- 02 Jan, 2018 40 commits
-
-
Shuah Khan authored
commit 8272d099 upstream. Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shuah Khan authored
commit 248a2204 upstream. Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by:
-
Shuah Khan authored
commit 90120d15 upstream. usbip driver is leaking socket pointer address in messages. Remove the messages that aren't useful and print sockfd in the ones that are useful for debugging. Signed-off-by:
-
Juan Zea authored
commit 544c4605 upstream. usbip bind writes commands followed by random string when writing to match_busid attribute in sysfs, caused by using full variable size instead of string length. Signed-off-by:
Juan Zea <juan.zea@qindel.com> Acked-by:
-
Julian Wiedmann authored
[ Upstream commit 02f510f3 ] Any modification to the takeover IP-ranges requires that we re-evaluate which IP addresses are takeover-eligible. Otherwise we might do takeover for some addresses when we no longer should, or vice-versa. Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit 8a03a369 ] Modifying the flags of an IP addr object needs to be protected against eg. concurrent removal of the same object from the IP table. Fixes: 5f78e29c ("qeth: optimize IP handling in rx_mode callback") Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit b22d73d6 ] When takeover is switched off, current code clears the 'TAKEOVER' flag on all IPs. But the flag is also used for RXIP addresses, and those should not be affected by the takeover mode. Fix the behaviour by consistenly applying takover logic to NORMAL addresses only. Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit 7fbd9493 ] Just as for an explicit enable/disable, toggling the takeover mode also requires that the IP addresses get updated. Otherwise all IPs that were added to the table before the mode-toggle, get registered with the old settings. Signed-off-by:
-
Moni Shoua authored
[ Upstream commit dbff26e4 ] In error flow, when DESTROY_QP command should be executed, the wrong mailbox was set with data, not the one that is written to hardware, Fix that. Fixes: 09a7d9ec '{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc' Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Gal Pressman authored
[ Upstream commit 0c1cc8b2 ] When calling add/remove VXLAN port, a lock must be held in order to prevent race scenarios when more than one add/remove happens at the same time. Fix by holding our state_lock (mutex) as done by all other parts of the driver. Note that the spinlock protecting the radix-tree is still needed in order to synchronize radix-tree access from softirq context. Fixes: b3f63c3d ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by:
Gal Pressman <galp@mellanox.com> Signed-off-by:
-
Gal Pressman authored
[ Upstream commit 23f4cc2c ] A refcount mechanism must be implemented in order to prevent unwanted scenarios such as: - Open an IPv4 VXLAN interface - Open an IPv6 VXLAN interface (different socket) - Remove one of the interfaces With current implementation, the UDP port will be removed from our VXLAN database and turn off the offloads for the other interface, which is still active. The reference count mechanism will only allow UDP port removals once all consumers are gone. Fixes: b3f63c3d ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by:
-
Gal Pressman authored
[ Upstream commit 63235141 ] mlx5e_vxlan_lookup_port is called both from mlx5e_add_vxlan_port (user context) and mlx5e_features_check (softirq), but the lock acquired does not disable bottom half and might result in deadlock. Fix it by simply replacing spin_lock() with spin_lock_bh(). While at it, replace all unnecessary spin_lock_irq() to spin_lock_bh(). lockdep's WARNING: inconsistent lock state [ 654.028136] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 654.028229] swapper/5/0 [HC0[0]:SC1[9]:HE1:SE0] takes: [ 654.028321] (&(&vxlan_db->lock)->rlock){+.?.}, at: [<ffffffffa06e7f0e>] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core] [ 654.028528] {SOFTIRQ-ON-W} state was registered at: [ 654.028607] _raw_spin_lock+0x3c/0x70 [ 654.028689] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core] [ 654.028794] mlx5e_vxlan_add_port+0x2e/0x120 [mlx5_core] [ 654.028878] process_one_work+0x1e9/0x640 [ 654.028942] worker_thread+0x4a/0x3f0 [ 654.029002] kthread+0x141/0x180 [ 654.029056] ret_from_fork+0x24/0x30 [ 654.029114] irq event stamp: 579088 [ 654.029174] hardirqs last enabled at (579088): [<ffffffff818f475a>] ip6_finish_output2+0x49a/0x8c0 [ 654.029309] hardirqs last disabled at (579087): [<ffffffff818f470e>] ip6_finish_output2+0x44e/0x8c0 [ 654.029446] softirqs last enabled at (579030): [<ffffffff810b3b3d>] irq_enter+0x6d/0x80 [ 654.029567] softirqs last disabled at (579031): [<ffffffff810b3c05>] irq_exit+0xb5/0xc0 [ 654.029684] other info that might help us debug this: [ 654.029781] Possible unsafe locking scenario: [ 654.029868] CPU0 [ 654.029908] ---- [ 654.029947] lock(&(&vxlan_db->lock)->rlock); [ 654.030045] <Interrupt> [ 654.030090] lock(&(&vxlan_db->lock)->rlock); [ 654.030162] *** DEADLOCK *** Fixes: b3f63c3d ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by:
-
Gal Pressman authored
[ Upstream commit 2989ad1e ] The assumption that the next header field contains the transport protocol is wrong for IPv6 packets with extension headers. Instead, we should look the inner-most next header field in the buffer. This will fix TSO offload for tunnels over IPv6 with extension headers. Performance testing: 19.25x improvement, cool! Measuring bandwidth of 16 threads TCP traffic over IPv6 GRE tap. CPU: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex] TSO: Enabled Before: 4,926.24 Mbps Now : 94,827.91 Mbps Fixes: b3f63c3d ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by:
-
Eran Ben Elisha authored
[ Upstream commit 37e92a9d ] In mlx5_ifc, struct size was not complete, and thus driver was sending garbage after the last defined field. Fixed it by adding reserved field to complete the struct size. In addition, rename all set_rate_limit to set_pp_rate_limit to be compliant with the Firmware <-> Driver definition. Fixes: 7486216b ("{net,IB}/mlx5: mlx5_ifc updates") Fixes: 1466cc5b ("net/mlx5: Rate limit tables support") Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Yousuk Seung authored
[ Upstream commit d4761754 ] Mark tcp_sock during a SACK reneging event and invalidate rate samples while marked. Such rate samples may overestimate bw by including packets that were SACKed before reneging. < ack 6001 win 10000 sack 7001:38001 < ack 7001 win 0 sack 8001:38001 // Reneg detected > seq 7001:8001 // RTO, SACK cleared. < ack 38001 win 10000 In above example the rate sample taken after the last ack will count 7001-38001 as delivered while the actual delivery rate likely could be much lower i.e. 7001-8001. This patch adds a new field tcp_sock.sack_reneg and marks it when we declare SACK reneging and entering TCP_CA_Loss, and unmarks it after the last rate sample was taken before moving back to TCP_CA_Open. This patch also invalidates rate samples taken while tcp_sock.is_sack_reneg is set. Fixes: b9f64820 ("tcp: track data delivery rate for a TCP connection") Signed-off-by:
Yousuk Seung <ysseung@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Priyaranjan Jha <priyarjha@google.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 35b99dff ] skb_complete_tx_timestamp must ingest the skb it is passed. Call kfree_skb if the skb cannot be enqueued. Fixes: b245be1f ("net-timestamp: no-payload only sysctl") Fixes: 9ac25fc0 ("net: fix socket refcounting in skb_complete_tx_timestamp()") Reported-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
-
Grygorii Strashko authored
[ Upstream commit c1a8d0a3 ] Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719b ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 21b59443 ] (I can trivially verify that that idr_remove in cleanup_net happens after the network namespace count has dropped to zero --EWB) Function get_net_ns_by_id() does not check for net::count after it has found a peer in netns_ids idr. It may dereference a peer, after its count has already been finaly decremented. This leads to double free and memory corruption: put_net(peer) rtnl_lock() atomic_dec_and_test(&peer->count) [count=0] ... __put_net(peer) get_net_ns_by_id(net, id) spin_lock(&cleanup_list_lock) list_add(&net->cleanup_list, &cleanup_list) spin_unlock(&cleanup_list_lock) queue_work() peer = idr_find(&net->netns_ids, id) | get_net(peer) [count=1] | ... | (use after final put) v ... cleanup_net() ... spin_lock(&cleanup_list_lock) ... list_replace_init(&cleanup_list, ..) ... spin_unlock(&cleanup_list_lock) ... ... ... ... put_net(peer) ... atomic_dec_and_test(&peer->count) [count=0] ... spin_lock(&cleanup_list_lock) ... list_add(&net->cleanup_list, &cleanup_list) ... spin_unlock(&cleanup_list_lock) ... queue_work() ... rtnl_unlock() rtnl_lock() ... for_each_net(tmp) { ... id = __peernet2id(tmp, peer) ... spin_lock_irq(&tmp->nsid_lock) ... idr_remove(&tmp->netns_ids, id) ... ... ... net_drop_ns() ... net_free(peer) ... } ... | v cleanup_net() ... (Second free of peer) Also, put_net() on the right cpu may reorder with left's cpu list_replace_init(&cleanup_list, ..), and then cleanup_list will be corrupted. Since cleanup_net() is executed in worker thread, while put_net(peer) can happen everywhere, there should be enough time for concurrent get_net_ns_by_id() to pick the peer up, and the race does not seem to be unlikely. The patch fixes the problem in standard way. (Also, there is possible problem in peernet2id_alloc(), which requires check for net::count under nsid_lock and maybe_get_net(peer), but in current stable kernel it's used under rtnl_lock() and it has to be safe. Openswitch begun to use peernet2id_alloc(), and possibly it should be fixed too. While this is not in stable kernel yet, so I'll send a separate message to netdev@ later). Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Fixes: 0c7aecd4 "netns: add rtnl cmd to add and get peer netns ids" Reviewed-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Andrew Lunn authored
[ Upstream commit fbbeefdd ] The FEC Receive Control Register has a 14 bit field indicating the longest frame that may be received. It is being set to 1522. Frames longer than this are discarded, but counted as being in error. When using DSA, frames from the switch has an additional header, either 4 or 8 bytes if a Marvell switch is used. Thus a full MTU frame of 1522 bytes received by the switch on a port becomes 1530 bytes when passed to the host via the FEC interface. Change the maximum receive size to 2048 - 64, where 64 is the maximum rx_alignment applied on the receive buffer for AVB capable FEC cores. Use this value also for the maximum receive buffer size. The driver is already allocating a receive SKB of 2048 bytes, so this change should not have any significant effects. Tested on imx51, imx6, vf610. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 84aeb437 ] The early call to br_stp_change_bridge_id in bridge's newlink can cause a memory leak if an error occurs during the newlink because the fdb entries are not cleaned up if a different lladdr was specified, also another minor issue is that it generates fdb notifications with ifindex = 0. Another unrelated memory leak is the bridge sysfs entries which get added on NETDEV_REGISTER event, but are not cleaned up in the newlink error path. To remove this special case the call to br_stp_change_bridge_id is done after netdev register and we cleanup the bridge on changelink error via br_dev_delete to plug all leaks. This patch makes netlink bridge destruction on newlink error the same as dellink and ioctl del which is necessary since at that point we have a fully initialized bridge device. To reproduce the issue: $ ip l add br0 address 00:11:22:33:44:55 type bridge group_fwd_mask 1 RTNETLINK answers: Invalid argument $ rmmod bridge [ 1822.142525] ============================================================================= [ 1822.143640] BUG bridge_fdb_cache (Tainted: G O ): Objects remaining in bridge_fdb_cache on __kmem_cache_shutdown() [ 1822.144821] ----------------------------------------------------------------------------- [ 1822.145990] Disabling lock debugging due to kernel taint [ 1822.146732] INFO: Slab 0x0000000092a844b2 objects=32 used=2 fp=0x00000000fef011b0 flags=0x1ffff8000000100 [ 1822.147700] CPU: 2 PID: 13584 Comm: rmmod Tainted: G B O 4.15.0-rc2+ #87 [ 1822.148578] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 1822.150008] Call Trace: [ 1822.150510] dump_stack+0x78/0xa9 [ 1822.151156] slab_err+0xb1/0xd3 [ 1822.151834] ? __kmalloc+0x1bb/0x1ce [ 1822.152546] __kmem_cache_shutdown+0x151/0x28b [ 1822.153395] shutdown_cache+0x13/0x144 [ 1822.154126] kmem_cache_destroy+0x1c0/0x1fb [ 1822.154669] SyS_delete_module+0x194/0x244 [ 1822.155199] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 1822.155773] entry_SYSCALL_64_fastpath+0x23/0x9a [ 1822.156343] RIP: 0033:0x7f929bd38b17 [ 1822.156859] RSP: 002b:00007ffd160e9a98 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 1822.157728] RAX: ffffffffffffffda RBX: 00005578316ba090 RCX: 00007f929bd38b17 [ 1822.158422] RDX: 00007f929bd9ec60 RSI: 0000000000000800 RDI: 00005578316ba0f0 [ 1822.159114] RBP: 0000000000000003 R08: 00007f929bff5f20 R09: 00007ffd160e8a11 [ 1822.159808] R10: 00007ffd160e9860 R11: 0000000000000202 R12: 00007ffd160e8a80 [ 1822.160513] R13: 0000000000000000 R14: 0000000000000000 R15: 00005578316ba090 [ 1822.161278] INFO: Object 0x000000007645de29 @offset=0 [ 1822.161666] INFO: Object 0x00000000d5df2ab5 @offset=128 Fixes: 30313a3d ("bridge: Handle IFLA_ADDRESS correctly when creating bridge device") Fixes: 5b8d5429 ("bridge: netlink: register netdevice before executing changelink") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit b4681c28 ] Since commit 0ddcf43d ("ipv4: FIB Local/MAIN table collapse") the local table uses the same trie allocated for the main table when custom rules are not in use. When a net namespace is dismantled, the main table is flushed and freed (via an RCU callback) before the local table. In case the callback is invoked before the local table is iterated, a use-after-free can occur. Fix this by iterating over the FIB tables in reverse order, so that the main table is always freed after the local table. v3: Reworded comment according to Alex's suggestion. v2: Add a comment to make the fix more explicit per Dave's and Alex's feedback. Fixes: 0ddcf43d ("ipv4: FIB Local/MAIN table collapse") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Nikita V. Shirokov authored
[ Upstream commit 74c4b656 ] commit 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels") introduced new exit point in ipxip6_rcv. however rcu_read_unlock is missing there. this diff is fixing this v1->v2: instead of doing rcu_read_unlock in place, we are going to "drop" section (to prevent skb leakage) Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by:
Nikita V. Shirokov <tehnerd@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Tonghao Zhang authored
[ Upstream commit 8cb38a60 ] The patch(180d8cd9) replaces all uses of struct sock fields' memory_pressure, memory_allocated, sockets_allocated, and sysctl_mem to accessor macros. But the sockets_allocated field of sctp sock is not replaced at all. Then replace it now for unifying the code. Fixes: 180d8cd9 ("foundations of per-cgroup memory pressure controlling.") Cc: Glauber Costa <glommer@parallels.com> Signed-off-by:
Tonghao Zhang <zhangtonghao@didichuxing.com> Signed-off-by:
-
Tobias Jordan authored
[ Upstream commit 589bf32f ] add appropriate calls to clk_disable_unprepare() by jumping to out_mdio in case orion_mdio_probe() returns -EPROBE_DEFER. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 3d604da1 ("net: mvmdio: get and enable optional clock") Signed-off-by:
Tobias Jordan <Tobias.Jordan@elektrobit.com> Reviewed-by:
-
Mohamed Ghannam authored
[ Upstream commit 8f659a03 ] inet->hdrincl is racy, and could lead to uninitialized stack pointer usage, so its value should be read only once. Fixes: c008ba5b ("ipv4: Avoid reading user iov twice after raw_probe_proto_opt") Signed-off-by:
Mohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by:
-
Brian King authored
[ Upstream commit 748a240c ] This fixes a hang issue seen when changing the MTU size from 1500 MTU to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom, they've indicated that these chipsets have the same phy as the 57766 chipset, so the same workarounds apply. This has been tested by IBM on both Power 8 and Power 9 systems as well as by Broadcom on x86 hardware and has been confirmed to resolve the hang issue. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Christoph Paasch authored
[ Upstream commit 30791ac4 ] The MD5-key that belongs to a connection is identified by the peer's IP-address. When we are in tcp_v4(6)_reqsk_send_ack(), we are replying to an incoming segment from tcp_check_req() that failed the seq-number checks. Thus, to find the correct key, we need to use the skb's saddr and not the daddr. This bug seems to have been there since quite a while, but probably got unnoticed because the consequences are not catastrophic. We will call tcp_v4_reqsk_send_ack only to send a challenge-ACK back to the peer, thus the connection doesn't really fail. Fixes: 9501f972 ("tcp md5sig: Let the caller pass appropriate key for tcp_v{4,6}_do_calc_md5_hash().") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Reviewed-by:
-
Neal Cardwell authored
[ Upstream commit c589e69b ] This commit records the "full bw reached" decision in a new full_bw_reached bit. This is a pure refactor that does not change the current behavior, but enables subsequent fixes and improvements. In particular, this enables simple and clean fixes because the full_bw and full_bw_cnt can be unconditionally zeroed without worrying about forgetting that we estimated we filled the pipe in Startup. And it enables future improvements because multiple code paths can be used for estimating that we filled the pipe in Startup; any new code paths only need to set this bit when they think the pipe is full. Note that this fix intentionally reduces the width of the full_bw_cnt counter, since we have never used the most significant bit. Signed-off-by:
-
Avinash Repaka authored
[ Upstream commit 14e138a8 ] RDS currently doesn't check if the length of the control message is large enough to hold the required data, before dereferencing the control message data. This results in following crash: BUG: KASAN: stack-out-of-bounds in rds_rdma_bytes net/rds/send.c:1013 [inline] BUG: KASAN: stack-out-of-bounds in rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066 Read of size 8 at addr ffff8801c928fb70 by task syzkaller455006/3157 CPU: 0 PID: 3157 Comm: syzkaller455006 Not tainted 4.15.0-rc3+ #161 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430 rds_rdma_bytes net/rds/send.c:1013 [inline] rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066 sock_sendmsg_nosec net/socket.c:628 [inline] sock_sendmsg+0xca/0x110 net/socket.c:638 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2018 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2108 SYSC_sendmmsg net/socket.c:2139 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2134 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x43fe49 RSP: 002b:00007fffbe244ad8 EFLAGS: 00000217 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fe49 RDX: 0000000000000001 RSI: 000000002020c000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004017b0 R13: 0000000000401840 R14: 0000000000000000 R15: 0000000000000000 To fix this, we verify that the cmsg_len is large enough to hold the data to be read, before proceeding further. Reported-by:
syzbot <syzkaller-bugs@googlegroups.com> Signed-off-by:
Avinash Repaka <avinash.repaka@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit a8ceb5db ] Users of ptr_ring expect that it's safe to give the data structure a pointer and have it be available to consumers, but that actually requires an smb_wmb or a stronger barrier. In absence of such barriers and on architectures that reorder writes, consumer might read an un=initialized value from an skb pointer stored in the skb array. This was observed causing crashes. To fix, add memory barriers. The barrier we use is a wmb, the assumption being that producers do not need to read the value so we do not need to order these reads. Reported-by:
George Cherian <george.cherian@cavium.com> Suggested-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
-
Shaohua Li authored
[ Upstream commit 513674b5 ] sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2. If sockopt doesn't set autoflowlabel, outcome packets from the hosts are supposed to not include flowlabel. This is true for normal packet, but not for reset packet. The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't changed, so the sock will keep the old behavior in terms of auto flowlabel. Reset packet is suffering from this problem, because reset packet is sent from a special control socket, which is created at boot time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control socket will always have its ipv6_pinfo.autoflowlabel set, even after user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always have flowlabel. Normal sock created before sysctl setting suffers from the same issue. We can't even turn off autoflowlabel unless we kill all socks in the hosts. To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the autoflowlabel setting from user, otherwise we always call ip6_default_np_autolabel() which has the new settings of sysctl. Note, this changes behavior a little bit. Before commit 42240901 (ipv6: Implement different admin modes for automatic flow labels), the autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes, existing connection will change autoflowlabel behavior. After that commit, autoflowlabel behavior is sticky in the whole life of the sock. With this patch, the behavior isn't sticky again. Cc: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tom Herbert <tom@quantonium.net> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Sebastian Sjoholm authored
[ Upstream commit aceef61e ] Sierra Wireless EM7565 is an Qualcomm MDM9x50 based M.2 modem. The USB id is added to qmi_wwan.c to allow QMI communication with the EM7565. Signed-off-by:
Sebastian Sjoholm <ssjoholm@mac.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Kevin Cernekee authored
[ Upstream commit 93c64764 ] Currently, a nlmon link inside a child namespace can observe systemwide netlink activity. Filter the traffic so that nlmon can only sniff netlink messages from its own netns. Test case: vpnns -- bash -c "ip link add nlmon0 type nlmon; \ ip link set nlmon0 up; \ tcpdump -i nlmon0 -q -w /tmp/nlmon.pcap -U" & sudo ip xfrm state add src 10.1.1.1 dst 10.1.1.2 proto esp \ spi 0x1 mode transport \ auth sha1 0x6162633132330000000000000000000000000000 \ enc aes 0x00000000000000000000000000000000 grep --binary abc123 /tmp/nlmon.pcap Signed-off-by:
Kevin Cernekee <cernekee@chromium.org> Signed-off-by:
-
Kevin Cernekee authored
[ Upstream commit a46182b0 ] Closing a multicast socket after the final IPv4 address is deleted from an interface can generate a membership report that uses the source IP from a different interface. The following test script, run from an isolated netns, reproduces the issue: #!/bin/bash ip link add dummy0 type dummy ip link add dummy1 type dummy ip link set dummy0 up ip link set dummy1 up ip addr add 10.1.1.1/24 dev dummy0 ip addr add 192.168.99.99/24 dev dummy1 tcpdump -U -i dummy0 & socat EXEC:"sleep 2" \ UDP4-DATAGRAM:239.101.1.68:8889,ip-add-membership=239.0.1.68:10.1.1.1 & sleep 1 ip addr del 10.1.1.1/24 dev dummy0 sleep 5 kill %tcpdump RFC 3376 specifies that the report must be sent with a valid IP source address from the destination subnet, or from address 0.0.0.0. Add an extra check to make sure this is the case. Signed-off-by:
-
Fugang Duan authored
[ Upstream commit 178e5f57 ] The enet IP only support 32 bit, it will use swiotlb buffer to do dma mapping when xmit buffer DMA memory address is bigger than 4G in i.MX platform. After stress suspend/resume test, it will print out: log: [12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes) [12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet [12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed The issue is that the ready xmit buffers that are dma mapped but DMA still don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped. So it should check the dma mapping buffer and unmap them. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b9b312a7 ] syzkaller reported crashes in IPv6 stack [1] Xin Long found that lo MTU was set to silly values. IPv6 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in mld code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv6 minimal MTU. [1] skbuff: skb_over_panic: text:0000000010b86b8d len:196 put:20 head:000000003b477e60 data:000000000e85441e tail:0xd4 end:0xc0 dev:lo ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc2-mm1+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x15c/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801db307508 EFLAGS: 00010286 RAX: 0000000000000082 RBX: ffff8801c517e840 RCX: 0000000000000000 RDX: 0000000000000082 RSI: 1ffff1003b660e61 RDI: ffffed003b660e95 RBP: ffff8801db307570 R08: 1ffff1003b660e23 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff85bd4020 R13: ffffffff84754ed2 R14: 0000000000000014 R15: ffff8801c4e26540 FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000463610 CR3: 00000001c6698000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> skb_over_panic net/core/skbuff.c:109 [inline] skb_put+0x181/0x1c0 net/core/skbuff.c:1694 add_grhead.isra.24+0x42/0x3b0 net/ipv6/mcast.c:1695 add_grec+0xa55/0x1060 net/ipv6/mcast.c:1817 mld_send_cr net/ipv6/mcast.c:1903 [inline] mld_ifc_timer_expire+0x4d2/0x770 net/ipv6/mcast.c:2448 call_timer_fn+0x23b/0x840 kernel/time/timer.c:1320 expire_timers kernel/time/timer.c:1357 [inline] __run_timers+0x7e1/0xb60 kernel/time/timer.c:1660 run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686 __do_softirq+0x29d/0xbb2 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d3/0x210 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:540 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:920 Signed-off-by:
syzbot <syzkaller@googlegroups.com> Tested-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b5476022 ] IPv4 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in igmp code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv4 minimal MTU. This patch adds missing IPV4_MIN_MTU define, to not abuse ETH_MIN_MTU anymore. Signed-off-by:
-
Linus Torvalds authored
commit 3ce120b1 upstream. It appears that hardened gentoo enables "-fstack-check" by default for gcc. That doesn't work _at_all_ for the kernel, because the kernel stack doesn't act like a user stack at all: it's much smaller, and it doesn't auto-expand on use. So the extra "probe one page below the stack" code generated by -fstack-check just breaks the kernel in horrible ways, causing infinite double faults etc. [ I have to say, that the particular code gcc generates looks very stupid even for user space where it works, but that's a separate issue. ] Reported-and-tested-by:
Alexander Tsoy <alexander@tsoy.me> Reported-and-tested-by:
Toralf Förster <toralf.foerster@gmx.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andy Lutomirski authored
commit 924c6b90 upstream. Trying to reboot via real mode fails with PCID on: long mode cannot be exited while CR4.PCIDE is set. (No, I have no idea why, but the SDM and actual CPUs are in agreement here.) The result is a GPF and a hang instead of a reboot. I didn't catch this in testing because neither my computer nor my VM reboots this way. I can trigger it with reboot=bios, though. Fixes: 660da7c9 ("x86/mm: Enable CR4.PCIDE on supported systems") Reported-and-tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/f1e7d965998018450a7a70c2823873686a8b21c0.1507524746.git.luto@kernel.org Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Andy Lutomirski authored
commit 660da7c9 upstream. We can use PCID if the CPU has PCID and PGE and we're not on Xen. By itself, this has no effect. A followup patch will start using PCID. Signed-off-by:
Nadav Amit <nadav.amit@gmail.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
