- 25 Apr, 2022 33 commits
-
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: The firmware ready (fw_ready) message is sent by the firmware to notify the host that it has been booted up and caries additional information about it's configuration. All of this is IPC specific, the message itself is IPC version specific and the information itself also. Move the code to handle the fw_ready message under ipc3.c since the parsing and interpretation is IPC specific. A followup series is going to take care of the rest of the loader.c to make it IPC agnostic.
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: This adds SOC_DOUBLE_R_S_EXT_TLV and SOC_SINGLE_S_EXT_TLV macros for signed TLV controls that need custom get/put callbacks. These will be needed by future Cirrus codec drivers, but are not particularly exotic so could be useful for others.
-
Mark Brown authored
Merge series from Stephen Kitt <steve@sk2.org>: This series covers all the remaining changes to migrate sound/soc/codecs i2c probes to probe_new, where the const struct i2c_client * argument is still used. Instead of relying on the parameter passed in, i2c_match_id is used instead. With this set of patches, all the sound/soc/codecs i2c probes use the new probe definition. Changes since v1: two missing files were added. Stephen Kitt (7): ASoC: ak*: use i2c_match_id and simple i2c probe ASoC: alc56*: use i2c_match_id and simple i2c probe ASoC: max980*: use i2c_match_id and simple i2c probe ASoC: pcm186x: use i2c_match_id and simple i2c probe ASoC: tas*: use i2c_match_id and simple i2c probe ASoC: tlv320*: use i2c_match_id and simple i2c probe ASoC: tpa6130: use i2c_match_id and simple i2c probe sound/soc/codecs/ak4613.c | 10 +++++---- sound/soc/codecs/ak4642.c | 8 ++++--- sound/soc/codecs/alc5623.c | 24 +++++++++++---------- sound/soc/codecs/alc5632.c | 20 +++++++++-------- sound/soc/codecs/max98088.c | 21 +++++++++--------- sound/soc/codecs/max98090.c | 23 ++++++++++---------- sound/soc/codecs/max98095.c | 19 +++++++++-------- sound/soc/codecs/pcm186x-i2c.c | 24 ++++++++++----------- sound/soc/codecs/tas2562.c | 25 +++++++++++----------- sound/soc/codecs/tas571x.c | 11 ++++++---- sound/soc/codecs/tas5720.c | 21 +++++++++--------- sound/soc/codecs/tlv320adc3xxx.c | 21 +++++++++--------- sound/soc/codecs/tlv320aic31xx.c | 32 ++++++++++++++-------------- sound/soc/codecs/tlv320aic32x4-i2c.c | 11 ++++++---- sound/soc/codecs/tlv320aic3x-i2c.c | 25 +++++++++++----------- sound/soc/codecs/tpa6130a2.c | 19 +++++++++-------- 16 files changed, 168 insertions(+), 146 deletions(-) base-commit: 5d763a740e5b24e4a2ca04317255e7e941876338 -- 2.27.0
-
Mark Brown authored
Merge series from Tinghan Shen <tinghan.shen@mediatek.com>: Add support of MediaTek mt8186 SoC DSP to SOF.
-
Tinghan Shen authored
Add DSP system PM callback for suspend and resume Signed-off-by:
Allen-KH Cheng <allen-kh.cheng@mediatek.com> Signed-off-by:
Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Yaochun Hung <yc.hung@mediatek.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220422055659.8738-5-tinghan.shen@mediatek.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Tinghan Shen authored
Add adsp clock on/off support on mt8186 SoC. Signed-off-by:
-
Tinghan Shen authored
Add mt8186-loader module with ops callback to load and run firmware on mt8186 SoC. Signed-off-by:
-
Tinghan Shen authored
Add support of SOF on Mediatek mt8186 SoC. MT8186 has 2 Cortex A76 cores paired with 6 Cortex A55 cores. It also has Cadence HiFi-5 DSP single core. The IPC communication between AP and DSP is based on shared DRAM and mailbox interrupt. Signed-off-by:
-
Minghao Chi authored
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220414085310.2541546-1-chi.minghao@zte.com.cnSigned-off-by:
-
Minghao Chi authored
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by:
-
Judy Hsiao authored
Both MCLK and BCLK can be the clock source of sysclk via PLL according to its datasheet. This patch sets MCLK as the clock source as we use MCLK in the previous projects. Fixes: c5198db8 ("ASoC: qcom: Add driver support for ALC5682I-VS") Signed-off-by:
Judy Hsiao <judyhsiao@chromium.org> Link: https://lore.kernel.org/r/20220419062952.356017-1-judyhsiao@chromium.orgSigned-off-by:
-
Haowen Bai authored
No need to add null check before call of_node_put(), since the implementation of of_node_put() has done it. Signed-off-by:
Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1650509120-25377-1-git-send-email-baihaowen@meizu.comSigned-off-by:
-
Amadeusz Sławiński authored
In order to enable NHLT support one must select SND_INTEL_DSP_CONFIG, which will select SND_INTEL_NHLT. Otherwise the file containing NHLT code doesn't get build leading to errors when linking. Fixes: 274d79e5 ("ASoC: Intel: avs: Configure modules according to their type") Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20220425091646.545216-2-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Amadeusz Sławiński authored
Only supported platform for AVS are x86 machines, so there is no reason for it to be enabled on other architectures. Allow exception for compile tests. Fixes: 274d79e5 ("ASoC: Intel: avs: Configure modules according to their type") Reviewed-by:
-
Minghao Chi authored
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by:
-
Minghao Chi authored
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by:
-
Richard Fitzgerald authored
Change the order of members in struct cs_dsp_coeff_ctl to avoid the compiler having to insert alignment padding bytes. On a x86_64 build this saves 16 bytes per control. - Pointers are collected to the top of the struct (with the exception of priv, as noted below), so that they are inherently aligned. - The set and enable bitflags are placed together so they can be merged. - priv is placed at the end of the struct - it is for use by the client so it is helpful to make it stand out, and since the compiler will always pad the struct size to an alignment multiple putting a pointer last won't introduce any more padding. - struct cs_dsp_alg_region is placed at the end, right before priv, for the same reasoning as priv. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220425095159.3044527-1-rf@opensource.cirrus.comSigned-off-by:
-
Biju Das authored
The SSI block is identical on Renesas RZ/G2L, RZ/G2UL and RZ/V2L SoC's, so instead of adding dependency for each SoC's add dependency on ARCH_RZG2L. The ARCH_RZG2L config option is already selected by ARCH_R9A07G043, ARCH_R9A07G044 and ARCH_R9A07G054. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220423164443.146299-1-biju.das.jz@bp.renesas.comSigned-off-by:
-
Minghao Chi authored
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by:
-
Stephen Kitt authored
As part of the ongoing i2c transition to the simple probe ("probe_new"), this patch uses i2c_match_id to retrieve the driver_data for the probed device. The id parameter is thus no longer necessary and the simple probe can be used instead. In the context of an i2c probe, i2c_match_id with the module id table and the probed client never returns null, so removing the null check on the i2c_device_id pointer is safe. The i2c id tables are moved up before the probe function, as suggested by Wolfram Sang, except where the existing code already had a declaration for the of_device_id table. Signed-off-by:Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20220415160613.148882-7-steve@sk2.orgSigned-off-by:
-
Stephen Kitt authored
As part of the ongoing i2c transition to the simple probe ("probe_new"), this patch uses i2c_match_id to retrieve the driver_data for the probed device. The id parameter is thus no longer necessary and the simple probe can be used instead. The i2c id tables are moved up before the probe function, as suggested by Wolfram Sang, except where the existing code already had a declaration for the of_device_id table. Signed-off-by: -
Stephen Kitt authored
As part of the ongoing i2c transition to the simple probe ("probe_new"), this patch uses i2c_match_id to retrieve the driver_data for the probed device. The id parameter is thus no longer necessary and the simple probe can be used instead. The i2c id table is moved up before the probe function, as suggested by Wolfram Sang. Signed-off-by: -
Stephen Kitt authored
As part of the ongoing i2c transition to the simple probe ("probe_new"), this patch uses i2c_match_id to retrieve the driver_data for the probed device. The id parameter is thus no longer necessary and the simple probe can be used instead. In the context of an i2c probe, i2c_match_id with the module id table and the probed client never returns null, so removing the null check on the i2c_device_id pointer is safe. The i2c id tables are moved up before the probe function, as suggested by Wolfram Sang. Signed-off-by: -
Stephen Kitt authored
As part of the ongoing i2c transition to the simple probe ("probe_new"), this patch uses i2c_match_id to retrieve the driver_data for the probed device. The id parameter is thus no longer necessary and the simple probe can be used instead. The i2c id tables are moved up before the probe function, as suggested by Wolfram Sang. Signed-off-by: -
Stephen Kitt authored
As part of the ongoing i2c transition to the simple probe ("probe_new"), this patch uses i2c_match_id to retrieve the driver_data for the probed device. The id parameter is thus no longer necessary and the simple probe can be used instead. Signed-off-by: -
Peter Ujfalusi authored
The fw_ready is handled internally to ipc3, we can remove the old code from the loader.c along with the functions only used by the fw_ready() Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Ajit Pandey <ajitkumar.pandey@amd.com> Reviewed-by:
Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20220421080735.31698-7-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Peter Ujfalusi authored
The fw_ready is handled internally to ipc3 and the callback no longer in use. Signed-off-by:
-
Peter Ujfalusi authored
The fw_ready is handled internally to ipc3 and the callback no longer in use. Signed-off-by:
-
Peter Ujfalusi authored
The fw_ready is handled internally to ipc3 and the callback no longer in use. Signed-off-by:
-
Peter Ujfalusi authored
The fw_ready is handled internally to ipc3, the callback no longer in use and it is going to be removed. Signed-off-by:
-
Peter Ujfalusi authored
The handling of fw_ready is IPC3 specific, move the needed code from the loader.c to ipc3.c and stop using the sof_ops(sdev)->fw_ready() callback. Signed-off-by:
-
Richard Fitzgerald authored
Add a SOC_SINGLE_S_EXT_TLV macro as a convenience wrapper around SOC_DOUBLE_R_S_EXT_TLV for mono volume controls. Signed-off-by:
-
Simon Trimmer authored
A straightforward extension of the SOC_DOUBLE_R_S_TLV() macro that allows the get and put functions to be customised. Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by:
-
- 22 Apr, 2022 7 commits
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Add two PCI IDs and quirks for APL Chromebooks and Intel IPC4 selection for developers.
-
Pierre-Louis Bossart authored
cppcheck throws the following warning: sound/soc/soc-core.c:2773:6: style: Condition '!num_widgets' is always false [knownConditionTrueFalse] if (!num_widgets) { ^ sound/soc/soc-core.c:2761:18: note: Assuming that condition 'num_widgets<0' is not redundant if (num_widgets < 0) { ^ sound/soc/soc-core.c:2766:18: note: Assuming condition is false if (num_widgets & 1) { ^ sound/soc/soc-core.c:2772:2: note: Compound assignment '/=', assigned value is 0 num_widgets /= 2; ^ We should check upfront all error conditions. Signed-off-by:Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
-
Peter Ujfalusi authored
The sequence for IMR boot is essentially the same as normal boot with the difference that instead of DMA from host the firmware is loaded from IMR. Re-structure the code to use the existing sequence and also add fallback handling in case the IMR boot fails. Introduce a new flag to make the IMR boot support check simpler. Reviewed-by:
-
Pierre-Louis Bossart authored
The existing code does an init/free for each piece of information needed. We can instead initialize the NHLT table in the .probe() and free it in the .remove() callback. Signed-off-by:
-
Peter Ujfalusi authored
The 'w' (struct snd_soc_dapm_widget) is not changing within the function, there is no reason to check the w->sname more than once as it is not going to change. Reviewed-by:
-
Pierre-Louis Bossart authored
There is no need to assign spcm to NULL. Removing this assignment also removes a false alarm reported by cppcheck. Signed-off-by:
-
Gongjun Song authored
Add PCI DID for Intel Raptor Lake P. Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
Gongjun Song <gongjun.song@intel.com> Signed-off-by:
-
