/headers_install.sh script. Fix the Intel IPU3 UAPI header currently stored with the driver in staging. Signed-off-by:
-
Tom Rix authored
The macro use will already have a semicolon. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Yang Li authored
Eliminate the following coccicheck warning: ./drivers/media/i2c/ov02a10.c:703:2-3: Unneeded semicolon Reported-by:
-
Fabrizio Castro authored
The r8a77965 (a.k.a. R-Car M3-N) device tree schema is compatible with the already documented R-Car Gen3 devices. Document r8a77965 support within renesas,drif.yaml. Signed-off-by:
Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Fabrizio Castro authored
The r8a77990 (a.k.a. R-Car E3) device tree schema is compatible with R-Car H3 and M3-W schema. Document r8a77990 support within renesas,drif.yaml. Signed-off-by:
-
Fabrizio Castro authored
Convert the Renesas DRIF bindings to DT schema and update MAINTAINERS accordingly. Signed-off-by:
-
Fabrizio Castro authored
Add Fabrizio castro and remove Ramesh Shanmugasundaram. Signed-off-by:
Ramesh Shanmugasundaram <rashanmu@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
Some devices reference an output terminal as the source of extension units. This is incorrect, as output terminals only have an input pin, and thus can't be connected to any entity in the forward direction. The resulting topology would cause issues when registering the media controller graph. To avoid this problem, connect the extension unit to the source of the output terminal instead. While at it, and while no device has been reported to be affected by this issue, also handle forward scans where two output terminals would be connected together, and skip the terminals found through such an invalid connection. Reported-and-tested-by:
John Nealy <jnealy3@yahoo.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Laurent Pinchart authored
An error message in the forward scan code incorrectly prints the ID of the source entity instead of the XU entity being scanned. Fix it. Signed-off-by:
-
Laurent Pinchart authored
The CSI-2 receiver requires both its sink pad and its source pad to be connected through enabled links in order to be started. Ensure this by setting the MEDIA_PAD_FL_MUST_CONNECT flag on both pads. Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
The .link_setup() handler uses state->lock to protect the src_sd field. This is only used in mipi_csis_s_stream(), which can't race .link_setup() as the MC core prevents link setup when the pipeline is streaming. Drop the lock. Signed-off-by:
-
Laurent Pinchart authored
If the .s_stream() handler fails after calling pm_runtime_get_sync(), call pm_runtime_put() in the error path. While at it add a few blank lines to make the code more readable. Signed-off-by:
-
Laurent Pinchart authored
Expand the description of the binding itself and of individual properties to include additional information that may not be immediately appartent from reading the reference manual. Drop the last sentence of the phy-supply description that refers to the driver's implementation. While at it, fix the capitalization of MIPI CSI-2 in the title. Signed-off-by:
-
Laurent Pinchart authored
DT bindings examples are customarily indented with 4 spaces. Signed-off-by:
-
Laurent Pinchart authored
The fsl,csis-hs-settle property isn't used by the driver anymore. Drop it. Signed-off-by:
-
Laurent Pinchart authored
The reset-names property is incorrect, as it references the reset of the MIPI D-PHY master, which is used by the DSI controller. Fixing the property name would create backward-compatibility issues. As the device has a single reset, we can instead drop reset-names completely, which also simplifies the binding. Fix the example accordingly to use the correct reset. Signed-off-by:
-
Hans Verkuil authored
The EDID had a few mistakes as reported by edid-decode: Block 1, CTA-861 Extension Block: Video Data Block: For improved preferred timing interoperability, set 'Native detailed modes' to 1. Video Capability Data Block: S_PT is equal to S_IT and S_CE, so should be set to 0 instead. Fixed those. Signed-off-by:
-
Muhammad Usama Anjum authored
If some error occurs, URB buffers should also be freed. If they aren't freed with the dvb here, the em28xx_dvb_fini call doesn't frees the URB buffers as dvb is set to NULL. The function in which error occurs should do all the cleanup for the allocations it had done. Tested the patch with the reproducer provided by syzbot. This patch fixes the memleak. Reported-by: syzbot+889397c820fa56adf25d@syzkaller.appspotmail.com Signed-off-by:
Muhammad Usama Anjum <musamaanjum@gmail.com> Signed-off-by:
-
Bhaskar Chowdhury authored
s/sillicon/silicon/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Bhaskar Chowdhury authored
s/cariers/carriers/ Signed-off-by:
-
Xiaofeng Cao authored
change 'vodeo' to 'video' change 'nevery' to 'never' change 'is' to 'it' change 'connevted' to 'connected' change 'swichers' to 'switchers' change 'strucure' to 'structure' change 'unblanced' to 'unbalanced' change 'fonctionality' to 'functionality' Signed-off-by:
Xiaofeng Cao <caoxiaofeng@yulong.com> Acked-by:
-
Hans Verkuil authored
The EDID failed with two edid-decode warnings: Block 1, CTA-861 Extension Block: Video Data Block: VIC 16 is the preferred timing, overriding the first detailed timings. Is this intended? Video Capability Data Block: S_PT is equal to S_IT and S_CE, so should be set to 0 instead. In addition, the first DTD had a wrong vsync value (6 instead of 5). Signed-off-by:
-
Hans Verkuil authored
Trivial fixes for many kernel-doc warnings. Most of the comments before enums or struct can just be that: regular comments. So just change /** to /*. In one remaining case it was just a wrong construct: @mem_dev[] -> @mem_dev Signed-off-by:
-
