- 23 May, 2018 40 commits
-
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit daf70d89 upstream. The __clear_user function is defined to return the number of bytes that could not be cleared. From the underlying memset / bzero implementation this means setting register a2 to that number on return. Currently if a page fault is triggered within the memset_partial block, the value loaded into a2 on return is meaningless. The label .Lpartial_fixup\@ is jumped to on page fault. In order to work out how many bytes failed to copy, the exception handler should find how many bytes left in the partial block (andi a2, STORMASK), add that to the partial block end address (a2), and subtract the faulting address to get the remainder. Currently it incorrectly subtracts the partial block start address (t1), which has additionally been clobbered to generate a jump target in memset_partial. Fix this by adding the block end address instead. This issue was found with the following test code: int j, k; for (j = 0; j < 512; j++) { if ((k = clear_user(NULL, j)) != j) { pr_err("clear_user (NULL %d) returned %d\n", j, k); } } Which now passes on Creator Ci40 (MIPS32) and Cavium Octeon II (MIPS64). Suggested-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19108/Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 8a8158c8 upstream. The MIPS kernel memset / bzero implementation includes a small_memset branch which is used when the region to be set is smaller than a long (4 bytes on 32bit, 8 bytes on 64bit). The current small_memset implementation uses a simple store byte loop to write the destination. There are 2 issues with this implementation: 1. When EVA mode is active, user and kernel address spaces may overlap. Currently the use of the sb instruction means kernel mode addressing is always used and an intended write to userspace may actually overwrite some critical kernel data. 2. If the write triggers a page fault, for example by calling __clear_user(NULL, 2), instead of gracefully handling the fault, an OOPS is triggered. Fix these issues by replacing the sb instruction with the EX() macro, which will emit EVA compatible instuctions as required. Additionally implement a fault fixup for small_memset which sets a2 to the number of bytes that could not be cleared (as defined by __clear_user). Reported-by:
Chuanhua Lei <chuanhua.lei@intel.com> Signed-off-by:
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit b3d7e55c upstream. The micromips implementation of bzero additionally clobbers registers t7 & t8. Specify this in the clobbers list when invoking bzero. Fixes: 26c5e07d ("MIPS: microMIPS: Optimise 'memset' core library function.") Reported-by:
-
Rodrigo Rivas Costa authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit a955358d upstream. Doing `ioctl(HIDIOCGFEATURE)` in a tight loop on a hidraw device and then disconnecting the device, or unloading the driver, can cause a NULL pointer dereference. When a hidraw device is destroyed it sets 0 to `dev->exist`. Most functions check 'dev->exist' before doing its work, but `hidraw_get_report()` was missing that check. Cc: stable@vger.kernel.org Signed-off-by:
Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
David Wang authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit af52f998 upstream. This patch is used to tell kernel that new VIA HDAC controller also support no-snoop path. [ minor coding style fix by tiwai ] Signed-off-by:
David Wang <davidwang@zhaoxin.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 8a56ef4f upstream. Some rawmidi compat ioctls lack of the input substream checks (although they do check only for rfile->output). This many eventually lead to an Oops as NULL substream is passed to the rawmidi core functions. Fix it by adding the proper checks before each function call. The bug was spotted by syzkaller. Reported-by: syzbot+f7a0348affc3b67bc617@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Fabián Inostroza authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 7ecb46e9 upstream. Sending MIDI messages to a PODxt through the USB connection shows "usb_submit_urb failed" in dmesg and the message is not received by the POD. The error is caused because in the funcion send_midi_async() in midi.c there is a call to usb_sndbulkpipe() for endpoint 3 OUT, but the PODxt USB descriptor shows that this endpoint it's an interrupt endpoint. Patch tested with PODxt only. [ The bug has been present from the very beginning in the staging driver time, but Fixes below points to the commit moving to sound/ directory so that the fix can be cleanly applied -- tiwai ] Fixes: 61864d84 ("ALSA: move line6 usb driver into sound/usb") Signed-off-by:
Fabián Inostroza <fabianinostroza@udec.cl> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Theodore Ts'o authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit c755e251 upstream. The xattr_sem deadlock problems fixed in commit 2e81a4ee: "ext4: avoid deadlock when expanding inode size" didn't include the use of xattr_sem in fs/ext4/inline.c. With the addition of project quota which added a new extra inode field, this exposed deadlocks in the inline_data code similar to the ones fixed by 2e81a4ee. The deadlock can be reproduced via: dmesg -n 7 mke2fs -t ext4 -O inline_data -Fq -I 256 /dev/vdc 32768 mount -t ext4 -o debug_want_extra_isize=24 /dev/vdc /vdc mkdir /vdc/a umount /vdc mount -t ext4 /dev/vdc /vdc echo foo > /vdc/a/foo and looks like this: [ 11.158815] [ 11.160276] ============================================= [ 11.161960] [ INFO: possible recursive locking detected ] [ 11.161960] 4.10.0-rc3-00015-g011b30a8a3cf #160 Tainted: G W [ 11.161960] --------------------------------------------- [ 11.161960] bash/2519 is trying to acquire lock: [ 11.161960] (&ei->xattr_sem){++++..}, at: [<c1225a4b>] ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] [ 11.161960] but task is already holding lock: [ 11.161960] (&ei->xattr_sem){++++..}, at: [<c1227941>] ext4_try_add_inline_entry+0x3a/0x152 [ 11.161960] [ 11.161960] other info that might help us debug this: [ 11.161960] Possible unsafe locking scenario: [ 11.161960] [ 11.161960] CPU0 [ 11.161960] ---- [ 11.161960] lock(&ei->xattr_sem); [ 11.161960] lock(&ei->xattr_sem); [ 11.161960] [ 11.161960] *** DEADLOCK *** [ 11.161960] [ 11.161960] May be due to missing lock nesting notation [ 11.161960] [ 11.161960] 4 locks held by bash/2519: [ 11.161960] #0: (sb_writers#3){.+.+.+}, at: [<c11a2414>] mnt_want_write+0x1e/0x3e [ 11.161960] #1: (&type->i_mutex_dir_key){++++++}, at: [<c119508b>] path_openat+0x338/0x67a [ 11.161960] #2: (jbd2_handle){++++..}, at: [<c123314a>] start_this_handle+0x582/0x622 [ 11.161960] #3: (&ei->xattr_sem){++++..}, at: [<c1227941>] ext4_try_add_inline_entry+0x3a/0x152 [ 11.161960] [ 11.161960] stack backtrace: [ 11.161960] CPU: 0 PID: 2519 Comm: bash Tainted: G W 4.10.0-rc3-00015-g011b30a8a3cf #160 [ 11.161960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014 [ 11.161960] Call Trace: [ 11.161960] dump_stack+0x72/0xa3 [ 11.161960] __lock_acquire+0xb7c/0xcb9 [ 11.161960] ? kvm_clock_read+0x1f/0x29 [ 11.161960] ? __lock_is_held+0x36/0x66 [ 11.161960] ? __lock_is_held+0x36/0x66 [ 11.161960] lock_acquire+0x106/0x18a [ 11.161960] ? ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] down_write+0x39/0x72 [ 11.161960] ? ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] ? _raw_read_unlock+0x22/0x2c [ 11.161960] ? jbd2_journal_extend+0x1e2/0x262 [ 11.161960] ? __ext4_journal_get_write_access+0x3d/0x60 [ 11.161960] ext4_mark_inode_dirty+0x17d/0x26d [ 11.161960] ? ext4_add_dirent_to_inline.isra.12+0xa5/0xb2 [ 11.161960] ext4_add_dirent_to_inline.isra.12+0xa5/0xb2 [ 11.161960] ext4_try_add_inline_entry+0x69/0x152 [ 11.161960] ext4_add_entry+0xa3/0x848 [ 11.161960] ? __brelse+0x14/0x2f [ 11.161960] ? _raw_spin_unlock_irqrestore+0x44/0x4f [ 11.161960] ext4_add_nondir+0x17/0x5b [ 11.161960] ext4_create+0xcf/0x133 [ 11.161960] ? ext4_mknod+0x12f/0x12f [ 11.161960] lookup_open+0x39e/0x3fb [ 11.161960] ? __wake_up+0x1a/0x40 [ 11.161960] ? lock_acquire+0x11e/0x18a [ 11.161960] path_openat+0x35c/0x67a [ 11.161960] ? sched_clock_cpu+0xd7/0xf2 [ 11.161960] do_filp_open+0x36/0x7c [ 11.161960] ? _raw_spin_unlock+0x22/0x2c [ 11.161960] ? __alloc_fd+0x169/0x173 [ 11.161960] do_sys_open+0x59/0xcc [ 11.161960] SyS_open+0x1d/0x1f [ 11.161960] do_int80_syscall_32+0x4f/0x61 [ 11.161960] entry_INT80_32+0x2f/0x2f [ 11.161960] EIP: 0xb76ad469 [ 11.161960] EFLAGS: 00000286 CPU: 0 [ 11.161960] EAX: ffffffda EBX: 08168ac8 ECX: 00008241 EDX: 000001b6 [ 11.161960] ESI: b75e46bc EDI: b7755000 EBP: bfbdb108 ESP: bfbdafc0 [ 11.161960] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b Cc: stable@vger.kernel.org # 3.10 (requires 2e81a4ee as a prereq) Reported-by:
George Spelvin <linux@sciencehorizons.net> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 74dae427 upstream. Competing overwrite DIO in dioread_nolock mode will just overwrite pointer to io_end in the inode. This may result in data corruption or extent conversion happening from IO completion interrupt because we don't properly set buffer_defer_completion() when unlocked DIO races with locked DIO to unwritten extent. Since unlocked DIO doesn't need io_end for anything, just avoid allocating it and corrupting pointer from inode for locked DIO. A cleaner fix would be to avoid these games with io_end pointer from the inode but that requires more intrusive changes so we leave that for later. Cc: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Paul Parsons authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 85e290d9 upstream. Two years ago I tried an AMD Radeon E8860 embedded GPU with the drm driver. The dmesg output included driver warnings about an invalid PCIe lane width. Tracking the problem back led to si_set_pcie_lane_width_in_smc(). The calculation of the lane widths via ATOM_PPLIB_PCIE_LINK_WIDTH_MASK and ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT macros did not increment the resulting value, per the comment in pptable.h ("lanes - 1"), and per usage elsewhere. Applying the increment silenced the warnings. The code has not changed since, so either my analysis was incorrect or the bug has gone unnoticed. Hence submitting this as an RFC. Acked-by:
Christian König <christian.koenig@amd.com> Acked-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
Paul Parsons <lost.distance@yahoo.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Theodore Ts'o authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 18db4b4e upstream. If some metadata block, such as an allocation bitmap, overlaps the superblock, it's very likely that if the file system is mounted read/write, the results will not be pretty. So disallow r/w mounts for file systems corrupted in this particular way. Backport notes: 3.18.y is missing bc98a42c ("VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)") and e462ec50 ("VFS: Differentiate mount flags (MS_*) from internal superblock flags") so we simply use the sb MS_RDONLY check from pre bc98a42c in place of the sb_rdonly function used in the upstream variant of the patch. Signed-off-by:
Harsh Shandilya <harsh@prjkt.io> Signed-off-by:
-
Alex Williamson authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit cf0d53ba upstream. MRRS defines the maximum read request size a device is allowed to make. Drivers will often increase this to allow more data transfer with a single request. Completions to this request are bound by the MPS setting for the bus. Aside from device quirks (none known), it doesn't seem to make sense to set an MRRS value less than MPS, yet this is a likely scenario given that user drivers do not have a system-wide view of the PCI topology. Virtualize MRRS such that the user can set MRRS >= MPS, but use MPS as the floor value that we'll write to hardware. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Alex Williamson authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 52318497 upstream. With virtual PCI-Express chipsets, we now see userspace/guest drivers trying to match the physical MPS setting to a virtual downstream port. Of course a lone physical device surrounded by virtual interconnects cannot make a correct decision for a proper MPS setting. Instead, let's virtualize the MPS control register so that writes through to hardware are disallowed. Userspace drivers like QEMU assume they can write anything to the device and we'll filter out anything dangerous. Since mismatched MPS can lead to AER and other faults, let's add it to the kernel side rather than relying on userspace virtualization to handle it. Signed-off-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
-
Alex Williamson authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit ddf9dc0e upstream. We use a BAR restore trick to try to detect when a user has performed a device reset, possibly through FLR or other backdoors, to put things back into a working state. This is important for backdoor resets, but we can actually just virtualize the "front door" resets provided via PCIe and AF FLR. Set these bits as virtualized + writable, allowing the default write to set them in vconfig, then we can simply check the bit, perform an FLR of our own, and clear the bit. We don't actually have the granularity in PCI to specify the type of reset we want to do, but generally devices don't implement both PCIe and AF FLR and we'll favor these over other types of reset, so we should generally lineup. We do test whether the device provides the requested FLR type to stay consistent with hardware capabilities though. This seems to fix several instance of devices getting into bad states with userspace drivers, like dpdk, running inside a VM. Signed-off-by:
Greg Rose <grose@lightfleet.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit e15dc99d upstream. The commit 02a5d692 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write") split the PCM preparation code to a locked version, and it added a sanity check of runtime->oss.prepare flag along with the change. This leaded to an endless loop when the stream gets XRUN: namely, snd_pcm_oss_write3() and co call snd_pcm_oss_prepare() without setting runtime->oss.prepare flag and the loop continues until the PCM state reaches to another one. As the function is supposed to execute the preparation unconditionally, drop the invalid state check there. The bug was triggered by syzkaller. Fixes: 02a5d692 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write") Reported-by: syzbot+150189c103427d31a053@syzkaller.appspotmail.com Reported-by: syzbot+7e3f31a52646f939c052@syzkaller.appspotmail.com Reported-by: syzbot+4f2016cf5185da7759dc@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit f6d297df upstream. The previous fix 40cab6e8 ("ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams") introduced some mutex unbalance; the check of runtime->oss.rw_ref was inserted in a wrong place after the mutex lock. This patch fixes the inconsistency by rewriting with the helper functions to lock/unlock parameters with the stream check. Fixes: 40cab6e8 ("ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 40cab6e8 upstream. OSS PCM stream management isn't modal but it allows ioctls issued at any time for changing the parameters. In the previous hardening patch ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write"), we covered these races and prevent the corruption by protecting the concurrent accesses via params_lock mutex. However, this means that some ioctls that try to change the stream parameter (e.g. channels or format) would be blocked until the read/write finishes, and it may take really long. Basically changing the parameter while reading/writing is an invalid operation, hence it's even more user-friendly from the API POV if it returns -EBUSY in such a situation. This patch adds such checks in the relevant ioctls with the addition of read/write access refcount. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 02a5d692 upstream. Although we apply the params_lock mutex to the whole read and write operations as well as snd_pcm_oss_change_params(), we may still face some races. First off, the params_lock is taken inside the read and write loop. This is intentional for avoiding the too long locking, but it allows the in-between parameter change, which might lead to invalid pointers. We check the readiness of the stream and set up via snd_pcm_oss_make_ready() at the beginning of read and write, but it's called only once, by assuming that it remains ready in the rest. Second, many ioctls that may change the actual parameters (i.e. setting runtime->oss.params=1) aren't protected, hence they can be processed in a half-baked state. This patch is an attempt to plug these holes. The stream readiness check is moved inside the read/write inner loop, so that the stream is always set up in a proper state before further processing. Also, each ioctl that may change the parameter is wrapped with the params_lock for avoiding the races. The issues were triggered by syzkaller in a few different scenarios, particularly the one below appearing as GPF in loopback_pos_update. Reported-by: syzbot+c4227aec125487ec3efa@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit c64ed5dd upstream. Fix the last standing EINTR in the whole subsystem. Use more correct ERESTARTSYS for pending signals. Signed-off-by:
-
Nicholas Mc Guire authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 46325371 upstream. This is an API consolidation only. The use of kmalloc + memset to 0 is equivalent to kzalloc. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
-
Igor Pylypiv authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 977f6f68 upstream. F71808FG_FLAG_WD_EN defines bit position, not a bitmask Signed-off-by:
Igor Pylypiv <igor.pylypiv@gmail.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Mikhail Lappo authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit cf1ba1d7 upstream. When device boots with T > T_trip_1 and requests interrupt, the race condition takes place. The interrupt comes before THERMAL_DEVICE_ENABLED is set. This leads to an attempt to reading sensor value from irq and disabling the sensor, based on the data->mode field, which expected to be THERMAL_DEVICE_ENABLED, but still stays as THERMAL_DEVICE_DISABLED. Afher this issue sensor is never re-enabled, as the driver state is wrong. Fix this problem by setting the 'data' members prior to requesting the interrupts. Fixes: 37713a1e ("thermal: imx: implement thermal alarm interrupt handling") Cc: <stable@vger.kernel.org> Signed-off-by:
Mikhail Lappo <mikhail.lappo@esrlabs.com> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Boris Brezillon authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 75387237 upstream. In order to enable a PLL, not only the PLL has to be powered up and locked, but you also have to de-assert the reset signal. The last part was missing. Add it so PLLs that were not enabled by the FW/bootloader can be enabled from Linux. Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Richard Genoud authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 6a4a4595 upstream. Clearfog boards can come with a CPU clocked at 1600MHz (commercial) or 1333MHz (industrial). They have also some dip-switches to select a different clock (666, 800, 1066, 1200). The funny thing is that the recovery button is on the MPP34 fq selector. So, when booting an industrial board with this button down, the frequency 666MHz is selected (and the kernel didn't boot). This patch add all the missing clocks. The only mode I didn't test is 2GHz (uboot found 4294MHz instead :/ ). Fixes: 0e85aece ("clk: mvebu: add clock support for Armada 380/385") Cc: <stable@vger.kernel.org> # 3.16.x: 9593f4f5: clk: mvebu: armada-38x: add support for 1866MHz variants Cc: <stable@vger.kernel.org> # 3.16.x Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Acked-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
-
Ralph Sennhauser authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 9593f4f5 upstream. The Linksys WRT3200ACM CPU is clocked at 1866MHz. Add 1866MHz to the list of supported CPU frequencies. Also update multiplier and divisor for the l2clk and ddrclk. Noticed by the following warning: [ 0.000000] Selected CPU frequency (16) unsupported Signed-off-by:
Ralph Sennhauser <ralph.sennhauser@gmail.com> Reviewed-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Alex Smith authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit a04f0017 upstream. A spinlock is held while updating the internal copy of the IRQ mask, but not while writing it to the actual IMASK register. After the lock is released, an IRQ can occur before the IMASK register is written. If handling this IRQ causes the mask to be changed, when the handler returns back to the middle of the first mask update, a stale value will be written to the mask register. If this causes an IRQ to become unmasked that cannot have its status cleared by writing a 1 to it in the IREG register, e.g. the SDIO IRQ, then we can end up stuck with the same IRQ repeatedly being fired but not handled. Normally the MMC IRQ handler attempts to clear any unexpected IRQs by writing IREG, but for those that cannot be cleared in this way then the IRQ will just repeatedly fire. This was resulting in lockups after a while of using Wi-Fi on the CI20 (GitHub issue #19). Resolve by holding the spinlock until after the IMASK register has been updated. Cc: stable@vger.kernel.org Link: https://github.com/MIPS/CI20_linux/issues/19 Fixes: 61bfbdb8 ("MMC: Add support for the controller on JZ4740 SoCs.") Tested-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
Alex Smith <alex.smith@imgtec.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Lu Baolu authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit bbe4b3af upstream. A memory block was allocated in intel_svm_bind_mm() but never freed in a failure path. This patch fixes this by free it to avoid memory leakage. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Fixes: 2f26e0a9 ('iommu/vt-d: Add basic SVM PASID support') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Krzysztof Mazur authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 4d1a535b upstream. glibc 2.26 removed the 'struct ucontext' to "improve" POSIX compliance and break programs, including User Mode Linux. Fix User Mode Linux by using POSIX ucontext_t. This fixes: arch/um/os-Linux/signal.c: In function 'hard_handler': arch/um/os-Linux/signal.c:163:22: error: dereferencing pointer to incomplete type 'struct ucontext' mcontext_t *mc = &uc->uc_mcontext; arch/x86/um/stub_segv.c: In function 'stub_segv_handler': arch/x86/um/stub_segv.c:16:13: error: dereferencing pointer to incomplete type 'struct ucontext' &uc->uc_mcontext); Cc: stable@vger.kernel.org Signed-off-by:
Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Maxime Jayat authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit c5637476 upstream. Despite the efforts made to correctly read the NDA and CUBC registers, the order in which the registers are read could sometimes lead to an inconsistent state. Re-using the timeline from the comments, this following timing of registers reads could lead to reading NDA with value "@desc2" and CUBC with value "MAX desc1": INITD -------- ------------ |____________________| _______________________ _______________ NDA @desc2 \/ @desc3 _______________________/\_______________ __________ ___________ _______________ CUBC 0 \/ MAX desc1 \/ MAX desc2 __________/\___________/\_______________ | | | | Events:(1)(2) (3)(4) (1) check_nda = @desc2 (2) initd = 1 (3) cur_ubc = MAX desc1 (4) cur_nda = @desc2 This is allowed by the condition ((check_nda == cur_nda) && initd), despite cur_ubc and cur_nda being in the precise state we don't want. This error leads to incorrect residue computation. Fix it by inversing the order in which CUBC and INITD are read. This makes sure that NDA and CUBC are always read together either _before_ INITD goes to 0 or _after_ it is back at 1. The case where NDA is read before INITD is at 0 and CUBC is read after INITD is back at 1 will be rejected by check_nda and cur_nda being different. Fixes: 53398f48 ("dmaengine: at_xdmac: fix residue corruption") Cc: stable@vger.kernel.org Signed-off-by:
Maxime Jayat <maxime.jayat@mobile-devices.fr> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Bart Van Assche authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 3a148896 upstream. Ensure that cv_end is equal to ibdev->num_comp_vectors for the NUMA node with the highest index. This patch improves spreading of RDMA channels over completion vectors and thereby improves performance, especially on systems with only a single NUMA node. This patch drops support for the comp_vector login parameter by ignoring the value of that parameter since I have not found a good way to combine support for that parameter and automatic spreading of RDMA channels over completion vectors. Fixes: d92c0da7 ("IB/srp: Add multichannel support") Reported-by:
Alexander Schmid <alex@modula-shop-systems.de> Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Alexander Schmid <alex@modula-shop-systems.de> Cc: stable@vger.kernel.org Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Bart Van Assche authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit e68088e7 upstream. Before commit e494f6a7 ("[SCSI] improved eh timeout handler") it did not really matter whether or not abort handlers like srp_abort() called .scsi_done() when returning another value than SUCCESS. Since that commit however this matters. Hence only call .scsi_done() when returning SUCCESS. Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit a820ccbe upstream. The PCM runtime object is created and freed dynamically at PCM stream open / close time. This is tracked via substream->runtime, and it's cleared at snd_pcm_detach_substream(). The runtime object assignment is protected by PCM open_mutex, so for all PCM operations, it's safely handled. However, each PCM substream provides also an ALSA timer interface, and user-space can access to this while closing a PCM substream. This may eventually lead to a UAF, as snd_pcm_timer_resolution() tries to access the runtime while clearing it in other side. Fortunately, it's the only concurrent access from the PCM timer, and it merely reads runtime->timer_resolution field. So, we can avoid the race by reordering kfree() and wrapping the substream->runtime clearance with the corresponding timer lock. Reported-by: syzbot+8e62ff4e07aa2ce87826@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Roland Dreier authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 8435168d upstream. Check to make sure that ctx->cm_id->device is set before we use it. Otherwise userspace can trigger a NULL dereference by doing RDMA_USER_CM_CMD_SET_OPTION on an ID that is not bound to a device. Cc: <stable@vger.kernel.org> Reported-by: <syzbot+a67bc93e14682d92fc2f@syzkaller.appspotmail.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Theodore Ts'o authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 8e4b5eae upstream. If the root directory has an i_links_count of zero, then when the file system is mounted, then when ext4_fill_super() notices the problem and tries to call iput() the root directory in the error return path, ext4_evict_inode() will try to free the inode on disk, before all of the file system structures are set up, and this will result in an OOPS caused by a NULL pointer dereference. This issue has been assigned CVE-2018-1092. https://bugzilla.kernel.org/show_bug.cgi?id=199179 https://bugzilla.redhat.com/show_bug.cgi?id=1560777Reported-by:
Wen Xu <wen.xu@gatech.edu> Signed-off-by:
-
Theodore Ts'o authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 044e6e3d upstream. When reading the inode or block allocation bitmap, if the bitmap needs to be initialized, do not update the checksum in the block group descriptor. That's because we're not set up to journal those changes. Instead, just set the verified bit on the bitmap block, so that it's not necessary to validate the checksum. When a block or inode allocation actually happens, at that point the checksum will be calculated, and update of the bg descriptor block will be properly journalled. Signed-off-by:
-
Theodore Ts'o authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 85e0c4e8 upstream. This updates the jbd2 superblock unnecessarily, and on an abort we shouldn't truncate the log. Signed-off-by:
-
Theodore Ts'o authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 9f886f4d upstream. This fixes a harmless UBSAN where root could potentially end up causing an overflow while bumping the entropy_total field (which is ignored once the entropy pool has been initialized, and this generally is completed during the boot sequence). This is marginal for the stable kernel series, but it's a really trivial patch, and it fixes UBSAN warning that might cause security folks to get overly excited for no reason. Signed-off-by:
Chen Feng <puck.chen@hisilicon.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mika Westerberg authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit f2a659f7 upstream. The driver misses implementation of PM hook that undoes what ->freeze_noirq() does after the hibernation image is created. This means the control channel is not resumed properly and the Thunderbolt bus becomes useless in later stages of hibernation (when the image is stored or if the operation fails). Fix this by pointing ->thaw_noirq to driver nhi_resume_noirq(). This makes sure the control channel is resumed properly. Fixes: 23dd5bb4 ("thunderbolt: Add suspend/hibernate support") Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
James Kelly authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit a01df75c upstream. SSM2602 driver is broken on recent kernels (at least since 4.9). User space applications such as amixer or alsamixer get EIO when attempting to access codec controls via the relevant IOCTLs. Root cause of these failures is the regcache_hw_init function in drivers/base/regmap/regcache.c, which prevents regmap cache initalization from the reg_defaults_raw element of the regmap_config structure when registers are write only. It also disables the regmap cache entirely when all registers are write only or volatile as is the case for the SSM2602 driver. Using the reg_defaults element of the regmap_config structure rather than the reg_defaults_raw element to initalize the regmap cache avoids the logic in the regcache_hw_init function entirely. It also makes this driver consistent with other ASoC codec drivers, as this driver was the ONLY codec driver that used the reg_defaults_raw element to initalize the cache. Tested on Digilent Zybo Z7 development board which has a SSM2603 codec chip connected to a Xilinx Zynq SoC. Signed-off-by:
James Kelly <jamespeterkelly@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Aaron Ma authored
BugLink: http://bugs.launchpad.net/bugs/1768429 commit 6de0b13c upstream. When size is negative, calling memset will make segment fault. Declare the size as type u32 to keep memset safe. size in struct hid_report is unsigned, fix return type of hid_report_len to u32. Cc: stable@vger.kernel.org Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
-
