- 17 Nov, 2022 6 commits
-
-
Jiapeng Chong authored
The function get_pt_type is defined in the gtt.c file, but not called elsewhere, so delete this unused function. drivers/gpu/drm/i915/gvt/gtt.c:285:19: warning: unused function 'get_pt_type'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2277Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220926064044.53016-1-jiapeng.chong@linux.alibaba.comReviewed-by:
-
wangjianli authored
Delete the redundant word 'the'. Signed-off-by:
wangjianli <wangjianli@cdjrlc.com> Signed-off-by:
-
Zhi Wang authored
The life cycle of a vGPU, which is represented by a vfio_device, has been managed by the VFIO core logic. Remove the vgpu->released, which was used for a sanity check on the removal path of the vGPU instance. The sanity check has already been covered in the VFIO core logic. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: intel-gvt-dev@lists.freedesktop.org Suggested-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Signed-off-by:
-
Paulo Miguel Almeida authored
struct gvt_firmware_header has a crc32 member in which all members that come after the that field are used to calculate it. The previous implementation added the value '4' (crc32's u32 size) to calculate the crc32_start offset which came across as a bit cryptic until you take a deeper look at the struct. This patch changes crc32_start offset to the 'version' member which is the first member of the struct gvt_firmware_header after crc32. It's worth mentioning that doing a build before/after this patch results in no binary output differences. Signed-off-by:
Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Some functions seem to have been renamed without updating the kernel-doc markup causing warnings. Also, struct intel_vgpu_dmabuf_obj is not properly documented, but has a kerneld-doc markup. Fix those warnings: drivers/gpu/drm/i915/gvt/aperture_gm.c:308: warning: expecting prototype for inte_gvt_free_vgpu_resource(). Prototype was for intel_vgpu_free_resource() instead drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: expecting prototype for intel_alloc_vgpu_resource(). Prototype was for intel_vgpu_alloc_resource() instead drivers/gpu/drm/i915/gvt/cfg_space.c:257: warning: expecting prototype for intel_vgpu_emulate_cfg_read(). Prototype was for intel_vgpu_emulate_cfg_write() instead drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'vgpu' not described in 'intel_vgpu_dmabuf_obj' drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'info' not described in 'intel_vgpu_dmabuf_obj' drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'dmabuf_id' not described in 'intel_vgpu_dmabuf_obj' drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'kref' not described in 'intel_vgpu_dmabuf_obj' drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'initref' not described in 'intel_vgpu_dmabuf_obj' drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'list' not described in 'intel_vgpu_dmabuf_obj' drivers/gpu/drm/i915/gvt/handlers.c:3066: warning: expecting prototype for intel_t_default_mmio_write(). Prototype was for intel_vgpu_default_mmio_write() instead drivers/gpu/drm/i915/gvt/mmio_context.c:560: warning: expecting prototype for intel_gvt_switch_render_mmio(). Prototype was for intel_gvt_switch_mmio() instead drivers/gpu/drm/i915/gvt/page_track.c:131: warning: expecting prototype for intel_vgpu_enable_page_track(). Prototype was for intel_vgpu_disable_page_track() instead drivers/gpu/drm/i915/gvt/vgpu.c:215: warning: expecting prototype for intel_gvt_active_vgpu(). Prototype was for intel_gvt_activate_vgpu() instead drivers/gpu/drm/i915/gvt/vgpu.c:230: warning: expecting prototype for intel_gvt_deactive_vgpu(). Prototype was for intel_gvt_deactivate_vgpu() instead drivers/gpu/drm/i915/gvt/vgpu.c:358: warning: expecting prototype for intel_gvt_destroy_vgpu(). Prototype was for intel_gvt_destroy_idle_vgpu() instead Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a gvt_vgpu_err error message. Fix it. Fixes: 695fbc08 ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err") Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
- 08 Nov, 2022 4 commits
-
-
Jiapeng Chong authored
Fix the following W=1 kernel warnings: drivers/gpu/drm/i915/gvt/aperture_gm.c:308: warning: expecting prototype for inte_gvt_free_vgpu_resource(). Prototype was for intel_vgpu_free_resource() instead. drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: expecting prototype for intel_alloc_vgpu_resource(). Prototype was for intel_vgpu_alloc_resource() instead. Reported-by:
-
Jiapeng Chong authored
Fix the following W=1 kernel warnings: drivers/gpu/drm/i915/gvt/mmio_context.c:560: warning: expecting prototype for intel_gvt_switch_render_mmio(). Prototype was for intel_gvt_switch_mmio() instead. Reported-by:
-
Jiapeng Chong authored
Fix the following W=1 kernel warnings: drivers/gpu/drm/i915/gvt/handlers.c:3066: warning: expecting prototype for intel_t_default_mmio_write(). Prototype was for intel_vgpu_default_mmio_write() instead. Reported-by:
-
Julia Lawall authored
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
- 28 Oct, 2022 8 commits
-
-
Ville Syrjälä authored
Correctly indicate which outputs we support in the debug print. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-9-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Avoid having to call the output init function for each output type separately. We can just call the right one based on the "class" of the output. Technically we could just walk the bits of the bitmask but that could change the order in which we initialize the outputs. To avoid any behavioural changes keep to the same explicit probe order as before. Signed-off-by:
-
Ville Syrjälä authored
Get rid of this silly output type<->device index back and forth and just pass the output type directly to the corresponding output init function. This was already being done for TV outputs anyway. Signed-off-by:
-
Ville Syrjälä authored
Stop enumerating the DDC modes for SDVO LVDS outputs (outside the initial fixed mode setup). intel_panel_mode_valid() will just reject most of them anyway, and any left over are entirely pointless as they'll match the fixed mode hdisp+vdisp+vrefresh so no user visible effect from using them instead of the fixed mode. Signed-off-by:
-
Ville Syrjälä authored
Get rid of this funny byte based dumping of invalid output flags and just dump it as a single hex numbers. Also do that early since all the rest is going to get skipped anyway of the thing is zero. Signed-off-by:
-
Ville Syrjälä authored
drm_mode_probed_add() is unhappy about being called w/o mode_config.mutex. Grab it during LVDS fixed mode setup to silence the WARNs. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7301 Fixes: aa2b8807 ("drm/i915/sdvo: Fix multi function encoder stuff") Signed-off-by:
-
Ville Syrjälä authored
Call intel_sdvo_select_ddc_bus() before initializing any of the outputs. And before that is functional (assuming no VBT) we have to set up the controlled_outputs thing. Otherwise DDC won't be functional during the output init but LVDS really needs it for the fixed mode setup. Note that the whole multi output support still looks very bogus, and more work will be needed to make it correct. But for now this should at least fix the LVDS EDID fixed mode setup. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7301 Fixes: aa2b8807 ("drm/i915/sdvo: Fix multi function encoder stuff") Signed-off-by:
-
Ville Syrjälä authored
We try to filter out the corresponding xxx1 output if the xxx0 output is not present. But the way that is being done is pretty awkward. Make it less so. Cc: stable@vger.kernel.org Signed-off-by:
-
- 27 Oct, 2022 15 commits
-
-
Ville Syrjälä authored
Pull the SDVO audio state computation into a helper. This is almost identical to intel_hdmi_has_audio(), except the sink capabilities are stored under intel_sdvo rather than intel_hdmi. Might be nice to get rid of this duplication eventually... Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
The spec tells us to do a bunch of vblank waits in the audio enable/disable sequences. Make it so. The FIXMEs are nonsense since we do the audio disable very early and enable very late, so vblank interrupts are in fact enabled when we do this. TODO not sure we actually want these since we don't even rely on the hw ELD buffer, and these might be there just to give the audio side a bit of time to respond to the unsol events. OTOH they might be really needed for some other reason. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Acked-by:
-
Ville Syrjälä authored
On the older platforms the audio presence detect bit is in the port register, so it gets written outside audio codec hooks and is this separate from the ELD valid toggling. Split the operations into two steps on hsw+ to be more consistent with both the other platforms and the spec. Also according to the spec we might need some vblank waits between the two which definitely needs them done separately. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
The audio code does a lot of RMW accesses. Utilize intel_de_rmw() to make that a bit less tedious. There are still some hand rolled RMW left, but those have a lot of code in between the read and write to calculate the new value, so would need some refactoring first. v2: Add parens around the ?: to satisfy the robot Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
Make the eld pointer u32* so we don't have to do super ugly casting in the code itself. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
Currently we only write as many dwords into the hardware ELD buffers as drm_eld_size() tells us. That could mean the remainder of the hardware buffer is left with whatever stale garbage it had before, which doesn't seem entirely great. Let's zero out the remainder of the buffer in case the provided ELD doesn't fill it fully. We can also sanity check out idea of the hardware ELD buffer's size by making sure the address wrapped back to zero once we wrote the entire buffer. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
We currently read the ELD buffer size from hardware on g4x, but on ilk+ we just hardcode it to 84 bytes. Let's unify this and just do the hardware readout on all platforms, in case the size changes in the future or something. TODO: should perhaps do the readout during driver init and stash the results somewhere so that we could check that the connector's ELD actually fits and not even try to enable audio in that case... v2: Document the size is in dwords (Jani) Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
No idea why we do this ELD comparions on g4x before loading the new ELD. Seems entirely pointless so just get rid of it. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
On the "ilk" platforms AUD_CNTL_ST2 is a singleton. Protect it with the audio mutex in case we ever want to do parallel RMW access to it. Currently that should not happen since we only do audio enable/disable from full modesets, and those are fully serialized. But we probably want to think about toggling audio on/off from fastsets too. The hsw codepaths already have the same locking. g4x should not need it since it can only do audio to a single port at a time, which means it's actually broken in more ways than this atm. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
Rename a few g4x bits to match the ibx+ bits. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
Switch the audio registers to REG_BIT() & co. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
The "ilk" audio codec codepaths have some duplicated code to figure out the correct registers to use on each platform. Extrat that into a single place. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
We don't use the audio code on crestline (CL) since it doesn't support native HDMI output, and SDVO has it's own way of doing audio. And Bearlake-C (BLC) doesn't even exist in the real world, so no point it trying to deal with it. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
Remove some leftovers I missed in commit 2dd43144 ("drm/i915: Streamline the artihmetic") Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Ville Syrjälä authored
Rename the 'dev_priv' variables to 'i915' in the audio code to match modern style conventions. v2: Drop some needless braces in intel_audio_hooks_init() Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
- 26 Oct, 2022 7 commits
-
-
Anusha Srivatsa authored
No functional change. Introduce dg2_cdclk_squash_program and move squash_ctl register programming bits to this. v2: s/dg2_cdclk_squash_programming/dg2_cdclk_squash_program (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221025223042.138810-4-anusha.srivatsa@intel.com
-
Anusha Srivatsa authored
No functional change. Moving segments out to simplify bxt_set_cdlck() v2: s/bxt_cdclk_pll/bxt_cdclk_pll_update (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Driver had discrepancy in how cdclk squash and crawl support were checked. Like crawl, add squash as a 1 bit feature flag to the display section of DG2. Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Anusha Srivatsa authored
No functional changes. Changing terminology in some print statements. s/has_cdclk_squasher/has_cdclk_squash, s/crawler/crawl and s/squasher/squash. Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
Not all Dekel PHY registers have a lane instance, so having to specify this when using them is awkward. It makes more sense to define each PHY register with its full internal PHY offset where bits 15:12 is the lane for lane-instanced PHY registers and just a register bank index for other PHY registers. This way lane-instanced registers can be referred to with the (tc_port, lane) parameters, while other registers just with a tc_port parameter. An additional benefit of this change is to prevent passing a Dekel register to a generic MMIO access function or vice versa. v2: - Fix parameter reuse in the DKL_REG_MMIO definition. v3: - Rebase on latest patchset version. Cc: Jani Nikula <jani.nikula@intel.com> Acked-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221025114457.2191004-3-imre.deak@intel.com
-
Imre Deak authored
Move the TypeC DKL PHY register definitions to intel_dkl_phy_regs.h. No functional changes. v2: - Move the definitions to a new intel_dkl_phy_regs.h file. (Jani). v3: - Rebase on latest patchset version. Cc: Jani Nikula <jani.nikula@intel.com> Acked-by:
-
Imre Deak authored
An upcoming patch moves the DKL PHY register definitions to intel_dkl_phy_regs.h, so for consistency rename intel_tc_phy_regs.h containing only MG PHY register definitions to intel_mg_phy_regs.h. Suggested-by:
-
