Expose new capability to support changing the number of EQs available
to other functions.

Fixes: 93197c7c ("mlx5/core: Support max_io_eqs for a function")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In some production workloads we noticed that connections could
sometimes close extremely prematurely with ETIMEDOUT after
transmitting only 1 TLP and RTO retransmission (when we would normally
expect roughly tcp_retries2 = TCP_RETR2 = 15 RTOs before a connection
closes with ETIMEDOUT).

From tracing we determined that these workloads can suffer from a
scenario where in fast recovery, after some retransmits, a DSACK undo
can happen at a point where the scoreboard is totally clear (we have
retrans_out == sacked_out == lost_out == 0). In such cases, calling
tcp_try_keep_open() means that we do not execute any code path that
clears tp->retrans_stamp to 0. That means that tp->retrans_stamp can
remain erroneously set to the start time of the undone fast recovery,
even after the fast recovery is undone. If minutes or hours elapse,
and then a TLP/RTO/RTO sequence occurs, then the start_ts value in
retransmits_timed_out() (which is from tp->retrans_stamp) will be
erroneously ancient (left over from the fast recovery undone via
DSACKs). Thus this ancient tp->retrans_stamp value can cause the
connection to die very prematurely with ETIMEDOUT via
tcp_write_err().

The fix: we change DSACK undo in fast recovery (TCP_CA_Recovery) to
call tcp_try_to_open() instead of tcp_try_keep_open(). This ensures
that if no retransmits are in flight at the time of DSACK undo in fast
recovery then we properly zero retrans_stamp. Note that calling
tcp_try_to_open() is more consistent with other loss recovery
behavior, since normal fast recovery (CA_Recovery) and RTO recovery
(CA_Loss) both normally end when tp->snd_una meets or exceeds
tp->high_seq and then in tcp_fastretrans_alert() the "default" switch
case executes tcp_try_to_open(). Also note that by inspection this
change to call tcp_try_to_open() implies at least one other nice bug
fix, where now an ECE-marked DSACK that causes an undo will properly
invoke tcp_enter_cwr() rather than ignoring the ECE mark.

Fixes: c7d9d6a1 ("tcp: undo on DSACK during recovery")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix copy-paste error in the code comment. The code refers to
LED blinking configuration, not brightness configuration. It
was likely copied from comment above this one which does
refer to brightness configuration.

Fixes: 4e901018 ("net: phy: phy_device: Call into the PHY driver to set LED blinking")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240626030638.512069-1-marex@denx.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Johannes Berg says:

====================
Just a few changes:
 - maintainers: Larry Finger sadly passed away
 - maintainers: ath trees are in their group now
 - TXQ FQ quantum configuration fix
 - TI wl driver: work around stuck FW in AP mode
 - mac80211: disable softirqs in some new code
   needing that

* tag 'wireless-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  MAINTAINERS: wifi: update ath.git location
  MAINTAINERS: Remembering Larry Finger
  wifi: mac80211: disable softirqs for queued frame handling
  wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM values
  wifi: wlcore: fix wlcore AP mode
====================

Link: https://patch.msgid.link/20240627083627.15312-3-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, bpf and netfilter.

  There are a bunch of regressions addressed here, but hopefully nothing
  spectacular. We are still waiting the driver fix from Intel, mentioned
  by Jakub in the previous networking pull.

  Current release - regressions:

   - core: add softirq safety to netdev_rename_lock

   - tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed
     TFO

   - batman-adv: fix RCU race at module unload time

  Previous releases - regressions:

   - openvswitch: get related ct labels from its master if it is not
     confirmed

   - eth: bonding: fix incorrect software timestamping report

   - eth: mlxsw: fix memory corruptions on spectrum-4 systems

   - eth: ionic: use dev_consume_skb_any outside of napi

  Previous releases - always broken:

   - netfilter: fully validate NFT_DATA_VALUE on store to data registers

   - unix: several fixes for OoB data

   - tcp: fix race for duplicate reqsk on identical SYN

   - bpf:
       - fix may_goto with negative offset
       - fix the corner case with may_goto and jump to the 1st insn
       - fix overrunning reservations in ringbuf

   - can:
       - j1939: recover socket queue on CAN bus error during BAM
         transmission
       - mcp251xfd: fix infinite loop when xmit fails

   - dsa: microchip: monitor potential faults in half-duplex mode

   - eth: vxlan: pull inner IP header in vxlan_xmit_one()

   - eth: ionic: fix kernel panic due to multi-buffer handling

  Misc:

   - selftest: unix tests refactor and a lot of new cases added"

* tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  net: mana: Fix possible double free in error handling path
  selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c.
  af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.
  selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c
  selftest: af_unix: Check SIGURG after every send() in msg_oob.c
  selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c
  af_unix: Don't stop recv() at consumed ex-OOB skb.
  selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c.
  af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.
  af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.
  selftest: af_unix: Add msg_oob.c.
  selftest: af_unix: Remove test_unix_oob.c.
  tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
  netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
  net: usb: qmi_wwan: add Telit FN912 compositions
  tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
  ionic: use dev_consume_skb_any outside of napi
  net: dsa: microchip: fix wrong register write when masking interrupt
  Fix race for duplicate reqsk on identical SYN
  ibmvnic: Add tx check to prevent skb leak
  ...

Pull sound fixes from Takashi Iwai:
 "This became bigger than usual, as it receives a pile of pending ASoC
  fixes. Most of changes are for device-specific issues while there are
  a few core fixes that are all rather trivial:

   - DMA-engine sync fixes

   - Continued MIDI2 conversion fixes

   - Various ASoC Intel SOF fixes

   - A series of ASoC topology fixes for memory handling

   - AMD ACP fix, curing a recent regression, too

   - Platform / codec-specific fixes for mediatek, atmel, realtek, etc"

* tag 'sound-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (40 commits)
  ASoC: rt5645: fix issue of random interrupt from push-button
  ALSA: seq: Fix missing MSB in MIDI2 SPP conversion
  ASoC: amd: yc: Fix non-functional mic on ASUS M5602RA
  ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook 645/665 G11.
  ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820
  ALSA: dmaengine_pcm: terminate dmaengine before synchronize
  ALSA: hda/relatek: Enable Mute LED on HP Laptop 15-gw0xxx
  ALSA: PCM: Allow resume only for suspended streams
  ALSA: seq: Fix missing channel at encoding RPN/NRPN MIDI2 messages
  ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link
  ASoC: fsl-asoc-card: set priv->pdev before using it
  ASoC: amd: acp: move chip->flag variable assignment
  ASoC: amd: acp: remove i2s configuration check in acp_i2s_probe()
  ASoC: amd: acp: add a null check for chip_pdev structure
  ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64
  ASoC: q6apm-lpass-dai: close graph on prepare errors
  ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up
  ASoC: topology: Fix route memory corruption
  ASoC: rt722-sdca-sdw: add debounce time for type detection
  ASoC: SOF: sof-audio: Skip unprepare for in-use widgets on error rollback
  ...

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains two Netfilter fixes for net:

Patch #1 fixes CONFIG_SYSCTL=n for a patch coming in the previous PR
	 to move the sysctl toggle to enable SRv6 netfilter hooks from
	 nf_conntrack to the core, from Jianguo Wu.

Patch #2 fixes a possible pointer leak to userspace due to insufficient
	 validation of NFT_DATA_VALUE.

Linus found this pointer leak to userspace via zdi-disclosures@ and
forwarded the notice to Netfilter maintainers, he appears as reporter
because whoever found this issue never approached Netfilter
maintainers neither via security@ nor in private.

netfilter pull request 24-06-27

* tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
  netfilter: fix undefined reference to 'netfilter_lwtunnel_*' when CONFIG_SYSCTL=n
====================

Link: https://patch.msgid.link/20240626233845.151197-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function adev_release
calls kfree(madev). We shouldn't call kfree(madev) again
in the error handling path. Set 'madev' to NULL.

Fixes: a69839d4 ("net: mana: Add support for auxiliary device")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240625130314.2661257-1-make24@iscas.ac.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Kuniyuki Iwashima says:

====================
af_unix: Fix bunch of MSG_OOB bugs and add new tests.

This series rewrites the selftest for AF_UNIX MSG_OOB and fixes
bunch of bugs that AF_UNIX behaves differently compared to TCP.

Note that the test discovered few more bugs in TCP side, which
will be fixed in another series.
====================

Link: https://lore.kernel.org/r/20240625013645.45034-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

To catch regression, let's check ioctl(SIOCATMARK) after every
send() and recv() calls.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the
OOB skb is at the head of the receive queue and no new OOB data is queued.

Without fix:

  #  RUN           msg_oob.no_peek.oob ...
  # msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1)
  # oob: Test terminated by assertion
  #          FAIL  msg_oob.no_peek.oob
  not ok 2 msg_oob.no_peek.oob

With fix:

  #  RUN           msg_oob.no_peek.oob ...
  #            OK  msg_oob.no_peek.oob
  ok 2 msg_oob.no_peek.oob

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When OOB data is in recvq, we can detect it with epoll by checking
EPOLLPRI.

This patch add checks for EPOLLPRI after every send() and recv() in
all test cases.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When data is sent with MSG_OOB, SIGURG is sent to a process if the
receiver socket has set its owner to the process by ioctl(FIOSETOWN)
or fcntl(F_SETOWN).

This patch adds SIGURG check after every send(MSG_OOB) call.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When SO_OOBINLINE is enabled on a socket, MSG_OOB can be recv()ed
without MSG_OOB flag, and ioctl(SIOCATMARK) will behaves differently.

This patch adds some test cases for SO_OOBINLINE.

Note the new test cases found two bugs in TCP.

  1) After reading OOB data with non-inline mode, we can re-read
     the data by setting SO_OOBINLINE.

  #  RUN           msg_oob.no_peek.inline_oob_ahead_break ...
  # msg_oob.c:146:inline_oob_ahead_break:AF_UNIX :world
  # msg_oob.c:147:inline_oob_ahead_break:TCP     :oworld
  #            OK  msg_oob.no_peek.inline_oob_ahead_break
  ok 14 msg_oob.no_peek.inline_oob_ahead_break

  2) The head OOB data is dropped if SO_OOBINLINE is disabled
     if a new OOB data is queued.

  #  RUN           msg_oob.no_peek.inline_ex_oob_drop ...
  # msg_oob.c:171:inline_ex_oob_drop:AF_UNIX :x
  # msg_oob.c:172:inline_ex_oob_drop:TCP     :y
  # msg_oob.c:146:inline_ex_oob_drop:AF_UNIX :y
  # msg_oob.c:147:inline_ex_oob_drop:TCP     :Resource temporarily unavailable
  #            OK  msg_oob.no_peek.inline_ex_oob_drop
  ok 17 msg_oob.no_peek.inline_ex_oob_drop
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, recv() is stopped at a consumed OOB skb even if a new
OOB skb is queued and we can ignore the old OOB skb.

  >>> from socket import *
  >>> c1, c2 = socket(AF_UNIX, SOCK_STREAM)
  >>> c1.send(b'hellowor', MSG_OOB)
  8
  >>> c2.recv(1, MSG_OOB)  # consume OOB data stays at middle of recvq.
  b'r'
  >>> c1.send(b'ld', MSG_OOB)
  2
  >>> c2.recv(10)          # recv() stops at the old consumed OOB
  b'hellowo'               # should be 'hellowol'

manage_oob() should not stop recv() at the old consumed OOB skb if
there is a new OOB data queued.

Note that TCP behaviour is apparently wrong in this test case because
we can recv() the same OOB data twice.

Without fix:

  #  RUN           msg_oob.no_peek.ex_oob_ahead_break ...
  # msg_oob.c:138:ex_oob_ahead_break:AF_UNIX :hellowo
  # msg_oob.c:139:ex_oob_ahead_break:Expected:hellowol
  # msg_oob.c:141:ex_oob_ahead_break:Expected ret[0] (7) == expected_len (8)
  # ex_oob_ahead_break: Test terminated by assertion
  #          FAIL  msg_oob.no_peek.ex_oob_ahead_break
  not ok 11 msg_oob.no_peek.ex_oob_ahead_break

With fix:

  #  RUN           msg_oob.no_peek.ex_oob_ahead_break ...
  # msg_oob.c:146:ex_oob_ahead_break:AF_UNIX :hellowol
  # msg_oob.c:147:ex_oob_ahead_break:TCP     :helloworl
  #            OK  msg_oob.no_peek.ex_oob_ahead_break
  ok 11 msg_oob.no_peek.ex_oob_ahead_break

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

While testing, I found some weird behaviour on the TCP side as well.

For example, TCP drops the preceding OOB data when queueing a new
OOB data if the old OOB data is at the head of recvq.

  #  RUN           msg_oob.no_peek.ex_oob_drop ...
  # msg_oob.c:146:ex_oob_drop:AF_UNIX :x
  # msg_oob.c:147:ex_oob_drop:TCP     :Resource temporarily unavailable
  # msg_oob.c:146:ex_oob_drop:AF_UNIX :y
  # msg_oob.c:147:ex_oob_drop:TCP     :Invalid argument
  #            OK  msg_oob.no_peek.ex_oob_drop
  ok 9 msg_oob.no_peek.ex_oob_drop

  #  RUN           msg_oob.no_peek.ex_oob_drop_2 ...
  # msg_oob.c:146:ex_oob_drop_2:AF_UNIX :x
  # msg_oob.c:147:ex_oob_drop_2:TCP     :Resource temporarily unavailable
  #            OK  msg_oob.no_peek.ex_oob_drop_2
  ok 10 msg_oob.no_peek.ex_oob_drop_2

This patch allows AF_UNIX's MSG_OOB implementation to produce different
results from TCP when operations are guarded with tcp_incompliant{}.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Let's say a socket send()s "hello" with MSG_OOB and "world" without flags,

  >>> from socket import *
  >>> c1, c2 = socketpair(AF_UNIX)
  >>> c1.send(b'hello', MSG_OOB)
  5
  >>> c1.send(b'world')
  5

and its peer recv()s "hell" and "o".

  >>> c2.recv(10)
  b'hell'
  >>> c2.recv(1, MSG_OOB)
  b'o'

Now the consumed OOB skb stays at the head of recvq to return a correct
value for ioctl(SIOCATMARK), which is broken now and fixed by a later
patch.

Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL,
so recv() ends up with -EAGAIN.

  >>> c2.setblocking(False)  # This causes -EAGAIN even with available data
  >>> c2.recv(5)
  Traceback (most recent call last):
    File "<stdin>", line 1, in <module>
  BlockingIOError: [Errno 11] Resource temporarily unavailable

However, next recv() will return the following available data, "world".

  >>> c2.recv(5)
  b'world'

When the consumed OOB skb is at the head of the queue, we need to fetch
the next skb to fix the weird behaviour.

Note that the issue does not happen without MSG_DONTWAIT because we can
retry after manage_oob().

This patch also adds a test case that covers the issue.

Without fix:

  #  RUN           msg_oob.no_peek.ex_oob_break ...
  # msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable
  # msg_oob.c:135:ex_oob_break:Expected:ld
  # msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2)
  # ex_oob_break: Test terminated by assertion
  #          FAIL  msg_oob.no_peek.ex_oob_break
  not ok 8 msg_oob.no_peek.ex_oob_break

With fix:

  #  RUN           msg_oob.no_peek.ex_oob_break ...
  #            OK  msg_oob.no_peek.ex_oob_break
  ok 8 msg_oob.no_peek.ex_oob_break

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

After consuming OOB data, recv() reading the preceding data must break at
the OOB skb regardless of MSG_PEEK.

Currently, MSG_PEEK does not stop recv() for AF_UNIX, and the behaviour is
not compliant with TCP.

  >>> from socket import *
  >>> c1, c2 = socketpair(AF_UNIX)
  >>> c1.send(b'hello', MSG_OOB)
  5
  >>> c1.send(b'world')
  5
  >>> c2.recv(1, MSG_OOB)
  b'o'
  >>> c2.recv(9, MSG_PEEK)  # This should return b'hell'
  b'hellworld'              # even with enough buffer.

Let's fix it by returning NULL for consumed skb and unlinking it only if
MSG_PEEK is not specified.

This patch also adds test cases that add recv(MSG_PEEK) before each recv().

Without fix:

  #  RUN           msg_oob.peek.oob_ahead_break ...
  # msg_oob.c:134:oob_ahead_break:AF_UNIX :hellworld
  # msg_oob.c:135:oob_ahead_break:Expected:hell
  # msg_oob.c:137:oob_ahead_break:Expected ret[0] (9) == expected_len (4)
  # oob_ahead_break: Test terminated by assertion
  #          FAIL  msg_oob.peek.oob_ahead_break
  not ok 13 msg_oob.peek.oob_ahead_break

With fix:

  #  RUN           msg_oob.peek.oob_ahead_break ...
  #            OK  msg_oob.peek.oob_ahead_break
  ok 13 msg_oob.peek.oob_ahead_break

Fixes: 314001f0 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

AF_UNIX's MSG_OOB functionality lacked thorough testing, and we found
some bizarre behaviour.

The new selftest validates every MSG_OOB operation against TCP as a
reference implementation.

This patch adds only a few tests with basic send() and recv() that
do not fail.

The following patches will add more test cases for SO_OOBINLINE, SIGURG,
EPOLLPRI, and SIOCATMARK.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

test_unix_oob.c does not fully cover AF_UNIX's MSG_OOB functionality,
thus there are discrepancies between TCP behaviour.

Also, the test uses fork() to create message producer, and it's not
easy to understand and add more test cases.

Let's remove test_unix_oob.c and rewrite a new test.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In the TRACE_EVENT(qdisc_reset) NULL dereference occurred from

 qdisc->dev_queue->dev <NULL> ->name

This situation simulated from bunch of veths and Bluetooth disconnection
and reconnection.

During qdisc initialization, qdisc was being set to noop_queue.
In veth_init_queue, the initial tx_num was reduced back to one,
causing the qdisc reset to be called with noop, which led to the kernel
panic.

I've attached the GitHub gist link that C converted syz-execprogram
source code and 3 log of reproduced vmcore-dmesg.

 https://gist.github.com/yskelg/cc64562873ce249cdd0d5a358b77d740

Yeoreum and I use two fuzzing tool simultaneously.

One process with syz-executor : https://github.com/google/syzkaller

 $ ./syz-execprog -executor=./syz-executor -repeat=1 -sandbox=setuid \
    -enable=none -collide=false log1

The other process with perf fuzzer:
 https://github.com/deater/perf_event_tests/tree/master/fuzzer

 $ perf_event_tests/fuzzer/perf_fuzzer

I think this will happen on the kernel version.

 Linux kernel version +v6.7.10, +v6.8, +v6.9 and it could happen in v6.10.

This occurred from 51270d57. I think this patch is absolutely
necessary. Previously, It was showing not intended string value of name.

I've reproduced 3 time from my fedora 40 Debug Kernel with any other module
or patched.

 version: 6.10.0-0.rc2.20240608gitdc772f82.29.fc41.aarch64+debug

[ 5287.164555] veth0_vlan: left promiscuous mode
[ 5287.164929] veth1_macvtap: left promiscuous mode
[ 5287.164950] veth0_macvtap: left promiscuous mode
[ 5287.164983] veth1_vlan: left promiscuous mode
[ 5287.165008] veth0_vlan: left promiscuous mode
[ 5287.165450] veth1_macvtap: left promiscuous mode
[ 5287.165472] veth0_macvtap: left promiscuous mode
[ 5287.165502] veth1_vlan: left promiscuous mode
…
[ 5297.598240] bridge0: port 2(bridge_slave_1) entered blocking state
[ 5297.598262] bridge0: port 2(bridge_slave_1) entered forwarding state
[ 5297.598296] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5297.598313] bridge0: port 1(bridge_slave_0) entered forwarding state
[ 5297.616090] 8021q: adding VLAN 0 to HW filter on device bond0
[ 5297.620405] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5297.620730] bridge0: port 2(bridge_slave_1) entered disabled state
[ 5297.627247] 8021q: adding VLAN 0 to HW filter on device team0
[ 5297.629636] bridge0: port 1(bridge_slave_0) entered blocking state
…
[ 5298.002798] bridge_slave_0: left promiscuous mode
[ 5298.002869] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5298.309444] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[ 5298.315206] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[ 5298.320207] bond0 (unregistering): Released all slaves
[ 5298.354296] hsr_slave_0: left promiscuous mode
[ 5298.360750] hsr_slave_1: left promiscuous mode
[ 5298.374889] veth1_macvtap: left promiscuous mode
[ 5298.374931] veth0_macvtap: left promiscuous mode
[ 5298.374988] veth1_vlan: left promiscuous mode
[ 5298.375024] veth0_vlan: left promiscuous mode
[ 5299.109741] team0 (unregistering): Port device team_slave_1 removed
[ 5299.185870] team0 (unregistering): Port device team_slave_0 removed
…
[ 5300.155443] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1
[ 5300.155724] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9
[ 5300.155988] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9
….
[ 5301.075531] team0: Port device team_slave_1 added
[ 5301.085515] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5301.085531] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5301.085588] bridge_slave_0: entered allmulticast mode
[ 5301.085800] bridge_slave_0: entered promiscuous mode
[ 5301.095617] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5301.095633] bridge0: port 1(bridge_slave_0) entered disabled state
…
[ 5301.149734] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.173234] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.180517] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[ 5301.193481] hsr_slave_0: entered promiscuous mode
[ 5301.204425] hsr_slave_1: entered promiscuous mode
[ 5301.210172] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.210185] Cannot create hsr debugfs directory
[ 5301.224061] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[ 5301.246901] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.255934] team0: Port device team_slave_0 added
[ 5301.256480] team0: Port device team_slave_1 added
[ 5301.256948] team0: Port device team_slave_0 added
…
[ 5301.435928] hsr_slave_0: entered promiscuous mode
[ 5301.446029] hsr_slave_1: entered promiscuous mode
[ 5301.455872] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.455884] Cannot create hsr debugfs directory
[ 5301.502664] hsr_slave_0: entered promiscuous mode
[ 5301.513675] hsr_slave_1: entered promiscuous mode
[ 5301.526155] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.526164] Cannot create hsr debugfs directory
[ 5301.563662] hsr_slave_0: entered promiscuous mode
[ 5301.576129] hsr_slave_1: entered promiscuous mode
[ 5301.580259] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.580270] Cannot create hsr debugfs directory
[ 5301.590269] 8021q: adding VLAN 0 to HW filter on device bond0

[ 5301.595872] KASAN: null-ptr-deref in range [0x0000000000000130-0x0000000000000137]
[ 5301.595877] Mem abort info:
[ 5301.595881]   ESR = 0x0000000096000006
[ 5301.595885]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 5301.595889]   SET = 0, FnV = 0
[ 5301.595893]   EA = 0, S1PTW = 0
[ 5301.595896]   FSC = 0x06: level 2 translation fault
[ 5301.595900] Data abort info:
[ 5301.595903]   ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 5301.595907]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 5301.595911]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 5301.595915] [dfff800000000026] address between user and kernel address ranges
[ 5301.595971] Internal error: Oops: 0000000096000006 [#1] SMP
…
[ 5301.596076] CPU: 2 PID: 102769 Comm:
syz-executor.3 Kdump: loaded Tainted:
 G        W         -------  ---  6.10.0-0.rc2.20240608gitdc772f82.29.fc41.aarch64+debug #1
[ 5301.596080] Hardware name: VMware, Inc. VMware20,1/VBSA,
 BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023
[ 5301.596082] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 5301.596085] pc : strnlen+0x40/0x88
[ 5301.596114] lr : trace_event_get_offsets_qdisc_reset+0x6c/0x2b0
[ 5301.596124] sp : ffff8000beef6b40
[ 5301.596126] x29: ffff8000beef6b40 x28: dfff800000000000 x27: 0000000000000001
[ 5301.596131] x26: 6de1800082c62bd0 x25: 1ffff000110aa9e0 x24: ffff800088554f00
[ 5301.596136] x23: ffff800088554ec0 x22: 0000000000000130 x21: 0000000000000140
[ 5301.596140] x20: dfff800000000000 x19: ffff8000beef6c60 x18: ffff7000115106d8
[ 5301.596143] x17: ffff800121bad000 x16: ffff800080020000 x15: 0000000000000006
[ 5301.596147] x14: 0000000000000002 x13: ffff0001f3ed8d14 x12: ffff700017ddeda5
[ 5301.596151] x11: 1ffff00017ddeda4 x10: ffff700017ddeda4 x9 : ffff800082cc5eec
[ 5301.596155] x8 : 0000000000000004 x7 : 00000000f1f1f1f1 x6 : 00000000f2f2f200
[ 5301.596158] x5 : 00000000f3f3f3f3 x4 : ffff700017dded80 x3 : 00000000f204f1f1
[ 5301.596162] x2 : 0000000000000026 x1 : 0000000000000000 x0 : 0000000000000130
[ 5301.596166] Call trace:
[ 5301.596175]  strnlen+0x40/0x88
[ 5301.596179]  trace_event_get_offsets_qdisc_reset+0x6c/0x2b0
[ 5301.596182]  perf_trace_qdisc_reset+0xb0/0x538
[ 5301.596184]  __traceiter_qdisc_reset+0x68/0xc0
[ 5301.596188]  qdisc_reset+0x43c/0x5e8
[ 5301.596190]  netif_set_real_num_tx_queues+0x288/0x770
[ 5301.596194]  veth_init_queues+0xfc/0x130 [veth]
[ 5301.596198]  veth_newlink+0x45c/0x850 [veth]
[ 5301.596202]  rtnl_newlink_create+0x2c8/0x798
[ 5301.596205]  __rtnl_newlink+0x92c/0xb60
[ 5301.596208]  rtnl_newlink+0xd8/0x130
[ 5301.596211]  rtnetlink_rcv_msg+0x2e0/0x890
[ 5301.596214]  netlink_rcv_skb+0x1c4/0x380
[ 5301.596225]  rtnetlink_rcv+0x20/0x38
[ 5301.596227]  netlink_unicast+0x3c8/0x640
[ 5301.596231]  netlink_sendmsg+0x658/0xa60
[ 5301.596234]  __sock_sendmsg+0xd0/0x180
[ 5301.596243]  __sys_sendto+0x1c0/0x280
[ 5301.596246]  __arm64_sys_sendto+0xc8/0x150
[ 5301.596249]  invoke_syscall+0xdc/0x268
[ 5301.596256]  el0_svc_common.constprop.0+0x16c/0x240
[ 5301.596259]  do_el0_svc+0x48/0x68
[ 5301.596261]  el0_svc+0x50/0x188
[ 5301.596265]  el0t_64_sync_handler+0x120/0x130
[ 5301.596268]  el0t_64_sync+0x194/0x198
[ 5301.596272] Code: eb15001f 54000120 d343fc02 12000801 (38f46842)
[ 5301.596285] SMP: stopping secondary CPUs
[ 5301.597053] Starting crashdump kernel...
[ 5301.597057] Bye!

After applying our patch, I didn't find any kernel panic errors.

We've found a simple reproducer

 # echo 1 > /sys/kernel/debug/tracing/events/qdisc/qdisc_reset/enable

 # ip link add veth0 type veth peer name veth1

 Error: Unknown device type.

However, without our patch applied, I tested upstream 6.10.0-rc3 kernel
using the qdisc_reset event and the ip command on my qemu virtual machine.

This 2 commands makes always kernel panic.

Linux version: 6.10.0-rc3

[    0.000000] Linux version 6.10.0-rc3-00164-g44ef20ba-dirty
(paran@fedora) (gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4), GNU ld
version 2.41-34.fc40) #20 SMP PREEMPT Sat Jun 15 16:51:25 KST 2024

Kernel panic message:

[  615.236484] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[  615.237250] Dumping ftrace buffer:
[  615.237679]    (ftrace buffer empty)
[  615.238097] Modules linked in: veth crct10dif_ce virtio_gpu
virtio_dma_buf drm_shmem_helper drm_kms_helper zynqmp_fpga xilinx_can
xilinx_spi xilinx_selectmap xilinx_core xilinx_pr_decoupler versal_fpga
uvcvideo uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videodev
videobuf2_common mc usbnet deflate zstd ubifs ubi rcar_canfd rcar_can
omap_mailbox ntb_msi_test ntb_hw_epf lattice_sysconfig_spi
lattice_sysconfig ice40_spi gpio_xilinx dwmac_altr_socfpga mdio_regmap
stmmac_platform stmmac pcs_xpcs dfl_fme_region dfl_fme_mgr dfl_fme_br
dfl_afu dfl fpga_region fpga_bridge can can_dev br_netfilter bridge stp
llc atl1c ath11k_pci mhi ath11k_ahb ath11k qmi_helpers ath10k_sdio
ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 drm fuse backlight ipv6
Jun 22 02:36:5[3   6k152.62-4sm98k4-0k]v  kCePUr:n e1l :P IUDn:a b4le6
8t oC ohmma: nidpl eN oketr nteali nptaedg i6n.g1 0re.0q-urecs3t- 0at0
1v6i4r-tgu4a4le fa2d0dbraeeds0se-dir tyd f#f2f08
  615.252376] Hardware name: linux,dummy-virt (DT)
[  615.253220] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[  615.254433] pc : strnlen+0x6c/0xe0
[  615.255096] lr : trace_event_get_offsets_qdisc_reset+0x94/0x3d0
[  615.256088] sp : ffff800080b269a0
[  615.256615] x29: ffff800080b269a0 x28: ffffc070f3f98500 x27:
0000000000000001
[  615.257831] x26: 0000000000000010 x25: ffffc070f3f98540 x24:
ffffc070f619cf60
[  615.259020] x23: 0000000000000128 x22: 0000000000000138 x21:
dfff800000000000
[  615.260241] x20: ffffc070f631ad00 x19: 0000000000000128 x18:
ffffc070f448b800
[  615.261454] x17: 0000000000000000 x16: 0000000000000001 x15:
ffffc070f4ba2a90
[  615.262635] x14: ffff700010164d73 x13: 1ffff80e1e8d5eb3 x12:
1ffff00010164d72
[  615.263877] x11: ffff700010164d72 x10: dfff800000000000 x9 :
ffffc070e85d6184
[  615.265047] x8 : ffffc070e4402070 x7 : 000000000000f1f1 x6 :
000000001504a6d3
[  615.266336] x5 : ffff28ca21122140 x4 : ffffc070f5043ea8 x3 :
0000000000000000
[  615.267528] x2 : 0000000000000025 x1 : 0000000000000000 x0 :
0000000000000000
[  615.268747] Call trace:
[  615.269180]  strnlen+0x6c/0xe0
[  615.269767]  trace_event_get_offsets_qdisc_reset+0x94/0x3d0
[  615.270716]  trace_event_raw_event_qdisc_reset+0xe8/0x4e8
[  615.271667]  __traceiter_qdisc_reset+0xa0/0x140
[  615.272499]  qdisc_reset+0x554/0x848
[  615.273134]  netif_set_real_num_tx_queues+0x360/0x9a8
[  615.274050]  veth_init_queues+0x110/0x220 [veth]
[  615.275110]  veth_newlink+0x538/0xa50 [veth]
[  615.276172]  __rtnl_newlink+0x11e4/0x1bc8
[  615.276944]  rtnl_newlink+0xac/0x120
[  615.277657]  rtnetlink_rcv_msg+0x4e4/0x1370
[  615.278409]  netlink_rcv_skb+0x25c/0x4f0
[  615.279122]  rtnetlink_rcv+0x48/0x70
[  615.279769]  netlink_unicast+0x5a8/0x7b8
[  615.280462]  netlink_sendmsg+0xa70/0x1190

Yeoreum and I don't know if the patch we wrote will fix the underlying
cause, but we think that priority is to prevent kernel panic happening.
So, we're sending this patch.

Fixes: 51270d57 ("tracing/net_sched: Fix tracepoints that save qdisc_dev() as a string")
Link: https://lore.kernel.org/lkml/20240229143432.273b4871@gandalf.local.home/t/
Cc: netdev@vger.kernel.org
Tested-by: Yunseong Kim <yskelg@gmail.com>
Signed-off-by: Yunseong Kim <yskelg@gmail.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20240624173320.24945-4-yskelg@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'mm-hotfixes-stable-2024-06-26-17-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "13 hotfixes, 7 are cc:stable.

  All are MM related apart from a MAINTAINERS update. There is no
  identifiable theme here - just singleton patches in various places"

* tag 'mm-hotfixes-stable-2024-06-26-17-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/memory: don't require head page for do_set_pmd()
  mm/page_alloc: Separate THP PCP into movable and non-movable categories
  nfs: drop the incorrect assertion in nfs_swap_rw()
  mm/migrate: make migrate_pages_batch() stats consistent
  MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
  selftests/mm:fix test_prctl_fork_exec return failure
  mm: convert page type macros to enum
  ocfs2: fix DIO failure due to insufficient transaction credits
  kasan: fix bad call to unpoison_slab_object
  mm: handle profiling for fake memory allocations during compaction
  mm/slab: fix 'variable obj_exts set but not used' warning
  /proc/pid/smaps: add mseal info for vma
  mm: fix incorrect vbq reference in purge_fragmented_block

register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers.

Fixes: 96518518 ("netfilter: add nftables")
Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pull workqueue fixes from Tejun Heo:
 "Two patches to fix kworker name formatting"

* tag 'wq-for-6.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Increase worker desc's length to 32
  workqueue: Refactor worker ID formatting and make wq_worker_comm() use full ID string

Merge tag 'asoc-fix-v6.10-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.10

A relatively large batch of updates, largely due to the long interval
since I last sent fixes due to various travel and holidays.  There's a
lot of driver specific fixes and quirks in here, none of them too major,
and also some fixes for recently introduced memory safety issues in the
topology code.

ath.git tree has moved to a new location. The old location will be an alias to
the new location and will work at least until end of 2024, but best to update
git trees already now.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240626102632.1554485-1-kvalo@kernel.org

We got sad news that Larry is not with us anymore. He was a long time
Linux developer, his first commit was back in 2005 and he has
maintained several wireless drivers over the years. He was known for
patiently supporting Linux users with all sorts of problems they had.
Larry's work helped so many people around the world and I always
enjoyed working with him, even though I sadly never met him.

Rest in Peace, Larry. You will be missed.

Link: https://lore.kernel.org/all/77997185-86a6-41c5-af7a-74e4e9064437@lwfinger.net/
Link: https://arstechnica.com/gadgets/2024/06/larry-finger-linux-wireless-hero-was-a-persistent-patient-coder-and-mentor/Signed-off-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240625103929.1332926-1-kvalo@kernel.org

Modify register setting sequence of enabling inline command
to fix issue of random interrupt from push-button.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/9a7a3a66cbcb426487ca6f558f45e922@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The conversion of SPP to MIDI2 UMP called a wrong function, and the
secondary argument wasn't taken.  As a result, MSB of SPP was always
zero.  Fix to call the right function.

Fixes: e9e02819 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240626145141.16648-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add the following Telit FN912 compositions:

0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=3000 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN912
S:  SerialNumber=92c4c4d8
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T:  Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#=  7 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=3001 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN912
S:  SerialNumber=92c4c4d8
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/20240625102236.69539-1-dnlplm@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The Vivobook S 16X IPS needs a quirks-table entry for the internal microphone to function properly.
Signed-off-by: Vyacheslav Frantsishko <itmymaill@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240626070334.45633-1-itmymaill@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

As noticed by syzbot, calling ieee80211_handle_queued_frames()
(and actually handling frames there) requires softirqs to be
disabled, since we call into the RX code. Fix that in the case
of cleaning up frames left over during shutdown.

Fixes: 177c6ae9 ("wifi: mac80211: handle tasklet frames before stopping")
Reported-by: syzbot+1d516edf1e74469ba5d3@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20240626091559.cd6f08105a6e.I74778610a5ff2cf8680964698131099d2960352a@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

syzbot is able to trigger softlockups, setting NL80211_ATTR_TXQ_QUANTUM
to 2^31.

We had a similar issue in sch_fq, fixed with commit
d9e15a27 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM")

watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:0:24]
Modules linked in:
irq event stamp: 131135
 hardirqs last  enabled at (131134): [<ffff80008ae8778c>] __exit_to_kernel_mode arch/arm64/kernel/entry-common.c:85 [inline]
 hardirqs last  enabled at (131134): [<ffff80008ae8778c>] exit_to_kernel_mode+0xdc/0x10c arch/arm64/kernel/entry-common.c:95
 hardirqs last disabled at (131135): [<ffff80008ae85378>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
 hardirqs last disabled at (131135): [<ffff80008ae85378>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
 softirqs last  enabled at (125892): [<ffff80008907e82c>] neigh_hh_init net/core/neighbour.c:1538 [inline]
 softirqs last  enabled at (125892): [<ffff80008907e82c>] neigh_resolve_output+0x268/0x658 net/core/neighbour.c:1553
 softirqs last disabled at (125896): [<ffff80008904166c>] local_bh_disable+0x10/0x34 include/linux/bottom_half.h:19
CPU: 1 PID: 24 Comm: kworker/1:0 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Workqueue: mld mld_ifc_work
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : __list_del include/linux/list.h:195 [inline]
 pc : __list_del_entry include/linux/list.h:218 [inline]
 pc : list_move_tail include/linux/list.h:310 [inline]
 pc : fq_tin_dequeue include/net/fq_impl.h:112 [inline]
 pc : ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854
 lr : __list_del_entry include/linux/list.h:218 [inline]
 lr : list_move_tail include/linux/list.h:310 [inline]
 lr : fq_tin_dequeue include/net/fq_impl.h:112 [inline]
 lr : ieee80211_tx_dequeue+0x67c/0x3b4c net/mac80211/tx.c:3854
sp : ffff800093d36700
x29: ffff800093d36a60 x28: ffff800093d36960 x27: dfff800000000000
x26: ffff0000d800ad50 x25: ffff0000d800abe0 x24: ffff0000d800abf0
x23: ffff0000e0032468 x22: ffff0000e00324d4 x21: ffff0000d800abf0
x20: ffff0000d800abf8 x19: ffff0000d800abf0 x18: ffff800093d363c0
x17: 000000000000d476 x16: ffff8000805519dc x15: ffff7000127a6cc8
x14: 1ffff000127a6cc8 x13: 0000000000000004 x12: ffffffffffffffff
x11: ffff7000127a6cc8 x10: 0000000000ff0100 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff80009287aa08 x4 : 0000000000000008 x3 : ffff80008034c7fc
x2 : ffff0000e0032468 x1 : 00000000da0e46b8 x0 : ffff0000e0032470
Call trace:
  __list_del include/linux/list.h:195 [inline]
  __list_del_entry include/linux/list.h:218 [inline]
  list_move_tail include/linux/list.h:310 [inline]
  fq_tin_dequeue include/net/fq_impl.h:112 [inline]
  ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854
  wake_tx_push_queue net/mac80211/util.c:294 [inline]
  ieee80211_handle_wake_tx_queue+0x118/0x274 net/mac80211/util.c:315
  drv_wake_tx_queue net/mac80211/driver-ops.h:1350 [inline]
  schedule_and_wake_txq net/mac80211/driver-ops.h:1357 [inline]
  ieee80211_queue_skb+0x18e8/0x2244 net/mac80211/tx.c:1664
  ieee80211_tx+0x260/0x400 net/mac80211/tx.c:1966
  ieee80211_xmit+0x278/0x354 net/mac80211/tx.c:2062
  __ieee80211_subif_start_xmit+0xab8/0x122c net/mac80211/tx.c:4338
  ieee80211_subif_start_xmit+0xe0/0x438 net/mac80211/tx.c:4532
  __netdev_start_xmit include/linux/netdevice.h:4903 [inline]
  netdev_start_xmit include/linux/netdevice.h:4917 [inline]
  xmit_one net/core/dev.c:3531 [inline]
  dev_hard_start_xmit+0x27c/0x938 net/core/dev.c:3547
  __dev_queue_xmit+0x1678/0x33fc net/core/dev.c:4341
  dev_queue_xmit include/linux/netdevice.h:3091 [inline]
  neigh_resolve_output+0x558/0x658 net/core/neighbour.c:1563
  neigh_output include/net/neighbour.h:542 [inline]
  ip6_finish_output2+0x104c/0x1ee8 net/ipv6/ip6_output.c:137
  ip6_finish_output+0x428/0x7a0 net/ipv6/ip6_output.c:222
  NF_HOOK_COND include/linux/netfilter.h:303 [inline]
  ip6_output+0x270/0x594 net/ipv6/ip6_output.c:243
  dst_output include/net/dst.h:450 [inline]
  NF_HOOK+0x160/0x4f0 include/linux/netfilter.h:314
  mld_sendpack+0x7b4/0x10f4 net/ipv6/mcast.c:1818
  mld_send_cr net/ipv6/mcast.c:2119 [inline]
  mld_ifc_work+0x840/0xd0c net/ipv6/mcast.c:2650
  process_one_work+0x7b8/0x15d4 kernel/workqueue.c:3267
  process_scheduled_works kernel/workqueue.c:3348 [inline]
  worker_thread+0x938/0xef4 kernel/workqueue.c:3429
  kthread+0x288/0x310 kernel/kthread.c:388
  ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860

Fixes: 52539ca8 ("cfg80211: Expose TXQ stats and parameters to userspace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240615160800.250667-1-edumazet@google.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

HP EliteBook 645/665 G11 needs ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to
make mic-mute/audio-mute working.
Signed-off-by: Dirk Su <dirk.su@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240626021437.77039-1-dirk.su@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent fix for Lenovo IdeaPad 330-17IKB replaced the quirk entry,
and this eventually breaks the existing quirk for Lenovo Yoga Duet 7
13ITL6 equipped with the same PCI SSID 17aa:3820.

For applying a proper quirk for each model, check the codec SSID
additionally.  Fortunately Yoga Duet has a different codec SSID,
0x17aa3802.

(Interestingly, 17aa:3802 has another conflict of SSID between another
Yoga model vs 14IRP8 which we had to work around similarly.)

Fixes: b1fd0d12 ("ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM")
Link: https://patch.msgid.link/20240625155217.18767-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Testing determined that the recent commit 9e046bb1 ("tcp: clear
tp->retrans_stamp in tcp_rcv_fastopen_synack()") has a race, and does
not always ensure retrans_stamp is 0 after a TFO payload retransmit.

If transmit completion for the SYN+data skb happens after the client
TCP stack receives the SYNACK (which sometimes happens), then
retrans_stamp can erroneously remain non-zero for the lifetime of the
connection, causing a premature ETIMEDOUT later.

Testing and tracing showed that the buggy scenario is the following
somewhat tricky sequence:

+ Client attempts a TFO handshake. tcp_send_syn_data() sends SYN + TFO
  cookie + data in a single packet in the syn_data skb. It hands the
  syn_data skb to tcp_transmit_skb(), which makes a clone. Crucially,
  it then reuses the same original (non-clone) syn_data skb,
  transforming it by advancing the seq by one byte and removing the
  FIN bit, and enques the resulting payload-only skb in the
  sk->tcp_rtx_queue.

+ Client sets retrans_stamp to the start time of the three-way
  handshake.

+ Cookie mismatches or server has TFO disabled, and server only ACKs
  SYN.

+ tcp_ack() sees SYN is acked, tcp_clean_rtx_queue() clears
  retrans_stamp.

+ Since the client SYN was acked but not the payload, the TFO failure
  code path in tcp_rcv_fastopen_synack() tries to retransmit the
  payload skb.  However, in some cases the transmit completion for the
  clone of the syn_data (which had SYN + TFO cookie + data) hasn't
  happened.  In those cases, skb_still_in_host_queue() returns true
  for the retransmitted TFO payload, because the clone of the syn_data
  skb has not had its tx completetion.

+ Because skb_still_in_host_queue() finds skb_fclone_busy() is true,
  it sets the TSQ_THROTTLED bit and the retransmit does not happen in
  the tcp_rcv_fastopen_synack() call chain.

+ The tcp_rcv_fastopen_synack() code next implicitly assumes the
  retransmit process is finished, and sets retrans_stamp to 0 to clear
  it, but this is later overwritten (see below).

+ Later, upon tx completion, tcp_tsq_write() calls
  tcp_xmit_retransmit_queue(), which puts the retransmit in flight and
  sets retrans_stamp to a non-zero value.

+ The client receives an ACK for the retransmitted TFO payload data.

+ Since we're in CA_Open and there are no dupacks/SACKs/DSACKs/ECN to
  make tcp_ack_is_dubious() true and make us call
  tcp_fastretrans_alert() and reach a code path that clears
  retrans_stamp, retrans_stamp stays nonzero.

+ Later, if there is a TLP, RTO, RTO sequence, then the connection
  will suffer an early ETIMEDOUT due to the erroneously ancient
  retrans_stamp.

The fix: this commit refactors the code to have
tcp_rcv_fastopen_synack() retransmit by reusing the relevant parts of
tcp_simple_retransmit() that enter CA_Loss (without changing cwnd) and
call tcp_xmit_retransmit_queue(). We have tcp_simple_retransmit() and
tcp_rcv_fastopen_synack() share code in this way because in both cases
we get a packet indicating non-congestion loss (MTU reduction or TFO
failure) and thus in both cases we want to retransmit as many packets
as cwnd allows, without reducing cwnd. And given that retransmits will
set retrans_stamp to a non-zero value (and may do so in a later
calling context due to TSQ), we also want to enter CA_Loss so that we
track when all retransmitted packets are ACked and clear retrans_stamp
when that happens (to ensure later recurring RTOs are using the
correct retrans_stamp and don't declare ETIMEDOUT prematurely).

Fixes: 9e046bb1 ("tcp: clear tp->retrans_stamp in tcp_rcv_fastopen_synack()")
Fixes: a7abf3cd ("tcp: consider using standard rtx logic in tcp_rcv_fastopen_synack()")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Link: https://patch.msgid.link/20240624144323.2371403-1-ncardwell.sw@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If we're not in a NAPI softirq context, we need to be careful
about how we call napi_consume_skb(), specifically we need to
call it with budget==0 to signal to it that we're not in a
safe context.

This was found while running some configuration stress testing
of traffic and a change queue config loop running, and this
curious note popped out:

[ 4371.402645] BUG: using smp_processor_id() in preemptible [00000000] code: ethtool/20545
[ 4371.402897] caller is napi_skb_cache_put+0x16/0x80
[ 4371.403120] CPU: 25 PID: 20545 Comm: ethtool Kdump: loaded Tainted: G           OE      6.10.0-rc3-netnext+ #8
[ 4371.403302] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 01/23/2021
[ 4371.403460] Call Trace:
[ 4371.403613]  <TASK>
[ 4371.403758]  dump_stack_lvl+0x4f/0x70
[ 4371.403904]  check_preemption_disabled+0xc1/0xe0
[ 4371.404051]  napi_skb_cache_put+0x16/0x80
[ 4371.404199]  ionic_tx_clean+0x18a/0x240 [ionic]
[ 4371.404354]  ionic_tx_cq_service+0xc4/0x200 [ionic]
[ 4371.404505]  ionic_tx_flush+0x15/0x70 [ionic]
[ 4371.404653]  ? ionic_lif_qcq_deinit.isra.23+0x5b/0x70 [ionic]
[ 4371.404805]  ionic_txrx_deinit+0x71/0x190 [ionic]
[ 4371.404956]  ionic_reconfigure_queues+0x5f5/0xff0 [ionic]
[ 4371.405111]  ionic_set_ringparam+0x2e8/0x3e0 [ionic]
[ 4371.405265]  ethnl_set_rings+0x1f1/0x300
[ 4371.405418]  ethnl_default_set_doit+0xbb/0x160
[ 4371.405571]  genl_family_rcv_msg_doit+0xff/0x130
	[...]

I found that ionic_tx_clean() calls napi_consume_skb() which calls
napi_skb_cache_put(), but before that last call is the note
    /* Zero budget indicate non-NAPI context called us, like netpoll */
and
    DEBUG_NET_WARN_ON_ONCE(!in_softirq());

Those are pretty big hints that we're doing it wrong.  We can pass a
context hint down through the calls to let ionic_tx_clean() know what
we're doing so it can call napi_consume_skb() correctly.

Fixes: 386e6986 ("ionic: Make use napi_consume_skb")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240624175015.4520-1-shannon.nelson@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The switch global port interrupt mask, REG_SW_PORT_INT_MASK__4, is
defined as 0x001C in ksz9477_reg.h.  The designers used 32-bit value in
anticipation for increase of port count in future product but currently
the maximum port count is 7 and the effective value is 0x7F in register
0x001F.  Each port has its own interrupt mask and is defined as 0x#01F.
It uses only 4 bits for different interrupts.

The developer who implemented the current interrupt mechanism in the
switch driver noticed there are similarities between the mechanism to
mask port interrupts in global interrupt and individual interrupts in
each port and so used the same code to handle these interrupts.  He
updated the code to use the new macro REG_SW_PORT_INT_MASK__1 which is
defined as 0x1F in ksz_common.h but he forgot to update the 32-bit write
to 8-bit as now the mask registers are 0x1F and 0x#01F.

In addition all KSZ switches other than the KSZ9897/KSZ9893 and LAN937X
families use only 8-bit access and so this common code will eventually
be changed to accommodate them.

Fixes: e1add7dd ("net: dsa: microchip: use common irq routines for girq and pirq")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Link: https://lore.kernel.org/r/1719009262-2948-1-git-send-email-Tristram.Ha@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When dmaengine supports pause function, in suspend state,
dmaengine_pause() is called instead of dmaengine_terminate_async(),

In end of playback stream, the runtime->state will go to
SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen
at this time, application will not resume playback stream, the
stream will be closed directly, the dmaengine_terminate_async()
will not be called before the dmaengine_synchronize(), which
violates the call sequence for dmaengine_synchronize().

This behavior also happens for capture streams, but there is no
SNDRV_PCM_STATE_DRAINING state for capture. So use
dmaengine_tx_status() to check the DMA status if the status is
DMA_PAUSED, then call dmaengine_terminate_async() to terminate
dmaengine before dmaengine_synchronize().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718851218-27803-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

This HP Laptop uses ALC236 codec with COEF 0x07 controlling
the mute LED. Enable existing quirk for this device.
Signed-off-by: Aivaz Latypov <reichaivaz@gmail.com>
Link: https://patch.msgid.link/20240625081217.1049-1-reichaivaz@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>