- 08 May, 2022 14 commits
-
-
Petr Machata authored
The position of netdevice notifier registration no longer depends on the router initialization, because the event handler no longer dispatches to the router code. Update the comment at the registration to that effect. Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
The events related to IPIP tunnels are handled by the router code. Move the handling from the central dispatcher in spectrum.c to the new notifier handler in the router module. Signed-off-by:
-
Petr Machata authored
The events NETDEV_PRE_CHANGEADDR, NETDEV_CHANGEADDR and NETDEV_CHANGEMTU have implications for in-ASIC router interface objects, and as such are handled in the router module. Move the handling from the central dispatcher in spectrum.c to the new notifier handler in the router module. Signed-off-by:
-
Petr Machata authored
L3 HW stats are implemented in mlxsw as RIF counters, and therefore the code resides in spectrum_router. Exclude the offload xstats events from the mlxsw_sp_netdevice_event_is_router() predicate, and instead recreate the glue code in the router module. Previously, the order of dispatch was that for events on tunnels, a dedicated handler was called, which however did not handle HW stats events. But there is nothing special about tunnel devices as far as HW stats: there is a RIF associated with the tunnel netdevice, and that RIF is where the counter should be installed. Therefore now, HW stats events are tested first, independent of netdevice type. The upshot is that as of this commit, mlxsw supports L3 HW stats work on GRE tunnels. Signed-off-by:
-
Petr Machata authored
Events involving VRF, as L3 concern, are handled in the router code, by the helper mlxsw_sp_netdevice_vrf_event(). The handler is currently invoked from the centralized dispatcher in spectrum.c. Instead, move the call to the newly-introduced router-specific notifier handler. Signed-off-by:
-
Petr Machata authored
Currently all netdevice events are handled in the centralized notifier handler maintained by spectrum.c. Since a number of events are involving router code, spectrum.c needs to dispatch them to spectrum_router.c. The spectrum module therefore needs to know more about the router code than it should have, and there is are several API points through which the two modules communicate. To simplify the notifier handlers, introduce a new notifier into the router module. Signed-off-by:
-
Petr Machata authored
Enslaving netdevices to VRF is currently handled through an mlxsw_sp_is_vrf_event() conditional in mlxsw_sp_netdevice_event(). In the following patch sets, VRF enslavement will be handled purely in the router code. Therefore make handlers of NETDEV_PRECHANGEUPPER tolerant of enslaving to VRF, so that they do not bounce the change. For NETDEV_CHANGEUPPER, drop the WARN_ON(1) and bounce from mlxsw_sp_netdevice_port_vlan_event(). This is the only handler that warned and bounces even in the CHANGEUPPER code, other handler quietly do nothing when they encounter an unfamiliar upper. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net: switch drivers to netif_napi_add_weight() The minority of drivers pass a custom weight to netif_napi_add(). Switch those away to the new netif_napi_add_weight(). All drivers (which can go thru net-next) calling netif_napi_add() will now be calling it with NAPI_POLL_WEIGHT or 64. ==================== Signed-off-by: -
Jakub Kicinski authored
A handful of WAN drivers use custom napi weights, switch them to the new API. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
virtio netdev driver uses a custom napi weight, switch to the new API for setting custom weight. Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jakub Kicinski authored
r8152 uses a custom napi weight, switch to the new API for setting custom weight. Signed-off-by:
-
Jakub Kicinski authored
Switch all Ethernet drivers which use custom napi weights to the new API. Signed-off-by:
-
Jakub Kicinski authored
caif_virtio uses a custom napi weight, switch to the new API for setting custom weights. Signed-off-by:
-
Jakub Kicinski authored
UM's netdev driver uses a custom napi weight, switch to the new API for setting custom weight. Signed-off-by:
-
- 07 May, 2022 5 commits
-
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Simplify migration of host filtered addresses in Felix driver The purpose of this patch set is to remove the functions dsa_port_walk_fdbs() and dsa_port_walk_mdbs() from the DSA core, which were introduced when the Felix driver gained support for unicast filtering on standalone ports. They get called when changing the tagging protocol back and forth between "ocelot" and "ocelot-8021q". I did not realize we could get away without having them. The patch set was regression-tested using the local_termination.sh selftest using both tagging protocols. ==================== Link: https://lore.kernel.org/r/20220505162213.307684-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
All the users of these functions are gone, delete them before they gain new ones. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
The felix driver is the only user of dsa_port_walk_mdbs(), and there isn't even a good reason for it, considering that the host MDB entries are already saved by the ocelot switch lib in the ocelot->multicast list. Rewrite the multicast entry migration procedure around the ocelot->multicast list so we can delete dsa_port_walk_mdbs(). Signed-off-by:
-
Vladimir Oltean authored
I just realized we don't need to migrate the host-filtered FDB entries when the tagging protocol changes from "ocelot" to "ocelot-8021q". Host-filtered addresses are learned towards the PGID_CPU "multicast" port group, reserved by software, which contains BIT(ocelot->num_phys_ports). That is the "special" port entry in the analyzer block for the CPU port module. In "ocelot" mode, the CPU port module's packets are redirected to the NPI port. In "ocelot-8021q" mode, felix_8021q_cpu_port_init() does something funny anyway, and changes PGID_CPU to stop pointing at the CPU port module and start pointing at the physical port where the DSA master is attached. The fact that we can alter the destination of packets learned towards PGID_CPU without altering the MAC table entries themselves means that it is pointless to walk through the FDB entries, forget that they were learned towards PGID_CPU, and re-learn them towards the "unicast" PGID associated with the physical port connected to the DSA master. We can let the PGID_CPU value change simply alter the destination of the host-filtered unicast packets in one fell swoop. Signed-off-by:
-
Vladimir Oltean authored
ocelot_fdb_add() redirects FDB entries installed on the NPI port towards the special reserved PGID_CPU used for host-filtered addresses. PGID_CPU contains BIT(ocelot->num_phys_ports) in the destination port mask, which is code name for the CPU port module. Whereas felix_migrate_fdbs_to_*_port() uses the ocelot->num_phys_ports PGID directly, and it appears that this works too. Even if this PGID is set to zero, apparently its number is special and packets still reach the CPU port module. Nonetheless, in the end, these addresses end up in the same place regardless of whether they go through an extra indirection layer or not. Use PGID_CPU across to have more uniformity. Signed-off-by:
-
- 06 May, 2022 21 commits
-
-
David Thompson authored
This patch increases the polling rate used by the mlxbf_gige driver on the MDIO bus. The previous polling rate was every 100us, and the new rate is every 5us. With this change the amount of time spent waiting for the MDIO BUSY signal to de-assert drops from ~100us to ~27us for each operation. Signed-off-by:
David Thompson <davthompson@nvidia.com> Signed-off-by:
Asmaa Mnebhi <asmaa@nvidia.com> Link: https://lore.kernel.org/r/20220505162309.20050-1-davthompson@nvidia.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== 10GbE Intel Wired LAN Driver Updates 2022-05-05 This series contains updates to ixgbe and igb drivers. Jeff Daly adjusts type for 'allow_unsupported_sfp' to match the associated struct value for ixgbe. Alaa Mohamed converts, deprecated, kmap() call to kmap_local_page() for igb. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igb: Convert kmap() to kmap_local_page() ixgbe: Fix module_param allow_unsupported_sfp type ==================== Link: https://lore.kernel.org/r/20220505155651.2606195-1-anthony.l.nguyen@intel.comSigned-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net: disambiguate the TSO and GSO limits This series separates the device-reported TSO limitations from the user space-controlled GSO limits. It used to be that we only had the former (HW limits) but they were named GSO. This probably lead to confusion and letting user override them. The problem came up in the BIG TCP discussion between Eric and Alex, and seems like something we should address. Targeting net-next because (a) nobody is reporting problems; and (b) there is a tiny but non-zero chance that some actually wants to lift the HW limitations. ==================== Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jakub Kicinski authored
These are now internal to the core, no need to expose them. Signed-off-by:
-
Jakub Kicinski authored
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by:
-
Jakub Kicinski authored
Up until commit 46e6b992 ("rtnetlink: allow GSO maximums to be set on device creation") the gso_max_segs and gso_max_size of a device were not controlled from user space. The quoted commit added the ability to control them because of the following setup: netns A | netns B veth<->veth eth0 If eth0 has TSO limitations and user wants to efficiently forward traffic between eth0 and the veths they should copy the TSO limitations of eth0 onto the veths. This would happen automatically for macvlans or ipvlan but veth users are not so lucky (given the loose coupling). Unfortunately the commit in question allowed users to also override the limits on real HW devices. It may be useful to control the max GSO size and someone may be using that ability (not that I know of any user), so create a separate set of knobs to reliably record the TSO limitations. Validate the user requests. Signed-off-by:
-
Jakub Kicinski authored
To make later patches smaller create a helper for inheriting the TSO limitations of a lower device. The TSO in the name is not an accident, subsequent patches will replace GSO with TSO in more names. Signed-off-by:
-
David S. Miller authored
Simon Horman says: ==================== nfp: flower: decap neighbour table rework Louis Peens says: This patch series reworks the way in which flow rules that outputs to OVS internal ports gets handled by the nfp driver. Previously this made use of a small pre_tun_table, but this only used destination MAC addresses, and made the implicit assumption that there is only a single source MAC":"destination MAC" mapping per tunnel. In hindsight this seems to be a pretty obvious oversight, but this was hidden in plain sight for quite some time. This series changes the implementation to make use of the same Neighbour table for decap that is in use for the tunnel encap solution. It stores any new Neighbour updates in this table. Previously this path was only triggered for encapsulation candidates, and the entries were send and forget, not saved on the host as it is after this series. It also keeps track of any flow rule that outputs to OVS internal ports (and some other criteria not worth mentioning here), very similar to how it was done previously, except now these flows are kept track of in a list. When a new Neighbour entry gets added this list gets iterated for potential matches, in which case the table gets updated with a reference to the flow, and the Neighbour entry on the card gets updated with the relevant host_ctx. The same happens when a new qualifying flow gets added - the Neighbour table gets iterated for applicable matches, and once again the firmware gets updated with the host_ctx when any matches are found. Since this also requires a firmware change we add a new capability bit, and keep the old behaviour in case of older firmware without this bit set. This series starts by doing some preparation, then adding the new list and table entries. Next the functionality to link/unlink these entries are added, and finally this new functionality is enabled by adding the DECAP_V2 bit to the driver feature list. ==================== Signed-off-by: -
Louis Peens authored
Finally enable the decap_v2 feature bit now that all the other bits are in place to configure it correctly. Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Louis Peens authored
With the neighbour entries now stored in a dedicated table there is no use to make use of the tunnel route cache anymore, so remove this. Signed-off-by:
-
Louis Peens authored
Add helper functions that can create links between flow rules and cached neighbour entries. Also add the relevant calls to these functions. * When a new neighbour entry gets added cycle through the saved pre_tun flow list and link any relevant matches. Update the neighbour table on the nfp with this new information. * When a new pre_tun flow rule gets added iterate through the save neighbour entries and link any relevant matches. Once again update the nfp neighbour table with any new links. * Do the inverse when deleting - remove any created links and also inform the nfp of this. Signed-off-by:
-
Louis Peens authored
This patch updates the way in which the tunnel neighbour entries are handled. Previously they were mostly send-and-forget, with just the destination IP's cached in a list. This update changes to a scheme where the neighbour entry information is stored in a hash table. The reason for this is that the neighbour table will now also be used on the decapsulation path, whereas previously it was only used for encapsulation. We need to save more of the neighbour information in order to link them with flower flows in follow up patches. Updating of the neighbour table is now also handled by the same function, instead of separate *_write_neigh_vX functions. Signed-off-by:
-
Louis Peens authored
Prepare for more rework in following patches by updating the existing nfp_neigh_structs. The update allows for the same headers to be used for both old and new firmware, with a slight length adjustment when sending the control message to the firmware. Signed-off-by:
-
Louis Peens authored
When a callback is received to invalidate a neighbour entry there is no need to try and populate any other flow information. Only the flowX->daddr information is needed as lookup key to delete an entry from the NFP neighbour table. Fix this by only doing the lookup if the callback is for a new entry. As part of this cleanup remove the setting of flow6.flowi6_proto, as this is not needed either, it looks to be a possible leftover from a previous implementation. Signed-off-by:
-
Louis Peens authored
Make sure that the rule also matches on source MAC address. On top of that also now save the src and dst MAC addresses similar to how vlan_tci is saved - this will be used in later comparisons with neighbour entries. Indicate if the flow matched on ipv4 or ipv6. Populate the vlan_tpid field that got added to the pre_run_rule struct as well. Signed-off-by:
-
Louis Peens authored
Add calls to add and remove flows to the predt_table. This very simply just allocates and add a new pretun entry if detected as such, and removes it when encountered on a delete flow. Compatibility for older firmware is kept in place through the DECAP_V2 feature bit. Signed-off-by:
-
Louis Peens authored
The previous implementation of using a pre_tun_table for decap has some limitations, causing flows to end up unoffloaded when in fact we are able to offload them. This is because the pre_tun_table does not have enough matching resolution. The next step is to instead make use of the neighbour table which already exists for the encap direction. This patch prepares for this by: - Moving nfp_tun_neigh/_v6 to main.h. - Creating two new "wrapping" structures, one to keep track of neighbour entries (previously they were send-and-forget), and another to keep track of pre_tun flows. - Create a new list in nfp_flower_priv to keep track of pre_tunnel flows - Create a new table in nfp_flower_priv to keep track of next neighbour entries - Initialising and destroying these new list/tables - Extending nfp_fl_payload->pre_tun_rule to save more information for future use. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-05-05 This series contains updates to ice driver only. Wan Jiabing converts an open coded min selection to min_t(). Maciej commonizes on a single find VSI function and removes the duplicated implementation. Wojciech adjusts the return value when exceeding ICE_MAX_CHAIN_WORDS to, a more appropriate, -ENOSPC and allows for the error to be propagated. Michal adds support for ndo_get_devlink_port(). Jake does some cleanup related to virtualization code. Mainly involving function header comments and wording changes. NULL checks are added to ice_get_vf_vsi() calls in order to prevent static analysis tools from complaining that a NULL value could be dereferenced. --- v2: Dropped patch 1: "ice: Add support for classid based queue selection" ==================== Signed-off-by: -
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Improve MPTCP-level window tracking This series improves MPTCP receive window compliance with RFC 8684 and helps increase throughput on high-speed links. Note that patch 3 makes a change in tcp_output.c For the details, Paolo says: I've been chasing bad/unstable performance with multiple subflows on very high speed links. It looks like the root cause is due to the current mptcp-level congestion window handling. There are apparently a few different sub-issues: - the rcv_wnd is not effectively shared on the tx side, as each subflow takes in account only the value received by the underlaying TCP connection. This is addressed in patch 1/5 - The mptcp-level offered wnd right edge is currently allowed to shrink. Reading section 3.3.4.: """ The receive window is relative to the DATA_ACK. As in TCP, a receiver MUST NOT shrink the right edge of the receive window (i.e., DATA_ACK + receive window). The receiver will use the data sequence number to tell if a packet should be accepted at the connection level. """ I read the above as we need to reflect window right-edge tracking on the wire, see patch 4/5. - The offered window right edge tracking can happen concurrently on multiple subflows, but there is no mutex protection. We need an additional atomic operation - still patch 4/5 This series additionally bumps a few new MIBs to track all the above (ensure/observe that the suspected races actually take place). I could not access again the host where the issue was so noticeable, still in the current setup the tput changes from [6-18] Gbps to 19Gbps very stable. ==================== Link: https://lore.kernel.org/r/20220504215408.349318-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Paolo Abeni authored
Track the exceptional handling of MPTCP-level offered window with a few more counters for observability. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
As per RFC, the offered MPTCP-level window should never shrink. While we currently track the right edge, we don't enforce the above constraint on the wire. Additionally, concurrent xmit on different subflows can end-up in erroneous right edge update. Address the above explicitly updating the announced window and protecting the update with an additional atomic operation (sic) Signed-off-by:
-
