Pull arm64 updates from Catalin Marinas:

 - VMAP_STACK support, allowing the kernel stacks to be allocated in the
   vmalloc space with a guard page for trapping stack overflows. One of
   the patches introduces THREAD_ALIGN and changes the generic
   alloc_thread_stack_node() to use this instead of THREAD_SIZE (no
   functional change for other architectures)

 - Contiguous PTE hugetlb support re-enabled (after being reverted a
   couple of times). We now have the semantics agreed in the generic mm
   layer together with API improvements so that the architecture code
   can detect between contiguous and non-contiguous huge PTEs

 - Initial support for persistent memory on ARM: DC CVAP instruction
   exposed to user space (HWCAP) and the in-kernel pmem API implemented

 - raid6 improvements for arm64: faster algorithm for the delta syndrome
   and implementation of the recovery routines using Neon

 - FP/SIMD refactoring and removal of support for Neon in interrupt
   context. This is in preparation for full SVE support

 - PTE accessors converted from inline asm to cmpxchg so that we can use
   LSE atomics if available (ARMv8.1)

 - Perf support for Cortex-A35 and A73

 - Non-urgent fixes and cleanups

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits)
  arm64: cleanup {COMPAT_,}SET_PERSONALITY() macro
  arm64: introduce separated bits for mm_context_t flags
  arm64: hugetlb: Cleanup setup_hugepagesz
  arm64: Re-enable support for contiguous hugepages
  arm64: hugetlb: Override set_huge_swap_pte_at() to support contiguous hugepages
  arm64: hugetlb: Override huge_pte_clear() to support contiguous hugepages
  arm64: hugetlb: Handle swap entries in huge_pte_offset() for contiguous hugepages
  arm64: hugetlb: Add break-before-make logic for contiguous entries
  arm64: hugetlb: Spring clean huge pte accessors
  arm64: hugetlb: Introduce pte_pgprot helper
  arm64: hugetlb: set_huge_pte_at Add WARN_ON on !pte_present
  arm64: kexec: have own crash_smp_send_stop() for crash dump for nonpanic cores
  arm64: dma-mapping: Mark atomic_pool as __ro_after_init
  arm64: dma-mapping: Do not pass data to gen_pool_set_algo()
  arm64: Remove the !CONFIG_ARM64_HW_AFDBM alternative code paths
  arm64: Ignore hardware dirty bit updates in ptep_set_wrprotect()
  arm64: Move PTE_RDONLY bit handling out of set_pte_at()
  kvm: arm64: Convert kvm_set_s2pte_readonly() from inline asm to cmpxchg()
  arm64: Convert pte handling from inline asm to using (cmp)xchg
  arm64: neon/efi: Make EFI fpsimd save/restore variables static
  ...

Pull s390 updates from Martin Schwidefsky:
 "The first part of the s390 updates for 4.14:

   - Add machine type 0x3906 for IBM z14

   - Add IBM z14 TLB flushing improvements for KVM guests

   - Exploit the TOD clock epoch extension to provide a continuous TOD
     clock afer 2042/09/17

   - Add NIAI spinlock hints for IBM z14

   - Rework the vmcp driver and use CMA for the respone buffer of z/VM
     CP commands

   - Drop some s390 specific asm headers and use the generic version

   - Add block discard for DASD-FBA devices under z/VM

   - Add average request times to DASD statistics

   - A few of those constify patches which seem to be in vogue right now

   - Cleanup and bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (50 commits)
  s390/mm: avoid empty zero pages for KVM guests to avoid postcopy hangs
  s390/dasd: Add discard support for FBA devices
  s390/zcrypt: make CPRBX const
  s390/uaccess: avoid mvcos jump label
  s390/mm: use generic mm_hooks
  s390/facilities: fix typo
  s390/vmcp: simplify vmcp_response_free()
  s390/topology: Remove the unused parent_node() macro
  s390/dasd: Change unsigned long long to unsigned long
  s390/smp: convert cpuhp_setup_state() return code to zero on success
  s390: fix 'novx' early parameter handling
  s390/dasd: add average request times to dasd statistics
  s390/scm: use common completion path
  s390/pci: log changes to uid checking
  s390/vmcp: simplify vmcp_ioctl()
  s390/vmcp: return -ENOTTY for unknown ioctl commands
  s390/vmcp: split vmcp header file and move to uapi
  s390/vmcp: make use of contiguous memory allocator
  s390/cpcmd,vmcp: avoid GFP_DMA allocations
  s390/vmcp: fix uaccess check and avoid undefined behavior
  ...

Pull alpha updates from Matt Turner:
 "This contains some small clean up patches I've neglected, and some
  build improvements from Ben Hutchings"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: math-emu: Fix modular build
  alpha: Restore symbol versions for symbols exported from assembly
  alpha: defconfig: Cleanup from old Kconfig options
  alpha: use kobj_to_dev()
  alpha: squash lines for immediate return
  alpha: kernel: Use vma_pages()
  alpha: silence a buffer overflow warning
  alpha: marvel: make use of raw_spinlock variants
  alpha: cleanup: remove __NR_sys_epoll_*, leave __NR_epoll_*
  alpha: use generic fb.h

Pull parisc updates from Helge Deller:
 "Major changes include:

   - Full support of the firmware Page Deallocation Table with
     MADV_HWPOISON and MADV_SOFT_OFFLINE. A kernel thread scans
     regularily for new bad memory pages.

   - Full support for self-extracting kernel.

   - Added UBSAN support.

   - Lots of section mismatch fixes across all parisc drivers.

   - Added examples for %pF and %pS usage in printk-formats.txt"

* 'parisc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (28 commits)
  printk-formats.txt: Add examples for %pF and %pS usage
  parisc: Fix up devices below a PCI-PCI MegaRAID controller bridge
  parisc/core: Fix section mismatches
  parisc/ipmi_si_intf: Fix section mismatches on parisc platform
  parisc/input/hilkbd: Fix section mismatches
  parisc/net/lasi_82596: Fix section mismatches
  parisc/serio: Fix section mismatches in gscps2 and hp_sdc drivers
  parisc: Fix section mismatches in parisc core drivers
  parisc/parport_gsc: Fix section mismatches
  parisc/scsi/lasi700: Fix section mismatches
  parisc/scsi/zalon: Fix section mismatches
  parisc/8250_gsc: Fix section mismatches
  parisc/mux: Fix section mismatches
  parisc/sticore: Fix section mismatches
  parisc/harmony: Fix section mismatches
  parisc: Wire up support for self-extracting kernel
  parisc: Make existing core files reuseable for bootloader
  parisc: Add core code for self-extracting kernel
  parisc: Enable UBSAN support
  parisc/random: Add machine specific randomness
  ...

Pull m68k updates from Geert Uytterhoeven:

  - restore symbol versions for symbols exported from assembly

  - defconfig updates

  - Mac fixes

* tag 'm68k-for-v4.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/mac: Avoid soft-lockup warning after mach_power_off
  m68k/mac: Don't hang waiting for Cuda power-down command
  m68k: Restore symbol versions for symbols exported from assembly
  m68k/defconfig: Update defconfigs for v4.13-rc1

Pull x86 apic updates from Thomas Gleixner:
 "This update provides:

   - Cleanup of the IDT management including the removal of the extra
     tracing IDT. A first step to cleanup the vector management code.

   - The removal of the paravirt op adjust_exception_frame. This is a
     XEN specific issue, but merged through this branch to avoid nasty
     merge collisions

   - Prevent dmesg spam about the TSC DEADLINE bug, when the CPU has
     disabled the TSC DEADLINE timer in CPUID.

   - Adjust a debug message in the ioapic code to print out the
     information correctly"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
  x86/idt: Fix the X86_TRAP_BP gate
  x86/xen: Get rid of paravirt op adjust_exception_frame
  x86/eisa: Add missing include
  x86/idt: Remove superfluous ALIGNment
  x86/apic: Silence "FW_BUG TSC_DEADLINE disabled due to Errata" on CPUs without the feature
  x86/idt: Remove the tracing IDT leftovers
  x86/idt: Hide set_intr_gate()
  x86/idt: Simplify alloc_intr_gate()
  x86/idt: Deinline setup functions
  x86/idt: Remove unused functions/inlines
  x86/idt: Move interrupt gate initialization to IDT code
  x86/idt: Move APIC gate initialization to tables
  x86/idt: Move regular trap init to tables
  x86/idt: Move IST stack based traps to table init
  x86/idt: Move debug stack init to table based
  x86/idt: Switch early trap init to IDT tables
  x86/idt: Prepare for table based init
  x86/idt: Move early IDT setup out of 32-bit asm
  x86/idt: Move early IDT handler setup to IDT code
  x86/idt: Consolidate IDT invalidation
  ...

Pull x86 cache quality monitoring update from Thomas Gleixner:
 "This update provides a complete rewrite of the Cache Quality
  Monitoring (CQM) facility.

  The existing CQM support was duct taped into perf with a lot of issues
  and the attempts to fix those turned out to be incomplete and
  horrible.

  After lengthy discussions it was decided to integrate the CQM support
  into the Resource Director Technology (RDT) facility, which is the
  obvious choise as in hardware CQM is part of RDT. This allowed to add
  Memory Bandwidth Monitoring support on top.

  As a result the mechanisms for allocating cache/memory bandwidth and
  the corresponding monitoring mechanisms are integrated into a single
  management facility with a consistent user interface"

* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  x86/intel_rdt: Turn off most RDT features on Skylake
  x86/intel_rdt: Add command line options for resource director technology
  x86/intel_rdt: Move special case code for Haswell to a quirk function
  x86/intel_rdt: Remove redundant ternary operator on return
  x86/intel_rdt/cqm: Improve limbo list processing
  x86/intel_rdt/mbm: Fix MBM overflow handler during CPU hotplug
  x86/intel_rdt: Modify the intel_pqr_state for better performance
  x86/intel_rdt/cqm: Clear the default RMID during hotcpu
  x86/intel_rdt: Show bitmask of shareable resource with other executing units
  x86/intel_rdt/mbm: Handle counter overflow
  x86/intel_rdt/mbm: Add mbm counter initialization
  x86/intel_rdt/mbm: Basic counting of MBM events (total and local)
  x86/intel_rdt/cqm: Add CPU hotplug support
  x86/intel_rdt/cqm: Add sched_in support
  x86/intel_rdt: Introduce rdt_enable_key for scheduling
  x86/intel_rdt/cqm: Add mount,umount support
  x86/intel_rdt/cqm: Add rmdir support
  x86/intel_rdt: Separate the ctrl bits from rmdir
  x86/intel_rdt/cqm: Add mon_data
  x86/intel_rdt: Prepare for RDT monitor data support
  ...

Pull CPU hotplug fix from Thomas Gleixner:
 "A single fix to handle the removal of the first dynamic CPU hotplug
  state correctly"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp/hotplug: Handle removal correctly in cpuhp_store_callbacks()

Pull irq updates from Thomas Gleixner:
 "The interrupt subsystem delivers this time:

   - Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support

   - Initial GIC-V4 support

   - Consolidation of the FSL MSI support

   - Utilize the effective affinity interface in various ARM irqchip
     drivers

   - Yet another interrupt chip driver (UniPhier AIDET)

   - Bulk conversion of the irq chip driver to use %pOF

   - The usual small fixes and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
  irqchip/ls-scfg-msi: Add MSI affinity support
  irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support
  irqchip/ls-scfg-msi: Add LS1046a MSI support
  arm64: dts: ls1046a: Add MSI dts node
  arm64: dts: ls1043a: Share all MSIs
  arm: dts: ls1021a: Share all MSIs
  arm64: dts: ls1043a: Fix typo of MSI compatible string
  arm: dts: ls1021a: Fix typo of MSI compatible string
  irqchip/ls-scfg-msi: Fix typo of MSI compatible strings
  irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask
  irqchip/mmp: Make mmp_intc_conf const
  irqchip/gic: Make irq_chip const
  irqchip/gic-v3: Advertise GICv4 support to KVM
  irqchip/gic-v4: Enable low-level GICv4 operations
  irqchip/gic-v4: Add some basic documentation
  irqchip/gic-v4: Add VLPI configuration interface
  irqchip/gic-v4: Add VPE command interface
  irqchip/gic-v4: Add per-VM VPE domain creation
  irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs
  irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared
  ...

Pull timer fixes from Thomas Gleixner:
 "A rather small update for the time(r) subsystem:

   - A new clocksource driver IMX-TPM

   - Minor fixes to the alarmtimer facility

   - Device tree cleanups for Renesas drivers

   - A new kselftest and fixes for the timer related tests

   - Conversion of the clocksource drivers to use %pOF

   - Use the proper helpers to access rlimits in the posix-cpu-timer
     code"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Ensure RTC module is not unloaded
  clocksource: Convert to using %pOF instead of full_name
  clocksource/drivers/bcm2835: Remove message for a memory allocation failure
  devicetree: bindings: Remove deprecated properties
  devicetree: bindings: Remove unused 32-bit CMT bindings
  devicetree: bindings: Deprecate property, update example
  devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings
  devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings
  devicetree: bindings: Remove sh7372 CMT binding
  clocksource/drivers/imx-tpm: Add imx tpm timer support
  dt-bindings: timer: Add nxp tpm timer binding doc
  posix-cpu-timers: Use dedicated helper to access rlimit values
  alarmtimer: Fix unavailable wake-up source in sysfs
  timekeeping: Use proper timekeeper for debug code
  kselftests: timers: set-timer-lat: Add one-shot timer test cases
  kselftests: timers: set-timer-lat: Tweak reporting when timer fires early
  kselftests: timers: freq-step: Fix build warning
  kselftests: timers: freq-step: Define ADJ_SETOFFSET if device has older kernel headers

Pull x86 mm changes from Ingo Molnar:
 "PCID support, 5-level paging support, Secure Memory Encryption support

  The main changes in this cycle are support for three new, complex
  hardware features of x86 CPUs:

   - Add 5-level paging support, which is a new hardware feature on
     upcoming Intel CPUs allowing up to 128 PB of virtual address space
     and 4 PB of physical RAM space - a 512-fold increase over the old
     limits. (Supercomputers of the future forecasting hurricanes on an
     ever warming planet can certainly make good use of more RAM.)

     Many of the necessary changes went upstream in previous cycles,
     v4.14 is the first kernel that can enable 5-level paging.

     This feature is activated via CONFIG_X86_5LEVEL=y - disabled by
     default.

     (By Kirill A. Shutemov)

   - Add 'encrypted memory' support, which is a new hardware feature on
     upcoming AMD CPUs ('Secure Memory Encryption', SME) allowing system
     RAM to be encrypted and decrypted (mostly) transparently by the
     CPU, with a little help from the kernel to transition to/from
     encrypted RAM. Such RAM should be more secure against various
     attacks like RAM access via the memory bus and should make the
     radio signature of memory bus traffic harder to intercept (and
     decrypt) as well.

     This feature is activated via CONFIG_AMD_MEM_ENCRYPT=y - disabled
     by default.

     (By Tom Lendacky)

   - Enable PCID optimized TLB flushing on newer Intel CPUs: PCID is a
     hardware feature that attaches an address space tag to TLB entries
     and thus allows to skip TLB flushing in many cases, even if we
     switch mm's.

     (By Andy Lutomirski)

  All three of these features were in the works for a long time, and
  it's coincidence of the three independent development paths that they
  are all enabled in v4.14 at once"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (65 commits)
  x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y)
  x86/mm: Use pr_cont() in dump_pagetable()
  x86/mm: Fix SME encryption stack ptr handling
  kvm/x86: Avoid clearing the C-bit in rsvd_bits()
  x86/CPU: Align CR3 defines
  x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages
  acpi, x86/mm: Remove encryption mask from ACPI page protection type
  x86/mm, kexec: Fix memory corruption with SME on successive kexecs
  x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt
  x86/mm/dump_pagetables: Speed up page tables dump for CONFIG_KASAN=y
  x86/mm: Implement PCID based optimization: try to preserve old TLB entries using PCID
  x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y
  x86/mm: Allow userspace have mappings above 47-bit
  x86/mm: Prepare to expose larger address space to userspace
  x86/mpx: Do not allow MPX if we have mappings above 47-bit
  x86/mm: Rename tasksize_32bit/64bit to task_size_32bit/64bit()
  x86/xen: Redefine XEN_ELFNOTE_INIT_P2M using PUD_SIZE * PTRS_PER_PUD
  x86/mm/dump_pagetables: Fix printout of p4d level
  x86/mm/dump_pagetables: Generalize address normalization
  x86/boot: Fix memremap() related build failure
  ...

Commit 00fc0e0d ("alpha: move exports to actual definitions") also
removed the exports of the math emulator hooks, which are defined in C
code.  In case anyone cares about the option of CONFIG_MATHEMU=m, add
exports next to those definitions.  Also add a MODULE_LICENSE.

Fixes: 00fc0e0d ("alpha: move exports to actual definitions")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Add <asm/asm-prototypes.h> so that genksyms knows the types of
these symbols and can generate CRCs for them.

Fixes: 00fc0e0d ("alpha: move exports to actual definitions")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Remove old, dead Kconfig options (in order appearing in this commit):
 - IP_NF_QUEUE: commit 3dd6664f ("netfilter: remove unused "config
   IP_NF_QUEUE"");
 - AUTOFS_FS: commit 561c5cf9 ("staging: Remove autofs3");
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Use kobj_to_dev() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Remove unneeded variables and assignments.

While we are here, fix the coding style of SMC37c669_read_config():
  - replace whitespaces at the start of lines with tabs
  - remove unneeded whitespaces around parentheses
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Replace explicit computation of vma page count by a call to
vma_pages()
Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

We check that "member" is in bounds for the first line, but we also use
it on the next line without checking which is a mistake.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

The alpha/marvel code currently implements an irq_chip for handling
interrupts; due to how irq_chip handling is done, it's necessary for the
irq_chip methods to be invoked from hardirq context, even on a a
real-time kernel.  Because the spinlock_t type becomes a "sleeping"
spinlock w/ RT kernels, it is not suitable to be used with irq_chips.

A quick audit of the operations under the lock reveal that they do only
minimal, bounded work, and are therefore safe to do under a raw spinlock.
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

__NR_sys_epoll_create and friends are alpha-specific
while __NR_epoll_create is a generic name for other
arches.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>

The arch uses a verbatim copy of the asm-generic version and does not
add any own implemntations to the header, so use asm-generic/fb.h
instead of duplicating code.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Pull locking updates from Ingo Molnar:

 - Add 'cross-release' support to lockdep, which allows APIs like
   completions, where it's not the 'owner' who releases the lock, to be
   tracked. It's all activated automatically under
   CONFIG_PROVE_LOCKING=y.

 - Clean up (restructure) the x86 atomics op implementation to be more
   readable, in preparation of KASAN annotations. (Dmitry Vyukov)

 - Fix static keys (Paolo Bonzini)

 - Add killable versions of down_read() et al (Kirill Tkhai)

 - Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini)

 - Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra)

 - Remove smp_mb__before_spinlock() and convert its usages, introduce
   smp_mb__after_spinlock() (Peter Zijlstra)

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
  locking/lockdep/selftests: Fix mixed read-write ABBA tests
  sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK()
  acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse
  locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures
  smp: Avoid using two cache lines for struct call_single_data
  locking/lockdep: Untangle xhlock history save/restore from task independence
  locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being
  futex: Remove duplicated code and fix undefined behaviour
  Documentation/locking/atomic: Finish the document...
  locking/lockdep: Fix workqueue crossrelease annotation
  workqueue/lockdep: 'Fix' flush_work() annotation
  locking/lockdep/selftests: Add mixed read-write ABBA tests
  mm, locking/barriers: Clarify tlb_flush_pending() barriers
  locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive
  locking/lockdep: Explicitly initialize wq_barrier::done::map
  locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS
  locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config
  locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING
  locking/refcounts, x86/asm: Implement fast refcount overflow protection
  locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease
  ...

Pull syscall updates from Ingo Molnar:
 "Improve the security of set_fs(): we now check the address limit on a
  number of key platforms (x86, arm, arm64) before returning to
  user-space - without adding overhead to the typical system call fast
  path"

* 'x86-syscall-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64/syscalls: Check address limit on user-mode return
  arm/syscalls: Check address limit on user-mode return
  x86/syscalls: Check address limit on user-mode return

Pull x86 spinlock update from Ingo Molnar:
 "Convert an NMI lock to raw"

[ Clarification: it's not that the lock itself is NMI-safe, it's about
  NMI registration called from RT contexts  - Linus ]

* 'x86-spinlocks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/nmi: Use raw lock

Pull x86 microcode loading updates from Ingo Molnar:
 "Update documentation, improve robustness and fix a memory leak"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/intel: Improve microcode patches saving flow
  x86/microcode: Document the three loading methods
  x86/microcode/AMD: Free unneeded patch before exit from update_cache()

Pull x86 debug updates from Ingo Molnar:
 "Various fixes to the NUMA emulation code"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/numa_emulation: Recalculate numa_nodes_parsed from emulated nodes
  x86/numa_emulation: Assign physnode_mask directly from numa_nodes_parsed
  x86/numa_emulation: Refine the calculation of max_emu_nid and dfl_phys_nid

Pull x86 cpuid updates from Ingo Molnar:
 "AMD F17h related updates"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/amd: Hide unused legacy_fixup_core_id() function
  x86/cpu/amd: Derive L3 shared_cpu_map from cpu_llc_shared_mask
  x86/cpu/amd: Limit cpu_core_id fixup to families older than F17h

Pull x86 build updates from Ingo Molnar:
 "More Clang support related fixes"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Use cc-option to validate stack alignment parameter
  x86/build: Fix stack alignment for CLang
  x86/build: Drop unused mflags-y

Pull x86 boot updates from Ingo Molnar:
 "The main changes are KASL related fixes and cleanups: in particular we
  now exclude certain physical memory ranges as KASLR randomization
  targets that have proven to be unreliable (early-)RAM on some firmware
  versions"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/KASLR: Work around firmware bugs by excluding EFI_BOOT_SERVICES_* and EFI_LOADER_* from KASLR's choice
  x86/boot/KASLR: Prefer mirrored memory regions for the kernel physical address
  efi: Introduce efi_early_memdesc_ptr to get pointer to memmap descriptor
  x86/boot/KASLR: Rename process_e820_entry() into process_mem_region()
  x86/boot/KASLR: Switch to pass struct mem_vector to process_e820_entry()
  x86/boot/KASLR: Wrap e820 entries walking code into new function process_e820_entries()

Pull x86 asm updates from Ingo Molnar:

 - Introduce the ORC unwinder, which can be enabled via
   CONFIG_ORC_UNWINDER=y.

   The ORC unwinder is a lightweight, Linux kernel specific debuginfo
   implementation, which aims to be DWARF done right for unwinding.
   Objtool is used to generate the ORC unwinder tables during build, so
   the data format is flexible and kernel internal: there's no
   dependency on debuginfo created by an external toolchain.

   The ORC unwinder is almost two orders of magnitude faster than the
   (out of tree) DWARF unwinder - which is important for perf call graph
   profiling. It is also significantly simpler and is coded defensively:
   there has not been a single ORC related kernel crash so far, even
   with early versions. (knock on wood!)

   But the main advantage is that enabling the ORC unwinder allows
   CONFIG_FRAME_POINTERS to be turned off - which speeds up the kernel
   measurably:

   With frame pointers disabled, GCC does not have to add frame pointer
   instrumentation code to every function in the kernel. The kernel's
   .text size decreases by about 3.2%, resulting in better cache
   utilization and fewer instructions executed, resulting in a broad
   kernel-wide speedup. Average speedup of system calls should be
   roughly in the 1-3% range - measurements by Mel Gorman [1] have shown
   a speedup of 5-10% for some function execution intense workloads.

   The main cost of the unwinder is that the unwinder data has to be
   stored in RAM: the memory cost is 2-4MB of RAM, depending on kernel
   config - which is a modest cost on modern x86 systems.

   Given how young the ORC unwinder code is it's not enabled by default
   - but given the performance advantages the plan is to eventually make
   it the default unwinder on x86.

   See Documentation/x86/orc-unwinder.txt for more details.

 - Remove lguest support: its intended role was that of a temporary
   proof of concept for virtualization, plus its removal will enable the
   reduction (removal) of the paravirt API as well, so Rusty agreed to
   its removal. (Juergen Gross)

 - Clean up and fix FSGS related functionality (Andy Lutomirski)

 - Clean up IO access APIs (Andy Shevchenko)

 - Enhance the symbol namespace (Jiri Slaby)

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
  objtool: Handle GCC stack pointer adjustment bug
  x86/entry/64: Use ENTRY() instead of ALIGN+GLOBAL for stub32_clone()
  x86/fpu/math-emu: Add ENDPROC to functions
  x86/boot/64: Extract efi_pe_entry() from startup_64()
  x86/boot/32: Extract efi_pe_entry() from startup_32()
  x86/lguest: Remove lguest support
  x86/paravirt/xen: Remove xen_patch()
  objtool: Fix objtool fallthrough detection with function padding
  x86/xen/64: Fix the reported SS and CS in SYSCALL
  objtool: Track DRAP separately from callee-saved registers
  objtool: Fix validate_branch() return codes
  x86: Clarify/fix no-op barriers for text_poke_bp()
  x86/switch_to/64: Rewrite FS/GS switching yet again to fix AMD CPUs
  selftests/x86/fsgsbase: Test selectors 1, 2, and 3
  x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps
  x86/fsgsbase/64: Fully initialize FS and GS state in start_thread_common
  x86/asm: Fix UNWIND_HINT_REGS macro for older binutils
  x86/asm/32: Fix regs_get_register() on segment registers
  x86/xen/64: Rearrange the SYSCALL entries
  x86/asm/32: Remove a bunch of '& 0xffff' from pt_regs segment reads
  ...

Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - fix affine wakeups (Peter Zijlstra)

   - improve CPU onlining (and general bootup) scalability on systems
     with ridiculous number (thousands) of CPUs (Peter Zijlstra)

   - sched/numa updates (Rik van Riel)

   - sched/deadline updates (Byungchul Park)

   - sched/cpufreq enhancements and related cleanups (Viresh Kumar)

   - sched/debug enhancements (Xie XiuQi)

   - various fixes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  sched/debug: Optimize sched_domain sysctl generation
  sched/topology: Avoid pointless rebuild
  sched/topology, cpuset: Avoid spurious/wrong domain rebuilds
  sched/topology: Improve comments
  sched/topology: Fix memory leak in __sdt_alloc()
  sched/completion: Document that reinit_completion() must be called after complete_all()
  sched/autogroup: Fix error reporting printk text in autogroup_create()
  sched/fair: Fix wake_affine() for !NUMA_BALANCING
  sched/debug: Intruduce task_state_to_char() helper function
  sched/debug: Show task state in /proc/sched_debug
  sched/debug: Use task_pid_nr_ns in /proc/$pid/sched
  sched/core: Remove unnecessary initialization init_idle_bootup_task()
  sched/deadline: Change return value of cpudl_find()
  sched/deadline: Make find_later_rq() choose a closer CPU in topology
  sched/numa: Scale scan period with tasks in group and shared/private
  sched/numa: Slow down scan rate if shared faults dominate
  sched/pelt: Fix false running accounting
  sched: Mark pick_next_task_dl() and build_sched_domain() as static
  sched/cpupri: Don't re-initialize 'struct cpupri'
  sched/deadline: Don't re-initialize 'struct cpudl'
  ...

Pull RAS fix from Ingo Molnar:
 "A single change fixing SMCA bank initialization on systems that don't
  have CPU0 enabled"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce/AMD: Allow any CPU to initialize the smca_banks array

Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - Add branch type profiling/tracing support. (Jin Yao)

   - Add the PERF_SAMPLE_PHYS_ADDR ABI to allow the tracing/profiling of
     physical memory addresses, where the PMU supports it. (Kan Liang)

   - Export some PMU capability details in the new
     /sys/bus/event_source/devices/cpu/caps/ sysfs directory. (Andi
     Kleen)

   - Aux data fixes and updates (Will Deacon)

   - kprobes fixes and updates (Masami Hiramatsu)

   - AMD uncore PMU driver fixes and updates (Janakarajan Natarajan)

  On the tooling side, here's a (limited!) list of highlights - there
  were many other changes that I could not list, see the shortlog and
  git history for details:

  UI improvements:

   - Implement a visual marker for fused x86 instructions in the
     annotate TUI browser, available now in 'perf report', more work
     needed to have it available as well in 'perf top' (Jin Yao)

     Further explanation from one of Jin's patches:

             │   ┌──cmpl   $0x0,argp_program_version_hook
       81.93 │   ├──je     20
             │   │  lock   cmpxchg %esi,0x38a9a4(%rip)
             │   │↓ jne    29
             │   │↓ jmp    43
       11.47 │20:└─→cmpxch %esi,0x38a999(%rip)

     That means the cmpl+je is a fused instruction pair and they should
     be considered together.

   - Record the branch type and then show statistics and info about in
     callchain entries (Jin Yao)

     Example from one of Jin's patches:

        # perf record -g -j any,save_type
        # perf report --branch-history --stdio --no-children

        38.50%  div.c:45                [.] main                    div
                |
                ---main div.c:42 (RET CROSS_2M cycles:2)
                   compute_flag div.c:28 (cycles:2)
                   compute_flag div.c:27 (RET CROSS_2M cycles:1)
                   rand rand.c:28 (cycles:1)
                   rand rand.c:28 (RET CROSS_2M cycles:1)
                   __random random.c:298 (cycles:1)
                   __random random.c:297 (COND_BWD CROSS_2M cycles:1)
                   __random random.c:295 (cycles:1)
                   __random random.c:295 (COND_BWD CROSS_2M cycles:1)
                   __random random.c:295 (cycles:1)
                   __random random.c:295 (RET CROSS_2M cycles:9)

  namespaces support:

   - Add initial support for namespaces, using setns to access files in
     namespaces, grabbing their build-ids, etc. (Krister Johansen)

  perf trace enhancements:

   - Beautify pkey_{alloc,free,mprotect} arguments in 'perf trace'
     (Arnaldo Carvalho de Melo)

   - Add initial 'clone' syscall args beautifier in 'perf trace'
     (Arnaldo Carvalho de Melo)

   - Ignore 'fd' and 'offset' args for MAP_ANONYMOUS in 'perf trace'
     (Arnaldo Carvalho de Melo)

   - Beautifiers for the 'cmd' arg of several ioctl types, including:
     sound, DRM, KVM, vhost virtio and perf_events. (Arnaldo Carvalho de
     Melo)

   - Add PERF_SAMPLE_CALLCHAIN and PERF_RECORD_MMAP[2] to 'perf data'
     CTF conversion, allowing CTF trace visualization tools to show
     callchains and to resolve symbols (Geneviève Bastien)

   - Beautify the fcntl syscall, which is an interesting one in the
     sense that infrastructure had to be put in place to change the
     formatters of some arguments according to the value in a previous
     one, i.e. cmd dictates how arg and the syscall return will be
     formatted. (Arnaldo Carvalho de Melo

  perf stat enhancements:

   - Use group read for event groups in 'perf stat', reducing overhead
     when groups are defined in the event specification, i.e. when using
     {} to enclose a list of events, asking them to be read at the same
     time, e.g.: "perf stat -e '{cycles,instructions}'" (Jiri Olsa)

  pipe mode improvements:

   - Process tracing data in 'perf annotate' pipe mode (David
     Carrillo-Cisneros)

   - Add header record types to pipe-mode, now this command:

        $ perf record -o - -e cycles sleep 1 | perf report --stdio --header

     Will show the same as in non-pipe mode, i.e. involving a perf.data
     file (David Carrillo-Cisneros)

  Vendor specific hardware event support updates/enhancements:

   - Update POWER9 vendor events tables (Sukadev Bhattiprolu)

   - Add POWER9 PMU events Sukadev (Bhattiprolu)

   - Support additional POWER8+ PVR in PMU mapfile (Shriya)

   - Add Skylake server uncore JSON vendor events (Andi Kleen)

   - Support exporting Intel PT data to sqlite3 with python perf
     scripts, this is in addition to the postgresql support that was
     already there (Adrian Hunter)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (253 commits)
  perf symbols: Fix plt entry calculation for ARM and AARCH64
  perf probe: Fix kprobe blacklist checking condition
  perf/x86: Fix caps/ for !Intel
  perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR
  perf/core, pt, bts: Get rid of itrace_started
  perf trace beauty: Beautify pkey_{alloc,free,mprotect} arguments
  tools headers: Sync cpu features kernel ABI headers with tooling headers
  perf tools: Pass full path of FEATURES_DUMP
  perf tools: Robustify detection of clang binary
  tools lib: Allow external definition of CC, AR and LD
  perf tools: Allow external definition of flex and bison binary names
  tools build tests: Don't hardcode gcc name
  perf report: Group stat values on global event id
  perf values: Zero value buffers
  perf values: Fix allocation check
  perf values: Fix thread index bug
  perf report: Add dump_read function
  perf record: Set read_format for inherit_stat
  perf c2c: Fix remote HITM detection for Skylake
  perf tools: Fix static build with newer toolchains
  ...

Pull RCU updates from Ingo Molnad:
 "The main RCU related changes in this cycle were:

   - Removal of spin_unlock_wait()
   - SRCU updates
   - RCU torture-test updates
   - RCU Documentation updates
   - Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant
   - Miscellaneous RCU fixes
   - CPU-hotplug fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
  arch: Remove spin_unlock_wait() arch-specific definitions
  locking: Remove spin_unlock_wait() generic definitions
  drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
  ipc: Replace spin_unlock_wait() with lock/unlock pair
  exit: Replace spin_unlock_wait() with lock/unlock pair
  completion: Replace spin_unlock_wait() with lock/unlock pair
  doc: Set down RCU's scheduling-clock-interrupt needs
  doc: No longer allowed to use rcu_dereference on non-pointers
  doc: Add RCU files to docbook-generation files
  doc: Update memory-barriers.txt for read-to-write dependencies
  doc: Update RCU documentation
  membarrier: Provide expedited private command
  rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter()
  rcu: Add warning to rcu_idle_enter() for irqs enabled
  rcu: Make rcu_idle_enter() rely on callers disabling irqs
  rcu: Add assertions verifying blocked-tasks list
  rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit()
  rcu: Add TPS() protection for _rcu_barrier_trace strings
  rcu: Use idle versions of swait to make idle-hack clear
  swait: Add idle variants which don't contribute to load average
  ...

Pull debugobjects fix from Ingo Molnar:
 "A single commit making debugobjects interact better with kmemleak"

* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Make kmemleak ignore debug objects

 Conflicts:
	mm/page_alloc.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull documentation updates from Jonathan Corbet:
 "After a fair amount of churn in the last couple of cycles, docs are
  taking it easier this time around. Lots of fixes and some new
  documentation, but nothing all that radical. Perhaps the most
  interesting change for many is the scripts/sphinx-pre-install tool
  from Mauro; it will tell you exactly which packages you need to
  install to get a working docs toolchain on your system.

  There are two little patches reaching outside of Documentation/; both
  just tweak kerneldoc comments to eliminate warnings and fix some
  dangling doc pointers"

* 'docs-next' of git://git.lwn.net/linux: (52 commits)
  Documentation/sphinx: fix kernel-doc decode for non-utf-8 locale
  genalloc: Fix an incorrect kerneldoc comment
  doc: Add documentation for the genalloc subsystem
  assoc_array: fix path to assoc_array documentation
  kernel-doc parser mishandles declarations split into lines
  docs: ReSTify table of contents in core.rst
  docs: process: drop git snapshots from applying-patches.rst
  Documentation:input: fix typo
  swap: Remove obsolete sentence
  sphinx.rst: Allow Sphinx version 1.6 at the docs
  docs-rst: fix verbatim font size on tables
  Documentation: stable-kernel-rules: fix broken git urls
  rtmutex: update rt-mutex
  rtmutex: update rt-mutex-design
  docs: fix minimal sphinx version in conf.py
  docs: fix nested numbering in the TOC
  NVMEM documentation fix: A minor typo
  docs-rst: pdf: use same vertical margin on all Sphinx versions
  doc: Makefile: if sphinx is not found, run a check script
  docs: Fix paths in security/keys
  ...

Merge tag 'hwmon-for-linus-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - new drivers:
   - Lantiq CPU temperature sensor
   - IBM CFF power supply
   - TPS53679 PMBus driver

 - new support:
   - LM5066I (lm25066 PMBus driver)
   - Intel VID protocol VR13 (PMBus drivers)
   - CAT34TS02C, GT30TS00, GT34TS02, and CAT34TS04 (jc42 driver)

 - cleanup and minor improvements in several drivers

* tag 'hwmon-for-linus-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (36 commits)
  hwmon: (ltq-cputemp) add cpu temp sensor driver
  hwmon: (ltq-cputemp) add devicetree bindings documentation
  hwmon: (pmbus) Add support for Texas Instruments tps53679 device
  hwmon: (asc7621) make several arrays static const
  hwmon: (pmbus/lm25066) Add support for TI LM5066I
  hwmon: (pmbus/lm25066) Offset coefficient depends on CL
  hwmon: (pmbus) Add support for Intel VID protocol VR13
  Documentation: hwmon: Document the IBM CFF power supply
  hwmon: (pmbus) Add IBM Common Form Factor (CFF) power supply driver
  dt-bindings: hwmon: Document the IBM CCF power supply version 1
  hwmon: (ftsteutates) constify i2c_device_id
  hwmon: da9052: Add support for TSI channel
  mfd: da9052: Make touchscreen registration optional
  hwmon: da9052: Replace S_IRUGO with 0444
  mfd: da9052: Add register details for TSI
  hwmon: (aspeed-pwm) add THERMAL dependency
  hwmon: (pmbus) Add debugfs for status registers
  hwmon: (aspeed-pwm-tacho) cooling device support.
  Documentation: dt-bindings: aspeed-pwm-tacho cooling device.
  hwmon: (pmbus): Add generic alarm bit for iin and pin
  ...

Pull rdma updates from Doug Ledford:
 "This is a big pull request.

  Of note is that I'm sending you the new ioctl API for the rdma
  subsystem. We put it up on linux-api@, but didn't get much response.
  The API is complex, but it solves two different problems in one go:

   1) The bi-directional nature of the RDMA file write calls, which
      created the security hole we had to handle (and for which the fix
      is now causing problems for systems in production, we were a bit
      over zealous in the fix and the ability to open a device, then
      fork, then create new queue pairs on the device and use them is
      broken).

   2) The bloat caused by different vendors implementing extensions to
      the base verbs API. Each vendor's hardware is slightly different,
      and the hardware might be suitable for one extension but not
      another.

      By the time we add generic extensions for all the different ways
      that the different hardware can offload things, the API becomes
      bloated. Things like our completion structs have started to exceed
      a cache line in size because of all the elements needed to support
      this. That in turn shows up heavily in the performance graphs with
      a noticable drop in performance on 100Gigabit links as our
      completion structs go from occupying one cache line to 1+.

      This API makes things like the completion structs modular in a
      very similar way to netlink so that your structs can only include
      the items needed for the offloads/features you are actually using
      on a given queue pair. In that way we support everything, but only
      use what we need, and our structs stay smaller.

  The ioctl API is better explained by the posting on linux-api@ than I
  can explain it here, so I'll just leave it at that.

  The rest of the pull request is typical stuff.

  Updates for 4.14 kernel merge window

   - Lots of hfi1 driver updates (mixed with a few qib and core updates
     as well)

   - rxe updates

   - various mlx updates

   - Set default roce type to RoCEv2

   - Several larger fixes for bnxt_re that were too big for -rc

   - Several larger fixes for qedr that, likewise, were too big for -rc

   - Misc core changes

   - Make the hns_roce driver compilable on arches other than aarch64 so
     we can more easily debug build issues related to it

   - Add rdma-netlink infrastructure updates

   - Add automatic IRQ affinity infrastructure

   - Add 32bit lid support

   - Lots of misc fixes across the subsystem from random people

   - Autoloading of RDMA netlink modules

   - PCI pool cleanups from Romain Perier

   - mlx5 driver feature additions and fixes

   - Hardware tag matchine feature

   - Fix sleeping in atomic when resolving roce ah

   - Add experimental ioctl interface as posted to linux-api@"

* tag 'for-linus-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (328 commits)
  IB/core: Expose ioctl interface through experimental Kconfig
  IB/core: Assign root to all drivers
  IB/core: Add completion queue (cq) object actions
  IB/core: Add legacy driver's user-data
  IB/core: Export ioctl enum types to user-space
  IB/core: Explicitly destroy an object while keeping uobject
  IB/core: Add macros for declaring methods and attributes
  IB/core: Add uverbs merge trees functionality
  IB/core: Add DEVICE object and root tree structure
  IB/core: Declare an object instead of declaring only type attributes
  IB/core: Add new ioctl interface
  RDMA/vmw_pvrdma: Fix a signedness
  RDMA/vmw_pvrdma: Report network header type in WC
  IB/core: Add might_sleep() annotation to ib_init_ah_from_wc()
  IB/cm: Fix sleeping in atomic when RoCE is used
  IB/core: Add support to finalize objects in one transaction
  IB/core: Add a generic way to execute an operation on a uobject
  Documentation: Hardware tag matching
  IB/mlx5: Support IB_SRQT_TM
  net/mlx5: Add XRQ support
  ...

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.14 merge window.

  I'm sending this early, as my continuing journey into fatherhood is
  occurring really soon now, I'm going to be mostly useless for the next
  couple of weeks, though I may be able to read email, I doubt I'll be
  doing much patch applications or git sending. If anything urgent pops
  up I've asked Daniel/Jani/Alex/Sean to try and direct stuff towards
  you.

  Outside drm changes:

  Some rcar-du updates that touch the V4L tree, all acks should be in
  place. It adds one export to the radix tree code for new i915 use
  case. There are some minor AGP cleanups (don't see that too often).
  Changes to the vbox driver in staging to avoid breaking compilation.

  Summary:

  core:
   - Atomic helper fixes
   - Atomic UAPI fixes
   - Add YCBCR 4:2:0 support
   - Drop set_busid hook
   - Refactor fb_helper locking
   - Remove a bunch of internal APIs
   - Add a bunch of better default handlers
   - Format modifier/blob plane property added
   - More internal header refactoring
   - Make more internal API names consistent
   - Enhanced syncobj APIs (wait/signal/reset/create signalled)

  bridge:
   - Add Synopsys Designware MIPI DSI host bridge driver

  tiny:
   - Add Pervasive Displays RePaper displays
   - Add support for LEGO MINDSTORMS EV3 LCD

  i915:
   - Lots of GEN10/CNL  support patches
   - drm syncobj support
   - Skylake+ watermark refactoring
   - GVT vGPU 48-bit ppgtt support
   - GVT performance improvements
   - NOA change ioctl
   - CCS (color compression) scanout support
   - GPU reset improvements

  amdgpu:
   - Initial hugepage support
   - BO migration logic rework
   - Vega10 improvements
   - Powerplay fixes
   - Stop reprogramming the MC
   - Fixes for ACP audio on stoney
   - SR-IOV fixes/improvements
   - Command submission overhead improvements

  amdkfd:
   - Non-dGPU upstreaming patches
   - Scratch VA ioctl
   - Image tiling modes
   - Update PM4 headers for new firmware
   - Drop all BUG_ONs.

  nouveau:
   - GP108 modesetting support.
   - Disable MSI on big endian.

  vmwgfx:
   - Add fence fd support.

  msm:
   - Runtime PM improvements

  exynos:
   - NV12MT support
   - Refactor KMS drivers

  imx-drm:
   - Lock scanout channel to improve memory bw
   - Cleanups

  etnaviv:
   - GEM object population fixes

  tegra:
   - Prep work for Tegra186 support
   - PRIME mmap support

  sunxi:
   - HDMI support improvements
   - HDMI CEC support

  omapdrm:
   - HDMI hotplug IRQ support
   - Big driver cleanup
   - OMAP5 DSI support

  rcar-du:
   - vblank fixes
   - VSP1 updates

  arcgpu:
   - Minor fixes

  stm:
   - Add STM32 DSI controller driver

  dw_hdmi:
   - Add support for Rockchip RK3399
   - HDMI CEC support

  atmel-hlcdc:
   - Add 8-bit color support

  vc4:
   - Atomic fixes
   - New ioctl to attach a label to a buffer object
   - HDMI CEC support
   - Allow userspace to dictate rendering order on submit ioctl"

* tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux: (1074 commits)
  drm/syncobj: Add a signal ioctl (v3)
  drm/syncobj: Add a reset ioctl (v3)
  drm/syncobj: Add a syncobj_array_find helper
  drm/syncobj: Allow wait for submit and signal behavior (v5)
  drm/syncobj: Add a CREATE_SIGNALED flag
  drm/syncobj: Add a callback mechanism for replace_fence (v3)
  drm/syncobj: add sync obj wait interface. (v8)
  i915: Use drm_syncobj_fence_get
  drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2)
  drm/syncobj: Rename fence_get to find_fence
  drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate
  drm/vmwgfx: Bump the version for fence FD support
  drm/vmwgfx: Add export fence to file descriptor support
  drm/vmwgfx: Add support for imported Fence File Descriptor
  drm/vmwgfx: Prepare to support fence fd
  drm/vmwgfx: Fix incorrect command header offset at restart
  drm/vmwgfx: Support the NOP_ERROR command
  drm/vmwgfx: Restart command buffers after errors
  drm/vmwgfx: Move irq bottom half processing to threads
  drm/vmwgfx: Don't use drm_irq_[un]install
  ...