- 08 Jul, 2024 2 commits
-
-
Tim Huang authored
Certain call paths still load the SMU firmware for APUs, which needs to be skipped. Signed-off-by:
Tim Huang <Tim.Huang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
YiPeng Chai authored
Sysfs node disable query error count during gpu reset. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
Stanley.Yang <Stanley.Yang@amd.com> Signed-off-by:
-
- 05 Jul, 2024 10 commits
-
-
https://gitlab.freedesktop.org/drm/msmDaniel Vetter authored
Updates for v6.11 Core: - SM7150 support DPU: - SM7150 support - Fix DSC support for DSI panels in video mode - Fixed TE vsync source support for DSI command-mode panels - Fix for devices without UBWC in the display controller (ie. QCM2290) DSI: - Remove unused register-writing wrappers - Fix DSC support for panels in video mode - Add support for parsing TE vsync source - Add support for MSM8937 (28nm DSI PHY) MDP5: - Add support for MSM8937 - Fix configuration for MSM8953 GPU: - Split giant device table into per-gen "hw catalog" similar to what is done on the display side of the driver - Fix a702 UBWC mode - Fix unused variably warnings - GPU memory traces - Add param for userspace to know if raytracing is supported - Memory barrier cleanup and GBIF unhalt fix - X185 support (aka gpu in X1 laptop chips) - a505 support - fixes Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvZQpYEHpSCgXGJ2kaHJDK6QFAFfTsfiWm4b2zZOnjXGw@mail.gmail.com
-
Daniel Vetter authored
Merge tag 'drm-misc-next-2024-07-04' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for $kernel-version: UAPI Changes: Cross-subsystem Changes: Core Changes: - dp/mst: Fix daisy-chaining at resume - dsc: Add helper to dump the DSC configuration - tests: Add tests for the new monochrome TV mode variant Driver Changes: - ast: Refactor the mode setting code - panfrost: Fix devfreq job reporting - stm: Add LDVS support, DSI PHY updates - panels: - New panel: AUO G104STN01, K&d kd101ne3-40ti, Signed-off-by:
-
Daniel Vetter authored
Merge tag 'drm-intel-gt-next-2024-07-04' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next Driver Changes: Fixes/improvements/new stuff: - Downgrade stolen lmem setup warning [gem] (Jonathan Cavitt) - Evaluate GuC priority within locks [gt/uc] (Andi Shyti) - Fix potential UAF by revoke of fence registers [gt] (Janusz Krzysztofik) - Return NULL instead of '0' [gem] (Andi Shyti) - Use the correct format specifier for resource_size_t [gem] (Andi Shyti) - Suppress oom warning in favour of ENOMEM to userspace [gem] (Nirmoy Das) Miscellaneous: - Evaluate forcewake usage within locks [gt] (Andi Shyti) - Fix typo in comment [gt/uc] (Andi Shyti) Signed-off-by:
-
Daniel Vetter authored
Merge tag 'amd-drm-next-6.11-2024-07-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.11-2024-07-03: amdgpu: - Use vmalloc for dc_state - Replay fixes - Freesync fixes - DCN 4.0.1 fixes - DML fixes - DCC updates - Misc code cleanups and bug fixes - 8K display fixes - DCN 3.5 fixes - Restructure DIO code - DML1 fixes - DML2 fixes - GFX11 fix - GFX12 updates - GFX12 modifiers fixes - RAS fixes - IP dump fixes - Add some updated IP version checks _ Silence UBSAN warning radeon: - GPUVM fix Signed-off-by:
-
Daniel Vetter authored
Merge tag 'amd-drm-next-6.11-2024-06-28' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.11-2024-06-28: amdgpu: - JPEG 5.x fixes - More FW loading cleanups - Misc code cleanups - GC 12.x fixes - ASPM fix - DCN 4.0.1 updates - SR-IOV fixes - HDCP fix - USB4 fixes - Silence UBSAN warnings - MES submission fixes - Update documentation for new products - DCC updates - Initial ISP 4.x plumbing - RAS fixes - Misc small fixes amdkfd: - Fix missing unlock in error path for adding queues Signed-off-by:
-
Daniel Vetter authored
Merge tag 'mediatek-drm-next-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 6.11 1. Convert to platform remove callback returning void 2. Drop chain_mode_fixup call in mode_valid() 3. Fixes the errors of MediaTek display driver found by IGT. 4. Add display support for the MT8365-EVK board 5. Fix bit depth overwritten for mtk_ovl_set bit_depth() 6. Remove less-than-zero comparison of an unsigned value 7. Call drm_atomic_helper_shutdown() at shutdown time 8. Log errors in probe with dev_err_probe() 9. Fix possible_crtcs calculation 10. Fix spurious kfree() Signed-off-by:
-
https://git.pengutronix.de/git/lst/linuxDaniel Vetter authored
- fix i.MX8MP NPU clock gating - workaround FE register cdc issues on some cores - fix DMA sync handling for cached buffers - fix job timeout handling - keep TS enabled on MMUv2 cores for improved performance Signed-off-by:
-
Daniel Vetter authored
Merge tag 'exynos-drm-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Some cleanups to Exynos Virtual Display driver - Use drm_edid_duplicate() instead of kmemdup(). - Replace existing EDID handling with struct drm_edid functions for improved management. - Keep an allocated raw_edid or NULL and handle fake_edid_info in get_modes(). Signed-off-by:
-
Daniel Vetter authored
The exynos-next pull is based on a newer -rc than drm-next. hence backmerge first to make sure the unrelated conflicts we accumulated don't end up randomly in the exynos merge pull, but are separated out. Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma code, and cherry-pick conflict in xe. Signed-off-by: -
https://gitlab.freedesktop.org/drm/xe/kernelDaniel Vetter authored
Driver Changes: - Fix in migration code (Auld) - Simplification in HWMon related code (Karthik) - Fix in forcewake logic (Nirmoy) - Fix engine utilization information (umesh) - Clean up on MOCS related code (Roper) - Fix on multicast register (Roper) - Fix TLB invalidation timeout (Nirmoy) - More SRIOV preparation (Michal) - Fix out-of-bounds array access (Lucas) - Fixes around some mutex utilization (Ashutosh, Vinay) - Expand LNL workaround to BMG (Vinay) Signed-off-by:
-
- 04 Jul, 2024 1 commit
-
-
Steven Price authored
If a queue is already assigned to the hardware, then a newly submitted job can start straight away without waiting for the tick. However in this case the devfreq infrastructure isn't notified that the GPU is busy. By the time the tick happens the job might well have finished and no time will be accounted for the GPU being busy. Fix this by recording the GPU as busy directly in queue_run_job() in the case where there is a CSG assigned and therefore we just ring the doorbell. Fixes: de854881 ("drm/panthor: Add the scheduler logical block") Signed-off-by:
Steven Price <steven.price@arm.com> Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240703155646.80928-1-steven.price@arm.com
-
- 03 Jul, 2024 20 commits
-
-
Thomas Zimmermann authored
Register constants are upper case. Fix MGAREG_Status accordingly. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191205160142.3588-3-tzimmermann@suse.de
-
Imre Deak authored
Add a helper to dump the Display Stream Compression configuration, taken into use in the i915 driver by a later patch. v2: - Rebase on the s/DRM_X16/FXP_Q4 change. - s/DSC configration/DSC configuration in the function documentation. Acked-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240628164451.1177612-3-imre.deak@intel.com
-
Imre Deak authored
Add helpers to convert between q4 fixed point and integer/fraction values. Also add the format/argument macros required to printk q4 fixed point variables. The q4 notation is based on the short variant described by https://en.wikipedia.org/wiki/Q_(number_format) where only the number of fraction bits in the fixed point value are defined, while the full size is deducted from the container type, that is the size of int for these helpers. Using the fxp_ prefix, which makes moving these helpers outside of drm to a more generic place easier, if they prove to be useful. These are needed by later patches dumping the Display Stream Compression configuration in DRM core and in the i915 driver to replace the corresponding bpp_x16 helpers defined locally in the driver. v2: Use the more generic/descriptive fxp_q4 prefix instead of drm_x16. (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Acked-by:
-
Wayne Lin authored
[Why] During resume, observe that we receive CSN event before we start topology probing. Handling CSN at this moment based on uncertain topology is unnecessary. [How] Add checking condition in drm_dp_mst_handle_up_req() to skip handling CSN if the topology is yet to be probed. Cc: Lyude Paul <lyude@redhat.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by:
Wayne Lin <Wayne.Lin@amd.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Wayne Lin authored
[Why] After supend/resume, with topology unchanged, observe that link_address_sent of all mstb are marked as false even the topology probing is done without any error. It is caused by wrongly also include "ret == 0" case as a probing failure case. [How] Remove inappropriate checking conditions. Cc: Lyude Paul <lyude@redhat.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Fixes: 37dfdc55 ("drm/dp_mst: Cleanup drm_dp_send_link_address() a bit") Signed-off-by:
-
Dragan Simic authored
Panfrost DRM driver uses devfreq to perform DVFS, while using simple_ondemand devfreq governor by default. This causes driver initialization to fail on boot when simple_ondemand governor isn't built into the kernel statically, as a result of the missing module dependency and, consequently, the required governor module not being included in the initial ramdisk. Thus, let's mark simple_ondemand governor as a softdep for Panfrost, to have its kernel module included in the initial ramdisk. This is a rather longstanding issue that has forced distributions to build devfreq governors statically into their kernels, [1][2] or has forced users to introduce some unnecessary workarounds. [3] For future reference, not having support for the simple_ondemand governor in the initial ramdisk produces errors in the kernel log similar to these below, which were taken from a Pine64 RockPro64: panfrost ff9a0000.gpu: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't initialize GPU devfreq panfrost ff9a0000.gpu: Fatal error during GPU init panfrost: probe of ff9a0000.gpu failed with error -22 Having simple_ondemand marked as a softdep for Panfrost may not resolve this issue for all Linux distributions. In particular, it will remain unresolved for the distributions whose utilities for the initial ramdisk generation do not handle the available softdep information [4] properly yet. However, some Linux distributions already handle softdeps properly while generating their initial ramdisks, [5] and this is a prerequisite step in the right direction for the distributions that don't handle them properly yet. [1] https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/linux61/config?ref_type=heads#L8180 [2] https://salsa.debian.org/kernel-team/linux/-/merge_requests/1066 [3] https://forum.pine64.org/showthread.php?tid=15458 [4] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git/commit/?id=49d8e0b59052999de577ab732b719cfbeb89504d [5] https://github.com/archlinux/mkinitcpio/commit/97ac4d37aae084a050be512f6d8f4489054668ad Cc: Diederik de Haas <didi.debian@cknow.org> Cc: Furkan Kardame <f.kardame@manjaro.org> Cc: stable@vger.kernel.org Fixes: f3ba9122 ("drm/panfrost: Add initial panfrost driver") Signed-off-by:
Dragan Simic <dsimic@manjaro.org> Reviewed-by:
-
Danila Tikhonov authored
Add the DSI host found on SM7150. Signed-off-by:
Danila Tikhonov <danila@jiaxyga.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/601231/Signed-off-by:
Rob Clark <robdclark@chromium.org>
-
Thorsten Blum authored
The if condition !A || A && B can be simplified to !A || B. Fixes the following Coccinelle/coccicheck warning reported by excluded_middle.cocci: WARNING !A || A && B is equivalent to !A || B Compile-tested only. Acked-by:
Thorsten Blum <thorsten.blum@toblux.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
-
Thomas Zimmermann authored
Ast has no special requirements for runtime power management. So replace drm_atomic_helper_commit_tail_rpm() with the regular helper drm_atomic_helper_commit_tail(). Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
The function ast_crtc_dpms() is left over from when the ast driver did not implement atomic modesetting. But DPMS is not supported by atomic modesetting and the helper is only called to enable or disable the CRTC sync pulses. Inline the function into its callers. To disable the CRTC, ast sets (AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF) in VGACRB6. Replace the constants with the correct register constants for VGACRB6. Signed-off-by:
-
Thomas Zimmermann authored
The SCREEN_DISABLE bit controls scanout from display memory. The bit affects all planes, so set it only in the CRTC's atomic enable and disable functions. A number of bugs affect this fix. First of all, ast_set_std_regs() tries to set VGASR1 except for the SD bit. But the read bitmask is invert, so it preserves anything except the SD bit. Fix this by re-inverting the read mask. The second issue is that primary-plane and CRTC helpers modify the SD bit. The bit controls scanout for all planes, primary and HW cursor, so set it only in the CRTC code. Further add a constant to represent the SD bit in VGASR1. Keep the plane's atomic_disable around to make the DRM framework happy. v2: - fix typos in commit message Signed-off-by:
-
Thomas Zimmermann authored
The DPMS code, called from the CRTC's atomic_enable, rewrites the gamma LUT. This is already done by the CRTC's atomic_flush. Remove the duplication. v2: - fix a typo in commit message Signed-off-by:
-
Thomas Zimmermann authored
Several color registers are programmed in the DPMS code of the CRTC's atomic_enable helper and the primary plane's atomic_update. It requires the color format and the display mode. Both code paths handle different cases: the DPMS's code will not be executed if the color format changes without a full mode switch. The plane's code only runs if the color format changes, but ignores display-mode changes. The color format is a property of the primary plane, so consolidate all color-format code in the plane's atomic_update. Remove it from the DPMS helper. v2: - clarify commit message (Jocelyn) Signed-off-by:
-
Thomas Zimmermann authored
Do all mode setting in ast_crtc_helper_mode_set_nofb(), which always runs after disabling the CRTC and before programming the planes. Removes implicit synchronization between the CRTC's atomic disable, enable and the vertical retrace. Display-mode updates require HW cursors to be disabled. The HW cursor only picks up changes at vertical retrace periods. So the CRTC's atomic_disable helper waited for the retrace to delay any following mode-setting operations, which then happened in atomic_enable. See [1] for a description of the problem. With the CRTC helper callback mode_set_nofb, we can now synchronize and reprogram in the same place. As it always runs before the plane update, the plane code can be reordered with the CRTC's later atomic_enable et al. Signed-off-by:
-
Thomas Zimmermann authored
The CRTC's atomic_flush function contains code to program the display mode to the AST DP chip. Move the code to the encoder's atomic_mode_set callback. The DRM atomic-modesetting code invoke this callback as part of the atomic commit. v2: - fix typos in commit message Signed-off-by:
-
Thomas Zimmermann authored
The CRTC helpers contain code to enable and disable DisplayPort connectors. Implement this functionality in the respective connector's atomic_enable/atomic_disable callbacks. DRM's atomic-modesetting helpers will call the functions as part of the atomic commit. Signed-off-by:
-
Jani Nikula authored
Prefer the struct drm_edid based functions for storing the EDID and updating the connector. It would be better if the vidi connection ioctl passed in the EDID size separately instead of relying on the extension count specified in the EDID, but that's what we have to rely on. Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Jani Nikula authored
Avoid assigning fake_edid_info to ctx->raw_edid. Always keep ctx->raw_edid either an allocated pointer or NULL. Defer fake_edid_info handling to .get_modes(). This should be functionally equivalent but slightly easier to follow. Signed-off-by:
-
Jani Nikula authored
Don't open code drm_edid_duplicate(). While at it, drop the error message on allocation failure. Signed-off-by:
-
Inki Dae authored
Merge tag 'exynos-drm-fixes-for-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next Regression fix - Fix an regression issue by adding 640x480 fallback mode for Exynos HDMI driver. Bug fix - Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function. Code cleanup - Remove redundant driver owner initialization since platform_driver_register() sets it automatically.
-
- 02 Jul, 2024 7 commits
-
-
Alex Deucher authored
This is a variable sized array. Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/110420.htmlTested-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Sunil Khatri authored
During ip dump in gfx11 the index variable is reused but is not reinitialized to 0 and this causes the index calculation to be wrong and access out of bound access. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Sunil Khatri <sunil.khatri@amd.com> Signed-off-by:
-
Tim Huang authored
This patch is to add firmware for PSP 14.0.4. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
-
Tim Huang authored
Set the default reset method to mode2 for SMU 14.0.4. Signed-off-by:
-
Tim Huang authored
This patch is to add SMU 14.0.4 support Signed-off-by:
-
Tim Huang authored
This patch is to add SMU 14.0.4 support. Signed-off-by:
Li Ma <li.ma@amd.com> Signed-off-by:
-
Li Ma authored
Replace IP VERSION with smu->is_apu in if condition. And the dpmtable of smu v14.0.4 is same as smu v14.0.0. Signed-off-by:
-
