Pull NVMe changes for 5.1 from Christoph

* 'nvme-5.1' of git://git.infradead.org/nvme: (22 commits)
  nvme-rdma: use nr_phys_segments when map rq to sgl
  nvmet: convert to SPDX identifiers
  nvmet-rdma: convert to SPDX identifiers
  nvme-loop: convert to SPDX identifiers
  nvmet-fcloop: convert to SPDX identifiers
  nvmet-fc: convert to SPDX identifiers
  nvme: convert to SPDX identifiers
  nvme-pci: convert to SPDX identifiers
  nvme-lightnvm: convert to SPDX identifiers
  nvme-rdma: convert to SPDX identifiers
  nvme-fc: convert to SPDX identifiers
  nvme-fabrics: convert to SPDX identifiers
  nvme-tcp.h: fix SPDX header
  nvme_ioctl.h: remove duplicate GPL boilerplate
  nvme: return error from nvme_alloc_ns()
  nvme: avoid that deleting a controller triggers a circular locking complaint
  nvme: introduce a helper function for controller deletion
  nvme: unexport nvme_delete_ctrl_sync()
  nvme-pci: check kstrtoint() return value in queue_count_set()
  nvme-fabrics: document the poll function argument
  ...

Use blk_rq_nr_phys_segments() instead of blk_rq_payload_bytes() to check
if a command contains data to be mapped.  This fixes the case where
a struct request contains LBAs, but it has no payload, such as
Write Zeroes support.

Fixes: 6e02318e ("nvme: add support for the Write Zeroes command")
Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

For .h files we need to use /* */ style comments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

We already have a ЅPDX header, so no need to duplicate the information.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

nvme_alloc_ns() might fail, so we should be returning an error code.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Rework nvme_delete_ctrl_sync() such that it does not have to wait for
queued work. This patch avoids that test nvme/008 triggers the following
complaint:

WARNING: possible circular locking dependency detected
5.0.0-rc6-dbg+ #10 Not tainted
------------------------------------------------------
nvme/7918 is trying to acquire lock:
000000009a1a7b69 ((work_completion)(&ctrl->delete_work)){+.+.}, at: __flush_work+0x379/0x410

but task is already holding lock:
00000000ef5a45b4 (kn->count#389){++++}, at: kernfs_remove_self+0x196/0x210

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (kn->count#389){++++}:
       lock_acquire+0xc5/0x1e0
       __kernfs_remove+0x42a/0x4a0
       kernfs_remove_by_name_ns+0x45/0x90
       remove_files.isra.1+0x3a/0x90
       sysfs_remove_group+0x5c/0xc0
       sysfs_remove_groups+0x39/0x60
       device_remove_attrs+0x68/0xb0
       device_del+0x24d/0x570
       cdev_device_del+0x1a/0x50
       nvme_delete_ctrl_work+0xbd/0xe0
       process_one_work+0x4f1/0xa40
       worker_thread+0x67/0x5b0
       kthread+0x1cf/0x1f0
       ret_from_fork+0x24/0x30

-> #0 ((work_completion)(&ctrl->delete_work)){+.+.}:
       __lock_acquire+0x1323/0x17b0
       lock_acquire+0xc5/0x1e0
       __flush_work+0x399/0x410
       flush_work+0x10/0x20
       nvme_delete_ctrl_sync+0x65/0x70
       nvme_sysfs_delete+0x4f/0x60
       dev_attr_store+0x3e/0x50
       sysfs_kf_write+0x87/0xa0
       kernfs_fop_write+0x186/0x240
       __vfs_write+0xd7/0x430
       vfs_write+0xfa/0x260
       ksys_write+0xab/0x130
       __x64_sys_write+0x43/0x50
       do_syscall_64+0x71/0x210
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(kn->count#389);
                               lock((work_completion)(&ctrl->delete_work));
                               lock(kn->count#389);
  lock((work_completion)(&ctrl->delete_work));

 *** DEADLOCK ***

3 locks held by nvme/7918:
 #0: 00000000e2223b44 (sb_writers#6){.+.+}, at: vfs_write+0x1eb/0x260
 #1: 000000003404976f (&of->mutex){+.+.}, at: kernfs_fop_write+0x128/0x240
 #2: 00000000ef5a45b4 (kn->count#389){++++}, at: kernfs_remove_self+0x196/0x210

stack backtrace:
CPU: 4 PID: 7918 Comm: nvme Not tainted 5.0.0-rc6-dbg+ #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
 dump_stack+0x86/0xca
 print_circular_bug.isra.36.cold.54+0x173/0x1d5
 check_prev_add.constprop.45+0x996/0x1110
 __lock_acquire+0x1323/0x17b0
 lock_acquire+0xc5/0x1e0
 __flush_work+0x399/0x410
 flush_work+0x10/0x20
 nvme_delete_ctrl_sync+0x65/0x70
 nvme_sysfs_delete+0x4f/0x60
 dev_attr_store+0x3e/0x50
 sysfs_kf_write+0x87/0xa0
 kernfs_fop_write+0x186/0x240
 __vfs_write+0xd7/0x430
 vfs_write+0xfa/0x260
 ksys_write+0xab/0x130
 __x64_sys_write+0x43/0x50
 do_syscall_64+0x71/0x210
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This patch does not change any functionality but makes the next patch
in this series easier to read.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Since nvme_delete_ctrl_sync() is not called from any other kernel module,
unexport it.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This patch avoids that the compiler complains about 'ret' being set
but not being used when building with W=1.

Fixes: 3b6592f7 ("nvme: utilize two queue maps, one for reads and one for writes") # v5.0-rc1
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This patch avoids that the kernel-doc tool reports a warning when
building with W=1.

Fixes: 26c68227 ("nvme-fabrics: allow nvmf_connect_io_queue to poll") # v5.0-rc1
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This patch avoids that smatch complains about inconsistent indentation.

Fixes: a07b4970 ("nvmet: add a generic NVMe target") # v4.10
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Implement a simple round-robin I/O policy for multipathing.  Path
selection is done in two rounds, first iterating across all optimized
paths, and if that doesn't return any valid paths, iterate over all
optimized and non-optimized paths.  If no paths are found, use the
existing algorithm.  Also add a sysfs attribute 'iopolicy' to switch
between the current NUMA-aware I/O policy and the 'round-robin' I/O
policy.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

rq->bio can be NULL sometimes, such as flush request, so don't
read bio->bi_seg_front_size until this 'bio' is checked as valid.

Cc: Bart Van Assche <bvanassche@acm.org>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Fixes: dcebd755 ("block: use bio_for_each_bvec() to compute multi-page bvec count")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull in 5.0-rc6 to avoid a dumb merge conflict with fs/iomap.c.
This is needed since io_uring is now based on the block branch,
to avoid a conflict between the multi-page bvecs and the bits
of io_uring that touch the core block parts.

* tag 'v5.0-rc6': (525 commits)
  Linux 5.0-rc6
  x86/mm: Make set_pmd_at() paravirt aware
  MAINTAINERS: Update the ocores i2c bus driver maintainer, etc
  blk-mq: remove duplicated definition of blk_mq_freeze_queue
  Blk-iolatency: warn on negative inflight IO counter
  blk-iolatency: fix IO hang due to negative inflight counter
  MAINTAINERS: unify reference to xen-devel list
  x86/mm/cpa: Fix set_mce_nospec()
  futex: Handle early deadlock return correctly
  futex: Fix barrier comment
  net: dsa: b53: Fix for failure when irq is not defined in dt
  blktrace: Show requests without sector
  mips: cm: reprime error cause
  mips: loongson64: remove unreachable(), fix loongson_poweroff().
  sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
  geneve: should not call rt6_lookup() when ipv6 was disabled
  KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)
  KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)
  kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)
  signal: Better detection of synchronous signals
  ...

QUEUE_FLAG_NO_SG_MERGE has been killed, so kill BLK_MQ_F_SG_MERGE too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Since bdced438 ("block: setup bi_phys_segments after splitting"),
physical segment number is mainly figured out in blk_queue_split() for
fast path, and the flag of BIO_SEG_VALID is set there too.

Now only blk_recount_segments() and blk_recalc_rq_segments() use this
flag.

Basically blk_recount_segments() is bypassed in fast path given BIO_SEG_VALID
is set in blk_queue_split().

For another user of blk_recalc_rq_segments():

- run in partial completion branch of blk_update_request, which is an unusual case

- run in blk_cloned_rq_check_limits(), still not a big problem if the flag is killed
since dm-rq is the only user.

Multi-page bvec is enabled now, not doing S/G merging is rather pointless with the
current setup of the I/O path, as it isn't going to save you a significant amount
of cycles.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Now multi-page bvec is supported, some helpers may return page by
page, meantime some may return segment by segment, this patch
documents the usage.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Now multi-page bvec can cover CONFIG_THP_SWAP, so we don't need to
increase BIO_MAX_PAGES for it.

CONFIG_THP_SWAP needs to split one THP into normal pages and adds
them all to one bio. With multipage-bvec, it just takes one bvec to
hold them all.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This patch pulls the trigger for multi-page bvecs.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This patch introduces one extra iterator variable to bio_for_each_segment_all(),
then we can allow bio_for_each_segment_all() to iterate over multi-page bvec.

Given it is just one mechannical & simple change on all bio_for_each_segment_all()
users, this patch does tree-wide change in one single patch, so that we can
avoid to use a temporary helper for this conversion.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bch_bio_alloc_pages() is always called on one new bio, so it is safe
to access the bvec table directly. Given it is the only kind of this
case, open code the bvec table access since bio_for_each_segment_all()
will be changed to support for iterating over multipage bvec.
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

iov_iter is implemented on bvec itererator helpers, so it is safe to pass
multi-page bvec to it, and this way is much more efficient than passing one
page in each bvec.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Preparing for supporting multi-page bvec.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Once multi-page bvec is enabled, the last bvec may include more than one
page, this patch use mp_bvec_last_segment() to truncate the bio.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

BTRFS and guard_bio_eod() need to get the last singlepage segment
from one multipage bvec, so introduce this helper to make them happy.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It is more efficient to use bio_for_each_bvec() to map sg, meantime
we have to consider splitting multipage bvec as done in blk_bio_segment_split().
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

First it is more efficient to use bio_for_each_bvec() in both
blk_bio_segment_split() and __blk_recalc_rq_segments() to compute how
many multi-page bvecs there are in the bio.

Secondly once bio_for_each_bvec() is used, the bvec may need to be
splitted because its length can be very longer than max segment size,
so we have to split the big bvec into several segments.

Thirdly when splitting multi-page bvec into segments, the max segment
limit may be reached, so the bio split need to be considered under
this situation too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bio_for_each_bvec() is used for iterating over multi-page bvec for bio
split & merge code.

rq_for_each_bvec() can be used for drivers which may handle the
multi-page bvec directly, so far loop is one perfect use case.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This patch introduces helpers of 'mp_bvec_iter_*' for multi-page bvec
support.

The introduced helpers treate one bvec as real multi-page segment,
which may include more than one pages.

The existed helpers of bvec_iter_* are interfaces for supporting current
bvec iterator which is thought as single-page by drivers, fs, dm and
etc. These introduced helpers will build single-page bvec in flight, so
this way won't break current bio/bvec users, which needn't any change.

Follows some multi-page bvec background:

- bvecs stored in bio->bi_io_vec is always multi-page style

- bvec(struct bio_vec) represents one physically contiguous I/O
  buffer, now the buffer may include more than one page after
  multi-page bvec is supported, and all these pages represented
  by one bvec is physically contiguous. Before multi-page bvec
  support, at most one page is included in one bvec, we call it
  single-page bvec.

- .bv_page of the bvec points to the 1st page in the multi-page bvec

- .bv_offset of the bvec is the offset of the buffer in the bvec

The effect on the current drivers/filesystem/dm/bcache/...:

- almost everyone supposes that one bvec only includes one single
  page, so we keep the sp interface not changed, for example,
  bio_for_each_segment() still returns single-page bvec

- bio_for_each_segment_all() will return single-page bvec too

- during iterating, iterator variable(struct bvec_iter) is always
  updated in multi-page bvec style, and bvec_iter_advance() is kept
  not changed

- returned(copied) single-page bvec is built in flight by bvec
  helpers from the stored multi-page bvec
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>