- 02 Feb, 2008 38 commits
-
-
Borislav Petkov authored
such as ERROR: switch and case should be at the same indent ERROR: need spaces around that '=' (ctx:VxV) ERROR: trailing statements should be on next line WARNING: no space between function name and open parenthesis '(' WARNING: printk() should include KERN_ facility level ERROR: That open brace { should be on the previous line ERROR: use tabs not spaces ERROR: do not use assignment in if condition WARNING: braces {} are not necessary for single statement blocks ERROR: need space after that ',' (ctx:VxV) WARNING: line over 80 characters ERROR: do not use assignment in if condition ... and so on. Signed-off-by:Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Borislav Petkov authored
..and replace them with flag enums. Bart: - fix idefloppy_media_changed() return value Signed-off-by:
-
Borislav Petkov authored
This flag was never being set in the code so remove it. By the way, the code in the second patch was being executed unconditionally, i.e. in case pc->retries > IDEFLOPPY_MAX_PC_RETRIES is true (actually that is the only case when the outer if-test passed), !test_bit(PC_ABORT, &pc->flags) was always true so the comment is now incorrect and has to go. Signed-off-by:
-
Borislav Petkov authored
This info is already available through ioctl() and /proc Bart: - dump 'gcw.packet_size' for unsupported packet sizes Signed-off-by:
-
Borislav Petkov authored
This flag is not being set anywhere in the driver so it can go. Bart: - minor CodingStyle fixup Signed-off-by:
-
Borislav Petkov authored
We merge idefloppy_{input,output}_buffers() into idefloppy_io_buffers() by introducing a 4th arg. called direction. According to its value we atapi_input_bytes() or atapi_output_bytes(). Also, this simplifies the interrupt handler logic a bit. Finally, rename idefloppy_io_buffers() to ide_floppy_io_buffers(). Signed-off-by: -
Borislav Petkov authored
Also, move xfer_func_t typedef to the ide.h since it is used by two drivers now (more coming). Bart: - use __func__ while at it Signed-off-by:
-
Borislav Petkov authored
Signed-off-by:
-
Borislav Petkov authored
In addition to shortening the function name, move the printk-call into the function thereby saving some code lines. Also, make the function out_of_line since it is not on a performance critical path. Finally, rename the reworked function to ide_floppy..(). Bart: - minor CodingStyle fixup Signed-off-by:
-
Borislav Petkov authored
Bart: - use 'hwif' instead of 'HWIF(drive)' - minor CodingStyle fixup Signed-off-by:
-
Borislav Petkov authored
By passing idefloppy_floppy_t *floppy to the factored out functions, we get rid of (almost) all local vars so stack usage should be at minimum here. Also, we merge idefloppy_begin_format() into idefloppy_format_start() since it is its only user. Also, rename idefloppy_format_start() to idefloppy_format_unit(). Finally, rename the reworked functions to ide_floppy..(). Bart - minor CodingStyle fixup Signed-off-by:
-
Borislav Petkov authored
Also, - remove the accompanying 4 byte idefloppy_capacity_header. - rename functions from idefloppy_... to ide_floppy_... after cleanup. - simplify loop in ide_floppy_get_capacity() by reversing if-test condition logically. - finally, fix white space and checkpatch.pl issues Signed-off-by:
-
Borislav Petkov authored
Signed-off-by:
-
Borislav Petkov authored
Signed-off-by:
-
Borislav Petkov authored
While at it, collapse idefloppy_analyze_error() into idefloppy_request_sense_callback() since the latter was its only user. Signed-off-by:
-
Borislav Petkov authored
Signed-off-by:
-
Borislav Petkov authored
This change is rather temporary and is in preparation of using generic commands as is the case with ide-cd and the uniform cdrom layer (i.e. init_cdrom_command()) However, before this happens, we'll have to remove all typedefs and teach idefloppy_create_mode_sense_cmd() to work directly on u8 buffers. Also, since idefloppy_get_capability_page() was used to read only the sfrp bit, rename the latter so that the name reflects what it does. Signed-off-by:
-
Borislav Petkov authored
* some debug_log() calls were not using "ide-floppy: " prefix * a few used printk levels different than KERN_INFO (KERN_NOTICE and KERN_ERR, which is the default one if no level is given) Bart: - fix build issues for IDEFLOPPY_DEBUG_LOG set to 1 while at it - s/__FUNCTION__/__func__/ Signed-off-by:
-
Borislav Petkov authored
Signed-off-by:
-
Borislav Petkov authored
There were two almost identical function names in ide-floppy.c, which makes their distinction almost impossible. While ide_floppy_release() cleans up the object after the last reference to it has been dropped, idefloppy_release() is the blkdev .release method from struct block_device_operations which releases that last reference. Rename ide_floppy_release() to idefloppy_cleanup_obj() in order to make its purpose more clear. There should be no functionality change resulting from this patch. Signed-off-by:
-
Borislav Petkov authored
This BUG_ON is unneeded since the ->handler != NULL check is performed in ide_set_handler(). Signed-off-by:
-
Borislav Petkov authored
Signed-off-by:
-
Borislav Petkov authored
Replace the ide-floppy packet commands opcode defines with the generic ones. Add a missing GPCMD_WRITE_12 (opcode 0xaa) to the generic ones in cdrom.h. The last one can be found in the current version of INF-8090, p.905. [ Bart: Tejun's libata patch also adding GPCMD_WRITE_12 got merged first ] Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Add ->cable_detect method to ide_hwif_t. * Call the new method in ide_init_port() if: - the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78') - DMA initialization was successful (if hwif->dma_base is not set ide_init_port() sets hwif->ultra_mask to zero) - "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT') * Convert PCI host drivers to use ->cable_detect method. While at it: * Factor out cable detection to separate functions (if not already done). * hpt366.c/it8213.c/slc90e66.c: - don't check cable type if "idex=ata66" is used * pdc202xx_new.c: - add __devinit tag to pdcnew_cable_detect() * pdc202xx_old.c: - rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect() - add __devinit tag to pdc2026x_old_cable_detect() Reviewed-by:Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
* Remove 'struct pci_dev *dev' argument from ide_hwif_setup_dma(). * Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI=n version. * Add 'const struct ide_port_info *d' argument to ide_device_add[_all](). * Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(), move it to ide-probe.c and call it in in ide_device_add_all() instead of ide_pci_setup_ports(). * Move ->mate setup to ide_device_add_all() from ide_port_init(). * Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don't enable ->autotune currently. * Setup hwif->chipset in ide_init_port() but iff pi->chipset is set (to not override setup done by ide_hwif_configure()). * Add ETRAX host handling to ide_device_add_all(). * cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED=n. * pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks setup to pmac_ide_setup_device(). * Add 'struct ide_port_info' instances to legacy host drivers, pass them to ide_device_add() calls and then remove open-coded ports initialization. Reviewed-by:
-
Bartlomiej Zolnierkiewicz authored
* Setup ->mate and ->channel in ide_pci_setup_ports() instead of in ide_hwif_configure(). * Make 'port' parameter for ide_hwif_configure() 'unsigned int'. * Separate PCI specific init from generic init in ide_pci_setup_ports(). Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Always set DMA masks in ide_pci_setup_ports() to make sure that the valid masks for a host are set. Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Nowadays IDE core always provides drive ID and ide-disk always setups drive->capacity64 so this quirk is no longer needed. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Don't override the cable type if the "idex=ata66" parameter was used. While at it: * atiixp.c: factor out cable detection to atiixp_cable_detect() from init_hwif_atiixp(). * cs5535.c: pass 'ide_hwif_t *hwif' instead of 'struct pci_dev *dev' to cs5535_cable_detect(). * scc_pata.c: factor out cable detection to scc_cable_detect() from init_hwif_scc() and remove incorrect comment. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
The host driver must set hwif's ->no_io_32bit setting not drive's one (ide_port_tune_devices() overrides drive's setting). Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
On DTC2278 32-bit I/O has to be enabled for both devices on the port so always enable it during init time and disallow further changes. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: -
git://git.infradead.org/battery-2.6Linus Torvalds authored
* git://git.infradead.org/battery-2.6: apm_power: check I.intval for zero value, we use it as the divisor MAINTAINERS: remove kernel-discuss@handhelds.org list pda_power: implement polling pda_power: various cleanups apm_power: support using VOLTAGE_* properties for apm calculations pda_power: add suspend/resume support power_supply: add few more values and props pda_power: only register available psu power: fix incorrect unregistration in power_supply_create_attrs error path power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL [BATTERY] power_supply_leds: use kasprintf [BATTERY] Every file should include the headers containing the prototypes for its global functions.
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-linus' of git://linux-nfs.org/~bfields/linux: (100 commits) SUNRPC: RPC program information is stored in unsigned integers SUNRPC: Move exported symbol definitions after function declaration part 2 NLM: tear down RPC clients in nlm_shutdown_hosts SUNRPC: spin svc_rqst initialization to its own function nfsd: more careful input validation in nfsctl write methods lockd: minor log message fix knfsd: don't bother mapping putrootfh enoent to eperm rdma: makefile rdma: ONCRPC RDMA protocol marshalling rdma: SVCRDMA sendto rdma: SVCRDMA recvfrom rdma: SVCRDMA Core Transport Services rdma: SVCRDMA Transport Module rdma: SVCRMDA Header File svc: Add svc_xprt_names service to replace svc_sock_names knfsd: Support adding transports by writing portlist file svc: Add svc API that queries for a transport instance svc: Add /proc/sys/sunrpc/transport files svc: Add transport hdr size for defer/revisit svc: Move the xprt independent code to the svc_xprt.c file ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (38 commits) suspend: cleanup reference to swsusp_pg_dir[] PM: Remove obsolete /sys/devices/.../power/state docs Hibernation: Invoke suspend notifications after console switch Suspend: Invoke suspend notifications after console switch Suspend: Clean up suspend_64.c Suspend: Add config option to disable the freezer if architecture wants that ACPI: Print message before calling _PTS ACPI hibernation: Call _PTS before suspending devices Hibernation: Introduce begin() and end() callbacks ACPI suspend: Call _PTS before suspending devices ACPI: Separate disabling of GPEs from _PTS ACPI: Separate invocations of _GTS and _BFS from _PTS and _WAK Suspend: Introduce begin() and end() callbacks suspend: fix ia64 allmodconfig build ACPI: clear GPE earily in resume to avoid warning Suspend: Clean up Kconfig (V2) Hibernation: Clean up Kconfig (V2) Hibernation: Update messages Suspend: Use common prefix in messages Hibernation: Remove unnecessary variable declaration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (64 commits) PCI: make pci_bus a struct device PCI: fix codingstyle issues in include/linux/pci.h PCI: fix codingstyle issues in drivers/pci/pci.h PCI: PCIE ASPM support PCI: Fix fakephp deadlock PCI: modify SB700 SATA MSI quirk PCI: Run ACPI _OSC method on root bridges only PCI ACPI: AER driver should only register PCIe devices with _OSC PCI ACPI: Added a function to register _OSC with only PCIe devices. PCI: constify function pointer tables PCI: Convert drivers/pci/proc.c to use unlocked_ioctl pciehp: block new requests from the device before power off pciehp: workaround against Bad DLLP during power off pciehp: wait for 1000ms before LED operation after power off PCI: Remove pci_enable_device_bars() from documentation PCI: Remove pci_enable_device_bars() PCI: Remove users of pci_enable_device_bars() PCI: Add pci_enable_device_{io,mem} intefaces PCI: avoid save the same type of cap multiple times PCI: correctly initialize a structure for pcie_save_pcix_state() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (128 commits) USB: fix codingstyle issues in drivers/usb/core/*.c USB: fix codingstyle issues in drivers/usb/core/message.c USB: fix codingstyle issues in drivers/usb/core/hcd-pci.c USB: fix codingstyle issues in drivers/usb/core/devio.c USB: fix codingstyle issues in drivers/usb/core/devices.c USB: fix codingstyle issues in drivers/usb/core/*.h USB: fix codingstyle issues in include/linux/usb/ USB: fix codingstyle issues in include/linux/usb.h USB: mark USB drivers as being GPL only USB: use a real vendor and product id for root hubs USB: mount options: fix usbfs USB: Fix usb_serial_driver structure for Kobil cardreader driver. usb: ehci should use u16 for isochronous intervals usb: ehci, remove false clear-reset path USB: Use menuconfig objects usb: ohci-sm501 driver usb: dma bounce buffer support USB: last abuses of intfdata in close for usb-serial drivers USB: kl5kusb105 don't flush to logically disconnected devices USB: oti6858: cleanup ...
-
Peter Zijlstra authored
Rafael J. Wysocki reported weird, multi-seconds delays during suspend/resume and bisected it back to: commit 82a1fcb9 Author: Ingo Molnar <mingo@elte.hu> Date: Fri Jan 25 21:08:02 2008 +0100 softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks fix it: - restore the old wakeup mechanism - fix break usage in do_each_thread() { } while_each_thread(). - fix the hotplug switch stmt, a fall-through case was broken. Bisected-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 01 Feb, 2008 2 commits
-
-
Anton Vorontsov authored
Signed-off-by:Anton Vorontsov <cbou@mail.ru>
-
Anton Vorontsov authored
kernel-discuss at handhelds.org is down for months, and nobody knows why. So remove it for now. Signed-off-by:
-
