- 17 Mar, 2023 1 commit
-
-
Peter Ujfalusi authored
Introduce a helper function to update the message template for a kcontrol associated with a widget. In this way the helper can be re-used by other components later. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Jaska Uimonen <jaska.uimonen@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230316151137.7598-2-peter.ujfalusi@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 16 Mar, 2023 2 commits
-
-
Otabek Nazrullaev authored
Convert Maxim MAX9759 Speaker Amplifier bindings to DT schema. Add missing gpio header file into examples section Signed-off-by:
Otabek Nazrullaev <otabeknazrullaev1998@gmail.com> Cc: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230315173404.7215-1-otabeknazrullaev1998@gmail.comSigned-off-by:
-
Vijaya Anand authored
Convert the binding document for adi,adau17x1 from txt to yaml so one could validate dt-entries correctly and any future additions can go into yaml format. Add address and size cells to example to prevent errors regarding reg format. Signed-off-by:
Vijaya Anand <sunrockers8@gmail.com> Cc: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by:
-
- 15 Mar, 2023 1 commit
-
-
Geert Uytterhoeven authored
Miscellaneous updates to make the example match reality: - Correct SSI resource region size, - Complete half-conversion to new-style CPG/MSSR bindings, - Add missing power-domains, resets, and reset-names properties, - Use interrupt binding definitions instead of hardcoded numbers, - Correct interrupt flags, - Drop double blank line. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/ba4ec999dc152ea1f113253e497c093b8789d414.1678790879.git.geert+renesas@glider.beSigned-off-by:
-
- 14 Mar, 2023 8 commits
-
-
Mark Brown authored
Merge series from "Nícolas F. R. A. Prado" <nfraprado@collabora.com>: A couple commits to make the mt8192 sound driver not spam the console.
-
Herve Codina authored
The QMC depends on (SOC_FSL && COMPILE_TEST). SOC_FSL does not exist. Fix the dependency using the correct one: FSL_SOC. Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20230314082157.137176-1-herve.codina@bootlin.comSigned-off-by:
-
Kuninori Morimoto authored
substream->runtime will be attached when substream was opened at snd_pcm_attach_substream(). When it uses DPCM, FE substream->runtime is attached, but BE substream->runtime is not. Thus, we are copying FE substream->runtime to BE. But, we are copyig FE substream->runtime to FE dpcm->runtime first (A), and copy it to BE dpcm->runtime (B), and copy it to BE substream->runtime (C). static int dpcm_fe_dai_open(...) { ... (A) fe->dpcm[stream].runtime = fe_substream->runtime; ... } static int dpcm_be_connect(...) { ... (B) be->dpcm[stream].runtime = fe->dpcm[stream].runtime; ... } int dpcm_be_dai_startup(...) { ... (C) be_substream->runtime = be->dpcm[stream].runtime; ... } It is too roundabout and troublesome. OTOH, it is directly copying fe_substream->runtime at dpcm_be_reparent() without using be->dpcm[stream].runtime. static void dpcm_be_reparent(...) { ... for_each_dpcm_fe(be, stream, dpcm) { ... => be_substream->runtime = fe_substream->runtime; break; } } This patch removes indirect copying. Signed-off-by: -
Kuninori Morimoto authored
dai->probed is used at snd_soc_pcm_dai_probe/remove(), and used to call real remove() function only when it was probed. int snd_soc_pcm_dai_probe(...) { ... for_each_rtd_dais(rtd, i, dai) { ... if (dai->driver->probe) { (A) int ret = dai->driver->probe(dai); if (ret < 0) return soc_dai_ret(dai, ret); } => dai->probed = 1; } ... } int snd_soc_pcm_dai_remove(...) { ... for_each_rtd_dais(rtd, i, dai) { ... => if (dai->probed && ...) { ... } => dai->probed = 0; } ... } But on probe() case, we need to check dai->probed before calling real probe() function at (A), otherwise real probe() might be called multi times (but real remove() will be called only once). This patch checks it at probe(). Signed-off-by: -
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: The modules in IPC4 can have multiple 'pins' on their input and output and these pins can receive or output audio in different formats. Currently we assume that all pins are using the same format which is a limitation that needs to be lifted in order to support more complex components. This series will extend and rework the format handling to allow different formats on pins.
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: This series will add support for bytes control and topology types. With IPC4 only the binary payload is sent to the firmware via LARGE_CONFIG message (which does similar multi-part message handling as the IPC3 control message did). The bytes payload itself is not checked by the kernel but user space expected to wrap it in sof_abi_hdr struct in order to get the target information of the binary data. The SOF firmware and sof-ctl have been updated to support blobs used in IPC4 setups.
-
Nícolas F. R. A. Prado authored
There are many log messages throughout the mt8192 sound drivers that print to the info level and are triggered very frequently. Move these messages to the debug level to avoid spamming the console. Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230313212908.2282961-3-nfraprado@collabora.comSigned-off-by:
-
There are some log messages in the mt8192 sound code that print the function name, presumably to aid in tracing. However this can also be achieved by ftrace and without spamming the console, so remove these messages. Signed-off-by:
-
- 13 Mar, 2023 28 commits
-
-
Ajye Huang authored
Enable Bluetooth audio offload for drv_name "adl_rt1019_rt5682" with following board configuration specifically: SSP0 - rt5682 Headset SSP1 - alc1019p speaker amp SSP2 - Bluetooth audio Signed-off-by:
Ajye Huang <ajye_huang@compal.corp-partner.google.com> Signed-off-by:
Mac Chiang <mac.chiang@intel.com> Acked-by:
-
Mark Brown authored
Merge series from Trevor Wu <trevor.wu@mediatek.com>: Coverity reports some UNINIT and CERT STR31-C problems, so we add initialization and dai id check to resolve problems.
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: sound/soc/codecs/zl38060.c:611:34: error: ‘zl38_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: sound/soc/codecs/src4xxx-i2c.c:27:34: error: ‘src4xxx_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: sound/soc/codecs/rt1019.c:549:34: error: ‘rt1019_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: sound/soc/codecs/pcm179x-spi.c:32:34: error: ‘pcm179x_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: sound/soc/codecs/adau1977-spi.c:58:34: error: ‘adau1977_spi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Tom Rix authored
smatch reports sound/soc/codecs/sma1303.c:1594:28: warning: symbol 'sma_i2c_regmap' was not declared. Should it be static? sma_i2c_regmap is only used in sma1303, so it should be static Signed-off-by:
Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230309140959.2616497-1-trix@redhat.comSigned-off-by:
-
Chao Song authored
During route setup, playback stream routes are setup by going through sink path, capture stream routes are set up by going through source path. This is not sufficient to handle loopback cases between pipelines configured with different directions, e.g. a sidetone or an amplifier feedback connected to a speaker protection module. So, add the logic to handle such routes between widgets that aren't in the list of DAPM widgets associated with the same PCM. Link: https://github.com/thesofproject/linux/issues/4042Suggested-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Chao Song <chao.song@linux.intel.com> Signed-off-by:
-
Trevor Wu authored
Coverity shows decaring variable reg without initializer. When regmap_read returns an error, reg keeps the value left from earlier computation. To prevent from the unexpected result in the case, assign 0 to reg. Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20230307040938.7484-5-trevor.wu@mediatek.comSigned-off-by:
-
Trevor Wu authored
Coverity shows decaring variable reg without initializer. When regmap_read returns an error, reg keeps the value left from earlier computation. To prevent from the unexpected result in the case, assign 0 to reg. Signed-off-by:
-
Trevor Wu authored
Coverity shows using uninitialized value monitor. When regmap_read returns an error, monitor keeps the value left from earlier computation. To prevent from the unexpected result in the case, assign 0 to monitor. Signed-off-by:
-
Trevor Wu authored
Coverity shows "afe_priv->dai_priv[dai_id] evaluates to an address that could be at negative offset of an array.". Add dai id check before accessing the array element. This ensures that the offset of an array must be a valid index. Signed-off-by:
-
Ranjani Sridharan authored
Base config only contains the input/output audio formats for pin 0. So match only the pin 0 formats during runtime format selection. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
-
Ranjani Sridharan authored
In preparation for handling processing modules with different input/output pin counts, introduce two new tokens for input/output audio format counts. Use these token values to parse all the available audio formats from topology. Signed-off-by:
-
Ranjani Sridharan authored
Remove the field in struct sof_ipc4_available_audio_format and pass the format list to be searched as an argument to sof_ipc4_init_audio_fmt() directly. Signed-off-by:
-
Ranjani Sridharan authored
Only the copier needs to set the output format in its IPC payload. So move the code to set the output format inside sof_ipc4_prepare_copier_module() and modify the signature of sof_ipc4_init_audio_fmt() to remove the out_format argument. Signed-off-by:
-
Ranjani Sridharan authored
Introduce a new struct sof_ipc4_pin_format which contains the pin index and the buffer size. Replace the type of available input/output audio formats in struct sof_ipc4_available_audio_format with this new struct type and rename them to input_pin_fmts and output_pin_fmts. Also, add a new token, SOF_TKN_CAVS_AUDIO_FORMAT_PIN_INDEX that will be used to parse the pin index for the audio format from topology. Currently we only set the audio format for Pin 0 in topology, so the default value will be 0 for all audio formats. Finally, parse the pin_index and the input/output buffer sizes along with audio formats into the pin_format arrays in struct sof_ipc4_available_audio_format. This makes the base_config array in struct sof_ipc4_available_audio_format redundant. So remove it. This change will allow the addition of audio formats for the non-zero pins in topology transparent to the topology parser in the kernel. Signed-off-by:
-
Ranjani Sridharan authored
Parse the output formats available in topology always. Whether the output format is sent in the init instance payload or not is decided when sof_ipc4_init_audio_fmt() is invoked. Signed-off-by:
-
Ranjani Sridharan authored
There is no need to parse the cpc and is_pages values multiple times. It is enough to parse the 2 tokens directly into the base_config field in each module's init_instance IPC payload. Signed-off-by:
-
Ranjani Sridharan authored
Do not parse the SOF_TKN_CAVS_AUDIO_FORMAT_DMA_BUFFER_SIZE token as the dma_buffer_size can be derived from the input/output buffer size and the type of widget during copier prepare. For the deep buffer case, introduce a new token that will be used to get the deep buffer DMA size for the host copier from topology. Signed-off-by:
-
Ranjani Sridharan authored
Add a new field, input_audio_fmts, in struct sof_ipc4_available_audio_format and parse all the available input audio formats into this new field and not into the base_config field. This is preparation to remove the base_config array from the struct sof_ipc4_available_audio_format. This simplifies the sof_ipc4_init_audio_fmt() function as the reference audio format for matching with input params has the same size. Signed-off-by:
-
Ranjani Sridharan authored
Currently we use input/output and sink/source pins interchangeably. Remove the references to sink/source pins and replace with input/output pins everywhere for consistency and clarity. Signed-off-by:
-
Ranjani Sridharan authored
Rename SOF_TKN_CAVS_AUDIO_FORMAT_IN_VALID and SOF_TKN_CAVS_AUDIO_FORMAT_OUT_VALID as SOF_TKN_CAVS_AUDIO_FORMAT_IN_VALID_BIT_DEPTH and SOF_TKN_CAVS_AUDIO_FORMAT_OUT_VALID_BIT_DEPTH respectively. These are currently not used. Signed-off-by:
-
Mark Brown authored
New SOF changes require the current set of fixes.
-
Peter Ujfalusi authored
Add support for bytes control by implementing bytes_get/put and bytes_ext_get/put and blobs with either module init instance or large config type. For module init instance type the put will only update the stored configuration blob and it is going to be taken into use next time the module is (re-)initialized. Large config type of blobs are sent to the firmware whenever the DSP is powered up. Signed-off-by:
-
Libin Yang authored
Add byte type support for IPC4. The bytes controls are used to transfer configuration blobs to/from firmware via large_config messages. Signed-off-by:
Libin Yang <libin.yang@intel.com> Reviewed-by:
-
Libin Yang authored
Make sure sof_ipc4_set_volume_data() is only called for the SND_SOC_TPLG_CTL_VOLSW, SND_SOC_TPLG_CTL_VOLSW_SX and SND_SOC_TPLG_CTL_VOLSW_XR_SX info_type. Signed-off-by:
-
