- 16 Mar, 2012 36 commits
-
-
Zhicheng Fan authored
Signed-off-by:
Zhicheng Fan <b32736@freescale.com> Acked-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Zhicheng Fan authored
The mpc85xx_rdb and mpc85xx_mds have commom define of signal multiplex for qe, so they need to go in common header, the patch abstract them to fsl_guts.h Signed-off-by:
-
Timur Tabi authored
Remove the "select PHYS_64BIT" from the Kconfig entry for the P1022DS, so that large physical address support is a selectable option for non-CoreNet reference boards. The option is enabled in mpc85xx_[smp_]defconfig so that the default is unchanged. However, now it can be deselected. The P1022DS had this option defined because the default device tree for this board uses 36-bit addresses. This had the side-effect of forcing this option on for all boards that use mpc85xx_[smp_]defconfig. Some users may want to disable this feature to create an optimized configuration for boards with <= 2GB of RAM. Signed-off-by:
-
chenhui zhao authored
Signed-off-by:
Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by:
Li Yang <leoli@freescale.com> Signed-off-by:
-
Liu Shuo authored
Fix the compatible string of sec 4.0 to match with CAAM driver according to Documentation/devicetree/bindings/crypto/fsl-sec4.txt Signed-off-by:
Liu Shuo <shuo.liu@freescale.com> Signed-off-by:
Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by:
-
Claudiu Manoil authored
fsl_85xx_l2ctlr.o and fsl_85xx_cache_sram.o are built only if CONFIG_FSL_85XX_CACHE_SRAM is defined. The driver that qualifies and wants to make use of the CACHE SRAM's exported API (i.e. a freescale net driver) should (be able to) select this config option. Signed-off-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
-
Claudiu Manoil authored
CC arch/powerpc/sysdev/fsl_85xx_l2ctlr.o arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:209:13: error: 'THIS_MODULE' undeclared here (not in a function) arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:229:20: error: expected declaration specifiers or '...' before string constant cc1: warnings being treated as errors arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:229:1: error: data definition has no type or storage class arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:229:1: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:229:20: error: function declaration isn't a prototype arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:230:16: error: expected declaration specifiers or '...' before string constant arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:230:1: error: data definition has no type or storage class arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:230:1: error: type defaults to 'int' in declaration of 'MODULE_LICENSE' arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:230:16: error: function declaration isn't a prototype make[1]: *** [arch/powerpc/sysdev/fsl_85xx_l2ctlr.o] Error 1 ... CC arch/powerpc/sysdev/fsl_85xx_cache_sram.o cc1: warnings being treated as errors arch/powerpc/sysdev/fsl_85xx_cache_sram.c:69:1: error: data definition has no type or storage class arch/powerpc/sysdev/fsl_85xx_cache_sram.c:69:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/powerpc/sysdev/fsl_85xx_cache_sram.c:69:1: error: parameter names (without types) in function declaration arch/powerpc/sysdev/fsl_85xx_cache_sram.c:80:1: error: data definition has no type or storage class arch/powerpc/sysdev/fsl_85xx_cache_sram.c:80:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/powerpc/sysdev/fsl_85xx_cache_sram.c:80:1: error: parameter names (without types) in function declaration make[1]: *** [arch/powerpc/sysdev/fsl_85xx_cache_sram.o] Error 1 Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Paul Gortmaker authored
The mpc836x_mds platform has been broken since the commit 6fe32649 "netdev/phy: Use mdiobus_read() so that proper locks are taken" which caused the fsl_pq_mdio TBI autoprobe to oops. The oops was "fixed" in commit 28d8ea2d "fsl_pq_mdio: Clean up tbi address configuration" by simply removing the the autoscan code, and making tbi nodes mandatory. Some of the newer reference platforms were updated to have tbi nodes in 22066949 "powerpc: Add TBI PHY node to first MDIO bus" but the older mpc836x didn't get one and hence was just failing with -EBUSY as follows: fsl-pq_mdio: probe of e0102120.mdio failed with error -16 ... net eth0: Could not attach to PHY eth0: Cannot initialize PHY, aborting. Add a TBI node and use the 1st free address for it. Signed-off-by:
-
Timur Tabi authored
When the P1022's DIU video controller is active, the pixis must be accessed in "indirect" mode, which uses localbus chip select addresses. Switching between the DVI and LVDS monitor ports is handled by the pixis, so that switching needs to be done via indirect mode. This has the side-effect of no longer requiring U-Boot to enable the DIU. Now Linux can enable the DIU all by itself. Signed-off-by:
-
Martyn Welch authored
Initial board support for the GE IMP3A, a 3U compactPCI card with a p2020 processor. Signed-off-by:
Martyn Welch <martyn.welch@ge.com> Signed-off-by:
-
Martyn Welch authored
Move the GE PIC drivers to allow these to be used by non-86xx boards. Signed-off-by:
-
Martyn Welch authored
The GE GPIO driver provides basic support (set direction, read/write state) for the GPIO provided on some GE single board computers. This patch moves the driver from the 86xx specific platform directrory to the GPIO subsystem so that it can be used on non-86xx boards. Signed-off-by:
-
Martyn Welch authored
This patch adds the GE_FPGA configuration option. This is being carried out as ground work to allow the PIC and GPIO drivers to be move from the powerpc 86xx platform directory to more general locations to allow them to be used on non-86xx boards and to reduce churn when further boards using these drivers are added. Signed-off-by:
-
Zhicheng Fan authored
P1020RDB-PC Overview ------------------ 1Gbyte DDR3 SDRAM 32 Mbyte NAND flash 10 16Mbyte NOR flash 16 Mbyte SPI flash SD connector to interface with the SD memory card Real-time clock on I2C bus PCIe: - x1 PCIe slot - x1 mini-PCIe slot 10/100/1000 BaseT Ethernet ports: - eTSEC1, RGMII: one 10/100/1000 port using VitesseTM VSC7385 L2 switch - eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221 - eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021 USB 2.0 port: - Two USB2.0 Type A receptacles - One USB2.0 signal to Mini PCIe slot Dual RJ45 UART ports: - DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by:
-
Zhicheng Fan authored
Signed-off-by:
-
Jerry Huang authored
The p1020utm-pc has the similar feature as the p1020rdb. Therefore, p1020utm-pc use the same platform file as the p1/p2 rdb board. Overview of P1020UTM-PC platform: - DDR3 1GB - NOR flash 32MB - I2C EEPROM 256Kb - eTSEC1 (RGMII PHY Atheros AR8021) - eTSEC2 (SGMII PHY Vitesse VSC8221) - eTSEC3 (RGMII PHY Atheros AR8021) - SDHC - 2 USB ports - PCIe (Lane1 to dual SATA controller) Signed-off-by:Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by:
-
Jerry Huang authored
The p1020mbg-pc has the similar feature as the p1020rdb. Therefore, p1020mbg-pc use the same platform file as the p1/p2 rdb board. Overview of P1020MBG-PC platform: - DDR3 2GB - NOR flash 64MB - I2C EEPROM 256Kb - eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch - eTSEC2 (SGMII PHY) - eTSEC3 (RGMII PHY) - SDHC - 2 USB ports - 4 TDM ports - PCIe (Lane1 to dual SATA controller) Signed-off-by: -
Prabhakar Kushwaha authored
Integrated Flash Controller(IFC) can be used to hook NAND Flash chips using NAND Flash Machine available on it. Signed-off-by:
Dipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Liu Shuo <b35362@freescale.com> Signed-off-by:
Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by:
Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by:
-
Jia Hongtao authored
Signed-off-by:
Jin Qing <b24347@freescale.com> Signed-off-by:
Jia Hongtao <B38951@freescale.com> Signed-off-by:
-
Timur Tabi authored
The Freescale P1022 has a unique pin muxing "feature" where the DIU video controller's video signals are muxed with 24 of the local bus address signals. When the DIU is enabled, the bulk of the local bus is disabled, preventing access to memory-mapped devices like NOR flash and the pixis FPGA. Therefore, if the DIU is going to be enabled, then memory-mapped devices on the localbus, like NOR flash, need to be disabled. This also means that the localbus is not a 'simple-bus' any more, so remove that string from the compatible node. Signed-off-by:
-
Timur Tabi authored
Create a 32-bit address space version of p1022ds.dts. To avoid confusion, p1022ds.dts is renamed to p1022ds_36b.dts. We also create p1022ds.dtsi to store some common nodes. Signed-off-by:
-
Xie Xiaobo authored
The properties indicates that the hardware supports waking up via magic packet. Signed-off-by:
Xie Xiaobo <X.Xie@freescale.com> Signed-off-by:
-
Xie Xiaobo authored
Add partitions for NOR and NAND Flash. Signed-off-by:
-
Liu Shuo authored
Signed-off-by:
Liu Shuo <soniccat.liu@gmail.com> Acked-by:
-
Gustavo Zacarias authored
Fix typo introduced by "powerpc: Add TBI PHY node to first MDIO bus" from Andy Fleming. It's device_type rather than device-type, which causes the mdio probe to fail thus making all gianfar ethernet interfaces unusable. Signed-off-by:
Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by:
-
Sebastian Andrzej Siewior authored
This is here most likely since the FSL bsp. Back in the FSL bsp it was set to 50Mhz and working. However the driver divided the SoC freq. only by 2. According to the TRM the platform clock (which the manual refers in its formula) is the system clock divided by two. So in the end it has to divide by 4 and this is what the fsl-spi driver in tree is doing. Since then the flash is not wokring I guess. After chaning the freq from 50Mhz to 40Mhz like others do then I can access the flash. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
It is not at 0xffa00000. According to current u-boot source the NAND controller is always at 0xff800000 and it is either at CS0 or CS1 depending on NAND or NAND+NOR mode. In 36bit mode it is shifted to 0xfff800000 but it has always an eight there and never an A. Signed-off-by:
-
Liu Gang authored
For the file "arch/powerpc/sysdev/fsl_rmu.c", there will be some compile errors while using the corenet64_smp_defconfig: .../fsl_rmu.c:315: error: cast from pointer to integer of different size .../fsl_rmu.c:320: error: cast to pointer from integer of different size .../fsl_rmu.c:320: error: cast to pointer from integer of different size .../fsl_rmu.c:320: error: cast to pointer from integer of different size .../fsl_rmu.c:330: error: cast to pointer from integer of different size .../fsl_rmu.c:332: error: cast to pointer from integer of different size .../fsl_rmu.c:339: error: cast to pointer from integer of different size .../fsl_rmu.c:340: error: cast to pointer from integer of different size .../fsl_rmu.c:341: error: cast to pointer from integer of different size .../fsl_rmu.c:348: error: cast to pointer from integer of different size .../fsl_rmu.c:348: error: cast to pointer from integer of different size .../fsl_rmu.c:348: error: cast to pointer from integer of different size .../fsl_rmu.c:659: error: cast from pointer to integer of different size .../fsl_rmu.c:659: error: format '%8.8x' expects type 'unsigned int', but argument 5 has type 'size_t' .../fsl_rmu.c:985: error: cast from pointer to integer of different size .../fsl_rmu.c:997: error: cast to pointer from integer of different size Rewrote the corresponding code with the support of 64bit building. Signed-off-by:Liu Gang <Gang.Liu@freescale.com> Signed-off-by:
Shaohui Xie <Shaohui.Xie@freescale.com> Reported-by:
-
Liu Gang authored
For the file "arch/powerpc/sysdev/fsl_rio.c", there will be some relocation errors while using the corenet64_smp_defconfig: WARNING: modpost: Found 6 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' GEN .version CHK include/generated/compile.h UPD include/generated/compile.h CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 arch/powerpc/sysdev/built-in.o:(__ex_table+0x0): relocation truncated to fit: R_PPC64_ADDR16 against `.text'+3208 arch/powerpc/sysdev/built-in.o:(__ex_table+0x2): relocation truncated to fit: R_PPC64_ADDR16 against `.fixup' arch/powerpc/sysdev/built-in.o:(__ex_table+0x4): relocation truncated to fit: R_PPC64_ADDR16 against `.text'+3230 arch/powerpc/sysdev/built-in.o:(__ex_table+0x6): relocation truncated to fit: R_PPC64_ADDR16 against `.fixup'+c arch/powerpc/sysdev/built-in.o:(__ex_table+0x8): relocation truncated to fit: R_PPC64_ADDR16 against `.text'+3250 arch/powerpc/sysdev/built-in.o:(__ex_table+0xa): relocation truncated to fit: R_PPC64_ADDR16 against `.fixup'+18 Rewrote the corresponding code with the support of 64bit building. Signed-off-by:
-
Zhicheng Fan authored
P1025RDB Overview ------------------ 1Gbyte DDR3 SDRAM 32 Mbyte NAND flash 16Mbyte NOR flash 16 Mbyte SPI flash SD connector to interface with the SD memory card Real-time clock on I2C bus PCIe: - x1 PCIe slot - x1 mini-PCIe slot 10/100/1000 BaseT Ethernet ports: - eTSEC1, RGMII: one 10/100/1000 port using AtherosTM AR8021 - eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221 - eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021 USB 2.0 port: - Two USB2.0 Type A receptacles - One USB2.0 signal to Mini PCIe slot Dual RJ45 UART ports: - DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by:
-
Zhicheng Fan authored
Signed-off-by:
-
Ramneek Mehresh authored
Add usb controller version info for the following: MPC8536, P1010, P1020, P1021, P1022, P1023, P2020, P2041, P3041, P3060, P5020 Signed-off-by:
Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by:
-
Tang Yuantian authored
Signed-off-by:
Tang Yuantian <b29983@freescale.com> Signed-off-by:
-
Tang Yuantian authored
P2020RDB-PC Board shares the same design(PCB) as P102x RDB style platforms. The difference between this platform and the already existing P2020RDB is mainly with respect to DDR. The P2020RDB-PC has a DDR3 memory. The P2020RDB-PC also has a CPLD device connected to local bus. The main differences from the P102x RDB-PC is 64-bit DDR and SYSCLK of 100Mhz. Signed-off-by:
-
Xu Jiucheng authored
Signed-off-by:
Xu Jiucheng <B37781@freescale.com> Signed-off-by:
-
Xu Jiucheng authored
P1021RDB-PC Overview ----------------- 1Gbyte DDR3 (on board DDR) 16Mbyte NOR flash 32Mbyte eSLC NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory Real-time clock on I2C bus SD/MMC connector to interface with the SD memory card PCIex - x1 PCIe slot or x1 PCIe to dual SATA controller - x1 mini-PCIe slot USB 2.0 - ULPI PHY interface: SMSC USB3300 USB PHY and Genesys Logic’s GL850A - Two USB2.0 Type A receptacles - One USB2.0 signal to Mini PCIe slot eTSEC1: Connected to RGMII PHY VSC7385 eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY AR8021 DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by:Matthew McClintock <msm@freescale.com> Signed-off-by:
-
- 15 Mar, 2012 3 commits
-
-
Kumar Gala authored
Add basic support for e6500 core in its single threaded mode. Signed-off-by: -
Kumar Gala authored
The registers that describe size supported by TLB are different on MMU v2 as well as we support power of two page sizes. For now we continue to assume that FSL variable size array supports all page sizes up to the maximum one reported in TLB1PS. Signed-off-by: -
Paul Gortmaker authored
The SERIAL_8250_EXTENDED option just enables access to other less regularly used options, like SERIAL_8250_SHARE_IRQ. Select it to get rid of this warning when selecting the child option living underneath it. warning: (FSL_SOC_BOOKE && SERIAL_8250_RM9K) selects SERIAL_8250_SHARE_IRQ which has unmet direct dependencies (HAS_IOMEM && SERIAL_8250_EXTENDED) Signed-off-by:
-
- 12 Mar, 2012 1 commit
-
-
Benjamin Herrenschmidt authored
-
