- 20 Jul, 2016 1 commit
-
-
Kamal Mostafa authored
Ignore: yes Signed-off-by:Kamal Mostafa <kamal@canonical.com>
-
- 19 Jul, 2016 5 commits
-
-
Seth Forshee authored
Signed-off-by:Seth Forshee <seth.forshee@canonical.com>
-
Jason Gerecke authored
BugLink: http://bugs.launchpad.net/bugs/1603975 A tablet PC booted into Windows may have its pen/touch hardware switched into "Wacom mode" similar to what we do with explicitly-supported hardware. Some devices appear to maintain this state across reboots, preventing their use with the generic HID driver. This patch adds support for detecting the presence of the mode switch feature report used by devices based on the G9 and G11 chips and has the HID codepath always attempt to reset the device back to sending standard HID reports. Fixes: https://sourceforge.net/p/linuxwacom/bugs/307/ Fixes: https://sourceforge.net/p/linuxwacom/bugs/310/ Fixes: https://github.com/linuxwacom/input-wacom/issues/15Co-authored-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by:
Jiri Kosina <jkosina@suse.cz> (cherry picked from commit 326ea2a9) Signed-off-by:
Chris J Arges <chris.j.arges@canonical.com> Acked-by:
-
Jason Gerecke authored
BugLink: http://bugs.launchpad.net/bugs/1603975 Commit 5ae6e89f introduced hid_data.inputmode with a comment that it would have the value -1 if undefined, but then forgot to actually perform the initialization. Although this doesn't appear to have caused any problems in practice, it should still be remedied. Signed-off-by:
-
Benjamin Tissoires authored
BugLink: http://bugs.launchpad.net/bugs/1603975 Simplifies the .probe() and will allow to reuse this path in the future. Few things are reshuffled in .probe(): - init wacom struct earlier - then retrieve the report descriptor - then parse it and allocate/register inputs. Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Andy Whitcroft authored
BugLink: http://bugs.launchpad.net/bugs/1604344Signed-off-by:
Andy Whitcroft <apw@canonical.com> Acked-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
- 18 Jul, 2016 10 commits
-
-
Kamal Mostafa authored
BugLink: http://bugs.launchpad.net/bugs/1603483Signed-off-by:
Brad Figg <brad.figg@canonical.com> Acked-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
Kamal Mostafa authored
BugLink: http://bugs.launchpad.net/bugs/1603483Signed-off-by:
-
Kamal Mostafa authored
BugLink: http://bugs.launchpad.net/bugs/1603483Signed-off-by:
-
Kamal Mostafa authored
BugLink: http://bugs.launchpad.net/bugs/1603483Signed-off-by:
-
Kamal Mostafa authored
BugLink: http://bugs.launchpad.net/bugs/1603483Signed-off-by:
-
Kamal Mostafa authored
BugLink: http://bugs.launchpad.net/bugs/1603483Signed-off-by:
-
Huawei SSD DEV Team authoredBugLink: http://bugs.launchpad.net/bugs/1603483 Source: http://support.huawei.com/enterprisesearch/ebgSearch#sp.keyword=HUAWEI%20ES3000%20V2%20Driver%20SRC Huawei SSD device driver Copyright (c) 2016, Huawei Technologies Co., Ltd. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, version 2, as published by the Free Software Foundation. This program is distributed in the hope it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. Signed-off-by:
-
Richard Alpe authored
Fix incorrect use of nla_strlcpy() where the first NLA_HDRLEN bytes of the link name where left out. Making the output of tipc-config -ls look something like: Link statistics: dcast-link 1:data0-1.1.2:data0 1:data0-1.1.3:data0 Also, for the record, the patch that introduce this regression claims "Sending the whole object out can cause a leak". Which isn't very likely as this is a compat layer, where the data we are parsing is generated by us and we know the string to be NULL terminated. But you can of course never be to secure. Fixes: 5d2be142 (tipc: fix an infoleak in tipc_nl_compat_link_dump) Signed-off-by:
Richard Alpe <richard.alpe@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net> (cherry picked from commit 55e77a3e) CVE-2016-5243 BugLink: https://bugs.launchpad.net/bugs/1589036Signed-off-by:
-
Kangjie Lu authored
link_info.str is a char array of size 60. Memory after the NULL byte is not initialized. Sending the whole object out can cause a leak. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Signed-off-by:
-
Dan Carpenter authored
If __key_link_begin() failed then "edit" would be uninitialized. I've added a check to fix that. This allows a random user to crash the kernel, though it's quite difficult to achieve. There are three ways it can be done as the user would have to cause an error to occur in __key_link(): (1) Cause the kernel to run out of memory. In practice, this is difficult to achieve without ENOMEM cropping up elsewhere and aborting the attempt. (2) Revoke the destination keyring between the keyring ID being looked up and it being tested for revocation. In practice, this is difficult to time correctly because the KEYCTL_REJECT function can only be used from the request-key upcall process. Further, users can only make use of what's in /sbin/request-key.conf, though this does including a rejection debugging test - which means that the destination keyring has to be the caller's session keyring in practice. (3) Have just enough key quota available to create a key, a new session keyring for the upcall and a link in the session keyring, but not then sufficient quota to create a link in the nominated destination keyring so that it fails with EDQUOT. The bug can be triggered using option (3) above using something like the following: echo 80 >/proc/sys/kernel/keys/root_maxbytes keyctl request2 user debug:fred negate @t The above sets the quota to something much lower (80) to make the bug easier to trigger, but this is dependent on the system. Note also that the name of the keyring created contains a random number that may be between 1 and 10 characters in size, so may throw the test off by changing the amount of quota used. Assuming the failure occurs, something like the following will be seen: kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h ------------[ cut here ]------------ kernel BUG at ../mm/slab.c:2821! ... RIP: 0010:[<ffffffff811600f9>] kfree_debugcheck+0x20/0x25 RSP: 0018:ffff8804014a7de8 EFLAGS: 00010092 RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000 RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300 RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202 R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001 ... Call Trace: kfree+0xde/0x1bc assoc_array_cancel_edit+0x1f/0x36 __key_link_end+0x55/0x63 key_reject_and_link+0x124/0x155 keyctl_reject_key+0xb6/0xe0 keyctl_negate_key+0x10/0x12 SyS_keyctl+0x9f/0xe7 do_syscall_64+0x63/0x13a entry_SYSCALL64_slow_path+0x25/0x25 Fixes: f70e2e06 ('KEYS: Do preallocation for __key_link()') Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> (cherry picked from commit 38327424) CVE-2016-4470 Signed-off-by:
-
- 15 Jul, 2016 8 commits
-
-
Florian Westphal authored
Ben Hawkes says: integer overflow in xt_alloc_table_info, which on 32-bit systems can lead to small structure allocation and a copy_from_user based heap corruption. Reported-by:
Ben Hawkes <hawkes@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> (cherry picked from commit d157bd76) CVE-2016-3135 BugLink: https://bugs.launchpad.net/bugs/1555353Signed-off-by:
-
Luis Henriques authored
This reverts commit 7da29bde. Dropping this SAUCE patch and replacing it by the upstream fix for CVE-2016-3135: d157bd76 "netfilter: x_tables: check for size overflow" The original fix (being reverted) was modified to keep only the 2nd check. https://marc.info/?l=netfilter-devel&m=145778004016206&w=2Signed-off-by:
-
Roman Kagan authored
The function to update APICv on/off state (in particular, to deactivate it when enabling Hyper-V SynIC) is incomplete: it doesn't adjust APICv-related fields among secondary processor-based VM-execution controls. As a result, Windows 2012 guests get stuck when SynIC-based auto-EOI interrupt intersected with e.g. an IPI in the guest. In addition, the MSR intercept bitmap isn't updated every time "virtualize x2APIC mode" is toggled. This path can only be triggered by a malicious guest, because Windows didn't use x2APIC but rather their own synthetic APIC access MSRs; however a guest running in a SynIC-enabled VM could switch to x2APIC and thus obtain direct access to host APIC MSRs (CVE-2016-4440). The patch fixes those omissions. Signed-off-by:
Roman Kagan <rkagan@virtuozzo.com> Reported-by:
Steve Rutherford <srutherford@google.com> Reported-by:
Yang Zhang <yang.zhang.wz@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 3ce424e4) CVE-2016-4440 BugLink: https://bugs.launchpad.net/bugs/1584192Signed-off-by:
-
Andy Shevchenko authored
BugLink: http://bugs.launchpad.net/bugs/1602579 This is a third approach to workaround long standing issue with LPSS on BayTrail. First one [1] was reverted since it didn't resolve the issue comprehensively. Second one [2] was rejected by internal review. The LPSS DMA controller does not have neither _PS0 nor _PS3 method. Moreover it can be powered off automatically whenever the last LPSS device goes down. In case of no power any access to the DMA controller will hang the system. The behaviour is reproduced on some HP laptops based on Intel BayTrail [3,4] as well as on ASuS T100TA transformer. Power on the LPSS island through the registers accessible in a specific way. [1] http://www.spinics.net/lists/linux-acpi/msg53963.html [2] https://bugzilla.redhat.com/attachment.cgi?id=1066779&action=diff [3] https://bugzilla.redhat.com/show_bug.cgi?id=1184273 [4] http://www.spinics.net/lists/dmaengine/msg01514.htmlSigned-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> (cherry picked from commit eebb3e8d) Signed-off-by:
Hui Wang <hui.wang@canonical.com> Conflicts: arch/x86/include/asm/iosf_mbi.h [To fix the conflicts and guarantee the success of building after applying this patch, I copied _READ and _WRITE definitions from the commit 4077a387 into this patch]. Acked-by:
-
Andy Shevchenko authored
BugLink: http://bugs.launchpad.net/bugs/1602579 We have to call dw_dma_disable() to stop any ongoing transfer. On some platforms we can't do that since DMA device is powered off. Moreover we have no possibility at that point to check if the platform is affected or not. That's why we call pm_runtime_get_sync() / pm_runtime_put() unconditionally. On the other hand we can't use pm_runtime_suspended() because runtime PM framework is not fully used by the driver. Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Allen Hung authored
BugLink: http://bugs.launchpad.net/bugs/1593124 The usage Confidence is mandary to Windows Precision Touchpad devices. If it is examined in input_mapping on a WIndows Precision Touchpad, a new add quirk MT_QUIRK_CONFIDENCE desgned for such devices will be applied to the device. A touch with the confidence bit is not set is determined as invalid. Tested on Dell XPS13 9343 Cc: stable@vger.kernel.org # v4.5+ Reviewed-by:
Allen Hung <allen_hung@dell.com> Signed-off-by:
Phidias Chiang <phidias.chiang@canonical.com> Acked-by:
-
Allen Hung authored
BugLink: http://bugs.launchpad.net/bugs/1593124 This reverts commit 25a84db1 ("HID: multitouch: enable palm rejection if device implements confidence usage") The commit enables palm rejection for Win8 Precision Touchpad devices but the quirk MT_QUIRK_VALID_IS_CONFIDENCE it is using is not working very properly. This quirk is originally designed for some WIn7 touchscreens. Use of this for a Win8 Precision Touchpad will cause unexpected pointer jumping problem. Cc: stable@vger.kernel.org # v4.5+ Reviewed-by:
-
Tedd Ho-Jeong An authored
BugLink: http://bugs.launchpad.net/bugs/1599068 This patch adds support for Intel Bluetooth device 8265 also known as Windstorm Peak (WsP). T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0a2b Rev= 0.10 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> (backported from commit a0af53b5) Signed-off-by:
-
- 13 Jul, 2016 16 commits
-
-
Tejun Heo authored
For non-atomic allocations, pcpu_alloc() can try to extend the area map synchronously after dropping pcpu_lock; however, the extension wasn't synchronized against chunk destruction and the chunk might get freed while extension is in progress. This patch fixes the bug by putting most of non-atomic allocations under pcpu_alloc_mutex to synchronize against pcpu_balance_work which is responsible for async chunk management including destruction. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-and-tested-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Cc: stable@vger.kernel.org # v3.18+ Fixes: 1a4d7607 ("percpu: implement asynchronous chunk population") (cherry picked from commit 6710e594) CVE-2016-4794 BugLink: https://bugs.launchpad.net/bugs/1581871Signed-off-by:
-
Tejun Heo authored
Atomic allocations can trigger async map extensions which is serviced by chunk->map_extend_work. pcpu_balance_work which is responsible for destroying idle chunks wasn't synchronizing properly against chunk->map_extend_work and may end up freeing the chunk while the work item is still in flight. This patch fixes the bug by rolling async map extension operations into pcpu_balance_work. Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1601952Signed-off-by:
-
Steinar H. Gunderson authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit 4879efb3 upstream. dwc3-exynos has two problems during init if the regulators are slow to come up (for instance if the I2C bus driver is not on the initramfs) and return probe deferral. First, every time this happens, the driver leaks the USB phys created; they need to be deallocated on error. Second, since the phy devices are created before the regulators fail, this means that there's a new device to re-trigger deferred probing, which causes it to essentially go into a busy loop of re-probing the device until the regulators come up. Move the phy creation to after the regulators have succeeded, and also fix cleanup on failure. On my ODROID XU4 system (with Debian's initramfs which doesn't contain the I2C driver), this reduces the number of probe attempts (for each of the two controllers) from more than 2000 to eight. Signed-off-by:
Steinar H. Gunderson <sesse@google.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by:
Vivek Gautam <gautam.vivek@samsung.com> Fixes: d720f057 ("usb: dwc3: exynos: add nop transceiver support") Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Thierry Reding authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit f8a15a96 upstream. There are three EHCI controllers on Tegra SoCs, each with its own reset line. However, the first controller contains a set of UTMI configuration registers that are shared with its siblings. These registers will only be reset as part of the first controller's reset. For proper operation it must be ensured that the UTMI configuration registers are reset before any of the EHCI controllers are enabled, irrespective of the probe order. Commit a47cc24c ("USB: EHCI: tegra: Fix probe order issue leading to broken USB") introduced code that ensures the first controller is always reset before setting up any of the controllers, and is never again reset afterwards. This code, however, grabs the wrong reset. Each EHCI controller has two reset controls attached: 1) the USB controller reset and 2) the UTMI pads reset (really the first controller's reset). In order to reset the UTMI pads registers the code must grab the second reset, but instead it grabbing the first. Fixes: a47cc24c ("USB: EHCI: tegra: Fix probe order issue leading to broken USB") Acked-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Bin Liu authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit d246dcb2 upstream. [ 40.467381] ============================================= [ 40.473013] [ INFO: possible recursive locking detected ] [ 40.478651] 4.6.0-08691-g7f3db9a #37 Not tainted [ 40.483466] --------------------------------------------- [ 40.489098] usb/733 is trying to acquire lock: [ 40.493734] (&(&dev->lock)->rlock){-.....}, at: [<bf129288>] ep0_complete+0x18/0xdc [gadgetfs] [ 40.502882] [ 40.502882] but task is already holding lock: [ 40.508967] (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.517811] [ 40.517811] other info that might help us debug this: [ 40.524623] Possible unsafe locking scenario: [ 40.524623] [ 40.530798] CPU0 [ 40.533346] ---- [ 40.535894] lock(&(&dev->lock)->rlock); [ 40.540088] lock(&(&dev->lock)->rlock); [ 40.544284] [ 40.544284] *** DEADLOCK *** [ 40.544284] [ 40.550461] May be due to missing lock nesting notation [ 40.550461] [ 40.557544] 2 locks held by usb/733: [ 40.561271] #0: (&f->f_pos_lock){+.+.+.}, at: [<c02a6114>] __fdget_pos+0x40/0x48 [ 40.569219] #1: (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.578523] [ 40.578523] stack backtrace: [ 40.583075] CPU: 0 PID: 733 Comm: usb Not tainted 4.6.0-08691-g7f3db9a #37 [ 40.590246] Hardware name: Generic AM33XX (Flattened Device Tree) [ 40.596625] [<c010ffbc>] (unwind_backtrace) from [<c010c1bc>] (show_stack+0x10/0x14) [ 40.604718] [<c010c1bc>] (show_stack) from [<c04207fc>] (dump_stack+0xb0/0xe4) [ 40.612267] [<c04207fc>] (dump_stack) from [<c01886ec>] (__lock_acquire+0xf68/0x1994) [ 40.620440] [<c01886ec>] (__lock_acquire) from [<c0189528>] (lock_acquire+0xd8/0x238) [ 40.628621] [<c0189528>] (lock_acquire) from [<c06ad6b4>] (_raw_spin_lock_irqsave+0x38/0x4c) [ 40.637440] [<c06ad6b4>] (_raw_spin_lock_irqsave) from [<bf129288>] (ep0_complete+0x18/0xdc [gadgetfs]) [ 40.647339] [<bf129288>] (ep0_complete [gadgetfs]) from [<bf10a728>] (musb_g_giveback+0x118/0x1b0 [musb_hdrc]) [ 40.657842] [<bf10a728>] (musb_g_giveback [musb_hdrc]) from [<bf108768>] (musb_g_ep0_queue+0x16c/0x188 [musb_hdrc]) [ 40.668772] [<bf108768>] (musb_g_ep0_queue [musb_hdrc]) from [<bf12a944>] (ep0_read+0x544/0x5e0 [gadgetfs]) [ 40.678963] [<bf12a944>] (ep0_read [gadgetfs]) from [<c0284470>] (__vfs_read+0x20/0x110) [ 40.687414] [<c0284470>] (__vfs_read) from [<c0285324>] (vfs_read+0x88/0x114) [ 40.694864] [<c0285324>] (vfs_read) from [<c0286150>] (SyS_read+0x44/0x9c) [ 40.702051] [<c0286150>] (SyS_read) from [<c0107820>] (ret_fast_syscall+0x0/0x1c) This is caused by the spinlock bug in ep0_read(). Fix the two other deadlock sources in gadgetfs_setup() too. Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Sudip Mukherjee authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit dcb21ad4 upstream. parport subsystem has introduced parport_del_port() to delete a port when it is going away. Without parport_del_port() the registered port will not be unregistered. To reproduce and verify the error: Command to be used is : ls /sys/bus/parport/devices 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and the command still shows "parport0". 4) Attach the device again and we get "parport1". With the patch applied: 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and there is no output as "parport0" is now removed. 4) Attach device again to get "parport0" again. Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
-
Mathias Nyman authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit 3425aa03 upstream. If commands timeout we mark them for abortion, then stop the command ring, and turn the commands to no-ops and finally restart the command ring. If the host is working properly the no-op commands will finish and pending completions are called. If we notice the host is failing, driver clears the command ring and completes, deletes and frees all pending commands. There are two separate cases reported where host is believed to work properly but is not. In the first case we successfully stop the ring but no abort or stop command ring event is ever sent and host locks up. The second case is if a host is removed, command times out and driver believes the ring is stopped, and assumes it will be restarted, but actually ends up timing out on the same command forever. If one of the pending commands has the xhci->mutex held it will block xhci_stop() in the remove codepath which otherwise would cleanup pending commands. Add a check that clears all pending commands in case host is removed, or we are stuck timing out on the same command. Also restart the command timeout timer when stopping the command ring to ensure we recive an ring stop/abort event. Tested-by:
Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Hans de Goede authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit d95815ba upstream. I got one of these cards for testing uas with, it seems that with streams it dma-s all over the place, corrupting memory. On my first tests it managed to dma over the BIOS of the motherboard somehow and completely bricked it. Tests on another motherboard show that it does work with streams disabled. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Thomas Petazzoni authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit de95c40d upstream. On some platforms, the clocks might be registered by a platform driver. When this is the case, the clock platform driver may very well be probed after xhci-plat, in which case the first probe() invocation of xhci-plat will receive -EPROBE_DEFER as the return value of devm_clk_get(). The current code handles that as a normal error, and simply assumes that this means that the system doesn't have a clock for the XHCI controller, and continues probing without calling clk_prepare_enable(). Unfortunately, this doesn't work on systems where the XHCI controller does have a clock, but that clock is provided by another platform driver. In order to fix this situation, we handle the -EPROBE_DEFER error condition specially, and abort the XHCI controller probe(). It will be retried later automatically, the clock will be available, devm_clk_get() will succeed, and the probe() will continue with the clock prepared and enabled as expected. In practice, such issue is seen on the ARM64 Marvell 7K/8K platform, where the clocks are registered by a platform driver. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Bin Liu authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit 04471eb8 upstream. Incorrect cppi dma channel is referenced in musb_rx_dma_iso_cppi41(), which causes kernel NULL pointer reference oops later when calling cppi41_dma_channel_program(). Fixes: 069a3fd1 (usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part1) Reported-by:
Matwey V. Kornilov <matwey@sai.msu.ru> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Andrew Goodbody authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit f3eec0cf upstream. shared_fifo endpoints would only get a previous tx state cleared out, the rx state was only cleared for non shared_fifo endpoints Change this so that the rx state is cleared for all endpoints. This addresses an issue that resulted in rx packets being dropped silently. Signed-off-by:
Andrew Goodbody <andrew.goodbody@cambrionix.com> Signed-off-by:
-
Andrew Goodbody authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit 7b2c17f8 upstream. Ensure that the endpoint is stopped by clearing REQPKT before clearing DATAERR_NAKTIMEOUT before rotating the queue on the dedicated bulk endpoint. This addresses an issue where a race could result in the endpoint receiving data before it was reprogrammed resulting in a warning about such data from musb_rx_reinit before it was thrown away. The data thrown away was a valid packet that had been correctly ACKed which meant the host and device got out of sync. Signed-off-by:
-
Bin Liu authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit 84ac5d11 upstream. If the session bit was not set in the backup of devctl register, restoring devctl would clear the session bit. Therefor, only restore devctl register when the session bit was set in the backup. This solves the device enumeration failure in otg mode exposed by commit 56f487c7 (PM / Runtime: Update last_busy in rpm_resume). Signed-off-by:
-
Hans de Goede authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit 32cb0b37 upstream. The Acer C120 LED Projector is a USB-3 connected pico projector which takes both its power and video data from USB-3. In combination with some hubs this device does not play well with lpm, so disable lpm for it. Signed-off-by:
-
Hans de Goede authored
BugLink: http://bugs.launchpad.net/bugs/1601952 commit 81099f97 upstream. Properly sort all the entries by vendor id. Signed-off-by:
-
