- 14 Jun, 2021 3 commits
-
-
Yang Li authored
Eliminate the following coccicheck warning: ./sound/soc/codecs/wcd-mbhc-v2.c:990:2-3: Unneeded semicolon. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1623221171-105359-1-git-send-email-yang.lee@linux.alibaba.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Srinivasa Rao Mandadapu authored
The DMA interrupt clear register overwritten during simultaneous playback and capture in lpass platform interrupt handler. It's causing playback or capture stuck in similtaneous plaback on speaker and capture on dmic test. Update appropriate reg fields of corresponding channel instead of entire register write. Fixes: commit c5c8635a ("ASoC: qcom: Add LPASS platform driver") Signed-off-by:
Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Reviewed-by:
-
Mark Brown authored
Merge tag 'asoc-hdmi-codec-improvements-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into asoc-5.14 Improvements to the hdmi-codec driver and ALSA infrastructure around it to support the HDMI Channel Mapping and IEC958 controls
-
- 10 Jun, 2021 2 commits
-
-
Maxime Ripard authored
The IEC958 status bit is usually set by the userspace after hw_params has been called, so in order to use whatever is set by the userspace, we need to implement the prepare hook. Let's add it to the hdmi_codec_ops, and mandate that either prepare or hw_params is implemented. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
-
Maxime Ripard authored
The IEC958 status bits can be exposed and modified by the userspace through dedicated ALSA controls. This patch implements those controls for the hdmi-codec driver. It relies on a default value being setup at probe time that can later be overridden by the control put. The hw_params callback is then called with a buffer filled with the proper bits for the current parameters being passed on so the underlying driver can just reuse those bits as is. Signed-off-by:
-
- 08 Jun, 2021 6 commits
-
-
Maxime Ripard authored
We're going to add more controls to support the IEC958 output, so let's rework the control registration a bit to support more of them. Signed-off-by:
-
Maxime Ripard authored
In some situations, like a codec probe, we need to provide an IEC status default but don't have access to the sampling rate and width yet since no stream has been configured yet. Each and every driver has its own default, whereas the core iec958 code also has some buried in the snd_pcm_create_iec958_consumer functions. Let's split these functions in two to provide a default that doesn't rely on the sampling rate and width, and another function to fill them when available. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20210525132354.297468-3-maxime@cerno.tech
-
Maxime Ripard authored
The doc currently mentions that the IEC958 Playback Default should be exposed on the PCM iface, and the Playback Mask on the mixer iface. It's a bit confusing to advise to have two related controls on two separate ifaces, and it looks like the drivers that currently expose those controls use any combination of the mixer and PCM ifaces. Let's try to clarify the situation a bit, and encourage to at least have the controls on the same iface. Signed-off-by:
-
Wan Jiabing authored
Fix following coccicheck warning: ./sound/soc/codecs/wcd934x.c:5136:2-3: Unneeded semicolon ./sound/soc/codecs/wcd934x.c:2466:2-3: Unneeded semicolon ./sound/soc/codecs/wcd934x.c:2527:2-3: Unneeded semicolon Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20210608030656.24052-1-wanjiabing@vivo.comSigned-off-by:
-
Kuninori Morimoto authored
snd_soc_runtime_get_dai_fmt() is using discriminatory terms. This patch fixup it. Fixes: ba9e82a1 ("ASoC: soc-core: add snd_soc_runtime_get_dai_fmt()") Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/874ke9dxkp.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Christophe JAILLET authored
If an error occurs after a successful 'of_iomap()' call, it must be undone by a corresponding 'iounmap()' call, as already done in the remove function. While at it, remove the useless initialization of 'ret' at the beginning of the function. Fixes: 4bd8597d ("ASoC: mediatek: add btcvsd driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/0c2ba562c3364e61bfbd5b3013a99dfa0d9045d7.1622989685.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
- 07 Jun, 2021 11 commits
-
-
Mark Brown authored
Merge series "ASoC: adds new .auto_selectable_formats support" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These are v3 of "ASoC: adds new .get_fmt support", but renamed Subject. This is a little bit challenging patch-set. The idea/code is almost same as v1 / v2. v3 has "priority" support. We need to set dai_link->dai_fmt to select CPU/Codec settings, and it is selected by Sound Card Driver, today. Because of it, Sound Card user need to know both CPU / Codec available dai_fmt, and needs to select it. For example simple-card / audio-graph case, it is selected by "format" and "bitclock/frame-master/inversion" on DT. But, it can be automatically selected if both CPU and Codec drivers indicate it to ALSA SoC Framework, somehow. By this patch, dai_fmt can be automatically selected from each driver if both CPU / Codec driver had .auto_selectable_formats. Automatically selectable *field* is depends on each drivers. For example, some driver want to select format "automatically", but want to select other fields "manually", because of complex limitation. Or other example, in case of both CPU and Codec are possible to be clock provider, but the quality was different. In these case, user need/want to *manually* select each fields from Sound Card driver. It uses Sound Card specified fields preferentially, and try to select non-specific fields from CPU and Codec driver settings if driver had .auto_selectable_formats. In other words, we can select all dai_fmt via Sound Card driver same as before. Select dai_fmt 100% automatically is very difficult and will be very complex, but select automatically some fields only is very easy, I guess. This patch-set is based on such assumption. v1 -> v2 - Add more detail explanation on git-log, code, comment. - Possible to be Clock/Frame provider is depends on driver's situation. v2 -> v3 - has priority - tidyup function explanation for snd_soc_dai_get_fmt() - Each driver don't try to have SND_SOC_DAIFMT_CBx_CFx to avoid confusion Link: https://lore.kernel.org/r/871rb3hypy.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871racbx0w.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (7): ASoC: soc-core: move snd_soc_runtime_set_dai_fmt() to upside ASoC: soc-core: add snd_soc_runtime_get_dai_fmt() ASoC: ak4613: add .auto_selectable_formats support ASoC: pcm3168a: add .auto_selectable_formats support ASoC: rsnd: add .auto_selectable_formats support ASoC: fsi: add .auto_selectable_formats support ASoC: hdmi-codec: add .auto_selectable_formats support include/sound/soc-dai.h | 55 +++++++ sound/soc/codecs/ak4613.c | 11 ++ sound/soc/codecs/hdmi-codec.c | 21 +++ sound/soc/codecs/pcm3168a.c | 26 +++ sound/soc/sh/fsi.c | 15 ++ sound/soc/sh/rcar/core.c | 31 +++- sound/soc/soc-core.c | 288 ++++++++++++++++++++++++++-------- sound/soc/soc-dai.c | 63 ++++++++ sound/soc/soc-utils.c | 29 ++++ 9 files changed, 475 insertions(+), 64 deletions(-) -- 2.25.1
-
Colin Ian King authored
The pointer node is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. The function is missing a of_node_put on node, fix this by adding the call before returning. Addresses-Coverity: ("Unused value") Fixes: 0d6a04da ("ASoC: Add Rockchip rk817 audio CODEC support") Signed-off-by:Colin Ian King <colin.king@canonical.com> Tested-by:
Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20210603113659.82031-1-colin.king@canonical.comSigned-off-by:
-
Jiapeng Chong authored
Fix the following coccicheck warnings: ./sound/soc/codecs/rk817_codec.c:49:2-3: Unneeded semicolon. Reported-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/1622802209-45031-1-git-send-email-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Mark Brown authored
Merge tag 'tb-mfd-asoc-v5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into asoc-5.14 Immutable branch between MFD and ASoC due for the v5.14 merge window
-
Kuninori Morimoto authored
By this patch, DAI format might be automatically selected (Depends on paired DAI). Link: https://lore.kernel.org/r/871rb3hypy.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871racbx0w.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
By this patch, DAI format might be automatically selected (Depends on paired DAI). Link: https://lore.kernel.org/r/871rb3hypy.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871racbx0w.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
By this patch, DAI format might be automatically selected (Depends on paired DAI). Link: https://lore.kernel.org/r/871rb3hypy.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871racbx0w.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
By this patch, DAI format might be automatically selected (Depends on paired DAI). Link: https://lore.kernel.org/r/871rb3hypy.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871racbx0w.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
By this patch, DAI format might be automatically selected (Depends on paired DAI). Link: https://lore.kernel.org/r/871rb3hypy.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871racbx0w.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
ASoC is using dai_link which specify DAI format (= dai_link->dai_fmt), and it is selected by "Sound Card" driver in corrent implementation. In other words, Sound Card *needs* to setup it. But, it should be possible to automatically selected from CPU and Codec driver settings. This patch adds new .auto_selectable_formats support at snd_soc_dai_ops. By this patch, dai_fmt can be automatically selected from each driver if both CPU / Codec driver had it. Automatically selectable *field* is depends on each drivers. For example, some driver want to select format "automatically", but want to select other fields "manually", because of complex limitation. Or other example, in case of both CPU and Codec are possible to be clock provider, but the quality was different. In these case, user need/want to *manually* select each fields from Sound Card driver. This .auto_selectable_formats can set priority. For example, no limitaion format can be HI priority, supported but has picky limitation format can be next priority, etc. It uses Sound Card specified fields preferentially, and try to select non-specific fields from CPU and Codec driver automatically if all drivers have .auto_selectable_formats. In other words, we can select all dai_fmt via Sound Card driver same as before. Link: https://lore.kernel.org/r/871rb3hypy.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871racbx0w.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
This patch moves snd_soc_runtime_set_dai_fmt() to upside. This is prepare to support snd_soc_runtime_get_dai_fmt(). Signed-off-by:
-
- 04 Jun, 2021 7 commits
-
-
Mark Brown authored
Merge series "ASoC: codecs: wcd934x: add Headset and button detection support" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: This patchset adds support to MBHC(Multi Button Headset Control) block found in Qualcomm WCD codecs. MBHC support headset type detection, both Mechanical and electrical insert/removal detection along with 8 buttons detection, Over current interrupts on HPHL/R, Impedance Measurements on HPHL/R. Eventhough MBHC block supports things like OverCurrent detection, Currently its reported as a kernel debug message. Should this be reported as an uevent to userspace? like the way USB reports? Any suggestions? First patch adds a common mbhc driver and the second one wcd934x specific driver changes along with sdm845 soundcard related changes. Common wcd-mbhc-v2 driver should be reusable across multiple codecs like WCD9335, WCD934x, WCD937x and WCD938x. Most of the work is derived from downstream Qualcomm kernels. Credits to various Qualcomm authors from Patrick Lai's team who have contributed to this code. Changes since v2: - switched to EXPORT_SYMBOL_GPL from EXPORT_SYMBOL - converted one of the if else to switch case. Srinivas Kandagatla (4): ASoC: dt-bindings: wcd934x: add bindings for Headset Button detection ASoC: codecs: wcd: add multi button Headset detection support ASoC: codecs: wcd934x: add mbhc support ASoC: qcom: sdm845: add jack support for WCD934x .../bindings/sound/qcom,wcd934x.yaml | 30 + include/linux/mfd/wcd934x/registers.h | 57 + sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wcd-mbhc-v2.c | 1475 +++++++++++++++++ sound/soc/codecs/wcd-mbhc-v2.h | 340 ++++ sound/soc/codecs/wcd934x.c | 884 +++++++++- sound/soc/qcom/sdm845.c | 8 + 8 files changed, 2785 insertions(+), 15 deletions(-) create mode 100644 sound/soc/codecs/wcd-mbhc-v2.c create mode 100644 sound/soc/codecs/wcd-mbhc-v2.h -- 2.21.0
-
Srinivas Kandagatla authored
Signed-off-by:
-
Srinivas Kandagatla authored
WCD934x has Multi Button Headset Control hardware to support Headset insertion, type detection, 8 headset buttons detection, Over Current detection and Impedence measurements. This patch adds support for this feature via common mbhc layer. Signed-off-by:
-
Srinivas Kandagatla authored
Most new Qualcomm WCD codecs support MBHC(Multi Button Headset Control) via ADC. This patchset adds support to Common parts of this MBHC support so that WCD codecs need not duplicate them. To do that codec exposes set of register fields and callbacks to this common driver to control it. Signed-off-by:
-
Srinivas Kandagatla authored
Add bindings required for Multi Button Headset detection. WCD934x support Headsets with upto 8 buttons including, impedance measurement on both L/R Headset speakers and cross connection detection. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210604115230.23259-2-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Bertrand Jacquin authored
With CONFIG_SND_SOC_LPASS_RX_MACRO=m and CONFIG_REGMAP_MMIO undefined, build fails with the following error make -f /var/tmp/portage/sys-kernel/stable-sources-5.12.8/work/linux-5.12.8-stable/scripts/Makefile.modpost sed 's/\.ko$/\.o/' modules.order | scripts/mod/modpost -E -o modules-only.symvers -i vmlinux.symvers -T - ERROR: modpost: "__devm_regmap_init_mmio_clk" [sound/soc/codecs/snd-soc-lpass-rx-macro.ko] undefined! This does also apply to other Qualcomm Macro LPASS all making call to devm_regmap_init_mmio() Signed-off-by:Bertrand Jacquin <bertrand@jacquin.bzh> Link: https://lore.kernel.org/r/20210603221816.2642402-1-bertrand@jacquin.bzhSigned-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a fallthrough; statement. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by:
Peter Ujfalusi <peter.ujflausi@gmail.com> Link: https://lore.kernel.org/r/20210604072714.GA244640@embeddedorSigned-off-by:
-
- 03 Jun, 2021 11 commits
-
-
Mark Brown authored
Merge series "ASoC: rsnd: tidyup adg and header" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark I noticed that adg can be more clean code. And rsnd.h header comment was not so good because patch has been randomly added. This patch tidyup these. Kuninori Morimoto (5): ASoC: rsnd: adg: supply __printf(x, y) formatting for dbg_msg() ASoC: rsnd: adg: tidyup rsnd_adg_get_clkin/out() parameter ASoC: rsnd: adg: use more simple method for null_clk ASoC: rsnd: adg: check return value for rsnd_adg_get_clkin/out() ASoC: rsnd: tidyup __rsnd_mod_xxx macro comments sound/soc/sh/rcar/adg.c | 139 +++++++++++++++++++++++++-------------- sound/soc/sh/rcar/rsnd.h | 21 ++---- 2 files changed, 97 insertions(+), 63 deletions(-) -- 2.25.1
-
Yufen Yu authored
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Link: https://lore.kernel.org/r/20210524093521.612176-1-yuyufen@huawei.comSigned-off-by:
-
Yang Yingliang authored
Using devm_snd_soc_register_card() can make the code shorter and cleaner. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210602133359.310647-1-yangyingliang@huawei.comSigned-off-by:
-
Colin Ian King authored
Most callers of_get_child_count() check that "nr" is non-zero so it causes a static checker warning when we don't do that here. This does not cause a problem or a crash, but having zero SSUIes does not make sense either so let's add a check. Addresses-Coverity: ("Unchecked return value") Fixes: c413983e ("ASoC: rsnd: adjust disabled module") Acked-by: -
Oleksij Rempel authored
Convert the imx-audmux binding to DT schema format using json-schema Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
-
Yang Yingliang authored
module_rpmsg_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by:
-
Yang Yingliang authored
Using devm_snd_soc_register_card() can make the code shorter and cleaner. Signed-off-by:
-
Kuninori Morimoto authored
status and __rsnd_mod_xxx were updated, but some related comments were not. And it has verbose comments. This patch cleanup/tidyup these. 1) adds missing "D" to status sample 2) remove verbose list for "H" 3) add "needs protect" to __rsnd_mod_call_xxx Signed-off-by:
-
Kuninori Morimoto authored
Current rsnd_adg_get_clkin/out() are void function, thus adg->clk/clkout[i] might be NULL. But, for_each_rsnd_clk/clkout() macros are assuming all clks are non NULL. Because of this mismatch, code can be complex and/or buggy. These functions return error by this patch, and make sure all clks are non NULL. Signed-off-by:
-
Kuninori Morimoto authored
commit 965386c9 ("ASoC: rsnd: call unregister for null_hw when removed") tried unregister null_clk, but it has some issues. 1st issue is kernel will indicate below message when unregistering, because of its timing. unregistering should be happen after clk_disable(). clk_unregister: unregistering prepared clock: rsnd_adg_null 2nd issue is, it is using priv->null_clk, but it should be adg->null_clk. 3rd issue is it is using very complex clk registering method. more simple clk_register/unregister_fixed_rate() should be OK. This patch fixes these. Fixes: 965386c9 ("ASoC: rsnd: call unregister for null_hw when removed") Signed-off-by:
-
Kuninori Morimoto authored
set priv->adg before rsnd_adg_get_clkin/out() to be more simple code. Nothing is changed, but is preparation for next "ASoC: rsnd: adg: use more simple method for null_clk" patch Signed-off-by:
-
