- 07 May, 2024 40 commits
-
-
Josef Bacik authored
We duplicate the extent cleanup for cow_file_range_inline() in the cow and compressed case. The encoded case doesn't need to do cleanup the same way, so rename cow_file_range_inline to __cow_file_range_inline and then make cow_file_range_inline handle the extent cleanup appropriately, and update the callers. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Josef Bacik authored
Since 4750af3b ("btrfs: prevent extent_clear_unlock_delalloc() to unlock page not locked by __process_pages_contig()") we have been unlocking the locked page manually instead of via extent_clear_unlock_delalloc() because of subpage blocksize support. However we actually disable inline extent creation for subpage blocksize support, so this behavior isn't necessary. Remove this code and comment, if at some point the subpage blocksize code grows support for inline extents this can be re-evaluated. Reviewed-by:
-
Josef Bacik authored
Currently we have a lot of duplicated checks of if (start == 0 && fs_info->sectorsize == PAGE_SIZE) cow_file_range_inline(); Instead of duplicating this check everywhere, consolidate all of the inline extent logic into a helper which documents all of the checks and then use that helper inside of cow_file_range_inline(). With this we can clean up all of the calls to either unconditionally call cow_file_range_inline(), or at least reduce the checks we're doing before we call cow_file_range_inline(); Reviewed-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by:
-
Josef Bacik authored
In the cow path we will clone the reloc csums for relocated data extents, and if there's an error we already have an ordered extent and rely on the ordered extent finishing to clean everything up. There's a problem however, we don't mark the ordered extent with an error, we pretend like everything was just fine. If we were at the end of our range we won't actually bubble up this error anywhere, and we could end up inserting an extent that doesn't have csums where it should have them. Fix this by adding a helper to mark the ordered extent with an error, and then use this when we fail to lookup the csums in btrfs_reloc_clone_csums. Use this helper in the other place where we use the same pattern while we're here. This will prevent us from erroneously inserting the extent that doesn't have the required checksums. Reviewed-by:
-
Qu Wenruo authored
The function create_io_em() is called before we submit an IO, to update the in-memory extent map for the involved range. This patch changes the following aspects: - Does not allow BTRFS_ORDERED_NOCOW type For real NOCOW (excluding NOCOW writes into preallocated ranges) writes, we never call create_io_em(), as we does not need to update the extent map at all. So remove the sanity check allowing BTRFS_ORDERED_NOCOW type. - Add extra sanity checks * PREALLOC - @block_len == len For uncompressed writes. * REGULAR - @block_len == @orig_block_len == @ram_bytes == @len We're creating a new uncompressed extent, and referring all of it. - @orig_start == @start We haven no offset inside the extent. * COMPRESSED - valid @compress_type - @len <= @ram_bytes This is to co-operate with encoded writes, which can cause a new file extent referring only part of a uncompressed extent. Reviewed-by:Filipe Manana <fdmanana@suse.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
With the tree-checker ensuring all inline file extents starts at file offset 0 and has a length no larger than sectorsize, we can simplify the calculation to assigned those fixes values directly. Reviewed-by:
-
Qu Wenruo authored
The extent_map structure is very critical to btrfs, as it is involved for both read and write paths. Unfortunately the structure is not properly explained, making it pretty hard to understand nor to do further improvement. This patch adds extra comments explaining the major members based on my code reading. Hopefully we can find more members to cleanup in the future. Reviewed-by:
-
Naohiro Aota authored
calcu_metadata_size() has a "reserve" argument, but the only caller always set it to "1". The other usage (reserve = 0) is dropped by a commit 0647bf56 ("Btrfs: improve forever loop when doing balance relocation"), which is more than 10 years ago. Drop the argument and simplify the code. Reviewed-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
-
Anand Jain authored
There's another return variable wret that is only passed to ret on error, we can simply use ret. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Anand Jain authored
First, drop err instead reuse ret, choose to return the error instead of goto fail and then return the same error. Do not initialize the ret until where it has to be initialized. Slight logic change in handling the btrfs_search_slot() and btrfs_next_leaf() return value. Signed-off-by:
-
Anand Jain authored
Rename ret to ret2 compile and then err to ret. Also, new ret2 is found to be localized within the 'if (trans)' statement, so move its declaration there. Signed-off-by:
-
Anand Jain authored
In quick_update_accounting() err is used as 2nd return value, which could be achieved just with ret. Signed-off-by:
-
Anand Jain authored
Coding style fixes the function relocate_tree_blocks(). After the fix, ret is the return value variable. Signed-off-by:
-
Anand Jain authored
Code style fix in the function build_backref_tree(). Drop the ret initialization 0, as we don't need it. Signed-off-by:
-
Anand Jain authored
Rename the function's local return variables err and werr to ret. Also, align the variable declarations with the other declarations in the function for better function space alignment. Signed-off-by:
-
Anand Jain authored
Rename the function's local variable werr and err to ret. Reviewed-by:
-
Anand Jain authored
In the function btrfs_write_marked_extents() and in __btrfs_wait_marked_extents() return the actual error if when filemap_fdata<write|wait>_range() fails. Suggested-by:
-
David Sterba authored
There are open coded tests of BTRFS_FS_STATE_DUMMY_FS_INFO and we have a wrapper for that that's a compile-time constant when self-tests are not built in. As this is only for development we can save some bytes and conditions on release configs by using the helper in the remaining cases. Reviewed-by:
-
Filipe Manana authored
There's no need to initialize the delayed inodes xarray with a GFP_ATOMIC flag because that actually does nothing on the xarray operations. That was needed for radix trees, but for xarrays the allocation flags are passed as the last argument to xa_store() (which we are using correctly). So initialize the delayed inodes xarray with a simple xa_init(). Reviewed-by:
-
Filipe Manana authored
Currently try_release_extent_mapping() as an int return type, but we use it as a boolean. Its only caller, the release folio callback, also returns a boolean which corresponds to try_release_extent_mapping()'s return value. So change its return value type to bool as well as its helper try_release_extent_state(). Reviewed-by:
-
Filipe Manana authored
At try_release_extent_mapping(), called during the release folio callback (btrfs_release_folio() callchain), we don't release any extent maps in the range if the GFP flags don't allow blocking. This behaviour is exaggerated because: 1) Both searching for extent maps and removing them are not blocking operations. The only thing that it is the cond_resched() call at the end of the loop that searches for and removes extent maps; 2) We currently only operate on a single page, so for the case where block size matches the page size, we can only have one extent map, and for the case where the block size is smaller than the page size, we can have at most 16 extent maps. So it's very unlikely the cond_resched() call will ever block even in the block size smaller than page size scenario. So instead of not removing any extent maps at all in case the GFP glags don't allow blocking, keep removing extent maps while we don't need to reschedule. This makes it safe for the subpage case and for a future where we can process folios with a size larger than a page. Reviewed-by:
-
Filipe Manana authored
Currently we don't attempt to release extent maps if the inode has an i_size that is not greater than 16M. This condition was added way back in 2008 by commit 70dec807 ("Btrfs: extent_io and extent_state optimizations"), without any explanation about it. A quick chat with Chris on slack revealed that the goal was probably to release the extent maps for small files only when closing the inode. This however can be harmful in case we have tons of such files being kept open for very long periods of time, since we will consume more and more pages for extent maps. So remove the condition. Reviewed-by:
-
Filipe Manana authored
Nowadays we have the btrfs_get_fs_generation() to get the current generation of the filesystem, so there's no need anymore to lock the transaction spinlock to read it. Reviewed-by:
-
Filipe Manana authored
Rename the following variables: 1) "btrfs_inode" to "inode", because it's shorter to type and clear, and we don't have a VFS inode here as well, so there's no confusion; 2) "tree" to "io_tree", to be clear which tree we are dealing with, since we use 2 different trees in the function; 3) "map" to "extent_tree" since "map" gives the idea we are dealing with an extent map for example, but we are dealing with the inode's extent tree (the tree which stores extent maps). These also make the next patches simpler. Reviewed-by:
-
Filipe Manana authored
Add some tracepoints for the extent map shrinker to help debug and analyse main events. These have proved useful during development of the shrinker. Reviewed-by:
-
Filipe Manana authored
Nowadays we have a lock used to synchronize mmap writes with reflink and fsync operations (struct btrfs_inode::i_mmap_lock), so update the comment for btrfs_set_inode_full_sync() to mention that it can also be called while holding that mmap lock. Besides being a valid alternative to the inode's VFS lock, we already have the extent map shrinker using that mmap lock instead. Reviewed-by:
-
Filipe Manana authored
Extent maps are used either to represent existing file extent items, or to represent new extents that are going to be written and the respective file extent items are created when the ordered extent completes. We currently don't have any limit for how many extent maps we can have, neither per inode nor globally. Most of the time this not too noticeable because extent maps are removed in the following situations: 1) When evicting an inode; 2) When releasing folios (pages) through the btrfs_release_folio() address space operation callback. However we won't release extent maps in the folio range if the folio is either dirty or under writeback or if the inode's i_size is less than or equals to 16M (see try_release_extent_mapping(). This 16M i_size constraint was added back in 2008 with commit 70dec807 ("Btrfs: extent_io and extent_state optimizations"), but there's no explanation about why we have it or why the 16M value. This means that for buffered IO we can reach an OOM situation due to too many extent maps if either of the following happens: 1) There's a set of tasks constantly doing IO on many files with a size not larger than 16M, specially if they keep the files open for very long periods, therefore preventing inode eviction. This requires a really high number of such files, and having many non mergeable extent maps (due to random 4K writes for example) and a machine with very little memory; 2) There's a set tasks constantly doing random write IO (therefore creating many non mergeable extent maps) on files and keeping them open for long periods of time, so inode eviction doesn't happen and there's always a lot of dirty pages or pages under writeback, preventing btrfs_release_folio() from releasing the respective extent maps. This second case was actually reported in the thread pointed by the Link tag below, and it requires a very large file under heavy IO and a machine with very little amount of RAM, which is probably hard to happen in practice in a real world use case. However when using direct IO this is not so hard to happen, because the page cache is not used, and therefore btrfs_release_folio() is never called. Which means extent maps are dropped only when evicting the inode, and that means that if we have tasks that keep a file descriptor open and keep doing IO on a very large file (or files), we can exhaust memory due to an unbounded amount of extent maps. This is especially easy to happen if we have a huge file with millions of small extents and their extent maps are not mergeable (non contiguous offsets and disk locations). This was reported in that thread with the following fio test: $ cat test.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="" cat <<EOF > /tmp/fio-job.ini [global] name=fio-rand-write filename=$MNT/fio-rand-write rw=randwrite bs=4K direct=1 numjobs=16 fallocate=none time_based runtime=90000 [file1] size=300G ioengine=libaio iodepth=16 EOF umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT Monitoring the btrfs_extent_map slab while running the test with: $ watch -d -n 1 'cat /sys/kernel/slab/btrfs_extent_map/objects \ /sys/kernel/slab/btrfs_extent_map/total_objects' Shows the number of active and total extent maps skyrocketing to tens of millions, and on systems with a short amount of memory it's easy and quick to get into an OOM situation, as reported in that thread. So to avoid this issue add a shrinker that will remove extents maps, as long as they are not pinned, and takes proper care with any concurrent fsync to avoid missing extents (setting the full sync flag while in the middle of a fast fsync). This shrinker is triggered through the callbacks nr_cached_objects and free_cached_objects of struct super_operations. The shrinker will iterate over all roots and over all inodes of each root, and keeps track of the last scanned root and inode, so that the next time it runs, it starts from that root and from the next inode. This is similar to what xfs does for its inode reclaim (implements those callbacks, and cycles through inodes by starting from where it ended last time). Reviewed-by:
-
Filipe Manana authored
Add a per cpu counter that tracks the total number of extent maps that are in extent trees of inodes that belong to fs trees. This is going to be used in an upcoming change that adds a shrinker for extent maps. Only extent maps for fs trees are considered, because for special trees such as the data relocation tree we don't want to evict their extent maps which are critical for the relocation to work, and since those are limited, it's not a concern to have them in memory during the relocation of a block group. Another case are extent maps for free space cache inodes, which must always remain in memory, but those are limited (there's only one per free space cache inode, which means one per block group). Reviewed-by:
-
Filipe Manana authored
Extent maps are always associated to an inode's extent map tree, so there's no need to pass the extent map tree explicitly to try_merge_map(). In order to facilitate an upcoming change that adds a shrinker for extent maps, change try_merge_map() to receive the inode instead of its extent map tree. Reviewed-by:
-
Filipe Manana authored
Extent maps are always associated to an inode's extent map tree, so there's no need to pass the extent map tree explicitly to setup_extent_mapping(). In order to facilitate an upcoming change that adds a shrinker for extent maps, change setup_extent_mapping() to receive the inode instead of its extent map tree. Reviewed-by:
-
Filipe Manana authored
Extent maps are always associated to an inode's extent map tree, so there's no need to pass the extent map tree explicitly to replace_extent_mapping(). In order to facilitate an upcoming change that adds a shrinker for extent maps, change replace_extent_mapping() to receive the inode instead of its extent map tree. Reviewed-by:
-
Filipe Manana authored
Extent maps are always associated to an inode's extent map tree, so there's no need to pass the extent map tree explicitly to remove_extent_mapping(). In order to facilitate an upcoming change that adds a shrinker for extent maps, change remove_extent_mapping() to receive the inode instead of its extent map tree. Reviewed-by:
-
Filipe Manana authored
Extent maps are always associated to an inode's extent map tree, so there's no need to pass the extent map tree explicitly to clear_em_logging(). In order to facilitate an upcoming change that adds a shrinker for extent maps, change clear_em_logging() to receive the inode instead of its extent map tree. Reviewed-by:
-
Filipe Manana authored
Extent maps are always added to an inode's extent map tree, so there's no need to pass the extent map tree explicitly to add_extent_mapping(). In order to facilitate an upcoming change that adds a shrinker for extent maps, change add_extent_mapping() to receive the inode instead of its extent map tree. Reviewed-by:
-
Josef Bacik authored
A comment from Filipe on one of my previous cleanups brought my attention to a new helper we have for getting the root id of a root, which makes it easier to read in the code. The changes where made with the following Coccinelle semantic patch: // <smpl> @@ expression E,E1; @@ ( E->root_key.objectid = E1 | - E->root_key.objectid + btrfs_root_id(E) ) // </smpl> Reviewed-by:
-
Josef Bacik authored
Our subpage testing started hanging on generic/560 and I bisected it down to 1cab1375 ("btrfs: reuse cloned extent buffer during fiemap to avoid re-allocations"). This is subtle because we use eb->start to figure out where in the folio we're copying to when we're subpage, as our ->start may refer to an area inside of the folio. For example, assume a 16K page size machine with a 4K node size, and assume that we already have a cloned extent buffer when we cloned the previous search. copy_extent_buffer_full() will do the following when copying the extent buffer path->nodes[0] (src) into cloned (dest): src->start = 8k; // this is the new leaf we're cloning cloned->start = 4k; // this is left over from the previous clone src_addr = folio_address(src->folios[0]); dest_addr = folio_address(dest->folios[0]); memcpy(dest_addr + get_eb_offset_in_folio(dst, 0), src_addr + get_eb_offset_in_folio(src, 0), src->len); Now get_eb_offset_in_folio() is where the problems occur, because for sub-pagesize blocksize we can have multiple eb's per folio, the code for this is as follows size_t get_eb_offset_in_folio(eb, offset) { return (eb->start + offset & (folio_size(eb->folio[0]) - 1)); } So in the above example we are copying into offset 4K inside the folio. However once we update cloned->start to 8K to match the src the math for get_eb_offset_in_folio() changes, and any subsequent reads (i.e. btrfs_item_key_to_cpu()) will start reading from the offset 8K instead of 4K where we copied to, giving us garbage. Fix this by setting start before we co copy_extent_buffer_full() to make sure that we're copying into the same offset inside of the folio that we will read from later. All other sites of copy_extent_buffer_full() are correct because we either set ->start beforehand or we simply don't change it in the case of the tree-log usage. With this fix we now pass generic/560 on our subpage tests. Fixes: 1cab1375 ("btrfs: reuse cloned extent buffer during fiemap to avoid re-allocations") Reviewed-by:
-
Josef Bacik authored
Now that these two structs are the same, move the btrfs_data_ref and btrfs_tree_ref up and use these in the btrfs_delayed_ref_node. Then remove the btrfs_delayed_*_ref structs. Reviewed-by:
-
Josef Bacik authored
Now that we don't use these helpers anywhere, remove them. Reviewed-by:
-
Josef Bacik authored
We only ever need to use this to get the level of the tree block ref, so use the btrfs_delayed_ref_owner() helper, which returns the level for the given reference. Reviewed-by:
-
Josef Bacik authored
Now that most of our elements are inside of btrfs_delayed_ref_node directly and we have helpers for the delayed_data_ref bits, go ahead and remove all direct usage of btrfs_delayed_data_ref and use the helpers where needed. Reviewed-by:
-
