Some configuration items are messed up during conflict resolving.  For
example, STRICT_DEVMEM should not in testing menu, but kunit should.
This patch fixes all of them.

[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/20191209155653.7509-1-changbin.du@gmail.comSigned-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 0a432dcb ("mm: shrinker: make shrinker not depend on
memcg kmem"), shrinkers' idr is protected by CONFIG_MEMCG instead of
CONFIG_MEMCG_KMEM, so it makes no sense to protect shrinker idr replace
with CONFIG_MEMCG_KMEM.

And in the CONFIG_MEMCG && CONFIG_SLOB case, shrinker_idr contains only
shrinker, and it is deferred_split_shrinker.  But it is never actually
called, since idr_replace() is never compiled due to the wrong #ifdef.
The deferred_split_shrinker all the time is staying in half-registered
state, and it's never called for subordinate mem cgroups.

Link: http://lkml.kernel.org/r/1575486978-45249-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: 0a432dcb ("mm: shrinker: make shrinker not depend on memcg kmem")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>	[5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

syzkaller and the fault injector showed that I was wrong to assume that
we could ignore percpu shadow allocation failures.

Handle failures properly.  Merge all the allocated areas back into the
free list and release the shadow, then clean up and return NULL.  The
shadow is released unconditionally, which relies upon the fact that the
release function is able to tolerate pages not being present.

Also clean up shadows in the recovery path - currently they are not
released, which leaks a bit of memory.

Link: http://lkml.kernel.org/r/20191205140407.1874-3-dja@axtens.net
Fixes: 3c5c3cfb ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reported-by: syzbot+82e323920b78d54aaed5@syzkaller.appspotmail.com
Reported-by: syzbot+59b7daa4315e07a994f1@syzkaller.appspotmail.com
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan_release_vmalloc uses apply_to_page_range to release vmalloc
shadow.  Unfortunately, apply_to_page_range can allocate memory to fill
in page table entries, which is not what we want.

Also, kasan_release_vmalloc is called under free_vmap_area_lock, so if
apply_to_page_range does allocate memory, we get a sleep in atomic bug:

	BUG: sleeping function called from invalid context at mm/page_alloc.c:4681
	in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 15087, name:

	Call Trace:
	 __dump_stack lib/dump_stack.c:77 [inline]
	 dump_stack+0x199/0x216 lib/dump_stack.c:118
	 ___might_sleep.cold.97+0x1f5/0x238 kernel/sched/core.c:6800
	 __might_sleep+0x95/0x190 kernel/sched/core.c:6753
	 prepare_alloc_pages mm/page_alloc.c:4681 [inline]
	 __alloc_pages_nodemask+0x3cd/0x890 mm/page_alloc.c:4730
	 alloc_pages_current+0x10c/0x210 mm/mempolicy.c:2211
	 alloc_pages include/linux/gfp.h:532 [inline]
	 __get_free_pages+0xc/0x40 mm/page_alloc.c:4786
	 __pte_alloc_one_kernel include/asm-generic/pgalloc.h:21 [inline]
	 pte_alloc_one_kernel include/asm-generic/pgalloc.h:33 [inline]
	 __pte_alloc_kernel+0x1d/0x200 mm/memory.c:459
	 apply_to_pte_range mm/memory.c:2031 [inline]
	 apply_to_pmd_range mm/memory.c:2068 [inline]
	 apply_to_pud_range mm/memory.c:2088 [inline]
	 apply_to_p4d_range mm/memory.c:2108 [inline]
	 apply_to_page_range+0x77d/0xa00 mm/memory.c:2133
	 kasan_release_vmalloc+0xa7/0xc0 mm/kasan/common.c:970
	 __purge_vmap_area_lazy+0xcbb/0x1f30 mm/vmalloc.c:1313
	 try_purge_vmap_area_lazy mm/vmalloc.c:1332 [inline]
	 free_vmap_area_noflush+0x2ca/0x390 mm/vmalloc.c:1368
	 free_unmap_vmap_area mm/vmalloc.c:1381 [inline]
	 remove_vm_area+0x1cc/0x230 mm/vmalloc.c:2209
	 vm_remove_mappings mm/vmalloc.c:2236 [inline]
	 __vunmap+0x223/0xa20 mm/vmalloc.c:2299
	 __vfree+0x3f/0xd0 mm/vmalloc.c:2356
	 __vmalloc_area_node mm/vmalloc.c:2507 [inline]
	 __vmalloc_node_range+0x5d5/0x810 mm/vmalloc.c:2547
	 __vmalloc_node mm/vmalloc.c:2607 [inline]
	 __vmalloc_node_flags mm/vmalloc.c:2621 [inline]
	 vzalloc+0x6f/0x80 mm/vmalloc.c:2666
	 alloc_one_pg_vec_page net/packet/af_packet.c:4233 [inline]
	 alloc_pg_vec net/packet/af_packet.c:4258 [inline]
	 packet_set_ring+0xbc0/0x1b50 net/packet/af_packet.c:4342
	 packet_setsockopt+0xed7/0x2d90 net/packet/af_packet.c:3695
	 __sys_setsockopt+0x29b/0x4d0 net/socket.c:2117
	 __do_sys_setsockopt net/socket.c:2133 [inline]
	 __se_sys_setsockopt net/socket.c:2130 [inline]
	 __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2130
	 do_syscall_64+0xfa/0x780 arch/x86/entry/common.c:294
	 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Switch to using the apply_to_existing_page_range() helper instead, which
won't allocate memory.

[akpm@linux-foundation.org: s/apply_to_existing_pages/apply_to_existing_page_range/]
Link: http://lkml.kernel.org/r/20191205140407.1874-2-dja@axtens.net
Fixes: 3c5c3cfb ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

apply_to_page_range() takes an address range, and if any parts of it are
not covered by the existing page table hierarchy, it allocates memory to
fill them in.

In some use cases, this is not what we want - we want to be able to
operate exclusively on PTEs that are already in the tables.

Add apply_to_existing_page_range() for this.  Adjust the walker
functions for apply_to_page_range to take 'create', which switches them
between the old and new modes.

This will be used in KASAN vmalloc.

[akpm@linux-foundation.org: reduce code duplication]
[akpm@linux-foundation.org: s/apply_to_existing_pages/apply_to_existing_page_range/]
[akpm@linux-foundation.org: initialize __apply_to_page_range::err]
Link: http://lkml.kernel.org/r/20191205140407.1874-1-dja@axtens.netSigned-off-by: Daniel Axtens <dja@axtens.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Qian Cai <cai@lca.pw>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With CONFIG_KASAN_VMALLOC=y any use of memory obtained via vm_map_ram()
will crash because there is no shadow backing that memory.

Instead of sprinkling additional kasan_populate_vmalloc() calls all over
the vmalloc code, move it into alloc_vmap_area(). This will fix
vm_map_ram() and simplify the code a bit.

[aryabinin@virtuozzo.com: v2]
  Link: http://lkml.kernel.org/r/20191205095942.1761-1-aryabinin@virtuozzo.comLink: http://lkml.kernel.org/r/20191204204534.32202-1-aryabinin@virtuozzo.com
Fixes: 3c5c3cfb ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Alexander Potapenko <glider@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull btrfs fixes from David Sterba:
 "A mix of regression fixes and regular fixes for stable trees:

   - fix swapped error messages for qgroup enable/rescan

   - fixes for NO_HOLES feature with clone range

   - fix deadlock between iget/srcu lock/synchronize srcu while freeing
     an inode

   - fix double lock on subvolume cross-rename

   - tree log fixes
      * fix missing data checksums after replaying a log tree
      * also teach tree-checker about this problem
      * skip log replay on orphaned roots

   - fix maximum devices constraints for RAID1C -3 and -4

   - send: don't print warning on read-only mount regarding orphan
     cleanup

   - error handling fixes"

* tag 'for-5.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: send: remove WARN_ON for readonly mount
  btrfs: do not leak reloc root if we fail to read the fs root
  btrfs: skip log replay on orphaned roots
  btrfs: handle ENOENT in btrfs_uuid_tree_iterate
  btrfs: abort transaction after failed inode updates in create_subvol
  Btrfs: fix hole extent items with a zero size after range cloning
  Btrfs: fix removal logic of the tree mod log that leads to use-after-free issues
  Btrfs: make tree checker detect checksum items with overlapping ranges
  Btrfs: fix missing data checksums after replaying a log tree
  btrfs: return error pointer from alloc_test_extent_buffer
  btrfs: fix devs_max constraints for raid1c3 and raid1c4
  btrfs: tree-checker: Fix error format string for size_t
  btrfs: don't double lock the subvol_sem for rename exchange
  btrfs: handle error in btrfs_cache_block_group
  btrfs: do not call synchronize_srcu() in inode_tree_del
  Btrfs: fix cloning range with a hole when using the NO_HOLES feature
  btrfs: Fix error messages in qgroup_rescan_init

The comment says "this should never fail", but it definitely can fail
when you have odd initial boot filesystems, or kernel configurations.

So get the error handling right: filp_open() returns an error pointer.
Reported-by: Jesse Barnes <jsbarnes@google.com>
Reported-by: youling 257 <youling257@gmail.com>
Fixes: 8243186f ("fs: remove ksys_dup()")
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'regulator-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A small set of fixes for mostly minor issues here, the only real code
  ones are Wen Yang's fixes for error handling in the core and Christian
  Marussi's list_voltage() change which is a fix for disruptively bad
  performance for regulators with continuous voltage control (which are
  rare)"

* tag 'regulator-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: rn5t618: fix module aliases
  regulator: max77650: add of_match table
  regulator: core: avoid unneeded .list_voltage calls
  regulator: s5m8767: Fix a warning message
  regulator: core: fix regulator_register() error paths to properly release rdev
  regulator: fix use after free issue

Pull spi fixes from Mark Brown:
 "A relatively large set of fixes here, the biggest part of it is for
  fallout from the GPIO descriptor rework that affected several of the
  devices with usable native chip select support. There's also some new
  PCI IDs for Intel Jasper Lake devices.

  The conversion to platform_get_irq() in the fsl driver is an
  incremental fix for build errors introduced on SPARC by the earlier
  fix for error handling in probe in that driver"

* tag 'spi-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl: use platform_get_irq() instead of of_irq_to_resource()
  spi: nxp-fspi: Ensure width is respected in spi-mem operations
  spi: spi-ti-qspi: Fix a bug when accessing non default CS
  spi: fsl: don't map irq during probe
  spi: spi-cavium-thunderx: Add missing pci_release_regions()
  spi: sprd: Fix the incorrect SPI register
  gpiolib: of: Make of_gpio_spi_cs_get_count static
  spi: fsl: Handle the single hardwired chipselect case
  gpio: Handle counting of Freescale chipselects
  spi: fsl: Fix GPIO descriptor support
  spi: dw: Correct handling of native chipselect
  spi: cadence: Correct handling of native chipselect
  spi: pxa2xx: Add support for Intel Jasper Lake

Pull x86 fix from Ingo Molnar:
 "Fix kexec booting with certain EFI memory map layouts"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage

Pull timer fixes from Ingo Molnar:
 "Add HPET quirks for the Intel 'Coffee Lake H' and 'Ice Lake' platforms"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel: Disable HPET on Intel Ice Lake platforms
  x86/intel: Disable HPET on Intel Coffee Lake H platforms

Pull scheduler fix from Ingo Molnar:
 "Fix the guest-nice cpustat values in /proc"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cputime, proc/stat: Fix incorrect guest nice cpustat value

Pull perf tooling fixes from Ingo  Molnar:
 "These are all perf tooling changes: most of them are fixes.

  Note that the large CPU count related fixes go beyond regression
  fixes, but the IPI-flood symptoms are severe enough that I think
  justifies their inclusion"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  perf vendor events s390: Remove name from L1D_RO_EXCL_WRITES description
  perf vendor events s390: Fix counter long description for DTLB1_GPAGE_WRITES
  libtraceevent: Allow custom libdir path
  perf header: Fix false warning when there are no duplicate cache entries
  perf metricgroup: Fix printing event names of metric group with multiple events
  perf/x86/pmu-events: Fix Kernel_Utilization metric
  perf top: Do not bail out when perf_env__read_cpuid() returns ENOSYS
  perf arch: Make the default get_cpuid() return compatible error
  tools headers kvm: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  perf inject: Fix processing of ID index for injected instruction tracing
  perf report: Bail out --mem-mode if mem info is not available
  perf report: Make -F more strict like -s
  perf report/top TUI: Replace pr_err() with ui__error()
  libtraceevent: Copy pkg-config file to output folder when using O=
  libtraceevent: Fix lib installation with O=
  perf kvm: Clarify the 'perf kvm' -i and -o command line options
  tools arch x86: Sync asm/cpufeatures.h with the kernel sources
  perf beauty: Add CLEAR_SIGHAND support for clone's flags arg
  ...

Pull locking fixes from Ingo Molnar:
 "Tone down mutex debugging complaints, and annotate/fix spinlock
  debugging data accesses for KCSAN"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "locking/mutex: Complain upon mutex API misuse in IRQ contexts"
  locking/spinlock/debug: Fix various data races

Pull EFI fixes from Ingo Molnar:
 "Protect presistent EFI memory reservations from kexec, fix EFIFB early
  console, EFI stub graphics output fixes and other misc fixes."

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Don't attempt to map RCI2 config table if it doesn't exist
  efi/earlycon: Remap entire framebuffer after page initialization
  efi: Fix efi_loaded_image_t::unload type
  efi/gop: Fix memory leak in __gop_query32/64()
  efi/gop: Return EFI_SUCCESS if a usable GOP was found
  efi/gop: Return EFI_NOT_FOUND if there are no usable GOPs
  efi/memreserve: Register reservations as 'reserved' in /proc/iomem

Merge tag 'perf-urgent-for-mingo-5.5-20191216' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes:

perf top:

 Arnaldo Carvalho de Melo:

 - Do not bail out when perf_env__read_cpuid() returns ENOSYS, which
   has been reported happening on aarch64.

perf metricgroup:

  Kajol Jain:

  - Fix printing event names of metric group with multiple events

vendor events:

x86:

  Ravi Bangoria:

  - Fix Kernel_Utilization metric.

s390:

  Ed Maste:

  - Fix counter long description for DTLB1_GPAGE_WRITES and L1D_RO_EXCL_WRITES.

perf header:

  Michael Petlan:

  - Fix false warning when there are no duplicate cache entries

libtraceevent:

  Sudip Mukherjee:

  - Allow custom libdir path

API headers:

  Arnaldo Carvalho de Melo:

  - Sync linux/kvm.h with the kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull ARM SoC fixes from Olof Johansson:
 "I didn't get a batch in this weekend, so here's what we queued up last
  week and today.

   - A couple of defconfigs add back debugfs -- it used to be implicitly
     enabled through CONFIG_TRACING, but 0e4a459f ("tracing:
     Remove unnecessary DEBUG_FS dependency") removed that.

   - The rest are mostly minor fixlets of the usual kind; some DT
     tweaks, a headerfile refactor that needs a build fix now, etc"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
  ARM: bcm: Add missing sentinel to bcm2711_compat[]
  ARM: shmobile: defconfig: Restore debugfs support
  bus: ti-sysc: Fix missing reset delay handling
  ARM: imx: Fix boot crash if ocotp is not found
  ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
  ARM: dts: imx6ul-evk: Fix peripheral regulator
  arm64: dts: ls1028a: fix reboot node
  ARM: mmp: include the correct cputype.h
  ARM: dts: am437x-gp/epos-evm: fix panel compatible
  arm64: dts: ls1028a: fix typo in TMU calibration data
  ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs
  ARM: dts: bcm283x: Fix critical trip point
  ARM: omap2plus_defconfig: Add back DEBUG_FS
  ARM: omap2plus_defconfig: enable NET_SWITCHDEV
  ARM: dts: am335x-sancloud-bbe: fix phy mode
  bus: ti-sysc: Fix missing force mstandby quirk handling
  reset: Do not register resource data for missing resets
  reset: Fix {of,devm}_reset_control_array_get kerneldoc return types
  reset: brcmstb: Remove resource checks
  dt-bindings: reset: Fix brcmstb-reset example
  ...

This pull request contains Broadcom ARM-based SoCs machine fixes for
5.5-rc1, please pull the following:

- H. Nikolaus adds a missing sentinel entry to the BCM2711 machine
  descriptor compatible array which would make multiplatform kernels fail
  to boot

* tag 'arm-soc/for-5.5/soc-fixes' of https://github.com/Broadcom/stblinux:
  ARM: bcm: Add missing sentinel to bcm2711_compat[]

Link: https://lore.kernel.org/r/20191216035701.15534-1-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes

Samsung fixes for v5.5

1. Restore debugfs support in exynos_defconfig (as now it is not
   selected as dependency of tracing).  Debugfs is required by systemd
   and several tests.
2. Maintainers updates.

* tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: exynos_defconfig: Restore debugfs support
  MAINTAINERS: Include Samsung SoC serial driver in Samsung SoC entry
  MAINTAINERS: Update Lukasz Luba's email address

Link: https://lore.kernel.org/r/20191215121316.32091-1-krzk@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes

Renesas fixes for v5.5

  - Restore debugfs support

* tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: shmobile: defconfig: Restore debugfs support

Link: https://lore.kernel.org/r/20191213213719.18122-1-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'linux-kselftest-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:

 - ftrace and safesetid test fixes from Masami Hiramatsu

 - Kunit fixes from Brendan Higgins, Iurii Zaikin, and Heidi Fahim

 - Kselftest framework fixes from SeongJae Park and Michael Ellerman

* tag 'linux-kselftest-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kselftest: Support old perl versions
  kselftest/runner: Print new line in print of timeout log
  selftests: Fix dangling documentation references to kselftest_module.sh
  Documentation: kunit: add documentation for kunit_tool
  Documentation: kunit: fix typos and gramatical errors
  kunit: testing kunit: Bug fix in test_run_timeout function
  fs/ext4/inode-test: Fix inode test on 32 bit platforms.
  selftests: safesetid: Fix Makefile to set correct test program
  selftests: safesetid: Check the return value of setuid/setgid
  selftests: safesetid: Move link library to LDLIBS
  selftests/ftrace: Fix multiple kprobe testcase
  selftests/ftrace: Do not to use absolute debugfs path
  selftests/ftrace: Fix ftrace test cases to check unsupported
  selftests/ftrace: Fix to check the existence of set_ftrace_filter

In case the new region gets merged into another one, the nr list node is
freed.  Checking its type while completing the merge algorithm leads to
a use-after-free.  Use new->type instead.

Fixes: 4dbd258f ("iommu: Revisit iommu_insert_resv_region() implementation")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Qian Cai <cai@lca.pw>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Stable <stable@vger.kernel.org> #v5.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The "trivial conversion" in commit cccaa5e3 ("init: use do_mount()
instead of ksys_mount()") was totally broken, since it didn't handle the
case of a NULL mount data pointer.  And while I had "tested" it (and
presumably Dominik had too) that bug was hidden by me having options.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Reported-by: Ondřej Jirman <megi@xff.cz>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-and-tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In 7fcfa9a2 an unintended prefix "Counter:18 Name:" was removed from
the description for L1D_RO_EXCL_WRITES, but the extra name remained in
the description.  Remove it too.

Fixes: 7fcfa9a2 ("perf list: Fix s390 counter long description for L1D_RO_EXCL_WRITES")
Signed-off-by: Ed Maste <emaste@freebsd.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Link: http://lore.kernel.org/lkml/20191212145346.5026-1-emaste@freefall.freebsd.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The cf_z13 counter DTLB1_GPAGE_WRITES included a prefix
'Counter:132\tName:'.

This is incorrect; remove the prefix as with 7fcfa9a2 for cf_z14.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Link: http://lore.kernel.org/lkml/20191212143446.88582-1-emaste@freefall.freebsd.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When I use prefix=/usr and try to install libtraceevent in my laptop it
tries to install in /usr/lib64. I am not having any folder as /usr/lib64
and also the debian policy doesnot allow installing in /usr/lib64. It
should be in /usr/lib/x86_64-linux-gnu/.

Quote: No package for a 64 bit architecture may install files in
	/usr/lib64/ or in a subdirectory of it.

ref: https://www.debian.org/doc/debian-policy/ch-opersys.html

Make it more flexible by allowing to mention libdir_relative while
installing so that distros can mention the path according to their
policy or use the default one.
Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191207111440.6574-1-sudipm.mukherjee@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Unlike irq_of_parse_and_map() which has a dummy definition on SPARC,
of_irq_to_resource() hasn't.

But as platform_get_irq() can be used instead and is generic, use it.
Reported-by: kbuild test robot <lkp@intel.com>
Suggested-by: Mark Brown <broonie@kernel.org>
Fixes: 	3194d253 ("spi: fsl: don't map irq during probe")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/091a277fd0b3356dca1e29858c1c96983fc9cb25.1576172743.git.christophe.leroy@c-s.frSigned-off-by: Mark Brown <broonie@kernel.org>

Make use of a core helper to ensure the desired width is respected
when calling spi-mem operators.

Otherwise only the SPI controller will be matched with the flash chip,
which might lead to wrong widths. Also consider the width specified by
the user in the device tree.

Fixes: a5356aef ("spi: spi-mem: Add driver for NXP FlexSPI controller")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20191211195730.26794-1-michael@walle.ccSigned-off-by: Mark Brown <broonie@kernel.org>

platform device aliases were missing, preventing
autoloading of module.

Fixes: 811b7006 ("regulator: rn5t618: add driver for Ricoh RN5T618 regulators")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20191211221600.29438-1-andreas@kemnade.infoSigned-off-by: Mark Brown <broonie@kernel.org>

commit 781fa0a9 ("ARM: bcm: Add support for BCM2711 SoC")

breaks boot of many other platforms (e.g. OMAP or i.MX6) if
CONFIG_ARCH_BCM2835 is enabled in addition to some multiplatform
config (e.g. omap2plus_defconfig). The symptom is that the OMAP
based board does not show any activity beyond "Starting Kernel ..."
even with earlycon.

Reverting the mentioned commit makes it work again.

The real fix is to add the missing NULL sentinel to the
bcm2711_compat[] variable-length array.

Fixes: 781fa0a9 ("ARM: bcm: Add support for BCM2711 SoC")
Acked-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Pull rdma fixes from Doug Ledford:
 "A small collection of -rc fixes. Mostly. One API addition, but that's
  because we wanted to use it in a fix. There's also a bug fix that is
  going to render the 5.5 kernel's soft-RoCE driver incompatible with
  all soft-RoCE versions prior, but it's required to actually implement
  the protocol according to the RoCE spec and required in order for the
  soft-RoCE driver to be able to successfully work with actual RoCE
  hardware.

  Summary:

   - Update Steve Wise info

   - Fix for soft-RoCE crc calculations (will break back compatibility,
     but only with the soft-RoCE driver, which has had this bug since it
     was introduced and it is an on-the-wire bug, but will make
     soft-RoCE fully compatible with real RoCE hardware)

   - cma init fixup

   - counters oops fix

   - fix for mlx4 init/teardown sequence

   - fix for mkx5 steering rules

   - introduce a cleanup API, which isn't a fix, but we want to use it
     in the next fix

   - fix for mlx5 memory management that uses API in previous patch"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/mlx5: Fix device memory flows
  IB/core: Introduce rdma_user_mmap_entry_insert_range() API
  IB/mlx5: Fix steering rule of drop and count
  IB/mlx4: Follow mirror sequence of device add during device removal
  RDMA/counter: Prevent auto-binding a QP which are not tracked with res
  rxe: correctly calculate iCRC for unaligned payloads
  Update mailmap info for Steve Wise
  RDMA/cma: add missed unregister_pernet_subsys in init failure

Pull RISC-V fixes from Paul Walmsley:
 "Two minor build fixes:

   - Fix builds of the ELF loader when built with 'make -j1' (nommu
     only)

   - Fix CONFIG_SOC_SIFIVE builds when CONFIG_TTY is disabled (found
     during randconfig testing)"

* tag 'riscv/for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: only select serial sifive if TTY is enabled
  riscv: Fix build dependency for loader

Pull xen fixes from Juergen Gross:
 "Two fixes: one for a resource accounting bug in some configurations
  and a fix for another patch which went into rc1"

* tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: fix ballooned page accounting without hotplug enabled
  xen-blkback: prevent premature module unload

Pull ksys_mount() and ksys_dup() removal from Dominik Brodowski:
 "This small series replaces all in-kernel calls to the
  userspace-focused ksys_mount() and ksys_dup() with calls to
  kernel-centric functions:

  For each replacement of ksys_mount() with do_mount(), one needs to
  verify that the first and third parameter (char *dev_name, char *type)
  are strings allocated in kernelspace and that the fifth parameter
  (void *data) is either NULL or refers to a full page (only occurence
  in init/do_mounts.c::do_mount_root()). The second and fourth
  parameters (char *dir_name, unsigned long flags) are passed by
  ksys_mount() to do_mount() unchanged, and therefore do not require
  particular care.

  Moreover, instead of pretending to be userspace, the opening of
  /dev/console as stdin/stdout/stderr can be implemented using in-kernel
  functions as well. Thereby, ksys_dup() can be removed for good"

[ This doesn't get rid of the special "kernel init runs with KERNEL_DS"
  case, but it at least removes _some_ of the users of "treat kernel
  pointers as user pointers for our magical init sequence".

  One day we'll hopefully be rid of it all, and can initialize our
  init_thread addr_limit to USER_DS.    - Linus ]

* 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  fs: remove ksys_dup()
  init: unify opening /dev/console as stdin/stdout/stderr
  init: use do_mount() instead of ksys_mount()
  initrd: use do_mount() instead of ksys_mount()
  devtmpfs: use do_mount() instead of ksys_mount()

Merge tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull fall through fix from Gustavo Silva:
 "Fix compile error on sh by marking expected switch fall-through"

* tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  sh: kgdb: Mark expected switch fall-throughs

Pull SCSI fixes from James Bottomley:
 "24 fixes, all in drivers. The lion's share (16) are qla2xxx and the
  rest are iscsi (3), ufs (2), smarpqi, lpfc and libsas"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
  scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func
  scsi: iscsi: Fix a potential deadlock in the timeout handler
  scsi: smartpqi: Update attribute name to `driver_version`
  scsi: libsas: stop discovering if oob mode is disconnected
  scsi: ufs: Disable autohibern8 feature in Cadence UFS
  scsi: iscsi: qla4xxx: fix double free in probe
  scsi: ufs: Give an unique ID to each ufs-bsg
  scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB
  scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI
  scsi: qla2xxx: Don't defer relogin unconditonally
  scsi: qla2xxx: Send Notify ACK after N2N PLOGI
  scsi: qla2xxx: Configure local loop for N2N target
  scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length
  scsi: qla2xxx: Don't call qlt_async_event twice
  scsi: qla2xxx: Allow PLOGI in target mode
  scsi: qla2xxx: Change discovery state before PLOGI
  scsi: qla2xxx: Drop superfluous INIT_WORK of del_work
  scsi: qla2xxx: Initialize free_work before flushing it
  scsi: qla2xxx: Use explicit LOGO in target mode
  scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd
  ...

Pull char/misc driver fixes from Greg KH:
 "Here are six small fixes for some reported char/misc driver issues:

   - fix build warnings with new 'awk' with the raid6 code

   - four interconnect driver bugfixes

   - binder fix for reported problem

  All of these except the binder fix have been in linux-next with no
  reported issues. The binder fix is "new" but Todd says it is good as
  he has tested it :)"

* tag 'char-misc-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: fix incorrect calculation for num_valid
  interconnect: qcom: msm8974: Walk the list safely on node removal
  interconnect: qcom: qcs404: Walk the list safely on node removal
  interconnect: qcom: sdm845: Walk the list safely on node removal
  interconnect: qcom: Fix Kconfig indentation
  lib: raid6: fix awk build warnings

Pull driver core fixes from Greg KH:
 "Here are two small driver core fixes to resolve some reported issues

  The first is to handle the much-reported (by the build systems)
  problem that superH does not boot anymore.

  The second handles an issue in the new platform logic that a number of
  people ran into with the automated tests in kbuild

  Both of these have been in linux-next with no reported issues"

* tag 'driver-core-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  drivers: Fix boot problem on SuperH
  of/platform: Unconditionally pause/resume sync state during kernel init