- 08 Feb, 2009 40 commits
-
-
Tomi Valkeinen authored
Enabling clock in a disabled power domain causes the power domain to be turned on. However, the power transition is not always finished when clk_enable() returns and this randomly crashes the kernel when an interrupt happens right after the clk_enable, and the kernel tries to read the irq status register for that domain. Why the irq status register is inaccessible, I don't know. Also it doesn't seem to be related to the module being not powered up, but to the transition itself. The same could perhaps happen after clk_disable also, but I have not witnessed that. The problem affects at least dss, cam and sgx clocks. This change waits for the transition to be finished before returning from omap2_clkdm_clk_enable(). Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Paul Walmsley authored
The SGX device on OMAP3 does not support retention, so remove RET from the list of possible SGX power states. Problem debugged by Richard Woodruff <r-woodruff2@ti.com>. Signed-off-by:
Richard Woodruff <r-woodruff2@ti.com> Signed-off-by:
-
Paul Walmsley authored
Each DPLL exists in its own powerdomain (cf 34xx TRM figure 4-18) and clockdomain; so, create powerdomain and clockdomain structures for them. Mark each DPLL clock as belonging to their respective DPLL clockdomain. cf. 34xx TRM Table 4-27 (among other references). linux-omap source commits are acdb615850b9b4f7d1ab68133a16be8c8c0e7419 and a8798a48f33e9268dcc7f30a4b4a3ce4220fe0c9. Signed-off-by:
-
Paul Walmsley authored
sys_clkout2 belongs in the core_clkdm (3430 TRM section 4.7.2.2). It's not clear whether it actually is in the CORE clockdomain, or whether it is technically in a different clockdomain; but this is closer to reality than the present configuration. Signed-off-by:
-
Paul Walmsley authored
Add clockdomains for the CM and PRM. These will ultimately replace the "wkup_clkdm", which appears to not actually exist on the hardware. Signed-off-by:
-
Paul Walmsley authored
struct clockdomain contains a struct powerdomain *pwrdm and const char *pwrdm_name. The pwrdm_name is only used at initialization to look up the appropriate pwrdm pointer. Combining these into a union saves about 100 bytes on 3430SDP. This patch should not cause any change in kernel function. Updated to gracefully handle autodeps that contain invalid powerdomains, per Russell King's review comments. Boot-tested on BeagleBoard ES2.1. linux-omap source commit is 718fc6cd4db902aa2242a736cc3feb8744a4c71a. Signed-off-by:
-
Kevin Hilman authored
This patch adds a CPUfreq frequency-table implementation for OMAP2 by walking the PRCM rate-table for available entries and adding them to a CPUfreq table. CPUfreq can then be used to manage switching between all the available entries in the PRCM rate table. Either use the CPUfreq sysfs interface directly, (see Section 3 of Documentation/cpu-freq/user-guide.txt) or use the cpufrequtils package: http://www.kernel.org/pub/linux/utils/kernel/cpufreq/cpufrequtils.htmlSigned-off-by:
Kevin Hilman <khilman@mvista.com> Updated to try to use cpufreq_table if it exists. linux-omap source commit is 77ce544fa48deb7a2003f454624e3ca10d37ab87. Signed-off-by:
-
Paul Walmsley authored
Filling the set_rate and round_rate fields of dpll4_m4_ck makes this clock programmable through clk_set_rate(). This is needed to give omapfb control over the dss1_alwon_fck rate. This patch includes a fix from Tomi Valkeinen <tomi.valkeinen@nokia.com>. linux-omap source commits are e42218d45afbc3e654e289e021e6b80c657b16c2 and 9d211b761b3cdf7736602ecf7e68f8a298c13278. Signed-off-by:
Måns Rullgård <mans@mansr.com> Signed-off-by:
-
Sergio Aguirre authored
Add CSI2 clock struct for handling it with clock API when TI PM is disabled. linux-omap source commit is 8b20f4498928459276bd3366e3381ad595d23432. Signed-off-by:
Sergio Aguirre <saaguirre@ti.com> Acked-by:
-
Daniel Stone authored
The GFX/SGX functional and interface clocks have different masks, for some unknown reason, so split EN_SGX_SHIFT into one each for fclk and iclk. Correct according to the TRM and the far more important 'does this actually work at all?' metric. linux-omap source commit is de1121fdb899f762b9e717f44eaf3fae7c00cd3e. Signed-off-by:
Daniel Stone <daniel.stone@nokia.com> Signed-off-by:
-
Paul Walmsley authored
Fix some bugs in the OMAP3 clock tree pertaining to the 96MHz clocks. The 96MHz portion of the clock tree should now have reasonable fidelity to the 34xx TRM Rev I. One remaining question mark: it's not clear exactly which 96MHz source clock the USIM uses. This patch sticks with the previous setting, which seems reasonable. linux-omap source commit is 15c706e8179ce238c3ba70a25846a36b73bd2359. Signed-off-by:
-
Paul Walmsley authored
Remove usbhost_sar_fclk from the OMAP3 clock framework. The bit that the clock was tweaking doesn't actually enable or disable a clock; it controls whether the hardware will save and restore USBHOST state when the powerdomain changes state. (That happens to coincidentally enable a clock for the duration of the operation, hence the earlier confusion.) In place of the clock, mark the USBHOST powerdomain as supporting hardware save-and-restore functionality. linux-omap source commit is f3ceac86a9d425d101d606d87a5af44afef27179. Signed-off-by:
-
Paul Walmsley authored
This patch adds a missing OMAP24xx clock, the SSI L4 interface clock, as "ssi_l4_ick". linux-omap source commit is ace129d39b3107d330d4cf6934385d13521f2fec. Signed-off-by:
-
Paul Walmsley authored
Fix sparse & checkpatch warnings in OMAP2/3 PRCM & PM code. This mostly consists of: - converting pointer comparisons to integers in form similar to (ptr == 0) to the standard idiom (!ptr) - labeling a few non-static private functions as static - adding prototypes for *_init() functions in the appropriate header files, and getting rid of the corresponding open-coded extern prototypes in other C files - renaming the variable 'sclk' in mach-omap2/clock.c:omap2_get_apll_clkin to avoid shadowing an earlier declaration Clean up checkpatch issues. This mostly involves: - converting some asm/ includes to linux/ includes - cleaning up some whitespace - getting rid of braces for conditionals with single following statements Also take care of a few odds and ends, including: - getting rid of unlikely() and likely() - none of this code is particularly fast-path code, so the performance impact seems slim; and some of those likely() and unlikely() indicators are probably not as accurate as the ARM's branch predictor - removing some superfluous casts linux-omap source commit is 347df59f5d20fdf905afbc26b1328b0e28a8a01b. Signed-off-by:
-
Paul Walmsley authored
Add non-CORE DPLL rate set code and M,N programming for OMAP3. Connect it to OMAP34xx DPLLs 1, 2, 4, 5 via the clock framework. You may see some warnings on rate sets from the freqsel code. The table that TI presented in the 3430 TRM Rev F does not cover Fint < 750000, which definitely occurs in practice. However, the lack of this freqsel case does not appear to impair the DPLL rate change. linux-omap source commit is 689fe67c6d1ad8f52f7f7b139a3274b79bf3e784. Signed-off-by:
-
Russell King authored
... rather than the clock names themselves. Signed-off-by: -
Russell King authored
Signed-off-by: -
Russell King authored
Signed-off-by: -
Russell King authored
... which now means no driver requests the "armxor_ck" clock directly. Also, fix the error handling for clk_get(), ensuring that we propagate the error returned from clk_get(). Signed-off-by: -
Russell King authored
Signed-off-by: -
Russell King authored
By providing a dummy ick for OMAP1510 and OMAP310, we avoid having SoC conditional clock information in i2c-omap.c. Also, fix the error handling by making sure we propagate the error returned via clk_get(). Signed-off-by: -
Russell King authored
On OMAP1, the I2C functional clock (fck) is the armxor_ck, so there's no need to get "armxor_ck" separately. Signed-off-by: -
Russell King authored
Signed-off-by: -
Russell King authored
Rather than introducing a special 'mcbsp_clk' with code behind it in mach-omap*/mcbsp.c to handle the SoC specifics, arrange for the mcbsp driver to be like any other driver. mcbsp requests its fck and ick clocks directly, and the SoC specific code deals with selecting the correct clock. There is one oddity to deal with - OMAP1 fiddles with the DSP clocks and DSP reset, so we move this to the two callback functions. Signed-off-by: -
Russell King authored
... rather than the clock names themselves. Signed-off-by: -
Russell King authored
Eliminate the OMAP1 vs OMAP2 clock knowledge in the MMC driver. Signed-off-by: -
Russell King authored
Convert OMAP MMC driver to match clocks using the device ID and a connection ID rather than a clock name. This allows us to eliminate the OMAP1/OMAP2 differences for the function clock. Signed-off-by: -
Russell King authored
Eliminate the OMAP1 vs OMAP2 clock knowledge in the watchdog driver. Signed-off-by: -
Russell King authored
This eliminates the need for separate OMAP24xx and OMAP34xx clock requesting code sections. Signed-off-by: -
Russell King authored
By providing a dummy clock node, we can eliminate the SoC conditional clock handing in the OMAP drivers, moving this knowledge out of the driver and into the machine clock support code. Signed-off-by: -
Russell King authored
Signed-off-by: -
Russell King authored
Signed-off-by: -
Russell King authored
Signed-off-by: -
Russell King authored
Signed-off-by: -
Russell King authored
This stops things blowing up if a 'struct clk' to be passed more than once to clk_register(), which will be required when we decouple struct clk's from their names. Signed-off-by: -
Russell King authored
This is needed to use these with the clkdev helpers. Signed-off-by: -
Russell King authored
It makes no sense to have the CKCTL rate selection implemented as a flag and a special exception in the top level set_rate/round_rate methods. Provide CKCTL set_rate/round_rate methods, and use these for where ever RATE_CKCTL is used and they're not already overridden. This allows us to remove the RATE_CKCTL flag. Signed-off-by: -
Russell King authored
propagate_rate() is recursive, so it makes sense to minimise the amount of stack which is used for each recursion. So, rather than recursing back into it from the ->recalc functions if RATE_PROPAGATES is set, do that test at the higher level. Signed-off-by: -
Russell King authored
We've always called propagate_rate() in the parent function to the .set_rate methods, so there's no point having the .set_rate methods also call this heavy-weight function - it's mere duplication of what's happening elsewhere. Signed-off-by: -
Russell King authored
Move the clock propagation calls for set_parent and set_rate into the core omap clock code, rather than having these calls scattered throughout the OMAP1 and OMAP2 implementations. Signed-off-by:
-
