Starting with upstream Rust commit a5e3a3f9b6bd ("move
`manual_c_str_literals` to complexity"), to be released in Rust 1.83.0
[1], Clippy now warns on `manual_c_str_literals` by default, e.g.:

    error: manually constructing a nul-terminated string
      --> rust/kernel/kunit.rs:21:13
       |
    21 |             b"\x013%pA\0".as_ptr() as _,
       |             ^^^^^^^^^^^^^ help: use a `c""` literal: `c"\x013%pA"`
       |
       = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_c_str_literals
       = note: `-D clippy::manual-c-str-literals` implied by `-D warnings`
       = help: to override `-D warnings` add `#[allow(clippy::manual_c_str_literals)]`

Apply the suggestion to clean up the warnings.

Link: https://github.com/rust-lang/rust-clippy/pull/13263 [1]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240927164414.560906-1-ojeda@kernel.orgSigned-off-by: Miguel Ojeda <ojeda@kernel.org>

There is a bug in the LLVM implementation of KASAN and GCOV that makes
these options incompatible with the CFI_ICALL_NORMALIZE_INTEGERS option.

The bug has already been fixed in llvm/clang [1] and rustc [2]. However,
Kconfig currently has no way to gate features on the LLVM version inside
rustc, so we cannot write down a precise `depends on` clause in this
case. Instead, a `def_bool` option is defined for whether
CFI_ICALL_NORMALIZE_INTEGERS is available, and its default value is set
to false when GCOV or KASAN are turned on. End users using a patched
clang/rustc can turn on the HAVE_CFI_ICALL_NORMALIZE_INTEGERS option
directly to override this.

An alternative solution is to inspect a binary created by clang or rustc
to see whether the faulty CFI tags are in the binary. This would be a
precise check, but it would involve hard-coding the *hashed* version of
the CFI tag. This is because there's no way to get clang or rustc to
output the unhased version of the CFI tag. Relying on the precise
hashing algorithm using by CFI seems too fragile, so I have not pursued
this option. Besides, this kind of hack is exactly what lead to the LLVM
bug in the first place.

If the CFI_ICALL_NORMALIZE_INTEGERS option is used without CONFIG_RUST,
then we actually can perform a precise check today: just compare the
clang version number. This works since clang and llvm are always updated
in lockstep. However, encoding this in Kconfig would give the
HAVE_CFI_ICALL_NORMALIZE_INTEGERS option a dependency on CONFIG_RUST,
which is not possible as the reverse dependency already exists.

HAVE_CFI_ICALL_NORMALIZE_INTEGERS is defined to be a `def_bool` instead
of `bool` to avoid asking end users whether they want to turn on the
option. Turning it on explicitly is something only experts should do, so
making it hard to do so is not an issue.

I added a `depends on CFI_CLANG` clause to the new Kconfig option. I'm
not sure whether that makes sense or not, but it doesn't seem to make a
big difference.

In a future kernel release, I would like to add a Kconfig option similar
to CLANG_VERSION/RUSTC_VERSION for inspecting the version of the LLVM
inside rustc. Once that feature lands, this logic will be replaced with
a precise version check. This check is not being introduced here to
avoid introducing a new _VERSION constant in a fix.

Link: https://github.com/llvm/llvm-project/pull/104826 [1]
Link: https://github.com/rust-lang/rust/pull/129373 [2]
Fixes: ce4a2620 ("cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409231044.4f064459-oliver.sang@intel.comSigned-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20240925-cfi-norm-kasan-fix-v1-1-0328985cdf33@google.comSigned-off-by: Miguel Ojeda <ojeda@kernel.org>

When enabling both KASAN and RETHUNK, objtool emits the following
warnings:

    rust/core.o: warning: objtool: asan.module_ctor+0x13: 'naked' return found in MITIGATION_RETHUNK build
    rust/core.o: warning: objtool: asan.module_dtor+0x13: 'naked' return found in MITIGATION_RETHUNK build

This is caused by the -Zfunction-return=thunk-extern flag in rustc not
informing LLVM about the mitigation at the module level (it does so at
the function level only currently, which covers most cases, but both
are required), which means that the KASAN functions asan.module_ctor
and asan.module_dtor are generated without the rethunk mitigation.

The other mitigations that we enabled for Rust (SLS, RETPOLINE) do not
have the same bug, as they're being applied through the target-feature
functionality instead.

This is being fixed for rustc 1.83.0, so update Kconfig to reject this
configuration on older compilers.

Link: https://github.com/rust-lang/rust/pull/130824
Fixes: d7868550 ("x86/rust: support MITIGATION_RETHUNK")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://lore.kernel.org/all/CANiq72myZL4_poCMuNFevtpYYc0V0embjSuKb7y=C+m3vVA_8g@mail.gmail.com/Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240926093849.1192264-1-aliceryhl@google.com
[ Reworded to add the details mentioned in the list. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

The `-Zpatchable-function-entry` flag is available since Rust
1.81.0, not Rust 1.80.0, i.e. commit ac7595fdb1ee ("Support for -Z
patchable-function-entry") in upstream Rust.

Fixes: ca627e63 ("rust: cfi: add support for CFI_CLANG with Rust")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20240925141944.277936-1-ojeda@kernel.orgSigned-off-by: Miguel Ojeda <ojeda@kernel.org>

In case CONFIG_PREEMPT_RT is enabled __mutex_init() becomes a macro
instead of an extern function (simplified from
include/linux/mutex.h):

    #ifndef CONFIG_PREEMPT_RT
    extern void __mutex_init(struct mutex *lock, const char *name,
    			 struct lock_class_key *key);
    #else
    #define __mutex_init(mutex, name, key)		\
    do {						\
	rt_mutex_base_init(&(mutex)->rtmutex);		\
    	__mutex_rt_init((mutex), name, key);		\
    } while (0)
    #endif

The macro isn't resolved by bindgen, then. What results in a build
error:

error[E0425]: cannot find function `__mutex_init` in crate `bindings`
     --> rust/kernel/sync/lock/mutex.rs:104:28
      |
104   |           unsafe { bindings::__mutex_init(ptr, name, key) }
      |                              ^^^^^^^^^^^^ help: a function with a similar name exists: `__mutex_rt_init`
      |
     ::: rust/bindings/bindings_generated.rs:23722:5
      |
23722 | /     pub fn __mutex_rt_init(
23723 | |         lock: *mut mutex,
23724 | |         name: *const core::ffi::c_char,
23725 | |         key: *mut lock_class_key,
23726 | |     );
      | |_____- similarly named function `__mutex_rt_init` defined here

Fix this by adding a helper.

As explained by Gary Guo in [1] no #ifdef CONFIG_PREEMPT_RT
is needed here as rust/bindings/lib.rs prefers externed function to
helpers if an externed function exists.
Reported-by: Conor Dooley <conor@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/20240913-shack-estate-b376a65921b1@spud/
Link: https://lore.kernel.org/rust-for-linux/20240915123626.1a170103.gary@garyguo.net/ [1]
Fixes: 6d20d629 ("rust: lock: introduce `Mutex`")
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240916073752.3123484-1-dirk.behme@de.bosch.com
[ Reworded to include the proper example by Dirk. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

We use const helpers in form of

    const size_t RUST_CONST_HELPER_ARCH_SLAB_MINALIGN = ARCH_SLAB_MINALIGN;

to aid generation of constants by bindgen because it is otherwise a
macro definition of an expression and bindgen doesn't expand the
constant. The helpers are then have `RUST_CONST_HELPER` prefix stripped
and exposed to Rust code as if `ARCH_SLAB_MISALIGN` is generated
natively by bindgen.

This works well for most constants, but on RISC-V, `ARCH_SLAB_MINALIGN`
is defined directly as literal constant if `!CONFIG_MMU`, and bindgen
would generate `ARCH_SLAB_MINALIGN` directly, thus conflict with the
one generated through the helper.

To fix this, we simply need to block bindgen from generating directly
without going through helper.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409160804.eSg9zh1e-lkp@intel.com/Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: https://lore.kernel.org/r/20240916003347.1744345-1-gary@garyguo.netSigned-off-by: Miguel Ojeda <ojeda@kernel.org>

The `LockedBy::access` method only requires a shared reference to the
owner, so if we have shared access to the `LockedBy` from several
threads at once, then two threads could call `access` in parallel and
both obtain a shared reference to the inner value. Thus, require that
`T: Sync` when calling the `access` method.

An alternative is to require `T: Sync` in the `impl Sync for LockedBy`.
This patch does not choose that approach as it gives up the ability to
use `LockedBy` with `!Sync` types, which is okay as long as you only use
`access_mut`.

Cc: stable@vger.kernel.org
Fixes: 7b1f55e3 ("rust: sync: introduce `LockedBy`")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240915-locked-by-sync-fix-v2-1-1a8d89710392@google.comSigned-off-by: Miguel Ojeda <ojeda@kernel.org>

Rust modules are intended to be sorted, thus do so.

This makes `rustfmtcheck` to pass again.

Fixes: 57017256 ("Merge tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240926124751.345471-1-ojeda@kernel.orgSigned-off-by: Miguel Ojeda <ojeda@kernel.org>

Pull Rust updates from Miguel Ojeda:
 "Toolchain and infrastructure:

   - Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up
     objtool warnings), teach objtool about 'noreturn' Rust symbols and
     mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we
     should be objtool-warning-free, so enable it to run for all Rust
     object files.

   - KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.

   - Support 'RUSTC_VERSION', including re-config and re-build on
     change.

   - Split helpers file into several files in a folder, to avoid
     conflicts in it. Eventually those files will be moved to the right
     places with the new build system. In addition, remove the need to
     manually export the symbols defined there, reusing existing
     machinery for that.

   - Relax restriction on configurations with Rust + GCC plugins to just
     the RANDSTRUCT plugin.

  'kernel' crate:

   - New 'list' module: doubly-linked linked list for use with reference
     counted values, which is heavily used by the upcoming Rust Binder.

     This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
     unique for the given ID), 'AtomicTracker' (tracks whether a
     'ListArc' exists using an atomic), 'ListLinks' (the prev/next
     pointers for an item in a linked list), 'List' (the linked list
     itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor
     into a 'List' that allows to remove elements), 'ListArcField' (a
     field exclusively owned by a 'ListArc'), as well as support for
     heterogeneous lists.

   - New 'rbtree' module: red-black tree abstractions used by the
     upcoming Rust Binder.

     This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a
     node), 'RBTreeNodeReservation' (a memory reservation for a node),
     'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor'
     (bidirectional cursor that allows to remove elements), as well as
     an entry API similar to the Rust standard library one.

   - 'init' module: add 'write_[pin_]init' methods and the
     'InPlaceWrite' trait. Add the 'assert_pinned!' macro.

   - 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
     introducing an associated type in the trait.

   - 'alloc' module: add 'drop_contents' method to 'BoxExt'.

   - 'types' module: implement the 'ForeignOwnable' trait for
     'Pin<Box<T>>' and improve the trait's documentation. In addition,
     add the 'into_raw' method to the 'ARef' type.

   - 'error' module: in preparation for the upcoming Rust support for
     32-bit architectures, like arm, locally allow Clippy lint for
     those.

  Documentation:

   - https://rust.docs.kernel.org has been announced, so link to it.

   - Enable rustdoc's "jump to definition" feature, making its output a
     bit closer to the experience in a cross-referencer.

   - Debian Testing now also provides recent Rust releases (outside of
     the freeze period), so add it to the list.

  MAINTAINERS:

   - Trevor is joining as reviewer of the "RUST" entry.

  And a few other small bits"

* tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits)
  kasan: rust: Add KASAN smoke test via UAF
  kbuild: rust: Enable KASAN support
  rust: kasan: Rust does not support KHWASAN
  kbuild: rust: Define probing macros for rustc
  kasan: simplify and clarify Makefile
  rust: cfi: add support for CFI_CLANG with Rust
  cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
  rust: support for shadow call stack sanitizer
  docs: rust: include other expressions in conditional compilation section
  kbuild: rust: replace proc macros dependency on `core.o` with the version text
  kbuild: rust: rebuild if the version text changes
  kbuild: rust: re-run Kconfig if the version text changes
  kbuild: rust: add `CONFIG_RUSTC_VERSION`
  rust: avoid `box_uninit_write` feature
  MAINTAINERS: add Trevor Gross as Rust reviewer
  rust: rbtree: add `RBTree::entry`
  rust: rbtree: add cursor
  rust: rbtree: add mutable iterator
  rust: rbtree: add iterator
  rust: rbtree: add red-black tree implementation backed by the C version
  ...

Pull NFS client updates from Anna Schumaker:
 "New Features:
   - Add a 'noalignwrite' mount option for lock-less 'lost writes' prevention
   - Add support for the LOCALIO protocol extention

  Bugfixes:
   - Fix memory leak in error path of nfs4_do_reclaim()
   - Simplify and guarantee lock owner uniqueness
   - Fix -Wformat-truncation warning
   - Fix folio refcounts by using folio_attach_private()
   - Fix failing the mount system call when the server is down
   - Fix detection of "Proxying of Times" server support

  Cleanups:
   - Annotate struct nfs_cache_array with __counted_by()
   - Remove unnecessary NULL checks before kfree()
   - Convert RPC_TASK_* constants to an enum
   - Remove obsolete or misleading comments and declerations"

* tag 'nfs-for-6.12-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (41 commits)
  nfs: Fix `make htmldocs` warnings in the localio documentation
  nfs: add "NFS Client and Server Interlock" section to localio.rst
  nfs: add FAQ section to Documentation/filesystems/nfs/localio.rst
  nfs: add Documentation/filesystems/nfs/localio.rst
  nfs: implement client support for NFS_LOCALIO_PROGRAM
  nfs/localio: use dedicated workqueues for filesystem read and write
  pnfs/flexfiles: enable localio support
  nfs: enable localio for non-pNFS IO
  nfs: add LOCALIO support
  nfs: pass struct nfsd_file to nfs_init_pgio and nfs_init_commit
  nfsd: implement server support for NFS_LOCALIO_PROGRAM
  nfsd: add LOCALIO support
  nfs_common: prepare for the NFS client to use nfsd_file for LOCALIO
  nfs_common: add NFS LOCALIO auxiliary protocol enablement
  SUNRPC: replace program list with program array
  SUNRPC: add svcauth_map_clnt_to_svc_cred_local
  SUNRPC: remove call_allocate() BUG_ONs
  nfsd: add nfsd_serv_try_get and nfsd_serv_put
  nfsd: add nfsd_file_acquire_local()
  nfsd: factor out __fh_verify to allow NULL rqstp to be passed
  ...

Pull fuse updates from Miklos Szeredi:

 - Add support for idmapped fuse mounts (Alexander Mikhalitsyn)

 - Add optimization when checking for writeback (yangyun)

 - Add tracepoints (Josef Bacik)

 - Clean up writeback code (Joanne Koong)

 - Clean up request queuing (me)

 - Misc fixes

* tag 'fuse-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (32 commits)
  fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set
  fuse: clear FR_PENDING if abort is detected when sending request
  fs/fuse: convert to use invalid_mnt_idmap
  fs/mnt_idmapping: introduce an invalid_mnt_idmap
  fs/fuse: introduce and use fuse_simple_idmap_request() helper
  fs/fuse: fix null-ptr-deref when checking SB_I_NOIDMAP flag
  fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN
  virtio_fs: allow idmapped mounts
  fuse: allow idmapped mounts
  fuse: warn if fuse_access is called when idmapped mounts are allowed
  fuse: handle idmappings properly in ->write_iter()
  fuse: support idmapped ->rename op
  fuse: support idmapped ->set_acl
  fuse: drop idmap argument from __fuse_get_acl
  fuse: support idmapped ->setattr op
  fuse: support idmapped ->permission inode op
  fuse: support idmapped getattr inode op
  fuse: support idmap for mkdir/mknod/symlink/create/tmpfile
  fuse: support idmapped FUSE_EXT_GROUPS
  fuse: add an idmap argument to fuse_simple_request
  ...

Pull exfat updates from Namjae Jeon:

 - Clean-up unnecessary codes as ->valid_size is supported

 - buffered-IO fallback is no longer needed when using direct-IO

 - Move ->valid_size extension from mmap to ->page_mkwrite. This
   improves the overhead caused by unnecessary zero-out during mmap.

 - Fix memleaks from exfat_load_bitmap() and exfat_create_upcase_table()

 - Add sops->shutdown and ioctl

 - Add Yuezhang Mo as a reviwer

* tag 'exfat-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  MAINTAINERS: exfat: add myself as reviewer
  exfat: resolve memory leak from exfat_create_upcase_table()
  exfat: move extend valid_size into ->page_mkwrite()
  exfat: fix memory leak in exfat_load_bitmap()
  exfat: Implement sops->shutdown and ioctl
  exfat: do not fallback to buffered write
  exfat: drop ->i_size_ondisk

Pull f2fs updates from Jaegeuk Kim:
 "The main changes include converting major IO paths to use folio, and
  adding various knobs to control GC more flexibly for Zoned devices.

  In addition, there are several patches to address corner cases of
  atomic file operations and better support for file pinning on zoned
  device.

  Enhancement:
   - add knobs to tune foreground/background GCs for Zoned devices
   - convert IO paths to use folio
   - reduce expensive checkpoint trigger frequency
   - allow F2FS_IPU_NOCACHE for pinned file
   - forcibly migrate to secure space for zoned device file pinning
   - get rid of buffer_head use
   - add write priority option based on zone UFS
   - get rid of online repair on corrupted directory

  Bug fixes:
   - fix to don't panic system for no free segment fault injection
   - fix to don't set SB_RDONLY in f2fs_handle_critical_error()
   - avoid unused block when dio write in LFS mode
   - compress: don't redirty sparse cluster during {,de}compress
   - check discard support for conventional zones
   - atomic: prevent atomic file from being dirtied before commit
   - atomic: fix to check atomic_file in f2fs ioctl interfaces
   - atomic: fix to forbid dio in atomic_file
   - atomic: fix to truncate pagecache before on-disk metadata truncation
   - atomic: create COW inode from parent dentry
   - atomic: fix to avoid racing w/ GC
   - atomic: require FMODE_WRITE for atomic write ioctls
   - fix to wait page writeback before setting gcing flag
   - fix to avoid racing in between read and OPU dio write, dio completion
   - fix several potential integer overflows in file offsets and dir_block_index
   - fix to avoid use-after-free in f2fs_stop_gc_thread()

  As usual, there are several code clean-ups and refactorings"

* tag 'f2fs-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (60 commits)
  f2fs: allow F2FS_IPU_NOCACHE for pinned file
  f2fs: forcibly migrate to secure space for zoned device file pinning
  f2fs: remove unused parameters
  f2fs: fix to don't panic system for no free segment fault injection
  f2fs: fix to don't set SB_RDONLY in f2fs_handle_critical_error()
  f2fs: add valid block ratio not to do excessive GC for one time GC
  f2fs: create gc_no_zoned_gc_percent and gc_boost_zoned_gc_percent
  f2fs: do FG_GC when GC boosting is required for zoned devices
  f2fs: increase BG GC migration window granularity when boosted for zoned devices
  f2fs: add reserved_segments sysfs node
  f2fs: introduce migration_window_granularity
  f2fs: make BG GC more aggressive for zoned devices
  f2fs: avoid unused block when dio write in LFS mode
  f2fs: fix to check atomic_file in f2fs ioctl interfaces
  f2fs: get rid of online repaire on corrupted directory
  f2fs: prevent atomic file from being dirtied before commit
  f2fs: get rid of page->index
  f2fs: convert read_node_page() to use folio
  f2fs: convert __write_node_page() to use folio
  f2fs: convert f2fs_write_data_page() to use folio
  ...

Pull bpf 'struct fd' updates from Alexei Starovoitov:
 "This includes struct_fd BPF changes from Al and Andrii"

* tag 'bpf-next-6.12-struct-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
  bpf: convert bpf_token_create() to CLASS(fd, ...)
  security,bpf: constify struct path in bpf_token_create() LSM hook
  bpf: more trivial fdget() conversions
  bpf: trivial conversions for fdget()
  bpf: switch maps to CLASS(fd, ...)
  bpf: factor out fetching bpf_map from FD and adding it to used_maps list
  bpf: switch fdget_raw() uses to CLASS(fd_raw, ...)
  bpf: convert __bpf_prog_get() to CLASS(fd, ...)

Pull Kbuild updates from Masahiro Yamada:

 - Support cross-compiling linux-headers Debian package and kernel-devel
   RPM package

 - Add support for the linux-debug Pacman package

 - Improve module rebuilding speed by factoring out the common code to
   scripts/module-common.c

 - Separate device tree build rules into scripts/Makefile.dtbs

 - Add a new script to generate modules.builtin.ranges, which is useful
   for tracing tools to find symbols in built-in modules

 - Refactor Kconfig and misc tools

 - Update Kbuild and Kconfig documentation

* tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
  kbuild: doc: replace "gcc" in external module description
  kbuild: doc: describe the -C option precisely for external module builds
  kbuild: doc: remove the description about shipped files
  kbuild: doc: drop section numbering, use references in modules.rst
  kbuild: doc: throw out the local table of contents in modules.rst
  kbuild: doc: remove outdated description of the limitation on -I usage
  kbuild: doc: remove description about grepping CONFIG options
  kbuild: doc: update the description about Kbuild/Makefile split
  kbuild: remove unnecessary export of RUST_LIB_SRC
  kbuild: remove append operation on cmd_ld_ko_o
  kconfig: cache expression values
  kconfig: use hash table to reuse expressions
  kconfig: refactor expr_eliminate_dups()
  kconfig: add comments to expression transformations
  kconfig: change some expr_*() functions to bool
  scripts: move hash function from scripts/kconfig/ to scripts/include/
  kallsyms: change overflow variable to bool type
  kallsyms: squash output_address()
  kbuild: add install target for modules.builtin.ranges
  scripts: add verifier script for builtin module range data
  ...

Merge tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux

Pull cpupower updates from Shuah Khan
 "The 'raw_pylibcpupower.i' file was being removed by "make mrproper".

  That was because '*.i', '.s' and '*.o' files are generated during
  kernel compile and removed when the repo is cleaned by mrproper.

  Rename it to use .swg extension instead to avoid the problem.

  A second patch removes references to it from .gitignore"

* tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
  pm: cpupower: Clean up bindings gitignore
  pm: cpupower: rename raw_pylibcpupower.i

Pull i3c updates from Alexandre Belloni:
 "This adds support for the I3C HCI controller of the AMD SoC which as
  expected requires quirks. Also fixes for the other drivers, including
  rate selection fixes for svc.

  Core:
   - allow adjusting first broadcast address speed

  Drivers:
   - cdns: few fixes
   - mipi-i3c-hci: Add AMD SoC I3C controller support and quirks, fix
     get_i3c_mode
   - svc: adjust rates, fix race condition"

* tag 'i3c/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition
  i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition
  i3c: master: svc: adjust SDR according to i3c spec
  i3c: master: svc: use slow speed for first broadcast address
  i3c: master: support to adjust first broadcast address speed
  i3c/master: cmd_v1: Fix the rule for getting i3c mode
  i3c: master: cdns: fix module autoloading
  i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold
  i3c: mipi-i3c-hci: Add a quirk to set timing parameters
  i3c: mipi-i3c-hci: Relocate helper macros to HCI header file
  i3c: mipi-i3c-hci: Add a quirk to set PIO mode
  i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1
  i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List

The TI_K3_M4_REMOTEPROC Kconfig entry selects OMAP2PLUS_MBOX, but that
driver in turn depends on other things, which the k4-m4 driver didn't.

This causes a Kconfig time warning:

  WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
    Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
    Selected by [m]:
    - TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])

because you can't select something that is unavailable.

Make the dependencies for TI_K3_M4_REMOTEPROC match those of the
OMAP2PLUS_MBOX driver that it needs.

Fixes: ebcf9008 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Hari Nagalla <hnagalla@ti.com>
Cc: Andrew Davis <afd@ti.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull input updates from Dmitry Torokhov:

 - support for PixArt PS/2 touchpad

 - updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers

 - support for GPIO-only mode for ADP55888 controller

 - support for touch keys in Zinitix driver

 - support for querying density of Synaptics sensors

 - sysfs interface for Goodex "Berlin" devices to read and write touch
   IC registers

 - more quirks to i8042 to handle various Tuxedo laptops

 - a number of drivers have been converted to using "guard" notation
   when acquiring various locks, as well as using other cleanup
   functions to simplify releasing of resources (with more drivers to
   follow)

 - evdev will limit amount of data that can be written into an evdev
   instance at a given time to 4096 bytes (170 input events) to avoid
   holding evdev->mutex for too long and starving other users

 - Spitz has been converted to use software nodes/properties to describe
   its matrix keypad and GPIO-connected LEDs

 - msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
   removed since noone in mainline have been using them

 - other assorted cleanups and fixes

* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
  ARM: spitz: fix compile error when matrix keypad driver is enabled
  Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
  Input: adp5588-keys - fix check on return code
  Input: Convert comma to semicolon
  Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
  Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
  Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
  Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
  Input: ims-pcu - fix calling interruptible mutex
  Input: zforce_ts - switch to using asynchronous probing
  Input: zforce_ts - remove assert/deassert wrappers
  Input: zforce_ts - do not hardcode interrupt level
  Input: zforce_ts - switch to using devm_regulator_get_enable()
  Input: zforce_ts - stop treating VDD regulator as optional
  Input: zforce_ts - make zforce_idtable constant
  Input: zforce_ts - use dev_err_probe() where appropriate
  Input: zforce_ts - do not ignore errors when acquiring regulator
  Input: zforce_ts - make parsing of contacts less confusing
  Input: zforce_ts - switch to using get_unaligned_le16
  Input: zforce_ts - use guard notation when acquiring mutexes
  ...

Pull hwspinlock update from Bjorn Andersson:
 "This converts the Spreadtrum hardware spinlock DeviceTree binding to
  YAML, to allow validation of related DeviceTree source"

* tag 'hwlock-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  dt-bindings: hwlock: sprd-hwspinlock: convert to YAML

Pull rpmsg updates from Bjorn Andersson:

 - Minor cleanup/refactor to the Qualcomm GLINK code, in order to add
   trace events related to the messages exchange with the remote side,
   useful for debugging a range of interoperability issues

 - Rewrite the nested structs with flexible array members in order to
   avoid the risk of invalid accesses

* tag 'rpmsg-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: glink: Avoid -Wflex-array-member-not-at-end warnings
  rpmsg: glink: Introduce packet tracepoints
  rpmsg: glink: Pass channel to qcom_glink_send_close_ack()
  rpmsg: glink: Tidy up RX advance handling

Pull remoteproc updates from Bjorn Andersson:

 - Add remoteproc support for the Cortex M4F found in AM62x and AM64x of
   the TI K3 family, support for the modem remoteproc in the Qualcomm
   SDX75, and audio, compute and general-purpose DSPs of the Qualcomm
   SA8775P.

 - Add support for blocking and non-blocking mailbox transmissions to
   the i.MX remoteproc driver, and implement poweroff and reboot
   mechanisms using them. Plus a few bug fixes and minor improvements.

 - Cleanups and bug fixes for the TI K3 DSP and R5F drivers

 - Support mapping SRAM regions into the AMD-Xilinx Zynqmp R5 cores

 - Use devres helpers for various allocations in the Ingenic, TI DA8xx,
   TI Keystone, TI K3, ST slim drivers

 - Replace uses of of_{find,get}_property() with of_property_present()
   where possible

* tag 'rproc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
  remoteporc: ingenic: Use devm_platform_ioremap_resource_byname()
  remoteproc: da8xx: Use devm_platform_ioremap_resource_byname()
  remoteproc: st_slim: Use devm_platform_ioremap_resource_byname()
  remoteproc: xlnx: Add sram support
  remoteproc: k3-r5: Fix error handling when power-up failed
  remoteproc: imx_rproc: Add support for poweroff and reboot
  remoteproc: imx_rproc: Allow setting of the mailbox transmit mode
  remoteproc: k3-r5: Delay notification of wakeup event
  remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
  remoteproc: k3: Factor out TI-SCI processor control OF get function
  dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
  remoteproc: k3-dsp: Acquire mailbox handle during probe routine
  remoteproc: k3-r5: Acquire mailbox handle during probe routine
  remoteproc: k3-r5: Use devm_rproc_alloc() helper
  remoteproc: qcom: pas: Add support for SA8775p ADSP, CDSP and GPDSP
  remoteproc: qcom: pas: Add SDX75 remoteproc support
  dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
  remoteproc: keystone: Use devm_rproc_alloc() helper
  remoteproc: keystone: Use devm_kasprintf() to build name string
  dt-bindings: remoteproc: xlnx,zynqmp-r5fss: Add missing "additionalProperties" on child nodes
  ...

Pull VFIO updates from Alex Williamson:
 "Just a few cleanups this cycle:

   - Remove several unused structure and function declarations, and
     unused variables (Dr. David Alan Gilbert, Yue Haibing, Zhang Zekun)

   - Constify unmodified structure in mdev (Hongbo Li)

   - Convert to unsigned type to catch overflow with less fanfare than
     passing a negative value to kcalloc() (Dan Carpenter)"

* tag 'vfio-v6.12-rc1' of https://github.com/awilliam/linux-vfio:
  vfio/pci: clean up a type in vfio_pci_ioctl_pci_hot_reset_groups()
  vfio/mdev: Constify struct kobj_type
  vfio: mdev: Remove unused function declarations
  vfio/fsl-mc: Remove unused variable 'hwirq'
  vfio/pci: Remove unused struct 'vfio_pci_mmap_vma'

Pull dma-mapping fixes from Christoph Hellwig:

 - sort out a few issues with the direct calls to iommu-dma (Christoph
   Hellwig, Leon Romanovsky)

* tag 'dma-mapping-6.12-2024-09-24' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: report unlimited DMA addressing in IOMMU DMA path
  iommu/dma: remove most stubs in iommu-dma.h
  dma-mapping: fix vmap and mmap of noncontiougs allocations

Pull iommufd updates from Jason Gunthorpe:
 "Collection of small cleanup and one fix:

   - Sort headers and struct forward declarations

   - Fix random selftest failures in some cases due to dirty tracking
     tests

   - Have the reserved IOVA regions mechanism work when a HWPT is used
     as a nesting parent. This updates the nesting parent's IOAS with
     the reserved regions of the device and will also install the ITS
     doorbell page on ARM.

   - Add missed validation of parent domain ops against the current
     iommu

   - Fix a syzkaller bug related to integer overflow during ALIGN()

   - Tidy two iommu_domain attach paths"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommu: Set iommu_attach_handle->domain in core
  iommufd: Avoid duplicated __iommu_group_set_core_domain() call
  iommufd: Protect against overflow of ALIGN() during iova allocation
  iommufd: Reorder struct forward declarations
  iommufd: Check the domain owner of the parent before creating a nesting domain
  iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
  iommufd/selftest: Fix buffer read overrrun in the dirty test
  iommufd: Reorder include files

Pull rdma updates from Jason Gunthorpe:
 "Usual collection of small improvements and fixes, nothing especially
  stands out to me here.

  The new multipath PCI feature is a sign of things to come, I think we
  will see more of this in the next 10 years. Broadcom and HNS continue
  to update their drivers for their new HW generations.

  Summary:

   - Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
     hfi, erdma, hns, irdma

   - Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls

   - Multipath PCI for mlx5

   - Variable size work queue, SRQ changes, and relaxed ordering for new
     bnxt HW

   - New ODP fault resolution FW protocol in mlx5

   - New 'rdma monitor' netlink mechanism"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
  RDMA/bnxt_re: Remove the unused variable en_dev
  RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
  RDMA/irdma: fix error message in irdma_modify_qp_roce()
  RDMA/cxgb4: Added NULL check for lookup_atid
  RDMA/hns: Fix ah error counter in sw stat not increasing
  RDMA/bnxt_re: Recover the device when FW error is detected
  RDMA/bnxt_re: Group all operations under add_device and remove_device
  RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
  RDMA/bnxt_re: Change aux driver data to en_info to hold more information
  RDMA/nldev: Expose whether RDMA monitoring is supported
  RDMA/nldev: Add support for RDMA monitoring
  RDMA/mlx5: Use IB set_netdev and get_netdev functions
  RDMA/device: Remove optimization in ib_device_get_netdev()
  RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
  RDMA/mlx5: Obtain upper net device only when needed
  RDMA/mlx5: Check RoCE LAG status before getting netdev
  RDMA/mlx5: Consider the query_vuid cap for data_direct
  net/mlx5: Handle memory scheme ODP capabilities
  RDMA/mlx5: Add implicit MR handling to ODP memory scheme
  RDMA/mlx5: Add handling for memory scheme page fault events
  ...

Merge tag 'sched_ext-for-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext

Pull sched_ext fixes from Tejun Heo:

 - Three build fixes

 - The fix for a stall bug introduced by a recent optimization in sched
   core (SM_IDLE)

 - Addition of /sys/kernel/sched_ext/enable_seq. While not a fix, it is
   a simple addition that distro people want to be able to tell whether
   an SCX scheduler has ever been loaded on the system

* tag 'sched_ext-for-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
  sched_ext: Provide a sysfs enable_seq counter
  sched_ext: Fix build when !CONFIG_STACKTRACE
  sched, sched_ext: Disable SM_IDLE/rq empty path when scx_enabled()
  sched: Put task_group::idle under CONFIG_GROUP_SCHED_WEIGHT
  sched: Add dummy version of sched_group_set_idle()

Pull more io_uring updates from Jens Axboe:
 "Mostly just a set of fixes in here, or little changes that didn't get
  included in the initial pull request. This contains:

   - Move the SQPOLL napi polling outside the submission lock (Olivier)

   - Rename of the "copy buffers" API that got added in the 6.12 merge
     window. There's really no copying going on, it's just referencing
     the buffers. After a bit of consideration, decided that it was
     better to simply rename this to avoid potential confusion (me)

   - Shrink struct io_mapped_ubuf from 48 to 32 bytes, by changing it to
     start + len tracking rather than having start / end in there, and
     by removing the caching of folio_mask when we can just calculate it
     from folio_shift when we need it (me)

   - Fixes for the SQPOLL affinity checking (me, Felix)

   - Fix for how cqring waiting checks for the presence of task_work.
     Just check it directly rather than check for a specific
     notification mechanism (me)

   - Tweak to how request linking is represented in tracing (me)

   - Fix a syzbot report that deliberately sets up a huge list of
     overflow entries, and then hits rcu stalls when flushing this list.
     Just check for the need to preempt, and drop/reacquire locks in the
     loop. There's no state maintained over the loop itself, and each
     entry is yanked from head-of-list (me)"

* tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux:
  io_uring: check if we need to reschedule during overflow flush
  io_uring: improve request linking trace
  io_uring: check for presence of task_work rather than TIF_NOTIFY_SIGNAL
  io_uring/sqpoll: do the napi busy poll outside the submission block
  io_uring: clean up a type in io_uring_register_get_file()
  io_uring/sqpoll: do not put cpumask on stack
  io_uring/sqpoll: retain test for whether the CPU is valid
  io_uring/rsrc: change ubuf->ubuf_end to length tracking
  io_uring/rsrc: get rid of io_mapped_ubuf->folio_mask
  io_uring: rename "copy buffers" to "clone buffers"

Pull sysctl update from Joel Granados:

 - Avoid evaluating non-mount ctl_tables as a sysctl_mount_point by
   removing the unlikely (but possible) chance that the permanently
   empty ctl_table array shares its address with another ctl_table

 - Update Joel Granados' contact info in MAINTAINERS

* tag 'sysctl-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
  MAINTAINERS: update email for Joel Granados
  sysctl: avoid spurious permanent empty tables

Pull RISC-V updates from Palmer Dabbelt:

 - Support using Zkr to seed KASLR

 - Support IPI-triggered CPU backtracing

 - Support for generic CPU vulnerabilities reporting to userspace

 - A few cleanups for missing licenses

 - The size limit on the XIP kernel has been removed

 - Support for tracing userspace stacks

 - Support for the Svvptc extension

 - Various cleanups and fixes throughout the tree

* tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (47 commits)
  crash: Fix riscv64 crash memory reserve dead loop
  perf/riscv-sbi: Add platform specific firmware event handling
  tools: Optimize ring buffer for riscv
  tools: Add riscv barrier implementation
  RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t
  ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
  riscv: Enable bitops instrumentation
  riscv: Omit optimized string routines when using KASAN
  ACPI: RISCV: Make acpi_numa_get_nid() to be static
  riscv: Randomize lower bits of stack address
  selftests: riscv: Allow mmap test to compile on 32-bit
  riscv: Make riscv_isa_vendor_ext_andes array static
  riscv: Use LIST_HEAD() to simplify code
  riscv: defconfig: Disable RZ/Five peripheral support
  RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup
  riscv: avoid Imbalance in RAS
  riscv: cacheinfo: Add back init_cache_level() function
  riscv: Remove unused _TIF_WORK_MASK
  drivers/perf: riscv: Remove redundant macro check
  riscv: define ILLEGAL_POINTER_VALUE for 64bit
  ...

Pull m68knommu fixlet from Greg Ungerer:
 "Only a single change, cleaning up white space in debug message"

* tag 'm68knommu-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: remove trailing space after \n newline

Pull crypto fixes from Herbert Xu:

 - Disable buggy p10 aes-gcm code on powerpc

 - Fix module aliases in paes_s390

 - Fix buffer overread in caam

* tag 'v6.12-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: powerpc/p10-aes-gcm - Disable CRYPTO_AES_GCM_P10
  crypto: s390/paes - Fix module aliases
  crypto: caam - Pad SG length when allocating hash edesc

Pull landlock updates from Mickaël Salaün:
 "We can now scope a Landlock domain thanks to a new "scoped" field that
  can deny interactions with resources outside of this domain.

  The LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET flag denies connections to an
  abstract UNIX socket created outside of the current scoped domain, and
  the LANDLOCK_SCOPE_SIGNAL flag denies sending a signal to processes
  outside of the current scoped domain.

  These restrictions also apply to nested domains according to their
  scope. The related changes will also be useful to support other kind
  of IPC isolations"

* tag 'landlock-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Document LANDLOCK_SCOPE_SIGNAL
  samples/landlock: Add support for signal scoping
  selftests/landlock: Test signal created by out-of-bound message
  selftests/landlock: Test signal scoping for threads
  selftests/landlock: Test signal scoping
  landlock: Add signal scoping
  landlock: Document LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET
  samples/landlock: Add support for abstract UNIX socket scoping
  selftests/landlock: Test inherited restriction of abstract UNIX socket
  selftests/landlock: Test connected and unconnected datagram UNIX socket
  selftests/landlock: Test UNIX sockets with any address formats
  selftests/landlock: Test abstract UNIX socket scoping
  selftests/landlock: Test handling of unknown scope
  landlock: Add abstract UNIX socket scoping

Pull key updates from Jarkko Sakkinen:
 "The bulk of this is OpenSSL 3.0 compatibility fixes for the signing
  and certificates"

* tag 'keys-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  sign-file,extract-cert: use pkcs11 provider for OPENSSL MAJOR >= 3
  sign-file,extract-cert: avoid using deprecated ERR_get_error_line()
  sign-file,extract-cert: move common SSL helper functions to a header
  KEYS: prevent NULL pointer dereference in find_asymmetric_key()
  KEYS: Remove unused declarations

Pull LSM fixes from Paul Moore:

 - Add a missing security_mmap_file() check to the remap_file_pages()
   syscall

 - Properly reference the SELinux and Smack LSM blobs in the
   security_watch_key() LSM hook

 - Fix a random IPE selftest crash caused by a missing list terminator
   in the test

* tag 'lsm-pr-20240923' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  ipe: Add missing terminator to list of unit tests
  selinux,smack: properly reference the LSM blob in security_watch_key()
  mm: call the security_mmap_file() LSM hook in remap_file_pages()

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 92945bd8 ("nfs: add Documentation/filesystems/nfs/localio.rst")
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>

This may be a typo. The comment has said shared locks are
not allowed when this bit is set. If using shared lock, the
wait in `fuse_file_cached_io_open` may be forever.

Fixes: 205c1d80 ("fuse: allow parallel dio writes with FUSE_DIRECT_IO_ALLOW_MMAP")
CC: stable@vger.kernel.org # v6.9
Signed-off-by: yangyun <yangyun50@huawei.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

The (!fiq->connected) check was moved into the queuing method resulting in
the following:

Fixes: 5de8acb4 ("fuse: cleanup request queuing towards virtiofs")
Reported-by: Lai, Yi <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/ZvFEAM6JfrBKsOU0@ly-workstation/Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Pull media updates from Mauro Carvalho Chehab:

 - New CEC driver: Extron DA HD 4K Plus

 - Lots of driver fixes, cleanups and improvements

* tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (179 commits)
  media: atomisp: Use clamp() in ia_css_eed1_8_vmem_encode()
  media: atomisp: Fix eed1_8 code assigning signed values to an unsigned variable
  media: atomisp: set lock before calling vb2_queue_init()
  media: atomisp: Improve binary finding debug logging
  media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]()
  media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2
  media: atomisp: add missing wait_prepare/finish ops
  media: atomisp: Remove unused declaration
  media: atomisp: use clamp() in compute_coring()
  media: atomisp: use clamp() in ia_css_eed1_8_encode()
  media: atomisp: Simplify ia_css_pipe_create_cas_scaler_desc_single_output()
  media: atomisp: Replace rarely used macro from math_support.h
  media: atomisp: Remove duplicated leftover, i.e. sh_css_dvs_info.h
  media: atomisp: bnr: fix trailing statement
  media: atomisp: move trailing */ to separate lines
  media: atomisp: move trailing statement to next line.
  media: atomisp: Fix trailing statement in ia_css_de.host.c
  media: atomisp: Fix spelling mistakes in atomisp.h
  media: atomisp: Fix spelling mistakes in atomisp_platform.h
  media: atomisp: Fix spelling mistake in csi_rx_public.h
  ...

Pull clk updates from Stephen Boyd:
 "The core clk framework is left largely untouched this time around
  except for support for the newly ratified DT property
  'assigned-clock-rates-u64'.

  I'm much more excited about the support for loading DT overlays from
  KUnit tests so that we can test how the clk framework parses DT nodes
  during clk registration. The clk framework has some places that are
  highly DeviceTree dependent so this charts the path to extend the
  KUnit tests to cover even more framework code in the future. I've got
  some more tests on the list that use the DT overlay support, but they
  uncovered issues with clk unregistration that I'm still working on
  fixing.

  Outside the core, the clk driver update pile is dominated by Qualcomm
  and Renesas SoCs, making it fairly usual. Looking closer, there are
  fixes for things all over the place, like adding missing clk
  frequencies or moving defines for the number of clks out of DT binding
  headers into the drivers. There are even conversions of DT bindings to
  YAML and migration away from strings to describe clk topology. Overall
  it doesn't look unusual so I expect the new drivers to be where we'll
  have fixes in the coming weeks.

  Core:
   - KUnit tests for clk registration and fixed rate basic clk type
   - A couple more devm helpers, one consumer and one provider
   - Support for assigned-clock-rates-u64

  New Drivers:
   - Camera, display and GPU clocks on Qualcomm SM4450
   - Camera clocks on Qualcomm SM8150
   - Rockchip rk3576 clks
   - Microchip SAM9X7 clks
   - Renesas RZ/V2H(P) (R9A09G057) clks

  Updates:
   - Mark a bunch of struct freq_tbl const to reduce .data usage
   - Add Qualcomm MSM8226 A7PLL and Regera PLL support
   - Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
     Trion, as they do differ
   - A number of fixes to the Qualcomm SM8550 display clock driver
   - Fold Qualcomm SM8650 display clock driver into SM8550 one
   - Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
   - Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
   - Fix sdcc clk frequency tables on Qualcomm SC8180X
   - Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
   - Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
     them turning off during suspend
   - Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
     GDSCs
   - Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
   - Some fixes for Rockchip rk3228 and rk3588
   - Exynos850: Add clock for Thermal Management Unit
   - Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
     and add clocks for USB block in the FSYS clock controller
   - ExynosAutov9: Add DPUM clock controller
   - ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
     (and a bit more complete bindings)
   - Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
     clocks on i.MX8Q as parents in ACM provider
   - Add i.MX95 NETCMIX support to the block control provider
   - Fix parents for ENETx_REF_SEL clocks on i.MX6UL
   - Add USB clocks, resets and power domains on Renesas RZ/G3S
   - Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
     Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
     Renesas RZ/V2H
   - Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
   - Add LCD controller clocks and resets on Renesas RZ/G2UL
   - Add DMA clocks and resets on Renesas RZ/G3S
   - Add fractional multiplication PLL support on Renesas R-Car Gen4
   - Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
   - Support for the Microchip SAM9X7 SoC as follows:
   - Updates for the Microchip PLL drivers
   - DT binding documentation updates (for the new clock driver and for
     the slow clock controller that SAM9X7 is using)
   - A fix for the Microchip SAMA7G5 clock driver to avoid allocating
     more memory than necessary
   - Constify some Amlogic structs
   - Add SM1 eARC clocks for Amlogic
   - Introduce a symbol namespace for Amlogic clock specific symbols
   - Add reset controller support to audiomix block control on i.MX
   - Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
     lcdif_pixel_src clock
   - Fix parent clocks for earc_phy and audpll on i.MX8MP
   - Fix default parents for enet[12]_ref_sel on i.MX6UL
   - Add ops in composite 8M and 93 that allow no-op on disable
   - Add check for PCC present bit on composite 7ULP register
   - Fix fractional part for fracn-gppll on prepare in i.MX
   - Fix clock tree update for TF-A managed clocks on i.MX8M
   - Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
   - Add the SAI7 IPG clock for i.MX8MN
   - Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
   - Add LVDS bypass clocks on i.MX8QXP
   - Add muxes for MIPI and PHY ref clocks on i.MX
   - Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
   - Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
   - Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
   - Add some module descriptions to the i.MX generic and the i.MXRT1050
     driver
   - Fix return value for bypass for composite i.MX7ULP
   - Move Mediatek clk bindings to clock/
   - Convert some more clk bindings to dt schema"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
  clk: Switch back to struct platform_driver::remove()
  dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
  clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
  clk: provide devm_clk_get_optional_enabled_with_rate()
  clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
  clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
  clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
  clk: renesas: rzv2h: Add support for dynamic switching divider clocks
  clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
  clk: rockchip: fix error for unknown clocks
  clk: rockchip: rk3588: drop unused code
  clk: rockchip: Add clock controller for the RK3576
  clk: rockchip: Add new pll type pll_rk3588_ddr
  dt-bindings: clock, reset: Add support for rk3576
  dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
  clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
  clk: imx95: enable the clock of NETCMIX block control
  dt-bindings: clock: add RMII clock selection
  dt-bindings: clock: add i.MX95 NETCMIX block control
  clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
  ...