- 22 Jul, 2019 1 commit
-
-
Chris Wilson authored
The top-level page directory for 36b is a single entry, not multiple like 32b. Fix up the rounding on the calculation of the size of the top level so that we populate the 4th level correctly for 36b. Reported-by:
Jose Souza <jose.souza@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Fixes: 1eda701e ("drm/i915/gtt: Recursive cleanup for gen8") Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Jose Souza <jose.souza@intel.com> Tested-by:
Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190719130737.5835-1-chris@chris-wilson.co.uk
-
- 19 Jul, 2019 13 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/i915/display/icl_dsi.c: In function 'gen11_dsi_set_transcoder_timings': drivers/gpu/drm/i915/display/icl_dsi.c:768:6: warning: variable 'hfront_porch' set but not used [-Wunused-but-set-variable] It is never used and can be removed. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190719015136.103988-1-yuehaibing@huawei.com
-
Michal Wajdeczko authored
When __gen8_ppgtt_alloc fails without allocating anything we should not try to call __gen8_ppgtt_clear as there is nothing to clear and underlying code will complain with: [ 157.861645] gen8_pd_range:881 GEM_BUG_ON(start >= end) Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Chris Wilson authored
Since the underlying __gen8_ppgtt_clear takes the shifted address, we must remember to provide it with the shifted original start address. Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Tvrtko Ursulin authored
This reverts commit 0629d4da. If GuC firmware is not present on the filesystem driver crashes the machine on boot. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Fixes: 0629d4da ("drm/i915: Update description of i915.enable_guc modparam") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20190719094845.6242-3-tvrtko.ursulin@linux.intel.com
-
Tvrtko Ursulin authored
This reverts commit f774f096. If GuC firmware is not present on the filesystem driver crashes the machine on boot. Signed-off-by:
-
Tvrtko Ursulin authored
We were missing this workaround which can cause hangs if fine grained coherency was used. Signed-off-by:
-
Tvrtko Ursulin authored
Having fixed the incorect MCR programming in an earlier patch, we can now stop ignoring read back of GEN8_L3SQCREG4 during engine workaround verification. Signed-off-by:
-
Tvrtko Ursulin authored
Access to 0xb100 - 0xb3ff mmio range is controlled by the MCR selector which only affects CPU MMIO. Therefore these registers cannot be realiably read with MI_SRM from the command streamer so skip their verification. Signed-off-by:
-
Tvrtko Ursulin authored
A couple issues were present in this code: 1. fls() usage was incorrect causing off by one in subslice mask lookup, which in other words means subslice mask of all zeroes is always used (subslice mask of a slice which is not present, or even out of bounds array access), rendering the checks in wa_init_mcr either futile or random. 2. Condition in WARN_ON was not correct. It is doing a bitwise and operation between a positive (present subslices) and negative mask (disabled L3 banks). This means that with corrected fls() usage the assert would always incorrectly fail. We could fix this by inverting the fuse bits in the check, but instead do one better and improve the code so it not only asserts, but finds the first common index between the two masks and only warns if no such index can be found. v2: * Simplify check for logic and redability. * Improve commentary explaining what is really happening ie. what the assert is really trying to check and why. v3: * Find first common index instead of just asserting. Signed-off-by:
-
Tvrtko Ursulin authored
Instead of re-calculating the MCR selector in read_subslice_reg do the rwm on its existing value and restore it when done. This consolidates MCR programming to one place for cnl+, and avoids re-calculating its default value on older platforms during hangcheck. Signed-off-by:
-
Tvrtko Ursulin authored
fls returns bit positions starting from one for the lsb and the MCR register expects zero based (sub)slice addressing. Incorrent MCR programming can have the effect of directing MMIO reads of registers in the 0xb100-0xb3ff range to invalid subslice returning zeroes instead of actual content. Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/i915/display/intel_sprite.c: In function 'g4x_sprite_check_scaling': drivers/gpu/drm/i915/display/intel_sprite.c:1494:13: warning: variable 'src_y' set but not used [-Wunused-but-set-variable] Reported-by:
-
Chris Wilson authored
As we unwind the requests for a preemption event, we return a virtual request back to its original virtual engine (so that it is available for execution on any of its siblings). In the process, this means that its breadcrumb should no longer be associated with the original physical engine, and so we are forced to decouple it. Previously, as the request could not complete without our awareness, we would move it to the next real engine without any danger. However, preempt-to-busy allowed for requests to continue on the HW and complete in the background as we unwound, which meant that we could end up retiring the request before fixing up the breadcrumb link. [51679.517943] INFO: trying to register non-static key. [51679.517956] the code is fine but needs lockdep annotation. [51679.517960] turning off the locking correctness validator. [51679.517966] CPU: 0 PID: 3270 Comm: kworker/u8:0 Tainted: G U 5.2.0+ #717 [51679.517971] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017 [51679.518012] Workqueue: i915 retire_work_handler [i915] [51679.518017] Call Trace: [51679.518026] dump_stack+0x67/0x90 [51679.518031] register_lock_class+0x52c/0x540 [51679.518038] ? find_held_lock+0x2d/0x90 [51679.518042] __lock_acquire+0x68/0x1800 [51679.518047] ? find_held_lock+0x2d/0x90 [51679.518073] ? __i915_sw_fence_complete+0xff/0x1c0 [i915] [51679.518079] lock_acquire+0x90/0x170 [51679.518105] ? i915_request_cancel_breadcrumb+0x29/0x160 [i915] [51679.518112] _raw_spin_lock+0x27/0x40 [51679.518138] ? i915_request_cancel_breadcrumb+0x29/0x160 [i915] [51679.518165] i915_request_cancel_breadcrumb+0x29/0x160 [i915] [51679.518199] i915_request_retire+0x43f/0x530 [i915] [51679.518232] retire_requests+0x4d/0x60 [i915] [51679.518263] i915_retire_requests+0xdf/0x1f0 [i915] [51679.518294] retire_work_handler+0x4c/0x60 [i915] [51679.518301] process_one_work+0x22c/0x5c0 [51679.518307] worker_thread+0x37/0x390 [51679.518311] ? process_one_work+0x5c0/0x5c0 [51679.518316] kthread+0x116/0x130 [51679.518320] ? kthread_create_on_node+0x40/0x40 [51679.518325] ret_from_fork+0x24/0x30 [51679.520177] ------------[ cut here ]------------ [51679.520189] list_del corruption, ffff88883675e2f0->next is LIST_POISON1 (dead000000000100) Fixes: 22b7a426 ("drm/i915/execlists: Preempt-to-busy") Signed-off-by:
-
- 18 Jul, 2019 6 commits
-
-
Dhinakaran Pandiyan authored
A single 32-bit PSR2 training pattern field follows the sixteen element array of PSR table entries in the VBT spec. But, we incorrectly define this PSR2 field for each of the PSR table entries. As a result, the PSR1 training pattern duration for any panel_type != 0 will be parsed incorrectly. Secondly, PSR2 training pattern durations for VBTs with bdb version >= 226 will also be wrong. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: stable@vger.kernel.org Cc: stable@vger.kernel.org #v5.2 Fixes: 88a0d960 ("drm/i915/vbt: Parse and use the new field with PSR2 TP2/3 wakeup time") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111088 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204183Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by:
François Guerraz <kubrick@fgv6.net> Signed-off-by:
-
Chris Wilson authored
As recently disovered by forcing big-core (!llc) machines to use the GTT paths, we need our full GTT write flush before manipulating the GTT PTE or else the writes may be directed to the wrong page. Signed-off-by:
-
Chris Wilson authored
Inside pread, we only ever read from the GTT so the serialising wmb() instructions around the GGTT PTE updates are pointless. Signed-off-by:
-
Ville Syrjälä authored
On VLV/CHV there is some kind of linkage between the cdclk frequency and the DP link frequency. The spec says: "For DP audio configuration, cdclk frequency shall be set to meet the following requirements: DP Link Frequency(MHz) | Cdclk frequency(MHz) 270 | 320 or higher 162 | 200 or higher" I suspect that would more accurately be expressed as "cdclk >= DP link clock", and in any case we can express it like that in the code because of the limited set of cdclk (200, 266, 320, 400 MHz) and link frequencies (162 and 270 MHz) we support. Without this we can end up in a situation where the cdclk is too low and enabling DP audio will kill the pipe. Happens eg. with 2560x1440 modes where the 266MHz cdclk is sufficient to pump the pixels (241.5 MHz dotclock) but is too low for the DP audio due to the link frequency being 270 MHz. v2: Spell out the cdclk and link frequencies we actually support Cc: stable@vger.kernel.org Tested-by:
Stefan Gottwald <gottwald@igel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111149Signed-off-by:
-
Vivek Kasireddy authored
Although, DPLL4 enable and disable is associated with MGPLL1_ENABLE register, we can use ICL_DPLL_CFGCR0/CR1 macros to access this dpll's CR0 and CR1 registers by passing an id of 4 to these macros. Reported-by:
Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Reduce the clutter a bit by introducing gen8_de_pipe_fault_mask(). Signed-off-by:
-
- 17 Jul, 2019 5 commits
-
-
Michel Thierry authored
Reuse Gen11 stolen memory changes since Tiger Lake uses the same BSM register (and format). Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190712210238.5622-1-lucas.demarchi@intel.com
-
Chris Wilson authored
Push the engine stop into the back reset_prepare (where it already was!) This allows us to avoid dangerously setting the RING registers to 0 for logical contexts. If we clear the register on a live context, those invalid register values are recorded in the logical context state and replayed (with hilarious results). Signed-off-by:
-
Chris Wilson authored
By stopping the rings, we may trigger an arbitration point resulting in a premature context-switch (i.e. a completion event before the request is actually complete). This clears the active context before the reset, but we must remember to rewind the incomplete context for replay upon resume. Fixes: 1863e302 ("drm/i915/execlists: Always reset the context's RING registers") Signed-off-by:
-
Tvrtko Ursulin authored
Commit f774f096 ("drm/i915/guc: Turn on GuC/HuC auto mode") changed the default from 0 to -1 but forgot to update the description. Signed-off-by:
-
Chris Wilson authored
Avoid a global idle barrier by reconfiguring each context by rewriting them with MI_STORE_DWORD from the kernel context. v2: We only need to determine the desired register values once, they are the same for all contexts. v3: Don't remove the kernel context from the list of known GEM contexts; the world is not ready for that yet. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190716213443.9874-1-chris@chris-wilson.co.uk
-
- 16 Jul, 2019 4 commits
-
-
Chris Wilson authored
Apply the new radix shift helpers to extract the multi-level indices cleanly when inserting pte into the gtt tree. Signed-off-by:
-
Chris Wilson authored
Refactor the separate allocation routines into a single recursive function. Signed-off-by:
-
Chris Wilson authored
Preempt-to-busy uses a GPU semaphore to enforce an idle-barrier across preemption, but mediated gvt does not fully support semaphores. v2: Fiddle around with the flags and settle on using has-semaphores for the core bits so that we retain the ability to preempt our own semaphores. Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190709091233.8573-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
We cannot let the request be retired and freed while we are trying to dump it during error capture. It is not sufficient just to grab a reference to the request, as during retirement we may free the ring which we are also dumping. So take the engine lock to prevent retiring and freeing of the request. Reported-by:
Alex Shumsky <alexthreed@gmail.com> Fixes: 83c31783 ("drm/i915: Dump the ringbuffer of the active request for debugging") Signed-off-by:
-
- 15 Jul, 2019 4 commits
-
-
José Roberto de Souza authored
Right now we are aware of two cases that needs another hotplug retry: - Unpowered type-c dongles - HDMI slow unplug Both have a complete explanation in the code to schedule another run of the hotplug handler. It could have more checks to just trigger the retry in those two specific cases but why would sink signal a long pulse if there is no change? Also the drawback of running the hotplug handler again is really low and that could fix another cases that we are not aware. Also retrying for old DP ports(non-DDI) to make it consistent and not cause CI failures if those systems are connected to chamelium boards that will be used to simulate the issues reported in here. v2: Also retrying for old DP ports(non-DDI)(Imre) v4: Renamed INTEL_HOTPLUG_NOCHANGE to INTEL_HOTPLUG_UNCHANGED to keep it consistent(Rodrigo) Tested-by:
Timo Aaltonen <tjaalton@ubuntu.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Imre Deak authored
There is some scenarios that we are aware that sink probe can fail, so lets add the infrastructure to let hotplug() hook to request another probe after some time. v2: Handle shared HPD pins (Imre) v3: Rebased v4: Renamed INTEL_HOTPLUG_NOCHANGE to INTEL_HOTPLUG_UNCHANGED to keep it consistent(Rodrigo) v5: Making the working queue used explicit through all the callers to hotplug_work (Ville) Tested-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Matt Roper authored
Now that we distinguish between phy and port(ddi), mcc_port_to_ddc_pin should use the phy, not the DDI, for determining DDC pins. We're only converting the MCC function at the moment since EHL is the only platform that has configurations where port!=phy. Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712221641.21031-1-matthew.d.roper@intel.comReviewed-by:
-
Chris Wilson authored
GVT forces single port submission of individual requests. We do not enjoy the context amalgamation that the test depends upon for setting up the test (where port 0 has a large number of requests with a priority change somewhere in the middle). Under single request submission of gvt it is quite able for the preemption event to occur while another context is active and so there be a real need to act upon that preemption. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111108Signed-off-by:
-
- 13 Jul, 2019 7 commits
-
-
Daniele Ceraolo Spurio authored
Get rid of them to avoid more users being added while the guc code transitions to use gt more than i915. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Acked-by:
-
Daniele Ceraolo Spurio authored
We can get rid of a few more guc_to_i915 and start compartmentalizing interrupt management a bit more. We should be able to move more code in the future once the gt_pm code is also moved across to gt. Signed-off-by:
-
Daniele Ceraolo Spurio authored
With our HW interface logic moving from i915 to gt and with GuC and HuC being part of the gt HW, it makes sense to use the intel_gt structure instead of i915 as our reference object in GuC/HuC paths. Signed-off-by:
-
Daniele Ceraolo Spurio authored
All the intel_uc_* can now be moved to work on the intel_uc structure for better encapsulation of uc-related actions. Note: I've introduced uc_to_gt instead of uc_to_i915 because the aim is to move everything to be gt-focused in the medium term, so we would've had to replace it soon anyway. Signed-off-by:
-
Daniele Ceraolo Spurio authored
Being part of the GT HW, it make sense to keep the guc/huc structures inside the GT structure. To help with the encapsulation work done by the following patches, both structures are placed inside a new intel_uc container. Although this results in code with ugly nested dereferences (i915->gt.uc.guc...), it saves us the extra work required in moving the structures twice (i915 -> gt -> uc). The following patches will reduce the number of places where we try to access the guc/huc structures directly from i915 and reduce the ugliness. Signed-off-by:
-
Daniele Ceraolo Spurio authored
Both microcontrollers are part of the GT HW and are closely related to GT operations. To keep all the files cleanly together, they've been placed in their own subdir inside the gt/ folder Signed-off-by:
-
Daniele Ceraolo Spurio authored
The 16-bit guc irq vector is unchanged across gens, the only thing that moved is its position (from the upper 16 bits of the PM regs to its own register). Instead of duplicating all defines and functions to handle the 2 different positions, we can work on the vector and shift it as appropriate. While at it, update the handler to work on intel_guc. Signed-off-by:
-
