Because TCP-level resets only affect the subflow, there is a MPTCP
option to indicate that the MPTCP-level connection should be closed
immediately without a mptcp-level fin exchange.

This is the 'MPTCP fast close option'.  It can be carried on ack
segments or TCP resets.  In the latter case, its needed to parse mptcp
options also for reset packets so that MPTCP can act accordingly.

Next patch will add receive side fastclose support in MPTCP.
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When processing options from tcp reset path its possible that
tcp_done(ssk) drops the last reference on the mptcp socket which
results in use-after-free.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use the macro MPTCPOPT_HMAC_LEN instead of a constant in struct
mptcp_options_received.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added the flush addrs testcase. In do_transfer, if the number
of removing addresses is less than 8, use the del addr command to remove
the addresses one by one. If the number is more than 8, use the flush addrs
command to remove the addresses.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When the PM netlink flushes the addresses, invoke the remove address
function mptcp_nl_remove_subflow_and_signal_addr to remove the addresses
and the subflows. Since this function should not be invoked under lock,
move __flush_addrs out of the pernet->lock.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

It has been observed that the kernel sockets created for the subflows
(except the first one) are not in the same cgroup as their parents.
That's because the additional subflows are created by kernel workers.

This is a problem with eBPF programs attached to the parent's
cgroup won't be executed for the children. But also with any other features
of CGroup linked to a sk.

This patch fixes this behaviour.

As the subflow sockets are created by the kernel, we can't use
'mem_cgroup_sk_alloc' because of the current context being the one of the
kworker. This is why we have to do low level memcg manipulation, if
required.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch checks that MHI queue is not full before waking up the net
queue. This fix sporadic MHI queueing issues in xmit. Indeed xmit and
its symmetric complete callback (ul_callback) can run concurently, it
is then not safe to unconditionnaly waking the queue in the callback
without checking queue fullness.

Fixes: 3ffec6a1 ("net: Add mhi-net driver")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1607599507-5879-1-git-send-email-loic.poulain@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The 6220 and 6250 switches do not have a learn2all bit in global1, ATU
control register; bit 3 is reserverd.

On the switches that do have that bit, it is used to control whether
learning frames are sent out the ports that have the message_port bit
set. So rather than adding yet another chip method, use the existence
of the ->port_setup_message_port method as a proxy for determining
whether the learn2all bit exists (and should be set).
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/r/20201210110645.27765-1-rasmus.villemoes@prevas.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, the exception actions are not processed correctly as the wrong
dataset is passed. This change fixes this, including the misleading
comment.

In addition, a check was added to make sure we work on an IPv4 packet,
and not just assume if it's not IPv6 it's IPv4.

This was all tested using OVS with patch,
https://patchwork.ozlabs.org/project/openvswitch/list/?series=21639,
applied and sending packets with a TTL of 1 (and 0), both with IPv4
and IPv6.

Fixes: 69929d4c ("net: openvswitch: fix TTL decrement action netlink message format")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160733569860.3007.12938188180387116741.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

1) Missing dependencies in NFT_BRIDGE_REJECT, from Randy Dunlap.

2) Use atomic_inc_return() instead of atomic_add_return() in IPVS,
   from Yejune Deng.

3) Simplify check for overquota in xt_nfacct, from Kaixu Xia.

4) Move nfnl_acct_list away from struct net, from Miao Wang.

5) Pass actual sk in reject actions, from Jan Engelhardt.

6) Add timeout and protoinfo to ctnetlink destroy events,
   from Florian Westphal.

7) Four patches to generalize set infrastructure to support
   for multiple expressions per set element.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next:
  netfilter: nftables: netlink support for several set element expressions
  netfilter: nftables: generalize set extension to support for several expressions
  netfilter: nftables: move nft_expr before nft_set
  netfilter: nftables: generalize set expressions support
  netfilter: ctnetlink: add timeout and protoinfo to destroy events
  netfilter: use actual socket sk for REJECT action
  netfilter: nfnl_acct: remove data from struct net
  netfilter: Remove unnecessary conversion to bool
  ipvs: replace atomic_add_return()
  netfilter: nft_reject_bridge: fix build errors due to code movement
====================

Link: https://lore.kernel.org/r/20201212230513.3465-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-12-14

1) Expose bpf_sk_storage_*() helpers to iterator programs, from Florent Revest.

2) Add AF_XDP selftests based on veth devs to BPF selftests, from Weqaar Janjua.

3) Support for finding BTF based kernel attach targets through libbpf's
   bpf_program__set_attach_target() API, from Andrii Nakryiko.

4) Permit pointers on stack for helper calls in the verifier, from Yonghong Song.

5) Fix overflows in hash map elem size after rlimit removal, from Eric Dumazet.

6) Get rid of direct invocation of llc in BPF selftests, from Andrew Delgadillo.

7) Fix xsk_recvmsg() to reorder socket state check before access, from Björn Töpel.

8) Add new libbpf API helper to retrieve ring buffer epoll fd, from Brendan Jackman.

9) Batch of minor BPF selftest improvements all over the place, from Florian Lehner,
   KP Singh, Jiri Olsa and various others.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
  selftests/bpf: Add a test for ptr_to_map_value on stack for helper access
  bpf: Permits pointers on stack for helper calls
  libbpf: Expose libbpf ring_buffer epoll_fd
  selftests/bpf: Add set_attach_target() API selftest for module target
  libbpf: Support modules in bpf_program__set_attach_target() API
  selftests/bpf: Silence ima_setup.sh when not running in verbose mode.
  selftests/bpf: Drop the need for LLVM's llc
  selftests/bpf: fix bpf_testmod.ko recompilation logic
  samples/bpf: Fix possible hang in xdpsock with multiple threads
  selftests/bpf: Make selftest compilation work on clang 11
  selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore
  selftests/bpf: Drop tcp-{client,server}.py from Makefile
  selftests/bpf: Xsk selftests - Bi-directional Sockets - SKB, DRV
  selftests/bpf: Xsk selftests - Socket Teardown - SKB, DRV
  selftests/bpf: Xsk selftests - DRV POLL, NOPOLL
  selftests/bpf: Xsk selftests - SKB POLL, NOPOLL
  selftests/bpf: Xsk selftests framework
  bpf: Only provide bpf_sock_from_file with CONFIG_NET
  bpf: Return -ENOTSUPP when attaching to non-kernel BTF
  xsk: Validate socket state in xsk_recvmsg, prior touching socket members
  ...
====================

Link: https://lore.kernel.org/r/20201214214316.20642-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change bpf_iter_task.c such that pointer to map_value may appear
on the stack for bpf_seq_printf() to access. Without previous
verifier patch, the bpf_iter test will fail.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201210013350.943985-1-yhs@fb.com

Currently, when checking stack memory accessed by helper calls,
for spills, only PTR_TO_BTF_ID and SCALAR_VALUE are
allowed.

Song discovered an issue where the below bpf program
  int dump_task(struct bpf_iter__task *ctx)
  {
    struct seq_file *seq = ctx->meta->seq;
    static char[] info = "abc";
    BPF_SEQ_PRINTF(seq, "%s\n", info);
    return 0;
  }
may cause a verifier failure.

The verifier output looks like:
  ; struct seq_file *seq = ctx->meta->seq;
  1: (79) r1 = *(u64 *)(r1 +0)
  ; BPF_SEQ_PRINTF(seq, "%s\n", info);
  2: (18) r2 = 0xffff9054400f6000
  4: (7b) *(u64 *)(r10 -8) = r2
  5: (bf) r4 = r10
  ;
  6: (07) r4 += -8
  ; BPF_SEQ_PRINTF(seq, "%s\n", info);
  7: (18) r2 = 0xffff9054400fe000
  9: (b4) w3 = 4
  10: (b4) w5 = 8
  11: (85) call bpf_seq_printf#126
   R1_w=ptr_seq_file(id=0,off=0,imm=0) R2_w=map_value(id=0,off=0,ks=4,vs=4,imm=0)
  R3_w=inv4 R4_w=fp-8 R5_w=inv8 R10=fp0 fp-8_w=map_value
  last_idx 11 first_idx 0
  regs=8 stack=0 before 10: (b4) w5 = 8
  regs=8 stack=0 before 9: (b4) w3 = 4
  invalid indirect read from stack off -8+0 size 8

Basically, the verifier complains the map_value pointer at "fp-8" location.
To fix the issue, if env->allow_ptr_leaks is true, let us also permit
pointers on the stack to be accessible by the helper.
Reported-by: Song Liu <songliubraving@fb.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201210013349.943719-1-yhs@fb.com

This provides a convenient perf ringbuf -> libbpf ringbuf migration
path for users of external polling systems. It is analogous to
perf_buffer__epoll_fd.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201214113812.305274-1-jackmanb@google.com

Add test for bpf_program__set_attach_target() API, validating it can find
kernel module fentry target.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201211215825.3646154-3-andrii@kernel.org

Support finding kernel targets in kernel modules when using
bpf_program__set_attach_target() API. This brings it up to par with what
libbpf supports when doing declarative SEC()-based target determination.

Some minor internal refactoring was needed to make sure vmlinux BTF can be
loaded before bpf_object's load phase.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201211215825.3646154-2-andrii@kernel.org

According to the X.25 documentation, there was a plan to implement
X.25-over-802.2-LLC. It never finished but left various code stubs in the
X.25 code. At this time it is unlikely that it would ever finish so it
may be better to remove those code stubs.

Also change the documentation to make it clear that this is not a ongoing
plan anymore. Change words like "will" to "could", "would", etc.

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201209033346.83742-1-xie.he.0141@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On a few of our systems, I found frequent 'unshare(CLONE_NEWNET)' calls
make the number of active slab objects including 'sock_inode_cache' type
rapidly and continuously increase.  As a result, memory pressure occurs.

In more detail, I made an artificial reproducer that resembles the
workload that we found the problem and reproduce the problem faster.  It
merely repeats 'unshare(CLONE_NEWNET)' 50,000 times in a loop.  It takes
about 2 minutes.  On 40 CPU cores / 70GB DRAM machine, the available
memory continuously reduced in a fast speed (about 120MB per second,
15GB in total within the 2 minutes).  Note that the issue don't
reproduce on every machine.  On my 6 CPU cores machine, the problem
didn't reproduce.

'cleanup_net()' and 'fqdir_work_fn()' are functions that deallocate the
relevant memory objects.  They are asynchronously invoked by the work
queues and internally use 'rcu_barrier()' to ensure safe destructions.
'cleanup_net()' works in a batched maneer in a single thread worker,
while 'fqdir_work_fn()' works for each 'fqdir_exit()' call in the
'system_wq'.  Therefore, 'fqdir_work_fn()' called frequently under the
workload and made the contention for 'rcu_barrier()' high.  In more
detail, the global mutex, 'rcu_state.barrier_mutex' became the
bottleneck.

This commit avoids such contention by doing the 'rcu_barrier()' and
subsequent lightweight works in a batched manner, as similar to that of
'cleanup_net()'.  The fqdir hashtable destruction, which is done before
the 'rcu_barrier()', is still allowed to run in parallel for fast
processing, but this commit makes it to use a dedicated work queue
instead of the 'system_wq', to make sure that the number of threads is
bounded.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201211112405.31158-1-sjpark@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If interrupt trigger is not set when requesting the interrupt, the core
will take care of reading trigger type from Devicetree.  There is no
point to do it in the driver.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210211824.214949-1-krzk@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

MT7530 has a global RX length register, so we are actually changing its
MRU.
Enable MTU normalization for this reason.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Acked-by: Landen Chao <landen.chao@mediatek.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201210170322.3433-1-dqfext@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2020-12-12

Just one patch this time:

1) Redact the SA keys with kernel lockdown confidentiality.
   If enabled, no secret keys are sent to uuserspace.
   From Antony Antony.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
  xfrm: redact SA secret with lockdown confidentiality
====================

Link: https://lore.kernel.org/r/20201212085737.2101294-1-steffen.klassert@secunet.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-drivers-next-2020-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.11

Second set of patches for v5.11. iwlwifi gaining support for the new
6 GHz band and rtw88 got a new channel. Lots of new features for mt76
and ath11k now has working suspend for PCI devices. And as always,
smaller fixes and cleanups all over.

Major changes:

rtw88
 * add support for channel 144

mt76
 * support for more sta interfaces on mt7615/mt7915
 * mt7915 encapsulation offload
 * performance improvements
 * channel noise report on mt7915
 * mt7915 testmode support
 * mt7915 DBDC support

iwlwifi
 * support 6 GHz band

ath11k
 * suspend support for QCA6390 PCI devices
 * support TXOP duration based RTS threshold
 * mesh: add support for 256 bitmap in blockack frames in 11ax

* tag 'wireless-drivers-next-2020-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (197 commits)
  ath11k: implement suspend for QCA6390 PCI devices
  ath11k: hif: add ce irq enable and disable functions
  ath11k: implement WoW enable and wakeup commands
  ath11k: set credit_update flag for flow controlled ep only
  ath11k: dp: stop rx pktlog before suspend
  ath11k: htc: implement suspend handling
  ath11k: htc: remove unused struct ath11k_htc_ops
  ath11k: pci: read select_window register to ensure write is finished
  ath11k: hif: implement suspend and resume functions
  ath11k: mhi: hook suspend and resume
  ath11k: Fix incorrect tlvs in scan start command
  ath11k: pci: disable VDD4BLOW
  ath11k: pci: fix L1ss clock unstable problem
  ath11k: pci: fix hot reset stability issues
  ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID
  ath11k: mhi: print a warning if firmware crashed
  ath11k: use MHI provided APIs to allocate and free MHI controller
  ath10k: add atomic protection for device recovery
  ath10k: add option for chip-id based BDF selection
  mt76: remove unused variable q
  ...
====================

Link: https://lore.kernel.org/r/20201212050839.EF50EC433C6@smtp.codeaurora.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch adds three new netlink attributes to encapsulate a list of
expressions per set elements:

- NFTA_SET_EXPRESSIONS: this attribute provides the set definition in
  terms of expressions. New set elements get attached the list of
  expressions that is specified by this new netlink attribute.
- NFTA_SET_ELEM_EXPRESSIONS: this attribute allows users to restore (or
  initialize) the stateful information of set elements when adding an
  element to the set.
- NFTA_DYNSET_EXPRESSIONS: this attribute specifies the list of
  expressions that the set element gets when it is inserted from the
  packet path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch replaces NFT_SET_EXPR by NFT_SET_EXT_EXPRESSIONS. This new
extension allows to attach several expressions to one set element (not
only one single expression as NFT_SET_EXPR provides). This patch
prepares for support for several expressions per set element in the
netlink userspace API.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
A new set of wireless changes:
 * validate key indices for key deletion
 * more preamble support in mac80211
 * various 6 GHz scan fixes/improvements
 * a common SAR power limitations API
 * various small fixes & code improvements

* tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits)
  mac80211: add ieee80211_set_sar_specs
  nl80211: add common API to configure SAR power limitations
  mac80211: fix a mistake check for rx_stats update
  mac80211: mlme: save ssid info to ieee80211_bss_conf while assoc
  mac80211: Update rate control on channel change
  mac80211: don't filter out beacons once we start CSA
  mac80211: Fix calculation of minimal channel width
  mac80211: ignore country element TX power on 6 GHz
  mac80211: use bitfield helpers for BA session action frames
  mac80211: support Rx timestamp calculation for all preamble types
  mac80211: don't set set TDLS STA bandwidth wider than possible
  mac80211: support driver-based disconnect with reconnect hint
  cfg80211: support immediate reconnect request hint
  mac80211: use struct assignment for he_obss_pd
  cfg80211: remove struct ieee80211_he_bss_color
  nl80211: validate key indexes for cfg80211_registered_device
  cfg80211: include block-tx flag in channel switch started event
  mac80211: disallow band-switch during CSA
  ieee80211: update reduced neighbor report TBTT info length
  cfg80211: Save the regulatory domain when setting custom regulatory
  ...
====================

Link: https://lore.kernel.org/r/20201211142552.209018-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move the nft_expr structure definition before nft_set. Expressions are
used by rules and sets, remove unnecessary forward declarations. This
comes as preparation to support for multiple expressions per set element.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Currently, the set infrastucture allows for one single expressions per
element. This patch extends the existing infrastructure to allow for up
to two expressions. This is not updating the netlink API yet, this is
coming as an initial preparation patch.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

DESTROY events do not include the remaining timeout.

Add the timeout if the entry was removed explicitly. This can happen
when a conntrack gets deleted prematurely, e.g. due to a tcp reset,
module removal, netdev notifier (nat/masquerade device went down),
ctnetlink and so on.

Add the protocol state too for the destroy message to check for abnormal
state on connection termination.

Joint work with Pablo.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().

strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.

Conflicts:
	net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ath.git patches for v5.11. Major changes:

ath11k

* suspend support for QCA6390 PCI devices

* support TXOP duration based RTS threshold

* mesh: add support for 256 bitmap in blockack frames in 11ax

Now that all the needed pieces are in place implement suspend support QCA6390
PCI devices. All other devices will return -EOPNOTSUPP during suspend. The
suspend is implemented by switching the firmware to WoW mode during suspend, so
the firmware will be running on low power mode while host is in suspend.

At the moment we are not able to shutdown and fully power off the device due to
bugs in MHI subsystem, so WoW mode is a workaround for the time being.

During suspend we enable WoW mode, disable CE irq and DP irq, then put MHI to
suspend state.  During resume, driver resumes MHI firstly, then enables CE irq
and dp IRQ, and sends WoW wakeup command to firmware.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-11-git-send-email-kvalo@codeaurora.org

Add ce irq enable and disable hif layer functions, so core module can enable
enable them without cleaning pipe and refilling pipe. Needed for suspend.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-10-git-send-email-kvalo@codeaurora.org

Implement wow enable ane wow wakeup commands which are needed for suspend.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-9-git-send-email-kvalo@codeaurora.org

Firmware will check all the pipes before entering WoW mode during suspend. If
ATH11K_HTC_FLAG_NEED_CREDIT_UPDATE is set, firmware treats this pipe needed to
return credit even though it's actually not required. If any pipe needs to
return credit, the suspend_complete message doesn't send to host but is
dropped.  So host gets time out and WoW suspend failed.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-8-git-send-email-kvalo@codeaurora.org

Stop dp rx pktlog when entering suspend and reap the mon_status buffer to keep
it empty. During resume restart the reap timer.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-7-git-send-email-kvalo@codeaurora.org

When ath11k sends suspend command to firmware, firmware will
return suspend_complete events and add handlers for those.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-6-git-send-email-kvalo@codeaurora.org

No need for it so remove. Compile tested only.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-5-git-send-email-kvalo@codeaurora.org

Just when resume from WoW, the write to select_window doesn't take
effect immediately, so read the register again to ensure the write
operation is finished.

Another change is to reset select_window to ZERO because this
register isn't restored after WoW, so the content of this register
becomes ZERO too.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-4-git-send-email-kvalo@codeaurora.org

For suspend support add suspend and resume to HIF layer. These ops are optional
and, for example, AHB bus driver does not need to implement these.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-3-git-send-email-kvalo@codeaurora.org

MHI suspend and resume isn't hooked in ath11k yet, so hook these
functions needed for suspend support.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-2-git-send-email-kvalo@codeaurora.org