Pull i2c fixes from Wolfram Sang:
 "I2C has one revert because of a regression, two fixes for tiny race
  windows (which we were not able to trigger), a MAINTAINERS addition,
  and a SPDX fix"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: stm32: Use the correct style for SPDX License Identifier
  i2c: emev2: avoid race when unregistering slave client
  i2c: rcar: avoid race when unregistering slave client
  MAINTAINERS: i2c-imx: take over maintainership
  Revert "i2c: imx: improve the error handling in i2c_imx_dma_request()"

Pull RISC-V fixes from Paul Walmsley:

 - Two patches to fix significant bugs in floating point register
   context handling

 - A minor fix in RISC-V flush_tlb_page(), to supply a valid end address
   to flush_tlb_range()

 - Two minor defconfig additions: to build the virtio hwrng driver by
   default (for QEMU targets), and to partially synchronize the 32-bit
   defconfig with the 64-bit defconfig

* tag 'riscv/for-v5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Make __fstate_clean() work correctly.
  riscv: Correct the initialized flow of FP register
  riscv: defconfig: Update the defconfig
  riscv: rv32_defconfig: Update the defconfig
  riscv: fix flush_tlb_range() end address for flush_tlb_page()

Pull Xtensa fix from Max Filippov:
 "Add missing isync into cpu_reset to make sure ITLB changes are
  effective"

* tag 'xtensa-20190816' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add missing isync to the cpu_reset TLB code

Pull arm64 fixes from Catalin Marinas:

 - Don't taint the kernel if CPUs have different sets of page sizes
   supported (other than the one in use).

 - Issue I-cache maintenance for module ftrace trampoline.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: ftrace: Ensure module ftrace trampoline is coherent with I-side
  arm64: cpufeature: Don't treat granule sizes as strict

The initial support for dynamic ftrace trampolines in modules made use
of an indirect branch which loaded its target from the beginning of
a special section (e71a4e1b ("arm64: ftrace: add support for far
branches to dynamic ftrace")). Since no instructions were being patched,
no cache maintenance was needed. However, later in be0f272b ("arm64:
ftrace: emit ftrace-mod.o contents through code") this code was reworked
to output the trampoline instructions directly into the PLT entry but,
unfortunately, the necessary cache maintenance was overlooked.

Add a call to __flush_icache_range() after writing the new trampoline
instructions but before patching in the branch to the trampoline.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: be0f272b ("arm64: ftrace: emit ftrace-mod.o contents through code")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull power management fixes from Rafael Wysocki:
 "These add a check to avoid recent suspend-to-idle power regression on
  systems with NVMe drives where the PCIe ASPM policy is "performance"
  (or when the kernel is built without ASPM support), fix an issue
  related to frequency limits in the schedutil cpufreq governor and fix
  a mistake related to the PM QoS usage in the cpufreq core introduced
  recently.

  Specifics:

   - Disable NVMe power optimization related to suspend-to-idle added
     recently on systems where PCIe ASPM is not able to put PCIe links
     into low-power states to prevent excess power from being drawn by
     the system while suspended (Rafael Wysocki).

   - Make the schedutil governor handle frequency limits changes
     properly in all cases (Viresh Kumar).

   - Prevent the cpufreq core from treating positive values returned by
     dev_pm_qos_update_request() as errors (Viresh Kumar)"

* tag 'pm-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabled
  PCI/ASPM: Add pcie_aspm_enabled()
  cpufreq: schedutil: Don't skip freq update when limits change
  cpufreq: dev_pm_qos_update_request() can return 1 on success

Pull dmaengine fixes from Vinod Koul:
 "Fixes in dmaengine drivers for:

   - dw-edma: endianess, _iomem type and stack usages

   - ste_dma40: unneeded variable and null-pointer dereference

   - tegra210-adma: unused function

   - omap-dma: off-by-one fix"

* tag 'dmaengine-fix-5.3-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  omap-dma/omap_vout_vrfb: fix off-by-one fi value
  dmaengine: stm32-mdma: Fix a possible null-pointer dereference in stm32_mdma_irq_handler()
  dmaengine: tegra210-adma: Fix unused function warnings
  dmaengine: ste_dma40: fix unneeded variable warning
  dmaengine: dw-edma: fix endianess confusion
  dmaengine: dw-edma: fix __iomem type confusion
  dmaengine: dw-edma: fix unnecessary stack usage

Pull sound fixes from Takashi Iwai:
 "All small fixes targeted for stable:

   - Two fixes for USB-audio with malformed descriptor, spotted by
     fuzzers

   - Two fixes Conexant HD-audio codec wrt power management

   - Quirks for HD-audio AMD platform and HP laptop

   - HD-audio memory leak fix"

* tag 'sound-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Fix a stack buffer overflow bug in check_input_term
  ALSA: usb-audio: Fix an OOB bug in parse_audio_mixer_unit
  ALSA: hda - Add a generic reboot_notify
  ALSA: hda - Let all conexant codec enter D3 when rebooting
  ALSA: hda/realtek - Add quirk for HP Envy x360
  ALSA: hda - Fix a memory leak bug
  ALSA: hda - Apply workaround for another AMD chip 1022:1487

Pull drm fixes from Dave Airlie:
 "Nothing too crazy this week, one amdgpu fix to use vmalloc for a
  struct that grew in size, and another MST fix for nouveau, and some
  other misc fixes:

  i915:
   - single GVT use after free fix

  scheduler:
   - entity destruction race fix

  amdgpu:
   - struct allocation fix
   - gfx9 soft recovery fix

  nouveau:
   - followup MST fix

  ast:
   - vga register race fix"

* tag 'drm-fixes-2019-08-16' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau: Only recalculate PBN/VCPI on mode/connector changes
  drm/ast: Fixed reboot test may cause system hanged
  drm/scheduler: use job count instead of peek
  drm/amd/display: use kvmalloc for dc_state (v2)
  drm/amdgpu: fix gfx9 soft recovery
  drm/i915: Use after free in error path in intel_vgpu_create_workload()

* pm-cpufreq:
  cpufreq: schedutil: Don't skip freq update when limits change
  cpufreq: dev_pm_qos_update_request() can return 1 on success

Merge tag 'drm-intel-fixes-2019-08-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.4-rc5:
- GVT use-after-free fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zhkag9ic.fsf@intel.com

`check_input_term` recursively calls itself with input from
device side (e.g., uac_input_terminal_descriptor.bCSourceID)
as argument (id). In `check_input_term`, if `check_input_term`
is called with the same `id` argument as the caller, it triggers
endless recursive call, resulting kernel space stack overflow.

This patch fixes the bug by adding a bitmap to `struct mixer_build`
to keep track of the checked ids and stop the execution if some id
has been checked (similar to how parse_audio_unit handles unitid
argument).
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Hui Peng <benquike@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull xfs fixes from Darrick Wong:

 - Fix crashes when the attr fork isn't present due to errors but inode
   inactivation tries to zap the attr data anyway.

 - Convert more directory corruption debugging asserts to actual
   EFSCORRUPTED returns instead of blowing up later on.

 - Don't fail writeback just because we ran out of memory allocating
   metadata log data.

* tag 'xfs-5.3-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: don't crash on null attr fork xfs_bmapi_read
  xfs: remove more ondisk directory corruption asserts
  fs: xfs: xfs_log: Don't use KM_MAYFAIL at xfs_log_reserve().

Pull iomap fixlet from Darrick Wong:
 "A single update to the MAINTAINERS entry for iomap now that we've
  removed fs/iomap.c"

* tag 'iomap-5.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  MAINTAINERS: iomap: Remove fs/iomap.c record

Pull auxdisplay fixes from Miguel Ojeda:
 "A few minor auxdisplay improvements:

   - A couple of small header cleanups for charlcd (Masahiro Yamada)

   - A trivial typo fix for the examples of cfag12864b (Masahiro Yamada)

   - An Kconfig help text improvement for charlcd (Mans Rullgard)

   - An error path fix for panel (zhengbin)"

* tag 'auxdisplay-for-linus-v5.3-rc5' of git://github.com/ojeda/linux:
  auxdisplay: Fix a typo in cfag12864b-example.c
  auxdisplay: charlcd: add include guard to charlcd.h
  auxdisplay: charlcd: move charlcd.h to drivers/auxdisplay
  auxdisplay: charlcd: add help text for backlight initial state
  auxdisplay: panel: need to delete scan_timer when misc_register fails in panel_attach

Pull devicetree fixes from Rob Herring:

 - Fix building DT binding examples for in tree builds

 - Correct some refcounting in adjust_local_phandle_references()

 - Update FSL FEC binding with deprecated properties

 - Schema fix in stm32 pinctrl

 - Fix typo in of_irq_parse_one docbook comment

* tag 'devicetree-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: irq: fix a trivial typo in a doc comment
  dt-bindings: pinctrl: stm32: Fix 'st,syscfg' schema
  dt-bindings: fec: explicitly mark deprecated properties
  of: resolver: Add of_node_put() before return and break
  dt-bindings: Fix generated example files getting added to schemas

drm-fixes-5.3-2019-08-14:

amdgpu:
- Use kvalloc for dc_state to avoid allocation
  failures in some cases.
- Fix gfx9 soft recovery

scheduler:
- Fix a race condition when destroying entities
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815024919.3434-1-alexander.deucher@amd.com

I -thought- I had fixed this entirely, but it looks like that I didn't
test this thoroughly enough as we apparently still make one big mistake
with nv50_msto_atomic_check() - we don't handle the following scenario:

* CRTC #1 has n VCPI allocated to it, is attached to connector DP-4
  which is attached to encoder #1. enabled=y active=n
* CRTC #1 is changed from DP-4 to DP-5, causing:
  * DP-4 crtc=#1→NULL (VCPI n→0)
  * DP-5 crtc=NULL→#1
  * CRTC #1 steals encoder #1 back from DP-4 and gives it to DP-5
  * CRTC #1 maintains the same mode as before, just with a different
    connector
* mode_changed=n connectors_changed=y
  (we _SHOULD_ do VCPI 0→n here, but don't)

Once the above scenario is repeated once, we'll attempt freeing VCPI
from the connector that we didn't allocate due to the connectors
changing, but the mode staying the same. Sigh.

Since nv50_msto_atomic_check() has broken a few times now, let's rethink
things a bit to be more careful: limit both VCPI/PBN allocations to
mode_changed || connectors_changed, since neither VCPI or PBN should
ever need to change outside of routing and mode changes.

Changes since v1:
* Fix accidental reversal of clock and bpp arguments in
  drm_dp_calc_pbn_mode() - William Lewis
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reported-by: Bohdan Milar <bmilar@redhat.com>
Tested-by: Bohdan Milar <bmilar@redhat.com>
Fixes: 232c9eec ("drm/nouveau: Use atomic VCPI helpers for MST")
References: 412e85b6 ("drm/nouveau: Only release VCPI slots on mode changes")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <stable@vger.kernel.org> # v5.1+
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809005307.18391-1-lyude@redhat.com

There is another thread still access standard VGA I/O while loading drm driver.
Disable standard VGA I/O decode to avoid this issue.
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523410059-18415-1-git-send-email-yc_chen@aspeedtech.com

Diverged from what the code does with commit 530210c7 ("of/irq: Replace
of_irq with of_phandle_args").
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>

The proper way to add additional contraints to an existing json-schema
is using 'allOf' to reference the base schema. Using just '$ref' doesn't
work. Fix this for the 'st,syscfg' property.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Merge tag 'Wimplicit-fallthrough-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull fallthrough fixes from Gustavo A. R. Silva:
 "Fix sh mainline builds:

   - Fix fall-through warning in sh.

   - Fix missing break bug in sh (this is a 10-year-old bug)

  Currently, mainline builds for sh are broken. These patches fix that"

* tag 'Wimplicit-fallthrough-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  sh: kernel: hw_breakpoint: Fix missing break in switch statement
  sh: kernel: disassemble: Mark expected switch fall-throughs

Pull afs fixes from David Howells:

 - Fix the CB.ProbeUuid handler to generate its reply correctly.

 - Fix a mix up in indices when parsing a Volume Location entry record.

 - Fix a potential NULL-pointer deref when cleaning up a read request.

 - Fix the expected data version of the destination directory in
   afs_rename().

 - Fix afs_d_revalidate() to only update d_fsdata if it's not the same
   as the directory data version to reduce the likelihood of overwriting
   the result of a competing operation. (d_fsdata carries the directory
   DV or the least-significant word thereof).

 - Fix the tracking of the data-version on a directory and make sure
   that dentry objects get properly initialised, updated and
   revalidated.

   Also fix rename to update d_fsdata to match the new directory's DV if
   the dentry gets moved over and unhash the dentry to stop
   afs_d_revalidate() from interfering.

* tag 'afs-fixes-20190814' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix missing dentry data version updating
  afs: Only update d_fsdata if different in afs_d_revalidate()
  afs: Fix off-by-one in afs_rename() expected data version calculation
  fs: afs: Fix a possible null-pointer dereference in afs_put_read()
  afs: Fix loop index mixup in afs_deliver_vl_get_entry_by_name_u()
  afs: Fix the CB.ProbeUuid service handler to reply correctly

The spsc_queue_peek function is accessing queue->head which belongs to
the consumer thread and shouldn't be accessed by the producer

This is fixing a rare race condition when destroying entities.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Monk.liu@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Make the __fstate_clean() function correctly set the
state of sstatus.FS in pt_regs to SR_FS_CLEAN.

Fixes: 7db91e57 ("RISC-V: Task implementation")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[paul.walmsley@sifive.com: expanded "Fixes" commit ID]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

  The following two reasons cause FP registers are sometimes not
initialized before starting the user program.
1. Currently, the FP context is initialized in flush_thread() function
   and we expect these initial values to be restored to FP register when
   doing FP context switch. However, the FP context switch only occurs in
   switch_to function. Hence, if this process does not be scheduled out
   and scheduled in before entering the user space, the FP registers
   have no chance to initialize.
2. In flush_thread(), the state of reg->sstatus.FS inherits from the
   parent. Hence, the state of reg->sstatus.FS may be dirty. If this
   process is scheduled out during flush_thread() and initializing the
   FP register, the fstate_save() in switch_to will corrupt the FP context
   which has been initialized until flush_thread().

  To solve the 1st case, the initialization of the FP register will be
completed in start_thread(). It makes sure all FP registers are initialized
before starting the user program. For the 2nd case, the state of
reg->sstatus.FS in start_thread will be set to SR_FS_OFF to prevent this
process from corrupting FP context in doing context save. The FP state is
set to SR_FS_INITIAL in start_trhead().
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 7db91e57 ("RISC-V: Task implementation")
Cc: stable@vger.kernel.org
[paul.walmsley@sifive.com: fixed brace alignment issue reported by
 checkpatch]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

Pull rdma fixes from Doug Ledford:
 "Fairly small pull request for -rc3. I'm out of town the rest of this
  week, so I made sure to clean out as much as possible from patchworks
  in enough time for 0-day to chew through it (Yay! for 0-day being back
  online! :-)). Jason might send through any emergency stuff that could
  pop up, otherwise I'm back next week.

  The only real thing of note is the siw ABI change. Since we just
  merged siw *this* release, there are no prior kernel releases to
  maintain kernel ABI with. I told Bernard that if there is anything
  else about the siw ABI he thinks he might want to change before it
  goes set in stone, he should get it in ASAP. The siw module was around
  for several years outside the kernel tree, and it had to be revamped
  considerably for inclusion upstream, so we are making no attempts to
  be backward compatible with the out of tree version. Once 5.3 is
  actually released, we will have our baseline ABI to maintain.

  Summary:

   - Fix a memory registration release flow issue that was causing a
     WARN_ON (mlx5)

   - If the counters for a port aren't allocated, then we can't do
     operations on the non-existent counters (core)

   - Check the right variable for error code result (mlx5)

   - Fix a use after free issue (mlx5)

   - Fix an off by one memory leak (siw)

   - Actually return an error code on error (core)

   - Allow siw to be built on 32bit arches (siw, ABI change, but OK
     since siw was just merged this merge window and there is no prior
     released kernel to maintain compatibility with and we also updated
     the rdma-core user space package to match)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/siw: Change CQ flags from 64->32 bits
  RDMA/core: Fix error code in stat_get_doit_qp()
  RDMA/siw: Fix a memory leak in siw_init_cpulist()
  IB/mlx5: Fix use-after-free error while accessing ev_file pointer
  IB/mlx5: Check the correct variable in error handling code
  RDMA/counter: Prevent QP counter binding if counters unsupported
  IB/mlx5: Fix implicit MR release flow

The `uac_mixer_unit_descriptor` shown as below is read from the
device side. In `parse_audio_mixer_unit`, `baSourceID` field is
accessed from index 0 to `bNrInPins` - 1, the current implementation
assumes that descriptor is always valid (the length  of descriptor
is no shorter than 5 + `bNrInPins`). If a descriptor read from
the device side is invalid, it may trigger out-of-bound memory
access.

```
struct uac_mixer_unit_descriptor {
	__u8 bLength;
	__u8 bDescriptorType;
	__u8 bDescriptorSubtype;
	__u8 bUnitID;
	__u8 bNrInPins;
	__u8 baSourceID[];
}
```

This patch fixes the bug by add a sanity check on the length of
the descriptor.
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull dma-mapping fixes from Christoph Hellwig:

 - fix the handling of the bus_dma_mask in dma_get_required_mask, which
   caused a regression in this merge window (Lucas Stach)

 - fix a regression in the handling of DMA_ATTR_NO_KERNEL_MAPPING (me)

 - fix dma_mmap_coherent to not cause page attribute mismatches on
   coherent architectures like x86 (me)

* tag 'dma-mapping-5.3-4' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: fix page attributes for dma_mmap_*
  dma-direct: don't truncate dma_required_mask to bus addressing capabilities
  dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING

Pull iommu fixes from Joerg Roedel:

 - A couple more fixes for the Intel VT-d driver for bugs introduced
   during the recent conversion of this driver to use IOMMU core default
   domains.

 - Fix for common dma-iommu code to make sure MSI mappings happen in the
   correct domain for a device.

 - Fix a corner case in the handling of sg-lists in dma-iommu code that
   might cause dma_length to be truncated.

 - Mark a switch as fall-through in arm-smmu code.

* tag 'iommu-fixes-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix possible use-after-free of private domain
  iommu/vt-d: Detach domain before using a private one
  iommu/dma: Handle SG length overflow better
  iommu/vt-d: Correctly check format of page table in debugfs
  iommu/vt-d: Detach domain when move device out of group
  iommu/arm-smmu: Mark expected switch fall-through
  iommu/dma: Handle MSI mappings separately

Merge misc VM fixes from Andrew Morton:
 "A bunch of hotfixes, all affecting mm/.

  The two-patch series from Andrea may be controversial. This restores
  patches which were reverted in Dec 2018 due to a regression report [*].

  After extensive discussion it is evident that the problems which these
  patches solved were significantly more serious than the problems they
  introduced. I am told that major distros are already carrying these
  two patches for this reason"

[*] See

      https://lore.kernel.org/lkml/alpine.DEB.2.21.1812061343240.144733@chino.kir.corp.google.com/
      https://lore.kernel.org/lkml/alpine.DEB.2.21.1812031545560.161134@chino.kir.corp.google.com/

  for the google-specific issues brought up by David Rijentes. And as
  Andrew says:

    "I'm unaware of anyone else who will be adversely affected by this,
     and google already carries over a thousand kernel patches - another
     won't kill them.

     There has been sporadic discussion about fixing these things for
     real but it's clear that nobody apart from David is particularly
     motivated"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  hugetlbfs: fix hugetlb page migration/fault race causing SIGBUS
  mm, vmscan: do not special-case slab reclaim when watermarks are boosted
  Revert "mm, thp: restore node-local hugepage allocations"
  Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask""
  include/asm-generic/5level-fixup.h: fix variable 'p4d' set but not used
  seq_file: fix problem when seeking mid-record
  mm: workingset: fix vmstat counters for shadow nodes
  mm/usercopy: use memory range to be accessed for wraparound check
  mm: kmemleak: disable early logging in case of error
  mm/vmalloc.c: fix percpu free VM area search criteria
  mm/memcontrol.c: fix use after free in mem_cgroup_iter()
  mm/z3fold.c: fix z3fold_destroy_pool() race condition
  mm/z3fold.c: fix z3fold_destroy_pool() ordering
  mm: mempolicy: handle vma with unmovable pages mapped correctly in mbind
  mm: mempolicy: make the behavior consistent when MPOL_MF_MOVE* and MPOL_MF_STRICT were specified
  mm/hmm: fix bad subpage pointer in try_to_unmap_one
  mm/hmm: fix ZONE_DEVICE anon page mapping reuse
  mm: document zone device struct page field usage

This patch corrects the SPDX License Identifier style
in header file related to STM32 Driver for I2C hardware
bus support.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

After we disabled interrupts, there might still be an active one
running. Sync before clearing the pointer to the slave device.

Fixes: c31d0a00 ("i2c: emev2: add slave support")
Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

After we disabled interrupts, there might still be an active one
running. Sync before clearing the pointer to the slave device.

Fixes: de20d185 ("i2c: rcar: add slave support")
Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

I would like to maintain the i2c-imx driver. Since I work with
different i.MX variants and have access to the hardware, I can spend
some time on the reviewing of this driver.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Since commit e1ab9a46 ("i2c: imx: improve the error handling in
i2c_imx_dma_request()") when booting with the DMA driver as module (such
as CONFIG_FSL_EDMA=m) the following endless clk warnings are seen:

[  153.077831] ------------[ cut here ]------------
[  153.082528] WARNING: CPU: 0 PID: 15 at drivers/clk/clk.c:924 clk_core_disable_lock+0x18/0x24
[  153.093077] i2c0 already disabled
[  153.096416] Modules linked in:
[  153.099521] CPU: 0 PID: 15 Comm: kworker/0:1 Tainted: G        W         5.2.0+ #321
[  153.107290] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
[  153.113772] Workqueue: events deferred_probe_work_func
[  153.118979] [<c0019560>] (unwind_backtrace) from [<c0014734>] (show_stack+0x10/0x14)
[  153.126778] [<c0014734>] (show_stack) from [<c083f8dc>] (dump_stack+0x9c/0xd4)
[  153.134051] [<c083f8dc>] (dump_stack) from [<c0031154>] (__warn+0xf8/0x124)
[  153.141056] [<c0031154>] (__warn) from [<c0031248>] (warn_slowpath_fmt+0x38/0x48)
[  153.148580] [<c0031248>] (warn_slowpath_fmt) from [<c040fde0>] (clk_core_disable_lock+0x18/0x24)
[  153.157413] [<c040fde0>] (clk_core_disable_lock) from [<c058f520>] (i2c_imx_probe+0x554/0x6ec)
[  153.166076] [<c058f520>] (i2c_imx_probe) from [<c04b9178>] (platform_drv_probe+0x48/0x98)
[  153.174297] [<c04b9178>] (platform_drv_probe) from [<c04b7298>] (really_probe+0x1d8/0x2c0)
[  153.182605] [<c04b7298>] (really_probe) from [<c04b7554>] (driver_probe_device+0x5c/0x174)
[  153.190909] [<c04b7554>] (driver_probe_device) from [<c04b58c8>] (bus_for_each_drv+0x44/0x8c)
[  153.199480] [<c04b58c8>] (bus_for_each_drv) from [<c04b746c>] (__device_attach+0xa0/0x108)
[  153.207782] [<c04b746c>] (__device_attach) from [<c04b65a4>] (bus_probe_device+0x88/0x90)
[  153.215999] [<c04b65a4>] (bus_probe_device) from [<c04b6a04>] (deferred_probe_work_func+0x60/0x90)
[  153.225003] [<c04b6a04>] (deferred_probe_work_func) from [<c004f190>] (process_one_work+0x204/0x634)
[  153.234178] [<c004f190>] (process_one_work) from [<c004f618>] (worker_thread+0x20/0x484)
[  153.242315] [<c004f618>] (worker_thread) from [<c0055c2c>] (kthread+0x118/0x150)
[  153.249758] [<c0055c2c>] (kthread) from [<c00090b4>] (ret_from_fork+0x14/0x20)
[  153.257006] Exception stack(0xdde43fb0 to 0xdde43ff8)
[  153.262095] 3fa0:                                     00000000 00000000 00000000 00000000
[  153.270306] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  153.278520] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  153.285159] irq event stamp: 3323022
[  153.288787] hardirqs last  enabled at (3323021): [<c0861c4c>] _raw_spin_unlock_irq+0x24/0x2c
[  153.297261] hardirqs last disabled at (3323022): [<c040d7a0>] clk_enable_lock+0x10/0x124
[  153.305392] softirqs last  enabled at (3322092): [<c000a504>] __do_softirq+0x344/0x540
[  153.313352] softirqs last disabled at (3322081): [<c00385c0>] irq_exit+0x10c/0x128
[  153.320946] ---[ end trace a506731ccd9bd703 ]---

This endless clk warnings behaviour is well explained by Andrey Smirnov:

"Allocating DMA after registering I2C adapter can lead to infinite
probing loop, for example, consider the following scenario:

    1. i2c_imx_probe() is called and successfully registers an I2C
       adapter via i2c_add_numbered_adapter()

    2. As a part of i2c_add_numbered_adapter() new I2C slave devices
       are added from DT which results in a call to
       driver_deferred_probe_trigger()

    3. i2c_imx_probe() continues and calls i2c_imx_dma_request() which
       due to lack of proper DMA driver returns -EPROBE_DEFER

    4. i2c_imx_probe() fails, removes I2C adapter and returns
       -EPROBE_DEFER, which places it into deferred probe list

    5. Deferred probe work triggered in #2 above kicks in and calls
       i2c_imx_probe() again thus bringing us to step #1"

So revert commit e1ab9a46 ("i2c: imx: improve the error handling in
i2c_imx_dma_request()") and restore the old behaviour, in order to
avoid regressions on existing setups.

Cc: <stable@vger.kernel.org>
Reported-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: e1ab9a46 ("i2c: imx: improve the error handling in i2c_imx_dma_request()")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Make codec enter D3 before rebooting or poweroff can fix the noise
issue on some laptops. And in theory it is harmless for all codecs
to enter D3 before rebooting or poweroff, let us add a generic
reboot_notify, then realtek and conexant drivers can call this
function.

Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

We have 3 new lenovo laptops which have conexant codec 0x14f11f86,
these 3 laptops also have the noise issue when rebooting, after
letting the codec enter D3 before rebooting or poweroff, the noise
disappers.

Instead of adding a new ID again in the reboot_notify(), let us make
this function apply to all conexant codec. In theory make codec enter
D3 before rebooting or poweroff is harmless, and I tested this change
on a couple of other Lenovo laptops which have different conexant
codecs, there is no side effect so far.

Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Update the defconfig:
 - Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable
   VirtIORNG when running on QEMU
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

Update the rv32_defconfig:
 - Add 'CONFIG_DEVTMPFS_MOUNT=y' to match the RISC-V defconfig
 - Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable
   VirtIORNG when running on QEMU
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>