- 10 Mar, 2021 21 commits
-
-
Pavel Andrianov authored
pxa168_eth_remove() firstly calls unregister_netdev(), then cancels a timeout work. unregister_netdev() shuts down a device interface and removes it from the kernel tables. If the timeout occurs in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop and open of the device. It may lead to an inconsistent state and memory leaks. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Pavel Andrianov <andrianov@ispras.ru> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
macvlan_count_rx() can be called from process context, it is thus necessary to disable preemption before calling u64_stats_update_begin() syzbot was able to spot this on 32bit arch: WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert include/linux/seqlock.h:271 [inline] WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269 Modules linked in: Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 4632 Comm: kworker/1:3 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: ARM-Versatile Express Workqueue: events macvlan_process_broadcast Backtrace: [<82740468>] (dump_backtrace) from [<827406dc>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252) r7:00000080 r6:60000093 r5:00000000 r4:8422a3c4 [<827406c4>] (show_stack) from [<82751b58>] (__dump_stack lib/dump_stack.c:79 [inline]) [<827406c4>] (show_stack) from [<82751b58>] (dump_stack+0xb8/0xe8 lib/dump_stack.c:120) [<82751aa0>] (dump_stack) from [<82741270>] (panic+0x130/0x378 kernel/panic.c:231) r7:830209b4 r6:84069ea4 r5:00000000 r4:844350d0 [<82741140>] (panic) from [<80244924>] (__warn+0xb0/0x164 kernel/panic.c:605) r3:8404ec8c r2:00000000 r1:00000000 r0:830209b4 r7:0000010f [<80244874>] (__warn) from [<82741520>] (warn_slowpath_fmt+0x68/0xd4 kernel/panic.c:628) r7:81363f70 r6:0000010f r5:83018e50 r4:00000000 [<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert include/linux/seqlock.h:271 [inline]) [<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269) r8:5a109000 r7:0000000f r6:a568dac0 r5:89802300 r4:00000001 [<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (u64_stats_update_begin include/linux/u64_stats_sync.h:128 [inline]) [<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_count_rx include/linux/if_macvlan.h:47 [inline]) [<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_broadcast+0x154/0x26c drivers/net/macvlan.c:291) r5:89802300 r4:8a927740 [<8136499c>] (macvlan_broadcast) from [<81365020>] (macvlan_process_broadcast+0x258/0x2d0 drivers/net/macvlan.c:317) r10:81364f78 r9:8a86d000 r8:8a9c7e7c r7:8413aa5c r6:00000000 r5:00000000 r4:89802840 [<81364dc8>] (macvlan_process_broadcast) from [<802696a4>] (process_one_work+0x2d4/0x998 kernel/workqueue.c:2275) r10:00000008 r9:8404ec98 r8:84367a02 r7:ddfe6400 r6:ddfe2d40 r5:898dac80 r4:8a86d43c [<802693d0>] (process_one_work) from [<80269dcc>] (worker_thread+0x64/0x54c kernel/workqueue.c:2421) r10:00000008 r9:8a9c6000 r8:84006d00 r7:ddfe2d78 r6:898dac94 r5:ddfe2d40 r4:898dac80 [<80269d68>] (worker_thread) from [<80271f40>] (kthread+0x184/0x1a4 kernel/kthread.c:292) r10:85247e64 r9:898dac80 r8:80269d68 r7:00000000 r6:8a9c6000 r5:89a2ee40 r4:8a97bd00 [<80271dbc>] (kthread) from [<80200114>] (ret_from_fork+0x14/0x20 arch/arm/kernel/entry-common.S:158) Exception stack(0x8a9c7fb0 to 0x8a9c7ff8) Fixes: 412ca155 ("macvlan: Move broadcasts into a work queue") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ido Schimmel authored
In the rare case that drop_monitor fails to register its probe on the 'napi_poll' tracepoint, it will not deactivate its hysteresis timer as part of the error path. If the hysteresis timer was armed by the shortly lived 'kfree_skb' probe and user space retries to initiate tracing, a warning will be emitted for trying to initialize an active object [1]. Fix this by properly undoing all the operations that were done prior to probe registration, in both software and hardware code paths. Note that syzkaller managed to fail probe registration by injecting a slab allocation failure [2]. [1] ODEBUG: init active (active state 0) object type: timer_list hint: sched_send_work+0x0/0x60 include/linux/list.h:135 WARNING: CPU: 1 PID: 8649 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 1 PID: 8649 Comm: syz-executor.0 Not tainted 5.11.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 [...] Call Trace: __debug_object_init+0x524/0xd10 lib/debugobjects.c:588 debug_timer_init kernel/time/timer.c:722 [inline] debug_init kernel/time/timer.c:770 [inline] init_timer_key+0x2d/0x340 kernel/time/timer.c:814 net_dm_trace_on_set net/core/drop_monitor.c:1111 [inline] set_all_monitor_traces net/core/drop_monitor.c:1188 [inline] net_dm_monitor_start net/core/drop_monitor.c:1295 [inline] net_dm_cmd_trace+0x720/0x1220 net/core/drop_monitor.c:1339 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:800 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2348 ___sys_sendmsg+0xf3/0x170 net/socket.c:2402 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2435 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae [2] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 CPU: 1 PID: 8645 Comm: syz-executor.0 Not tainted 5.11.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: dump_stack+0xfa/0x151 should_fail.cold+0x5/0xa should_failslab+0x5/0x10 __kmalloc+0x72/0x3f0 tracepoint_add_func+0x378/0x990 tracepoint_probe_register+0x9c/0xe0 net_dm_cmd_trace+0x7fc/0x1220 genl_family_rcv_msg_doit+0x228/0x320 genl_rcv_msg+0x328/0x580 netlink_rcv_skb+0x153/0x420 genl_rcv+0x24/0x40 netlink_unicast+0x533/0x7d0 netlink_sendmsg+0x856/0xd90 sock_sendmsg+0xcf/0x120 ____sys_sendmsg+0x6e8/0x810 ___sys_sendmsg+0xf3/0x170 __sys_sendmsg+0xe5/0x1b0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 70c69274 ("drop_monitor: Initialize timer and work item upon tracing enable") Fixes: 8ee2267a ("drop_monitor: Convert to using devlink tracepoint") Reported-by: syzbot+779559d6503f3a56213d@syzkaller.appspotmail.com Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-03-10 The following pull-request contains BPF updates for your *net* tree. We've added 8 non-merge commits during the last 5 day(s) which contain a total of 11 files changed, 136 insertions(+), 17 deletions(-). The main changes are: 1) Reject bogus use of vmlinux BTF as map/prog creation BTF, from Alexei Starovoitov. 2) Fix allocation failure splat in x86 JIT for large progs. Also fix overwriting percpu cgroup storage from tracing programs when nested, from Yonghong Song. 3) Fix rx queue retrieval in XDP for multi-queue veth, from Maciej Fijalkowski. 4) Fix bpf_check_mtu() helper API before freeze to have mtu_len as custom skb/xdp L3 input length, from Jesper Dangaard Brouer. 5) Fix inode_storage's lookup_elem return value upon having bad fd, from Tal Lossos. 6) Fix bpftool and libbpf cross-build on MacOS, from Georgi Valkov. ==================== Signed-off-by: -
Wei Wang authored
Syzbot reported the suspecious RCU usage in nexthop_fib6_nh() when called from ipv6_route_seq_show(). The reason is ipv6_route_seq_start() calls rcu_read_lock_bh(), while nexthop_fib6_nh() calls rcu_dereference_rtnl(). The fix proposed is to add a variant of nexthop_fib6_nh() to use rcu_dereference_bh_rtnl() for ipv6_route_seq_show(). The reported trace is as follows: ./include/net/nexthop.h:416 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by syz-executor.0/17895: at: seq_read+0x71/0x12a0 fs/seq_file.c:169 at: seq_file_net include/linux/seq_file_net.h:19 [inline] at: ipv6_route_seq_start+0xaf/0x300 net/ipv6/ip6_fib.c:2616 stack backtrace: CPU: 1 PID: 17895 Comm: syz-executor.0 Not tainted 4.15.0-syzkaller #0 Call Trace: [<ffffffff849edf9e>] __dump_stack lib/dump_stack.c:17 [inline] [<ffffffff849edf9e>] dump_stack+0xd8/0x147 lib/dump_stack.c:53 [<ffffffff8480b7fa>] lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5745 [<ffffffff8459ada6>] nexthop_fib6_nh include/net/nexthop.h:416 [inline] [<ffffffff8459ada6>] ipv6_route_native_seq_show net/ipv6/ip6_fib.c:2488 [inline] [<ffffffff8459ada6>] ipv6_route_seq_show+0x436/0x7a0 net/ipv6/ip6_fib.c:2673 [<ffffffff81c556df>] seq_read+0xccf/0x12a0 fs/seq_file.c:276 [<ffffffff81dbc62c>] proc_reg_read+0x10c/0x1d0 fs/proc/inode.c:231 [<ffffffff81bc28ae>] do_loop_readv_writev fs/read_write.c:714 [inline] [<ffffffff81bc28ae>] do_loop_readv_writev fs/read_write.c:701 [inline] [<ffffffff81bc28ae>] do_iter_read+0x49e/0x660 fs/read_write.c:935 [<ffffffff81bc81ab>] vfs_readv+0xfb/0x170 fs/read_write.c:997 [<ffffffff81c88847>] kernel_readv fs/splice.c:361 [inline] [<ffffffff81c88847>] default_file_splice_read+0x487/0x9c0 fs/splice.c:416 [<ffffffff81c86189>] do_splice_to+0x129/0x190 fs/splice.c:879 [<ffffffff81c86f66>] splice_direct_to_actor+0x256/0x890 fs/splice.c:951 [<ffffffff81c8777d>] do_splice_direct+0x1dd/0x2b0 fs/splice.c:1060 [<ffffffff81bc4747>] do_sendfile+0x597/0xce0 fs/read_write.c:1459 [<ffffffff81bca205>] SYSC_sendfile64 fs/read_write.c:1520 [inline] [<ffffffff81bca205>] SyS_sendfile64+0x155/0x170 fs/read_write.c:1506 [<ffffffff81015fcf>] do_syscall_64+0x1ff/0x310 arch/x86/entry/common.c:305 [<ffffffff84a00076>] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: f88d8ea6 ("ipv6: Plumb support for nexthop object in a fib6_info") Reported-by:Wei Wang <weiwan@google.com> Cc: David Ahern <dsahern@kernel.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Petr Machata <petrm@nvidia.com> Cc: Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== Fix ip6ip6 crash for collect_md skbs Fix a NULL pointer deref panic I ran into for regular ip6ip6 tunnel devices when collect_md populated skbs were redirected to them for xmit. See patches for further details, thanks! ==================== Signed-off-by: -
Daniel Borkmann authored
I ran into a crash where setting up a ip6ip6 tunnel device which was /not/ set to collect_md mode was receiving collect_md populated skbs for xmit. The BPF prog was populating the skb via bpf_skb_set_tunnel_key() which is assigning special metadata dst entry and then redirecting the skb to the device, taking ip6_tnl_start_xmit() -> ipxip6_tnl_xmit() -> ip6_tnl_xmit() and in the latter it performs a neigh lookup based on skb_dst(skb) where we trigger a NULL pointer dereference on dst->ops->neigh_lookup() since the md_dst_ops do not populate neigh_lookup callback with a fake handler. Transform the md_dst_ops into generic dst_blackhole_ops that can also be reused elsewhere when needed, and use them for the metadata dst entries as callback ops. Also, remove the dst_md_discard{,_out}() ops and rely on dst_discard{,_out}() from dst_init() which free the skb the same way modulo the splat. Given we will be able to recover just fine from there, avoid any potential splats iff this gets ever triggered in future (or worse, panic on warns when set). Fixes: f38a9eb1 ("dst: Metadata destinations") Signed-off-by:Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Daniel Borkmann authored
Move generic blackhole dst ops to the core and use them from both ipv4_dst_blackhole_ops and ip6_dst_blackhole_ops where possible. No functional change otherwise. We need these also in other locations and having to define them over and over again is not great. Signed-off-by:
-
git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau. 2) TX skb error handling fix in mt76 driver, also from Felix. 3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman. 4) Avoid double free of percpu pointers when freeing a cloned bpf prog. From Cong Wang. 5) Use correct printf format for dma_addr_t in ath11k, from Geert Uytterhoeven. 6) Fix resolve_btfids build with older toolchains, from Kun-Chuan Hsieh. 7) Don't report truncated frames to mac80211 in mt76 driver, from Lorenzop Bianconi. 8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang. 9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann. 10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from Arjun Roy. 11) Ignore routes with deleted nexthop object in mlxsw, from Ido Schimmel. 12) Need to undo tcp early demux lookup sometimes in nf_nat, from Florian Westphal. 13) Fix gro aggregation for udp encaps with zero csum, from Daniel Borkmann. 14) Make sure to always use imp*_ndo_send when necessaey, from Jason A. Donenfeld. 15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov. 16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin. 17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir Oltean. 18) Make sure textsearch copntrol block is large enough, from Wilem de Bruijn. 19) Revert MAC changes to r8152 leading to instability, from Hates Wang. 20) Advance iov in 9p even for empty reads, from Jissheng Zhang. 21) Double hook unregister in nftables, from PabloNeira Ayuso. 22) Fix memleak in ixgbe, fropm Dinghao Liu. 23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne. 24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang Tang. 25) Fix DOI refcount bugs in cipso, from Paul Moore. 26) One too many irqsave in ibmvnic, from Junlin Yang. 27) Fix infinite loop with MPLS gso segmenting via virtio_net, from Balazs Nemeth. * git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits) s390/qeth: fix notification for pending buffers during teardown s390/qeth: schedule TX NAPI on QAOB completion s390/qeth: improve completion of pending TX buffers s390/qeth: fix memory leak after failed TX Buffer allocation net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0 net: check if protocol extracted by virtio_net_hdr_set_proto is correct net: dsa: xrs700x: check if partner is same as port in hsr join net: lapbether: Remove netif_start_queue / netif_stop_queue atm: idt77252: fix null-ptr-dereference atm: uPD98402: fix incorrect allocation atm: fix a typo in the struct description net: qrtr: fix error return code of qrtr_sendmsg() mptcp: fix length of ADD_ADDR with port sub-option net: bonding: fix error return code of bond_neigh_init() net: enetc: allow hardware timestamping on TX queues with tc-etf enabled net: enetc: set MAC RX FIFO to recommended value net: davicom: Use platform_get_irq_optional() net: davicom: Fix regulator not turned off on driver removal net: davicom: Fix regulator not turned off on failed probe net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports ... -
git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Fix opcode filtering for exceptions, and clean up defconfig" * git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc: sparc: sparc64_defconfig: remove duplicate CONFIGs sparc64: Fix opcode filtering in handling of no fault loads
-
Corentin Labbe authored
After my patch there is CONFIG_ATA defined twice. Remove the duplicate one. Same problem for CONFIG_HAPPYMEAL, except I added as builtin for boot test with NFS. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: a57cdeb3 ("sparc: sparc64_defconfig: add necessary configs for qemu") Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Rob Gardner authored
is_no_fault_exception() has two bugs which were discovered via random opcode testing with stress-ng. Both are caused by improper filtering of opcodes. The first bug can be triggered by a floating point store with a no-fault ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode C1A01040. The code first tests op3[5] (0x1000000), which denotes a floating point instruction, and then tests op3[2] (0x200000), which denotes a store instruction. But these bits are not mutually exclusive, and the above mentioned opcode has both bits set. The intent is to filter out stores, so the test for stores must be done first in order to have any effect. The second bug can be triggered by a floating point load with one of the invalid ASI values 0x8e or 0x8f, which pass this check in is_no_fault_exception(): if ((asi & 0xf2) == ASI_PNF) An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38", opcode CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal in handle_ldf_stq(), and is_no_fault_exception() must not allow these invalid asi values to make it that far. In both of these cases, handle_ldf_stq() reacts by calling sun4v_data_access_exception() or spitfire_data_access_exception(), which call is_no_fault_exception() and results in an infinite recursion. Signed-off-by:Rob Gardner <rob.gardner@oracle.com> Tested-by:
Anatoly Pugachev <matorola@gmail.com> Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: fixes 2021-03-09 please apply the following patch series to netdev's net tree. This brings one fix for a memleak in an error path of the setup code. Also several fixes for dealing with pending TX buffers - two for old bugs in their completion handling, and one recent regression in a teardown path. ==================== Signed-off-by: -
Julian Wiedmann authored
The cited commit reworked the state machine for pending TX buffers. In qeth_iqd_tx_complete() it turned PENDING into a transient state, and uses NEED_QAOB for buffers that get parked while waiting for their QAOB completion. But it missed to adjust the check in qeth_tx_complete_buf(). So if qeth_tx_complete_pending_bufs() is called during teardown to drain the parked TX buffers, we no longer raise a notification for af_iucv. Instead of updating the checked state, just move this code into qeth_tx_complete_pending_bufs() itself. This also gets rid of the special-case in the common TX completion path. Fixes: 8908f36d ("s390/qeth: fix af_iucv notification race") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
When a QAOB notifies us that a pending TX buffer has been delivered, the actual TX completion processing by qeth_tx_complete_pending_bufs() is done within the context of a TX NAPI instance. We shouldn't rely on this instance being scheduled by some other TX event, but just do it ourselves. qeth_qdio_handle_aob() is called from qeth_poll(), ie. our main NAPI instance. To avoid touching the TX queue's NAPI instance before/after it is (un-)registered, reorder the code in qeth_open() and qeth_stop() accordingly. Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by:
-
Julian Wiedmann authored
The current design attaches a pending TX buffer to a custom single-linked list, which is anchored at the buffer's slot on the TX ring. The buffer is then checked for final completion whenever this slot is processed during a subsequent TX NAPI poll cycle. But if there's insufficient traffic on the ring, we might never make enough progress to get back to this ring slot and discover the pending buffer's final TX completion. In particular if this missing TX completion blocks the application from sending further traffic. So convert the custom single-linked list code to a per-queue list_head, and scan this list on every TX NAPI cycle. Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by:
-
Julian Wiedmann authored
When qeth_alloc_qdio_queues() fails to allocate one of the buffers that back an Output Queue, the 'out_freeoutqbufs' path will free all previously allocated buffers for this queue. But it misses to free the half-finished queue struct itself. Move the buffer allocation into qeth_alloc_output_queue(), and deal with such errors internally. Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Balazs Nemeth says: ==================== net: prevent infinite loop caused by incorrect proto from virtio_net_hdr_set_proto These patches prevent an infinite loop for gso packets with a protocol from virtio net hdr that doesn't match the protocol in the packet. Note that packets coming from a device without header_ops->parse_protocol being implemented will not be caught by the check in virtio_net_hdr_to_skb, but the infinite loop will still be prevented by the check in the gso layer. Changes from v2 to v3: - Remove unused *eth. - Use MPLS_HLEN to also check if the MPLS header length is a multiple of four. ==================== Signed-off-by: -
Balazs Nemeth authored
A packet with skb_inner_network_header(skb) == skb_network_header(skb) and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers from the packet. Subsequently, the call to skb_mac_gso_segment will again call mpls_gso_segment with the same packet leading to an infinite loop. In addition, ensure that the header length is a multiple of four, which should hold irrespective of the number of stacked labels. Signed-off-by:
Balazs Nemeth <bnemeth@redhat.com> Acked-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
-
Balazs Nemeth authored
For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't set) based on the type in the virtio net hdr, but the skb could contain anything since it could come from packet_snd through a raw socket. If there is a mismatch between what virtio_net_hdr_set_proto sets and the actual protocol, then the skb could be handled incorrectly later on. An example where this poses an issue is with the subsequent call to skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set correctly. A specially crafted packet could fool skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned. Avoid blindly trusting the information provided by the virtio net header by checking that the protocol in the packet actually matches the protocol set by virtio_net_hdr_set_proto. Note that since the protocol is only checked if skb->dev implements header_ops->parse_protocol, packets from devices without the implementation are not checked at this stage. Fixes: 9274124f ("net: stricter validation of untrusted gso packets") Signed-off-by:
-
George McCollister authored
Don't assign dp to partner if it's the same port that xrs700x_hsr_join was called with. The partner port is supposed to be the other port in the HSR/PRP redundant pair not the same port. This fixes an issue observed in testing where forwarding between redundant HSR ports on this switch didn't work depending on the order the ports were added to the hsr device. Fixes: bd62e6f5 ("net: dsa: xrs700x: add HSR offloading support") Signed-off-by:
George McCollister <george.mccollister@gmail.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
- 09 Mar, 2021 7 commits
-
-
Yonghong Song authored
x86 bpf_jit_comp.c used kmalloc_array to store jited addresses for each bpf insn. With a large bpf program, we have see the following allocation failures in our production server: page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0" Call Trace: dump_stack+0x50/0x70 warn_alloc.cold.120+0x72/0xd2 ? __alloc_pages_direct_compact+0x157/0x160 __alloc_pages_slowpath+0xcdb/0xd00 ? get_page_from_freelist+0xe44/0x1600 ? vunmap_page_range+0x1ba/0x340 __alloc_pages_nodemask+0x2c9/0x320 kmalloc_order+0x18/0x80 kmalloc_order_trace+0x1d/0xa0 bpf_int_jit_compile+0x1e2/0x484 ? kmalloc_order_trace+0x1d/0xa0 bpf_prog_select_runtime+0xc3/0x150 bpf_prog_load+0x480/0x720 ? __mod_memcg_lruvec_state+0x21/0x100 __do_sys_bpf+0xc31/0x2040 ? close_pdeo+0x86/0xe0 do_syscall_64+0x42/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f2f300f7fa9 Code: Bad RIP value. Dumped assembly: ffffffff810b6d70 <bpf_int_jit_compile>: ; { ffffffff810b6d70: e8 eb a5 b4 00 callq 0xffffffff81c01360 <__fentry__> ffffffff810b6d75: 41 57 pushq %r15 ... ffffffff810b6f39: e9 72 fe ff ff jmp 0xffffffff810b6db0 <bpf_int_jit_compile+0x40> ; addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL); ffffffff810b6f3e: 8b 45 0c movl 12(%rbp), %eax ; return __kmalloc(bytes, flags); ffffffff810b6f41: be c0 0c 00 00 movl $3264, %esi ; addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL); ffffffff810b6f46: 8d 78 01 leal 1(%rax), %edi ; if (unlikely(check_mul_overflow(n, size, &bytes))) ffffffff810b6f49: 48 c1 e7 02 shlq $2, %rdi ; return __kmalloc(bytes, flags); ffffffff810b6f4d: e8 8e 0c 1d 00 callq 0xffffffff81287be0 <__kmalloc> ; if (!addrs) { ffffffff810b6f52: 48 85 c0 testq %rax, %rax Change kmalloc_array() to kvmalloc_array() to avoid potential allocation error for big bpf programs. Signed-off-by:Yonghong Song <yhs@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Yonghong Song authored
For kuprobe and tracepoint bpf programs, kernel calls trace_call_bpf() which calls BPF_PROG_RUN_ARRAY_CHECK() to run the program array. Currently, BPF_PROG_RUN_ARRAY_CHECK() also calls bpf_cgroup_storage_set() to set percpu cgroup local storage with NULL value. This is due to Commit 394e40a2 ("bpf: extend bpf_prog_array to store pointers to the cgroup storage") which modified __BPF_PROG_RUN_ARRAY() to call bpf_cgroup_storage_set() and this macro is also used by BPF_PROG_RUN_ARRAY_CHECK(). kuprobe and tracepoint programs are not allowed to call bpf_get_local_storage() helper hence does not access percpu cgroup local storage. Let us change BPF_PROG_RUN_ARRAY_CHECK() not to modify percpu cgroup local storage. The issue is observed when I tried to debug [1] where percpu data is overwritten due to preempt_disable -> migration_disable change. This patch does not completely fix the above issue, which will be addressed separately, e.g., multiple cgroup prog runs may preempt each other. But it does fix any potential issue caused by tracing program overwriting percpu cgroup storage: - in a busy system, a tracing program is to run between bpf_cgroup_storage_set() and the cgroup prog run. - a kprobe program is triggered by a helper in cgroup prog before bpf_get_local_storage() is called. [1] https://lore.kernel.org/bpf/CAKH8qBuXCfUz=w8L+Fj74OaUpbosO29niYwTki7e3Ag044_aww@mail.gmail.com/T Fixes: 394e40a2 ("bpf: extend bpf_prog_array to store pointers to the cgroup storage") Signed-off-by:
Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20210309185028.3763817-1-yhs@fb.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: "A bunch of fixes for the GPIO subsystem. We have two regressions in the core code spotted right after the merge window, a series of fixes for ACPI GPIO and a subsequent fix for a related regression in gpio-pca953x + a minor tweak in .gitignore and a rework of handling of the gpio-line-names to remedy a regression in stm32mp151. Summary: - fix two regressions in core GPIO subsystem code: one NULL-pointer dereference and one list corruption - read GPIO line names from fwnode instead of using the generic device properties to fix a regression on stm32mp151 - fixes to ACPI GPIO and gpio-pca953x to handle a regression in IRQ handling on Intel Galileo - update .gitignore in GPIO selftests" * tag 'gpio-fixes-for-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: Read "gpio-line-names" from a firmware node gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2 gpiolib: acpi: Allow to find GpioInt() resource by name and index gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk gpiolib: acpi: Add missing IRQF_ONESHOT gpio: fix gpio-device list corruption gpio: fix NULL-deref-on-deregistration regression selftests: gpio: update .gitignore -
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fixes for boot breakage because of misaligned FDTs - fix for overwritten exception handlers - enable MIPS optimized crypto for all MIPS CPUs to improve wireguard performance * tag 'mips-fixes_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kernel: Reserve exception base early to prevent corruption MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes crypto: mips/poly1305 - enable for all MIPS processors MIPS: boot/compressed: Copy DTB to aligned address
-
Xie He authored
For the devices in this driver, the default qdisc is "noqueue", because their "tx_queue_len" is 0. In function "__dev_queue_xmit" in "net/core/dev.c", devices with the "noqueue" qdisc are specially handled. Packets are transmitted without being queued after a "dev->flags & IFF_UP" check. However, it's possible that even if this check succeeds, "ops->ndo_stop" may still have already been called. This is because in "__dev_close_many", "ops->ndo_stop" is called before clearing the "IFF_UP" flag. If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in "__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it checks "netif_xmit_stopped" and finds that the queue is already stopped. In this case, it will complain that: "Virtual device ... asks to queue packet!" To prevent "__dev_queue_xmit" from generating this complaint, we should not call "netif_stop_queue" in "ops->ndo_stop". We also don't need to call "netif_start_queue" in "ops->ndo_open", because after a netdev is allocated and registered, the "__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need to call "netif_start_queue" to clear it. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Xie He <xie.he.0141@gmail.com> Acked-by:
Martin Schiller <ms@dev.tdt.de> Signed-off-by:
-
Thomas Bogendoerfer authored
BMIPS is one of the few platforms that do change the exception base. After commit 2dcb3964 ("memblock: do not start bottom-up allocations with kernel_end") we started seeing BMIPS boards fail to boot with the built-in FDT being corrupted. Before the cited commit, early allocations would be in the [kernel_end, RAM_END] range, but after commit they would be within [RAM_START + PAGE_SIZE, RAM_END]. The custom exception base handler that is installed by bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the memory region allocated by unflatten_and_copy_device_tree() thus corrupting the FDT used by the kernel. To fix this, we need to perform an early reservation of the custom exception space. Additional we reserve the first 4k (1k for R3k) for either normal exception vector space (legacy CPUs) or special vectors like cache exceptions. Huge thanks to Serge for analysing and proposing a solution to this issue. Fixes: 2dcb3964 ("memblock: do not start bottom-up allocations with kernel_end") Reported-by:
Kamal Dasu <kdasu.kdev@gmail.com> Debugged-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc updates from David Miller: "Just some more random bits from Al, including a conversion over to generic extables" * git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc: sparc32: take ->thread.flags out sparc32: get rid of fake_swapper_regs sparc64: get rid of fake_swapper_regs sparc32: switch to generic extables sparc32: switch copy_user.S away from range exception table entries sparc32: get rid of range exception table entries in checksum_32.S sparc32: switch __bzero() away from range exception table entries sparc32: kill lookup_fault() sparc32: don't bother with lookup_fault() in __bzero()
-
- 08 Mar, 2021 12 commits
-
-
Tong Zhang authored
this one is similar to the phy_data allocation fix in uPD98402, the driver allocate the idt77105_priv and store to dev_data but later dereference using dev->dev_data, which will cause null-ptr-dereference. fix this issue by changing dev_data to phy_data so that PRIV(dev) can work correctly. Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Signed-off-by:
-
Tong Zhang authored
dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock (i.e dev->phy_data->lock) will result in a null-ptr-dereference. I believe this is a typo and what it actually want to do is to allocate phy_data instead of dev_data. Signed-off-by:
-
Tong Zhang authored
phy_data means private PHY data not date Signed-off-by:
-
Jia-Ju Bai authored
When sock_alloc_send_skb() returns NULL to skb, no error return code of qrtr_sendmsg() is assigned. To fix this bug, rc is assigned with -ENOMEM in this case. Fixes: 194ccc88 ("net: qrtr: Support decoding incoming v2 packets") Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Davide Caratti authored
in current Linux, MPTCP peers advertising endpoints with port numbers use a sub-option length that wrongly accounts for the trailing TCP NOP. Also, receivers will only process incoming ADD_ADDR with port having such wrong sub-option length. Fix this, making ADD_ADDR compliant to RFC8684 §3.4.1. this can be verified running tcpdump on the kselftests artifacts: unpatched kernel: [root@bottarga mptcp]# tcpdump -tnnr unpatched.pcap | grep add-addr reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535 IP 10.0.1.1.10000 > 10.0.1.2.53078: Flags [.], ack 101, win 509, options [nop,nop,TS val 214459678 ecr 521312851,mptcp add-addr v1 id 1 a00:201:2774:2d88:7436:85c3:17fd:101], length 0 IP 10.0.1.2.53078 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 521312852 ecr 214459678,mptcp add-addr[bad opt]] patched kernel: [root@bottarga mptcp]# tcpdump -tnnr patched.pcap | grep add-addr reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535 IP 10.0.1.1.10000 > 10.0.1.2.38178: Flags [.], ack 101, win 509, options [nop,nop,TS val 3728873902 ecr 2732713192,mptcp add-addr v1 id 1 10.0.2.1:10100 hmac 0xbccdfcbe59292a1f,nop,nop], length 0 IP 10.0.1.2.38178 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 2732713195 ecr 3728873902,mptcp add-addr v1-echo id 1 10.0.2.1:10100,nop,nop], length 0 Fixes: 22fb85ff ("mptcp: add port support for ADD_ADDR suboption writing") CC: stable@vger.kernel.org # 5.11+ Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-and-tested-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
Add tests that use mtu_len as input parameter in BPF-helper bpf_check_mtu(). The BPF-helper is avail from both XDP and TC context. Add two tests per context, one that tests below MTU and one that exceeds the MTU. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/161521556358.3515614.5915221479709358964.stgit@firesoul
-
Jesper Dangaard Brouer authored
The FIB lookup example[1] show how the IP-header field tot_len (iph->tot_len) is used as input to perform the MTU check. This patch extend the BPF-helper bpf_check_mtu() with the same ability to provide the length as user parameter input, via mtu_len parameter. This still needs to be done before the bpf_check_mtu() helper API becomes frozen. [1] samples/bpf/xdp_fwd_kern.c Fixes: 34b2021c ("bpf: Add BPF-helper for MTU checking") Signed-off-by:
-
Jia-Ju Bai authored
When slave is NULL or slave_ops->ndo_neigh_setup is NULL, no error return code of bond_neigh_init() is assigned. To fix this bug, ret is assigned with -EINVAL in these cases. Fixes: 9e99bfef ("bonding: fix bond_neigh_init()") Reported-by:
-
Vladimir Oltean authored
The txtime is passed to the driver in skb->skb_mstamp_ns, which is actually in a union with skb->tstamp (the place where software timestamps are kept). Since commit b50a5c70 ("net: allow simultaneous SW and HW transmit timestamping"), __sock_recv_timestamp has some logic for making sure that the two calls to skb_tstamp_tx: skb_tx_timestamp(skb) # Software timestamp in the driver -> skb_tstamp_tx(skb, NULL) and skb_tstamp_tx(skb, &shhwtstamps) # Hardware timestamp in the driver will both do the right thing and in a race-free manner, meaning that skb_tx_timestamp will deliver a cmsg with the software timestamp only, and skb_tstamp_tx with a non-NULL hwtstamps argument will deliver a cmsg with the hardware timestamp only. Why are races even possible? Well, because although the software timestamp skb->tstamp is private per skb, the hardware timestamp skb_hwtstamps(skb) lives in skb_shinfo(skb), an area which is shared between skbs and their clones. And skb_tstamp_tx works by cloning the packets when timestamping them, therefore attempting to perform hardware timestamping on an skb's clone will also change the hardware timestamp of the original skb. And the original skb might have been yet again cloned for software timestamping, at an earlier stage. So the logic in __sock_recv_timestamp can't be as simple as saying "does this skb have a hardware timestamp? if yes I'll send the hardware timestamp to the socket, otherwise I'll send the software timestamp", precisely because the hardware timestamp is shared. Instead, it's quite the other way around: __sock_recv_timestamp says "does this skb have a software timestamp? if yes, I'll send the software timestamp, otherwise the hardware one". This works because the software timestamp is not shared with clones. But that means we have a problem when we attempt hardware timestamping with skbs that don't have the skb->tstamp == 0. __sock_recv_timestamp will say "oh, yeah, this must be some sort of odd clone" and will not deliver the hardware timestamp to the socket. And this is exactly what is happening when we have txtime enabled on the socket: as mentioned, that is put in a union with skb->tstamp, so it is quite easy to mistake it. Do what other drivers do (intel igb/igc) and write zero to skb->tstamp before taking the hardware timestamp. It's of no use to us now (we're already on the TX confirmation path). Fixes: 0d08c9ec ("enetc: add support time specific departure base on the qos etf") Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
-
Alex Marginean authored
On LS1028A, the MAC RX FIFO defaults to the value 2, which is too high and may lead to RX lock-up under traffic at a rate higher than 6 Gbps. Set it to 1 instead, as recommended by the hardware design team and by later versions of the ENETC block guide. Signed-off-by:
Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by:
Jason Liu <jason.hui.liu@nxp.com> Signed-off-by:
-
Paul Cercueil authored
The second IRQ line really is optional, so use platform_get_irq_optional() to obtain it. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
-
Paul Cercueil authored
We must disable the regulator that was enabled in the probe function. Fixes: 7994fe55 ("dm9000: Add regulator and reset support to dm9000") Signed-off-by:
-
