- 29 Jan, 2020 40 commits
-
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 22dad713 upstream. The set uadt functions assume lineno is never NULL, but it is in case of ip_set_utest(). syzkaller managed to generate a netlink message that calls this with LINENO attr present: general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:hash_mac4_uadt+0x1bc/0x470 net/netfilter/ipset/ip_set_hash_mac.c:104 Call Trace: ip_set_utest+0x55b/0x890 net/netfilter/ipset/ip_set_core.c:1867 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 nfnetlink_rcv+0x1ba/0x460 net/netfilter/nfnetlink.c:563 pass a dummy lineno storage, its easier than patching all set implementations. This seems to be a day-0 bug. Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Reported-by: syzbot+34bd2369d38707f3f4a7@syzkaller.appspotmail.com Fixes: a7b4f989 ("netfilter: ipset: IP set core support") Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 1b789577 upstream. We get crash when the targets checkentry function tries to make use of the network namespace pointer for arptables. When the net pointer got added back in 2010, only ip/ip6/ebtables were changed to initialize it, so arptables has this set to NULL. This isn't a problem for normal arptables because no existing arptables target has a checkentry function that makes use of par->net. However, direct users of the setsockopt interface can provide any target they want as long as its registered for ARP or UNPSEC protocols. syzkaller managed to send a semi-valid arptables rule for RATEEST target which is enough to trigger NULL deref: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: xt_rateest_tg_checkentry+0x11d/0xb40 net/netfilter/xt_RATEEST.c:109 [..] xt_check_target+0x283/0x690 net/netfilter/x_tables.c:1019 check_target net/ipv4/netfilter/arp_tables.c:399 [inline] find_check_entry net/ipv4/netfilter/arp_tables.c:422 [inline] translate_table+0x1005/0x1d70 net/ipv4/netfilter/arp_tables.c:572 do_replace net/ipv4/netfilter/arp_tables.c:977 [inline] do_arpt_set_ctl+0x310/0x640 net/ipv4/netfilter/arp_tables.c:1456 Fixes: add67461 ("netfilter: add struct net * to target parameters") Reported-by: syzbot+d7358a458d8a81aee898@syzkaller.appspotmail.com Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 2548288b upstream. It turns out that even though endpoints with a maxpacket length of 0 aren't useful for data transfer, the descriptors do serve other purposes. In particular, skipping them will also skip over other class-specific descriptors for classes such as UVC. This unexpected side effect has caused some UVC cameras to stop working. In addition, the USB spec requires that when isochronous endpoint descriptors are present in an interface's altsetting 0 (which is true on some devices), the maxpacket size _must_ be set to 0. Warning about such things seems like a bad idea. This patch updates an earlier commit which would log a warning and skip these endpoint descriptors. Now we only log a warning, and we don't even do that for isochronous endpoints in altsetting 0. We don't need to worry about preventing endpoints with maxpacket = 0 from ever being used for data transfers; usb_submit_urb() already checks for this. Reported-and-tested-by:
Roger Whittaker <Roger.Whittaker@suse.com> Fixes: d482c7bb ("USB: Skip endpoints with 0 maxpacket length") Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://marc.info/?l=linux-usb&m=157790377329882&w=2 Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2001061040270.1514-100000@iolanthe.rowland.orgSigned-off-by:
-
Navid Emamdoost authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit a2cdd074 upstream. In rtl8xxxu_submit_int_urb if usb_submit_urb fails the allocated urb should be released. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by:
Chris Chiu <chiu@endlessm.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Navid Emamdoost authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 0e62395d upstream. In bfad_im_get_stats if bfa_port_get_stats fails, allocated memory needs to be released. Link: https://lore.kernel.org/r/20190910234417.22151-1-navid.emamdoost@gmail.comSigned-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Navid Emamdoost authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit db8fd2cd upstream. In mwifiex_pcie_alloc_cmdrsp_buf, a new skb is allocated which should be released if mwifiex_map_pci_memory() fails. The release is added. Fixes: fc331460 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe") Signed-off-by:
Ganapathi Bhat <gbhat@marvell.com> Signed-off-by:
-
Sudip Mukherjee authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 273f6329 upstream. If the serial device is disconnected and reconnected, it re-enumerates properly but does not link it. fwiw, linking means just saving the port index, so allow it always as there is no harm in saving the same value again even if it tries to relink with the same port. Fixes: fb2b9001 ("tty: link tty and port before configuring it as console") Reported-by:
Kenneth R. Crudup <kenny@panix.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191227174434.12057-1-sudipm.mukherjee@gmail.comSigned-off-by:
-
Sudip Mukherjee authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit fb2b9001 upstream. There seems to be a race condition in tty drivers and I could see on many boot cycles a NULL pointer dereference as tty_init_dev() tries to do 'tty->port->itty = tty' even though tty->port is NULL. 'tty->port' will be set by the driver and if the driver has not yet done it before we open the tty device we can get to this situation. By adding some extra debug prints, I noticed that: 6.650130: uart_add_one_port 6.663849: register_console 6.664846: tty_open 6.674391: tty_init_dev 6.675456: tty_port_link_device uart_add_one_port() registers the console, as soon as it registers, the userspace tries to use it and that leads to tty_open() but uart_add_one_port() has not yet done tty_port_link_device() and so tty->port is not yet configured when control reaches tty_init_dev(). Further look into the code and tty_port_link_device() is done by uart_add_one_port(). After registering the console uart_add_one_port() will call tty_port_register_device_attr_serdev() and tty_port_link_device() is called from this. Call add tty_port_link_device() before uart_configure_port() is done and add a check in tty_port_link_device() so that it only links the port if it has not been done yet. Suggested-by:
Jiri Slaby <jslaby@suse.com> Signed-off-by:
-
Michael Straube authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 58dcc5bf upstream. This device was added to the stand-alone driver on github. Add it to the staging driver as well. Link: https://github.com/lwfinger/rtl8188eu/commit/b9b537aa25a8Signed-off-by:
Michael Straube <straube.linux@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191228143725.24455-1-straube.linux@gmail.comSigned-off-by:
-
Paul Cercueil authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit c80d0f44 upstream. The IRQ handler was passed a pointer to a struct dma_controller, but the argument was then casted to a pointer to a struct musb_dma_controller. Fixes: 427c4f33 ("usb: struct device - replace bus_id with dev_name(), dev_set_name()") Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Tested-by:
Artur Rojek <contact@artur-rojek.eu> Cc: stable@vger.kernel.org Signed-off-by:
Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20191216161844.772-2-b-liu@ti.comSigned-off-by:
-
Paul Cercueil authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 96a0c128 upstream. The pullup may be already enabled before the driver is initialized. This happens for instance on JZ4740. It has to be disabled at init time, as we cannot guarantee that a gadget driver will be bound to the UDC. Signed-off-by:
-
Daniele Palmas authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 2438c3a1 upstream. Telit FN980 flashing device 0x1bc7/0x9010 requires zero packet to be sent if out data size is is equal to the endpoint max size. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> [ johan: switch operands in conditional ] Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Malcolm Priestley authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit c0bcf9f3 upstream. intfdata will contain stale pointer when the device is detached after failed initialization when referenced in vt6656_disconnect Provide driver access to it here and NULL it. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/6de448d7-d833-ef2e-dd7b-3ef9992fee0e@gmail.comSigned-off-by:
-
Oliver Hartkopp authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit e7153bf7 upstream. KMSAN sysbot detected a read access to an untinitialized value in the headroom of an outgoing CAN related sk_buff. When using CAN sockets this area is filled appropriately - but when using a packet socket this initialization is missing. The problematic read access occurs in the CAN receive path which can only be triggered when the sk_buff is sent through a (virtual) CAN interface. So we check in the sending path whether we need to perform the missing initializations. Fixes: d3b58c47 ("can: replace timestamp as unique skb attribute") Reported-by: syzbot+b02ff0707a97e4e79ebb@syzkaller.appspotmail.com Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Florian Faber authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 2d77bd61 upstream. Under load, the RX side of the mscan driver can get stuck while TX still works. Restarting the interface locks up the system. This behaviour could be reproduced reliably on a MPC5121e based system. The patch fixes the return value of the NAPI polling function (should be the number of processed packets, not constant 1) and the condition under which IRQs are enabled again after polling is finished. With this patch, no more lockups were observed over a test period of ten days. Fixes: afa17a50 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by:
Florian Faber <faber@faberman.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 2f361cd9 upstream. Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by:
-
Wayne Lin authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit c4e4fccc upstream. [Why] According to DP spec, it should shift left 4 digits for NO_STOP_BIT in REMOTE_I2C_READ message. Not 5 digits. In current code, NO_STOP_BIT is always set to zero which means I2C master is always generating a I2C stop at the end of each I2C write transaction while handling REMOTE_I2C_READ sideband message. This issue might have the generated I2C signal not meeting the requirement. Take random read in I2C for instance, I2C master should generate a repeat start to start to read data after writing the read address. This issue will cause the I2C master to generate a stop-start rather than a re-start which is not expected in I2C random read. [How] Correct the shifting value of NO_STOP_BIT for DP_REMOTE_I2C_READ case in drm_dp_encode_sideband_req(). Changes since v1:(https://patchwork.kernel.org/patch/11312667/) * Add more descriptions in commit and cc to stable Fixes: ad7f8a1f ("drm/helper: add Displayport multi-stream helper (v0.6)") Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Wayne Lin <Wayne.Lin@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200103055001.10287-1-Wayne.Lin@amd.comSigned-off-by:
-
Dmitry Torokhov authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit cb222aed upstream. If we happen to have a garbage in input device's keycode table with values too big we'll end up doing clear_bit() with offset way outside of our bitmaps, damaging other objects within an input device or even outside of it. Let's add sanity checks to the returned old keycodes. Reported-by: syzbot+c769968809f9359b07aa@syzkaller.appspotmail.com Reported-by: syzbot+76f3a30e88d256644c78@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20191207212757.GA245964@dtor-wsSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 4f388217 upstream. We should not be leaving half-mapped usages with potentially invalid keycodes, as that may confuse hidinput_find_key() when the key is located by index, which may end up feeding way too large keycode into the VT keyboard handler and cause OOB write there: BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline] BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline] BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495 Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722 ... kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline] kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495 input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118 input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145 input_pass_values drivers/input/input.c:949 [inline] input_set_keycode+0x290/0x320 drivers/input/input.c:954 evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882 evdev_do_ioctl drivers/input/evdev.c:1150 [inline] Cc: stable@vger.kernel.org Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Marcel Holtmann authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit be54e746 upstream. Always return EPOLLOUT from uhid_char_poll to allow polling /dev/uhid for writable state. Fixes: 1f9dec1e ("HID: uhid: allow poll()'ing on uhid devices") Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 8ec321e9 upstream. The syzbot fuzzer found a slab-out-of-bounds bug in the HID report handler. The bug was caused by a report descriptor which included a field with size 12 bits and count 4899, for a total size of 7349 bytes. The usbhid driver uses at most a single-page 4-KB buffer for reports. In the test there wasn't any problem about overflowing the buffer, since only one byte was received from the device. Rather, the bug occurred when the HID core tried to extract the data from the report fields, which caused it to try reading data beyond the end of the allocated buffer. This patch fixes the problem by rejecting any report whose total length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow for a possible report index). In theory a device could have a report longer than that, but if there was such a thing we wouldn't handle it correctly anyway. Reported-and-tested-by: syzbot+09ef48aa58261464b621@syzkaller.appspotmail.com Signed-off-by:
-
Steven Rostedt (VMware) authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit b8299d36 upstream. On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and this makes the stack tracer fail to compile. Just define it to zero in this case. Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com Cc: stable@vger.kernel.org Fixes: 4df29712 ("tracing: Remove most or all of stack tracer stack size from stack_max_size") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Kaitao Cheng authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 50f9ad60 upstream. In the function, if register_trace_sched_migrate_task() returns error, sched_switch/sched_wakeup_new/sched_wakeup won't unregister. That is why fail_deprobe_sched_switch was added. Link: http://lkml.kernel.org/r/20191231133530.2794-1-pilgrimtao@gmail.com Cc: stable@vger.kernel.org Fixes: 478142c3 ("tracing: do not grab lock in wakeup latency function tracing") Signed-off-by:
Kaitao Cheng <pilgrimtao@gmail.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 51d4efab upstream. Bose Companion 5 (with USB ID 05a7:1020) doesn't seem supporting reading back the sample rate, so the existing quirk is needed. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206063 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200104110936.14288-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit c1ffba30 upstream. On shutdown, ehci_power_off() is called unconditionally to power off each port, even if it was never called to power on the port. For chipidea, this results in a call to ehci_ci_portpower() with a request to power off ports even if the port was never powered on. This results in the following warning from the regulator code. WARNING: CPU: 0 PID: 182 at drivers/regulator/core.c:2596 _regulator_disable+0x1a8/0x210 unbalanced disables for usb_otg2_vbus Modules linked in: CPU: 0 PID: 182 Comm: init Not tainted 5.4.6 #1 Hardware name: Freescale i.MX7 Dual (Device Tree) [<c0313658>] (unwind_backtrace) from [<c030d698>] (show_stack+0x10/0x14) [<c030d698>] (show_stack) from [<c1133afc>] (dump_stack+0xe0/0x10c) [<c1133afc>] (dump_stack) from [<c0349098>] (__warn+0xf4/0x10c) [<c0349098>] (__warn) from [<c0349128>] (warn_slowpath_fmt+0x78/0xbc) [<c0349128>] (warn_slowpath_fmt) from [<c09f36ac>] (_regulator_disable+0x1a8/0x210) [<c09f36ac>] (_regulator_disable) from [<c09f374c>] (regulator_disable+0x38/0xe8) [<c09f374c>] (regulator_disable) from [<c0df7bac>] (ehci_ci_portpower+0x38/0xdc) [<c0df7bac>] (ehci_ci_portpower) from [<c0db4fa4>] (ehci_port_power+0x50/0xa4) [<c0db4fa4>] (ehci_port_power) from [<c0db5420>] (ehci_silence_controller+0x5c/0xc4) [<c0db5420>] (ehci_silence_controller) from [<c0db7644>] (ehci_stop+0x3c/0xcc) [<c0db7644>] (ehci_stop) from [<c0d5bdc4>] (usb_remove_hcd+0xe0/0x19c) [<c0d5bdc4>] (usb_remove_hcd) from [<c0df7638>] (host_stop+0x38/0xa8) [<c0df7638>] (host_stop) from [<c0df2f34>] (ci_hdrc_remove+0x44/0xe4) ... Keeping track of the power enable state avoids the warning and traceback. Fixes: c8679a2f ("usb: chipidea: host: add portpower override") Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Peter Chen <peter.chen@freescale.com> Cc: stable@vger.kernel.org Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191226155754.25451-1-linux@roeck-us.netSigned-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1859865 commit 68faa679 upstream. 'chrdev_open()' calls 'cdev_get()' to obtain a reference to the 'struct cdev *' stashed in the 'i_cdev' field of the target inode structure. If the pointer is NULL, then it is initialised lazily by looking up the kobject in the 'cdev_map' and so the whole procedure is protected by the 'cdev_lock' spinlock to serialise initialisation of the shared pointer. Unfortunately, it is possible for the initialising thread to fail *after* installing the new pointer, for example if the subsequent '->open()' call on the file fails. In this case, 'cdev_put()' is called, the reference count on the kobject is dropped and, if nobody else has taken a reference, the release function is called which finally clears 'inode->i_cdev' from 'cdev_purge()' before potentially freeing the object. The problem here is that a racing thread can happily take the 'cdev_lock' and see the non-NULL pointer in the inode, which can result in a refcount increment from zero and a warning: | ------------[ cut here ]------------ | refcount_t: addition on 0; use-after-free. | WARNING: CPU: 2 PID: 6385 at lib/refcount.c:25 refcount_warn_saturate+0x6d/0xf0 | Modules linked in: | CPU: 2 PID: 6385 Comm: repro Not tainted 5.5.0-rc2+ #22 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 | RIP: 0010:refcount_warn_saturate+0x6d/0xf0 | Code: 05 55 9a 15 01 01 e8 9d aa c8 ff 0f 0b c3 80 3d 45 9a 15 01 00 75 ce 48 c7 c7 00 9c 62 b3 c6 08 | RSP: 0018:ffffb524c1b9bc70 EFLAGS: 00010282 | RAX: 0000000000000000 RBX: ffff9e9da1f71390 RCX: 0000000000000000 | RDX: ffff9e9dbbd27618 RSI: ffff9e9dbbd18798 RDI: ffff9e9dbbd18798 | RBP: 0000000000000000 R08: 000000000000095f R09: 0000000000000039 | R10: 0000000000000000 R11: ffffb524c1b9bb20 R12: ffff9e9da1e8c700 | R13: ffffffffb25ee8b0 R14: 0000000000000000 R15: ffff9e9da1e8c700 | FS: 00007f3b87d26700(0000) GS:ffff9e9dbbd00000(0000) knlGS:0000000000000000 | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 | CR2: 00007fc16909c000 CR3: 000000012df9c000 CR4: 00000000000006e0 | DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 | DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 | Call Trace: | kobject_get+0x5c/0x60 | cdev_get+0x2b/0x60 | chrdev_open+0x55/0x220 | ? cdev_put.part.3+0x20/0x20 | do_dentry_open+0x13a/0x390 | path_openat+0x2c8/0x1470 | do_filp_open+0x93/0x100 | ? selinux_file_ioctl+0x17f/0x220 | do_sys_open+0x186/0x220 | do_syscall_64+0x48/0x150 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 | RIP: 0033:0x7f3b87efcd0e | Code: 89 54 24 08 e8 a3 f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f4 | RSP: 002b:00007f3b87d259f0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 | RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b87efcd0e | RDX: 0000000000000000 RSI: 00007f3b87d25a80 RDI: 00000000ffffff9c | RBP: 00007f3b87d25e90 R08: 0000000000000000 R09: 0000000000000000 | R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe188f504e | R13: 00007ffe188f504f R14: 00007f3b87d26700 R15: 0000000000000000 | ---[ end trace 24f53ca58db8180a ]--- Since 'cdev_get()' can already fail to obtain a reference, simply move it over to use 'kobject_get_unless_zero()' instead of 'kobject_get()', which will cause the racing thread to return -ENXIO if the initialising thread fails unexpectedly. Cc: Hillf Danton <hdanton@sina.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Reported-by: syzbot+82defefbbd8527e1c2cb@syzkaller.appspotmail.com Signed-off-by:
Will Deacon <will@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191219120203.32691-1-will@kernel.orgSigned-off-by:
-
Connor Kuehl authored
BugLink: https://bugs.launchpad.net/bugs/1859640 Ignore: yes Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1859640Signed-off-by:
-
Daniele Palmas authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 0d3010fa upstream. This patch adds the following Telit ME910G1 composition: 0x110a: tty, tty, tty, rmnet Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 3e4f8e21 upstream. Amend the endpoint-descriptor sanity checks to detect all duplicate endpoint addresses in a configuration. Commit 0a8fd134 ("USB: fix problems with duplicate endpoint addresses") added a check for duplicate endpoint addresses within a single alternate setting, but did not look for duplicate addresses in other interfaces. The current check would also not detect all duplicate addresses when one endpoint is as a (bi-directional) control endpoint. This specifically avoids overwriting the endpoint entries in struct usb_device when enabling a duplicate endpoint, something which could potentially lead to crashes or leaks, for example, when endpoints are later disabled. Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 96cc4b69 ] Use of eth_hdr() in tx path is error prone. Many drivers call skb_reset_mac_header() before using it, but others do not. Commit 6d1ccff6 ("net: reset mac header in dev_start_xmit()") attempted to fix this generically, but commit d346a3fa ("packet: introduce PACKET_QDISC_BYPASS socket option") brought back the macvlan bug. Lets add a new helper, so that tx paths no longer have to call skb_reset_mac_header() only to get a pointer to skb->data. Hopefully we will be able to revert 6d1ccff6 ("net: reset mac header in dev_start_xmit()") and save few cycles in transmit fast path. BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline] BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579 CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] mc_hash drivers/net/macvlan.c:251 [inline] macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline] macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559 __netdev_start_xmit include/linux/netdevice.h:4447 [inline] netdev_start_xmit include/linux/netdevice.h:4461 [inline] dev_direct_xmit+0x419/0x630 net/core/dev.c:4079 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240 packet_snd net/packet/af_packet.c:2966 [inline] packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 __sys_sendto+0x262/0x380 net/socket.c:1985 __do_sys_sendto net/socket.c:1997 [inline] __se_sys_sendto net/socket.c:1993 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x442639 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639 RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x163/0x770 mm/slab.c:3665 kmalloc include/linux/slab.h:561 [inline] tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a4932000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 1025 bytes inside of 4096-byte region [ffff8880a4932000, ffff8880a4933000) The buggy address belongs to the page: page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0 raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000 raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: b863ceb7 ("[NET]: Add macvlan driver") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hangbin Liu authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 71130f29 ] Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter tos value by RT_TOS() instead of using config tos directly. vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS() directly in function ip_tunnel_ecn_encap(). Fixes: 206aaafc ("VXLAN: Use IP Tunnels tunnel ENC encap API") Fixes: 1400615d ("vxlan: allow setting ipv6 traffic class") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 9bbd917e ] There are few cases where the ndo_uninit() handler might be not called if an error happens while device is initialized. Since vlan_newlink() calls vlan_changelink() before trying to register the netdevice, we need to make sure vlan_dev_uninit() has been called at least once, or we might leak allocated memory. BUG: memory leak unreferenced object 0xffff888122a206c0 (size 32): comm "syz-executor511", pid 7124, jiffies 4294950399 (age 32.240s) hex dump (first 32 bytes): 00 00 00 00 00 00 61 73 00 00 00 00 00 00 00 00 ......as........ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000000eb3bb85>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<000000000eb3bb85>] slab_post_alloc_hook mm/slab.h:586 [inline] [<000000000eb3bb85>] slab_alloc mm/slab.c:3320 [inline] [<000000000eb3bb85>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549 [<000000007b99f620>] kmalloc include/linux/slab.h:556 [inline] [<000000007b99f620>] vlan_dev_set_egress_priority+0xcc/0x150 net/8021q/vlan_dev.c:194 [<000000007b0cb745>] vlan_changelink+0xd6/0x140 net/8021q/vlan_netlink.c:126 [<0000000065aba83a>] vlan_newlink+0x135/0x200 net/8021q/vlan_netlink.c:181 [<00000000fb5dd7a2>] __rtnl_newlink+0x89a/0xb80 net/core/rtnetlink.c:3305 [<00000000ae4273a1>] rtnl_newlink+0x4e/0x80 net/core/rtnetlink.c:3363 [<00000000decab39f>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424 [<00000000accba4ee>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<00000000319fe20f>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 [<00000000d51938dc>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000d51938dc>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328 [<00000000e539ac79>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917 [<000000006250c27e>] sock_sendmsg_nosec net/socket.c:639 [inline] [<000000006250c27e>] sock_sendmsg+0x54/0x70 net/socket.c:659 [<00000000e2a156d1>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330 [<000000008c87466e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384 [<00000000110e3054>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417 [<00000000d71077c8>] __do_sys_sendmsg net/socket.c:2426 [inline] [<00000000d71077c8>] __se_sys_sendmsg net/socket.c:2424 [inline] [<00000000d71077c8>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424 Fixe: 07b5b17e ("[VLAN]: Use rtnl_link API") Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit eb8ef2a3 ] Both vlan_dev_change_flags() and vlan_dev_set_egress_priority() can return an error. vlan_changelink() should not ignore them. Fixes: 07b5b17e ("[VLAN]: Use rtnl_link API") Signed-off-by:
-
Pengcheng Yang authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit c9655008 ] When we receive a D-SACK, where the sequence number satisfies: undo_marker <= start_seq < end_seq <= prior_snd_una we consider this is a valid D-SACK and tcp_is_sackblock_valid() returns true, then this D-SACK is discarded as "old stuff", but the variable first_sack_index is not marked as negative in tcp_sacktag_write_queue(). If this D-SACK also carries a SACK that needs to be processed (for example, the previous SACK segment was lost), this SACK will be treated as a D-SACK in the following processing of tcp_sacktag_write_queue(), which will eventually lead to incorrect updates of undo_retrans and reordering. Fixes: fd6dad61 ("[TCP]: Earlier SACK block verification & simplify access to them") Signed-off-by:
Pengcheng Yang <yangpc@wangsu.com> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit be7a7729 ] This patch is to fix a memleak caused by no place to free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq with an allocated chunk in cmd->obj.chunk. So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on the cmd seq when any cmd returns error. While at it, also remove 'nomem' label. Reported-by: syzbot+107c4aff5f392bf1517f@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit d9e15a27 ] As diagnosed by Florian : If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue() can loop forever in : if (f->credit <= 0) { f->credit += q->quantum; goto begin; } ... because f->credit is either 0 or -2147483648. Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 : This max value should limit risks of breaking user setups while fixing this bug. Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 47240ba0 ] If skb_linearize() fails, we need to free the skb. TSO makes skb bigger, and this bug might be the reason Raspberry Pi 3B+ users had to disable TSO. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
RENARD Pierre-Francois <pfrenard@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Signed-off-by:
-
Chen-Yu Tsai authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 52cc73e5 ] Allow all the RGMII modes to be used. This would allow us to represent the hardware better in the device tree with RGMII_ID where in most cases the PHY's internal delay for both RX and TX are used. Fixes: af0bd4e9 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Chan Shu Tak, Alex authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit af1c0e4e ] When a frame with NULL DSAP is received, llc_station_rcv is called. In turn, llc_stat_ev_rx_null_dsap_xid_c is called to check if it is a NULL XID frame. The return statement of llc_stat_ev_rx_null_dsap_xid_c returns 1 when the incoming frame is not a NULL XID frame and 0 otherwise. Hence, a NULL XID response is returned unexpectedly, e.g. when the incoming frame is a NULL TEST command. To fix the error, simply remove the conditional operator. A similar error in llc_stat_ev_rx_null_dsap_test_c is also fixed. Signed-off-by:
Chan Shu Tak, Alex <alexchan@task.com.hk> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
