- 31 Jan, 2007 13 commits
-
-
Seokmann Ju authored
Since, mailbox commands are executed in a synchronous manner, there is no need to have a separate spinlock primitive to protect data/register access shared by callers. Signed-off-by:
Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
As ISP24xx firmware can return a CS_DATA_UNDERRUN completion status when the storage has returned a SAM_STAT_TASK_SET_FULL scsi-status. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Non-ISP24xx cards must have a loop-id in order to query host statistics. Signed-off-by:
-
Andrew Vasquez authored
Limit assignments via qla2x00_model_name[] array to HBA subsystem vendor IDs equal to QLogic. Signed-off-by:
-
Andrew Vasquez authored
Previous work to add asynchronous-scsi-scanning support (d19044c3) caused peculiar semantic changes when no cabling was attached to the HBA whereby unneeded and intrusive 'error-handling' would take place due to the initial link state being unset. Signed-off-by:
-
Lalit Chandivade authored
Similarly to previous LOGO requests on non-24xx hardware, perform an implicit-LOGO as to avoid the potential 2 * R_A_TOV delay which can result during an explicit-LOGO request. Signed-off-by:
-
Andrew Vasquez authored
This includes BIOS, EFI, FCODE and firmware versions. Signed-off-by:
-
Andrew Vasquez authored
No restriction should be placed on the IRQ number assigned to a given ISP. Original code incorrectly assumed a non-zero IRQ number assignment by the system. In these circumstances the proper freeing of the IRQ (via free_irq()) would not take place. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
- 30 Jan, 2007 2 commits
-
-
FUJITA Tomonori authored
Why TASK_ATTR_HOQ? Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
Greg Kroah-Hartman authored
This patch removes a duplicate device id from the IPR driver. Based on the ipr.h file, I'm not so sure this was intended to be a duplicate, and if so, the .h file should be modified to use the proper sub-device id instead. This was pointed out to me by Kay Sievers <kay.sievers@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
- 27 Jan, 2007 18 commits
-
-
Darrick J. Wong authored
Set allow_restart=1 for all SAS disks so that they are spun up when needed. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
-
Darrick J. Wong authored
Register libsas's default device reset code with the scsi. Signed-off-by:
-
Darrick J. Wong authored
This patch moves the code that handles SAS failures out of the main EH function and into a separate function. It also detects commands that have no sas_task (i.e. they completed, but with error data) and sends them into scsi_error for processing. This allows us to handle SCSI errors (and enables auto-spinup as a side effect) instead of dropping them on the floor and falling into an infinite loop. It also requires the implementation of a device reset function, which the SAS failure code has been modified to employ for REQ_DEVICE_RESET. Signed-off-by:
-
Darrick J. Wong authored
Export a couple of functions from scsi_error that are needed to handle failed SCSI commands from the SAS EH. Signed-off-by:
-
Darrick J. Wong authored
Get rid of: "warning: ignoring return value of sysfs_create_link..." Signed-off-by:
-
Darrick J. Wong authored
sas_rphy_delete does two things: it removes the sas_rphy from the transport layer and frees the sas_rphy. This can be broken down into two functions, sas_rphy_remove and sas_rphy_free; sas_rphy_remove is of interest to sas_discover_root_expander because it calls functions that require sas_rphy_add as a prerequisite and can fail (namely sas_discover_expander). In that case, sas_discover_root_expander needs to be able to undo the effects of sas_rphy_add yet leave the job of freeing the sas_rphy to the caller of sas_discover_root_expander. This patch also removes some unnecessary code from sas_discover_end_dev to eliminate an unnecessary cycle of sas_notify_lldd_gone/found for SAS devices, thus eliminating a sas_rphy_remove call (and fixing a race condition where a SCSI target scan can come in between the gone and found call). It also moves the sas_rphy_free calls into sas_discover_domain and sas_ex_discover_end_dev to complement the sas_rphy_allocation via sas_get_port_device. This patch does not change the semantics of sas_rphy_delete. Signed-off-by:
-
Darrick J. Wong authored
Currently, sas_form_port checks the given asd_sas_phy's sas_phy to see if there's already a port attached. If so, the SAS addresses of the port and the phy are compared to determine if we need to detach from the port because the addresses don't match or if we can stop; the SAS address stored in the sas_port reflects whatever device _was_ attached to the port/phy, and the SAS address stored in the sas_port reflects whatever device we just discovered. As written, the code detaches from the port if the addresses _do_ match, and prints an error if they do _not_ match. I believe this to be incorrect, as it seems more logical to keep the port if the addresses match (i.e. the phy was reset but the device didn't change), and detach it they do not (i.e. the device changed). Signed-off-by:
-
Mark Haverkamp authored
Fix a typo in NCR_D700 Signed-off-by Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: -
Mark Haverkamp authored
Received from Mark Salyzyn, Take the expose_physicals flag and allow the user to select default (physicals available via /dev/sg), exposed (physicals available via /dev/sd for experimental reasons) and hidden (physicals blocked from all access). This expands the functionality of the previous expose_physicals insmod parameter which was added to support some experimental configurations. Signed-off-by Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: -
Mark Haverkamp authored
Received from Mark Salyzyn, Replace all if/else packet formations with platform function calls. This is in recognition of the proliferation of read and write packet types, and in the need to migrate to up-and-coming packets for new products. Signed-off-by Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: -
Mark Haverkamp authored
Received from Mark Salyzyn, Add in the NEMER/ARK physical register mapping, represented in up and coming products currently under test at Adaptec. Signed-off-by Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: -
Mark Haverkamp authored
Received from Mark Salyzyn, Replace all if/else communication transports with a platform function call. This is in recognition of the need to migrate to up-and-coming transports. Currently the Linux driver does not support two available communication transports provided by our products, these will be added in future patches, and will expand the platform function set. Signed-off-by Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: -
Brian King authored
Bump driver version to 2.3.1. Signed-off-by:
-
Brian King authored
Since the pci_block_user_cfg_access API was modified to track block/unblocks, it was discovered that the ipr driver had a path through its code (in PCI error recovery) which would unblock when not previously blocked. Signed-off-by:
-
Brian King authored
Don't fail initialization of an adapter if the PCI-X registers cannot be found since it may be a PCI-E adapter. Signed-off-by:
-
Brian King authored
Since ipr handles dynamic ids, it must handle driver_data not being set, so remove the current usage of driver_data so it can be used for other things in future patches. Signed-off-by:
-
Eric Moore authored
Here are the lastest mpi headers for mpt fusion driver, which defines the firmware to driver interface. Signed-off-by:
Eric Moore <Eric.Moore@lsi.com> Signed-off-by:
-
Alexis Bruemmer authored
fix typos and bump version number Signed-off-by:
Alexis Bruemmer <alexisb@us.ibm.com> Signed-off-by:
-
- 13 Jan, 2007 7 commits
-
-
Darrick J. Wong authored
The EH should fall into I_T recovery (and potentially stronger remedies) if ABORT TASK fails. Signed-off-by:
-
Darrick J. Wong authored
Track sas_ha_struct state so that we ignore events that come in while we're shutting things down. Signed-off-by:
Malahal Naineni <malahal@us.ibm.com> Signed-off-by:
-
Darrick J. Wong authored
Convert the phy port locks to use irq spinlocks. Signed-off-by:
-
Darrick J. Wong authored
Add the necessary hooks to the aic94xx driver to support the asynchronous SCSI device scan infrastructure. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Darrick J. Wong authored
Allowing the phy reset controls to be world-triggerable does not seem like a terribly good idea because SAS devices can be disrupted (and ATA devices are really disrupted) by a phy reset. By default only root should be able to do things like that. Signed-off-by:
-
Darrick J. Wong authored
Extend the use of the DDB lock to include all DDB accesses, because DDB updates now occur from multiple threads. This fixes the SMP timeout problems that we were occasionally seeing with a x260, because the controller got confused when the DDBs got corrupted. Signed-off-by:
-
Darrick J. Wong authored
Ed Chim of Adaptec informs us that the DDB registers need to be zeroed at initialization time and that some SCB initializations need to happen even if we don't use the SCB. Signed-off-by:
-
