- 27 Jun, 2022 7 commits
-
-
Umesh Nerlige Ramappa authored
For execlists backend, current implementation of Wa_22011802037 is to stop the CS before doing a reset of the engine. This WA was further extended to wait for any pending MI FORCE WAKEUPs before issuing a reset. Add the extended steps in the execlist path of reset. In addition, extend the WA to gen11. v2: (Tvrtko) - Clarify comments, commit message, fix typos - Use IS_GRAPHICS_VER for gen 11/12 checks v3: (Daneile) - Drop changes to intel_ring_submission since WA does not apply to it - Log an error if MSG IDLE is not defined for an engine Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Fixes: f6aa0d71 ("drm/i915: Add Wa_22011802037 force cs halt") Acked-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220621192105.2100585-1-umesh.nerlige.ramappa@intel.com
-
Alan Previn authored
Using two different types of workoads, it was observed that guc_update_engine_gt_clks was being called too frequently and/or causing a CPU-to-lmem bandwidth hit over PCIE. Details on the workloads and numbers are in the notes below. Background: At the moment, guc_update_engine_gt_clks can be invoked via one of 3 ways. #1 and #2 are infrequent under normal operating conditions: 1.When a predefined "ping_delay" timer expires so that GuC- busyness can sample the GTPM clock counter to ensure it doesn't miss a wrap-around of the 32-bits of the HW counter. (The ping_delay is calculated based on 1/8th the time taken for the counter go from 0x0 to 0xffffffff based on the GT frequency. This comes to about once every 28 seconds at a GT frequency of 19.2Mhz). 2.In preparation for a gt reset. 3.In response to __gt_park events (as the gt power management puts the gt into a lower power state when there is no work being done). Root-cause: For both the workloads described farther below, it was observed that when user space calls IOCTLs that unparks the gt momentarily and repeats such calls many times in quick succession, it triggers calling guc_update_engine_gt_clks as many times. However, the primary purpose of guc_update_engine_gt_clks is to ensure we don't miss the wraparound while the counter is ticking. Thus, the solution is to ensure we skip that check if gt_park is calling this function earlier than necessary. Solution: Snapshot jiffies when we do actually update the busyness stats. Then get the new jiffies every time intel_guc_busyness_park is called and bail if we are being called too soon. Use half of the ping_delay as a safe threshold. NOTE1: Workload1: IGTs' gem_create was modified to create a file handle, allocate memory with sizes that range from a min of 4K to the max supported (in power of two step-sizes). Its maps, modifies and reads back the memory. Allocations and modification is repeated until total memory allocation reaches the max. Then the file handle is closed. With this workload, guc_update_engine_gt_clks was called over 188 thousand times in the span of 15 seconds while this test ran three times. With this patch, the number of calls reduced to 14. NOTE2: Workload2: 30 transcode sessions are created in quick succession. While these sessions are created, pcm-iio tool was used to measure I/O read operation bandwidth consumption sampled at 100 milisecond intervals over the course of 20 seconds. The total bandwidth consumed over 20 seconds without this patch was measured at average at 311KBps per sample. With this patch, the number went down to about 175Kbps which is about a 43% savings. Signed-off-by:Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by:
-
Niranjana Vishwanathapura authored
This reverts commit 1e98d8c5. The problem with this patch is that it makes i915_request to hold a reference to intel_context, which in turn holds a reference on the VM. This strong back referencing can lead to reference loops which leads to resource leak. An example is the upcoming VM_BIND work which requires VM to hold a reference to some shared VM specific BO. But this BO's dma-resv fences holds reference to the i915_request thus leading to reference loop. v2: Do not use reserved requests for virtual engines Signed-off-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Suggested-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
-
Niranjana Vishwanathapura authored
In i915_fence_get_driver_name(), user may not hold a reference to rq->engine. Hence do not access it. Instead, store required device private pointer in 'rq->i915' and use it. Signed-off-by:
-
Matt Roper authored
We've been introducing new registers with a mix of "XEHP_" (architecture) and "XEHPSDV_" (platform) prefixes. For consistency, let's settle on "XEHP_" as the preferred form. XEHPSDV_RP_STATE_CAP stays with its current name since that's truly a platform-specific register and not something that applies to the Xe_HP architecture as a whole. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Caz Yokoyama <caz@caztech.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220624210328.308630-2-matthew.d.roper@intel.com
-
Matt Roper authored
XEHPSDV_FLAT_CCS_BASE_ADDR, GEN8_L3_LRA_1_GPGPU, and MMCD_MISC_CTRL were duplicated between i915_reg.h and intel_gt_regs.h. These are all GT registers, so we should drop the copy from i915_reg.h. XEHPSDV_TILE0_ADDR_RANGE was defined in i915_reg.h, but really belongs in intel_gt_regs.h. Move it. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220624210328.308630-1-matthew.d.roper@intel.com
-
Matthew Auld authored
For imported dma-buf objects we leave the object as cache_coherent = 0 across all platforms, which is reasonable given that have no clue what the memory underneath is, and its not like the driver can ever manually clflush the pages anyway (like with i915_gem_clflush_object) for such objects. However on discrete we choose to treat cache_dirty = true as a programmer error, leading to a warning. The simplest fix looks to be to just change the ordering in cpu_write_needs_clflush to prevent ever setting cache_dirty for dma-buf objects on discrete. Fixes: d028a769 ("drm/i915/dmabuf: Fix prime_mmap to work when using LMEM") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5266Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220622155919.355081-1-matthew.auld@intel.com
-
- 23 Jun, 2022 1 commit
-
-
Akeem G Abodunrin authored
With GuC submission, it takes a little bit longer switching contexts among all available engines simultaneously, when running live_parallel_switch subtest. Increase the timeout. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5885Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by:
-
- 22 Jun, 2022 7 commits
-
-
Lucas De Marchi authored
Re-do what was attempted in commit 7a5c9223 ("drm/i915/gt: Split intel-gtt functions by arch"). The goal of that commit was to split the handlers for older hardware that depend on intel-gtt.ko so i915 can be built for non-x86 archs, after some more patches. Other archs do not need intel-gtt.ko. Main issue with the previous approach: it moved all the hooks, including the gen8, which is used by all platforms gen8 and newer. Re-do the split moving only the handlers for gen < 6, which are the only ones calling out to the separate module. While at it do some minor cleanups: - Rename the prefix s/gen5_/gmch_/ to be more accurate what platforms are covered by intel_ggtt_gmch.c - Remove dead code for gen12 out of needs_idle_maps() - Remove TODO comment leftover - Re-order if/else ladder in ggtt_probe_hw() to keep newest platforms first v2: Add minor cleanups (Matt Roper) Signed-off-by:
-
Lucas De Marchi authored
Exporting the symbols like intel_gtt_* creates some confusion inside i915 that has symbols named similarly. In an attempt to isolate platforms needing intel-gtt.ko, commit 7a5c9223 ("drm/i915/gt: Split intel-gtt functions by arch") moved way too much inside gt/intel_gt_gmch.c, even the functions that don't callout to this module. Rename the symbols to make the separation clear. Signed-off-by:
-
Juha-Pekka Heikkila authored
Add fallback smem allocation for dpt if stolen memory allocation failed. Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by:
-
CQ Tang authored
In the future display might try call this with a normal smem object, which doesn't require PIN_MAPPABLE underneath in order to CPU map the pages (unlike stolen). Extend i915_vma_pin_iomap() to directly use i915_gem_object_pin_map() for such cases. This change was suggested by Chris P Wilson, that we pin the smem with i915_gem_object_pin_map_unlocked(). v2 (jheikkil): Change i915_gem_object_pin_map_unlocked to i915_gem_object_pin_map Signed-off-by:CQ Tang <cq.tang@intel.com> Signed-off-by:
-
Juha-Pekka Heikkila authored
Don't leak lmem mapping in vma_evict, move __i915_vma_iounmap outside i915_vma_is_map_and_fenceable. Signed-off-by:
-
katrinzhou authored
Add missing else in set_proto_ctx_param() to fix coverity issue. Addresses-Coverity: ("Unused value") Fixes: d4433c76 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)") Suggested-by:katrinzhou <katrinzhou@tencent.com> [tursulin: fixup alignment] Signed-off-by:
-
pengfuyuan authored
Fix spelling typo in comment. Reported-by:
k2ci <kernel-bot@kylinos.cn> Signed-off-by:
pengfuyuan <pengfuyuan@kylinos.cn> Signed-off-by:
-
- 21 Jun, 2022 1 commit
-
-
Vinay Belgaumkar authored
We have seen multiple RC6 issues where it is useful to know which global forcewake bits are set. Add this to the 'drpc' debugfs output. v2: Review comments (Ashutosh) Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by:
-
- 20 Jun, 2022 1 commit
-
-
Thomas Hellström authored
When DMAR / VT-d is enabled, the display engine uses overfetching, presumably to deal with the increased latency. To avoid display engine errors and DMAR faults, as a workaround the GGTT is populated with scatch PTEs when VT-d is enabled. However starting with gen10, Write-combined writing of scratch PTES is no longer possible and as a result, populating the full GGTT with scratch PTEs like on resume becomes very slow as uncached access is needed. Therefore, on integrated GPUs utilize the fact that the PTEs are stored in stolen memory which retain content across S3 suspend. Don't clear the PTEs on suspend and resume. This improves on resume time with around 100 ms. While 100+ms might appear like a short time it's 10% to 20% of total resume time and important in some applications. One notable exception is Intel Rapid Start Technology which may cause stolen memory to be lost across what the OS percieves as S3 suspend. If IRST is enabled or if we can't detect whether IRST is enabled, retain the old workaround, clearing and re-instating PTEs. As an additional measure, if we detect that the last ggtt pte was lost during suspend, print a warning and re-populate the GGTT ptes On discrete GPUs, the display engine scans out from LMEM which isn't subject to DMAR, and presumably the workaround is therefore not needed, but that needs to be verified and disabling the workaround for dGPU, if possible, will be deferred to a follow-up patch. v2: - Rely on retained ptes to also speed up suspend and resume re-binding. - Re-build GGTT ptes if Intel rst is enabled. v3: - Re-build GGTT ptes also if we can't detect whether Intel rst is enabled, and if the guard page PTE and end of GGTT was lost. v4: - Fix some kerneldoc issues (Matthew Auld), rebase. Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
- 17 Jun, 2022 4 commits
-
-
Matt Roper authored
Let's replace the assortment of intel_gt_* and intel_uncore_* functions that operate on MCR registers with a cleaner set of interfaces: * intel_gt_mcr_read -- unicast read from specific instance * intel_gt_mcr_read_any[_fw] -- unicast read from any non-terminated instance * intel_gt_mcr_unicast_write -- unicast write to specific instance * intel_gt_mcr_multicast_write[_fw] -- multicast write to all instances We'll also replace the historic "slice" and "subslice" terminology with "group" and "instance" to match the documentation for more recent platforms; these days MCR steering applies to more types of replication than just slice/subslice. v2: - Reference the new kerneldoc from i915.rst. (Jani) - Tweak the wording of the documentation for a couple functions to clarify the difference between "_fw" and non-"_fw" forms. v3: - s/read/write/ to fix copy-paste mistake in a couple comments. (Harish) Signed-off-by:Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
Harish Chegondi <harish.chegondi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220615001019.1821989-3-matthew.d.roper@intel.com
-
Matt Roper authored
Handling of multicast/replicated registers is spread across intel_gt.c and intel_uncore.c today. As multicast handling and the related steering logic gets more complicated with the addition of new platforms and new rules it makes sense to centralize it all in one place. For now the existing functions have been moved to the new .c/.h as-is. Function renames and updates to operate in a more consistent manner will be done in subsequent patches. Signed-off-by:
-
Tvrtko Ursulin authored
Stop displaying engine classes with no engines - it is not a huge problem if they are shown, since the values will correctly be all zeroes, but it does count as misleading. Signed-off-by:
-
Tvrtko Ursulin authored
We have long standing customer complaints that pressing Ctrl-C (or to the effect of) causes engine resets with otherwise well behaving programs. Not only is logging engine resets during normal operation not desirable since it creates support incidents, but more fundamentally we should avoid going the engine reset path when we can since any engine reset introduces a chance of harming an innocent context. Reason for this undesirable behaviour is that the driver currently does not distinguish between banned contexts and non-persistent contexts which have been closed. To fix this we add the distinction between the two reasons for revoking contexts, which then allows the strict timeout only be applied to banned, while innocent contexts (well behaving) can preempt cleanly and exit without triggering the engine reset path. Note that the added context exiting category applies both to closed non- persistent context, and any exiting context when hangcheck has been disabled by the user. At the same time we rename the backend operation from 'ban' to 'revoke' which more accurately describes the actual semantics. (There is no ban at the backend level since banning is a concept driven by the scheduling frontend. Backends are simply able to revoke a running context so that is the more appropriate name chosen.) Signed-off-by:
Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220527072452.2225610-1-tvrtko.ursulin@linux.intel.com
-
- 15 Jun, 2022 1 commit
-
-
Matt Roper authored
As with past platforms, the bspec's performance tuning guide provides recommended MMIO settings. Although not technically "workarounds" we apply these through the workaround framework to ensure that they're re-applied at the proper times (e.g., on engine resets) and that any conflicts with real workarounds are flagged. Bspec: 72161 Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613165314.862029-1-matthew.d.roper@intel.com
-
- 14 Jun, 2022 1 commit
-
-
Matt Roper authored
If we're treating each bit in the EU fuse register as a single EU instead of a pair of EUs, then that also cuts the number of potential EUs per subslice in half. Fixes: 5ac342ef ("drm/i915/pvc: Add SSEU changes") Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220610230801.459577-1-matthew.d.roper@intel.com
-
- 09 Jun, 2022 1 commit
-
-
Matt Roper authored
Ponte Vecchio no longer has MSLICE or LNCF steering, but the bspec does document several new types of multicast register ranges. Fortunately, most of the different MCR types all provide valid values at instance (0,0) so there's no need to read fuse registers and calculate a non-terminated instance. We'll lump all of those range types (BSLICE, HALFBSLICE, TILEPSMI, CC, and L3BANK) into a single category called "INSTANCE0" to keep things simple. We'll also perform explicit steering for each of these multicast register types, even if the implicit steering setup for COMPUTE/DSS ranges would have worked too; this is based on guidance from our hardware architects who suggested that we move away from implicit steering and start explicitly steer all MCR register accesses on modern platforms (we'll work on transitioning COMPUTE/DSS to explicit steering in the future). Note that there's one additional MCR range type defined in the bspec (SQIDI) that we don't handle here. Those ranges use a different steering control register that we never touch; since instance 0 is also always a valid setting there, we can just ignore those ranges. Finally, we'll rename the HAS_MSLICES() macro to HAS_MSLICE_STEERING(). PVC hardware still has units referred to as mslices, but there's no register steering based on mslice for this platform. v2: - Rebase on other recent changes - Swap two table rows to keep table sorted & easy to read. (Harish) Bspec: 67609 Signed-off-by:
-
- 08 Jun, 2022 4 commits
-
-
Matt Roper authored
Another mistake during the conversion to DSS bitmaps: after retrieving the DSS ID intel_sseu_find_first_xehp_dss() we forgot to modulo it down to obtain which ID within the current gslice it is. Fixes: b87d3901 ("drm/i915/sseu: Disassociate internal subslice mask representation from uapi") Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Signed-off-by:
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220607175716.3338661-1-matthew.d.roper@intel.com
-
Matt Roper authored
A new PVC+DG2 workaround has appeared recently: - Wa_16015675438 And a couple existing DG2 workarounds have been extended to PVC: - Wa_14015795083 - Wa_18018781329 Note that Wa_16015675438 asks us to program a register that is in the 0x2xxx range typically associated with the RCS engine, even though PVC does not have an RCS. By default the GuC will think we've made a mistake and throw an exception when it sees this register on a CCS engine's save/restore list, so we need to pass an extra GuC control flag to tell it that this is expected and not a problem. Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
Badal Nilawar <badal.nilawar@intel.com> Signed-off-by:
Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Signed-off-by:
-
Jani Nikula authored
The arrays are static const, but the pointer shouldn't be static. Fixes: 3d832f37 ("drm/i915/uc: Allow platforms to have GuC but not HuC") Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Matt Roper authored
When converting our DSS masks to bitmaps, we fumbled the condition used to check whether any DSS are present in the first gslice. Since intel_sseu_find_first_xehp_dss() returns a 0-based number, we need a >= condition rather than >. Fixes: b87d3901 ("drm/i915/sseu: Disassociate internal subslice mask representation from uapi") Reported-by:
-
- 07 Jun, 2022 2 commits
-
-
Anshuman Gupta authored
i915 must disable Render DOP clock gating globally. v2: - Addressed cosmetic review comments. Bspec: 52621 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Badal Nilawar <badal.nilawar@intel.com> Signed-off-by:
-
Jani Nikula authored
Only the uapi header is required. Signed-off-by:
-
- 03 Jun, 2022 1 commit
-
-
Matt Roper authored
We missed this setting in the initial device info patch's definition of XE_HPC_FEATURES. Signed-off-by:
-
- 02 Jun, 2022 7 commits
-
-
Stuart Summers authored
Our internal teams have identified a few additional engine registers that are worth inspecting in error state dumps during development & debug. Let's capture and print them as part of our error dump. For simplicity we'll just dump these registers on gen11 and beyond. Most of these registers have existed since earlier platforms (e.g., gen6 or gen7) but were initially introduced only for a subset of the platforms' engines; gen11 seems to be where they became available on all engines. Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Signed-off-by:
-
Matt Roper authored
PVC splits the mask of enabled DSS over two registers. It also changes the meaning of the EU fuse register such that each bit represents a single EU rather than a pair of EUs. Signed-off-by:
-
Matt Roper authored
As with EU masks, it's easier to store subslice/DSS masks internally in a format that's more natural for the driver to work with, and then only covert into the u8[] uapi form when the query ioctl is invoked. Since the hardware design changed significantly with Xe_HP, we'll use a union to choose between the old "hsw-style" subslice masks or the newer xehp mask. HSW-style masks will be stored in an array of u8's, indexed by slice (there's never more than 6 subslices per slice on older platforms). For Xe_HP and beyond where slices no longer exist, we only need a single bitmask. However we already know that this mask is eventually going to grow too large for a simple u64 to hold, so we'll represent it in a manner that can be operated on by the utilities in linux/bitmap.h. v2: - Fix typo: BIT(s) -> BIT(ss) in gen9_sseu_device_status() v3: - Eliminate sseu->ss_stride and just calculate the stride while specifically handling uapi. (Tvrtko) - Use BITMAP_BITS() macro to refer to size of masks rather than passing I915_MAX_SS_FUSE_BITS directly. (Tvrtko) - Report compute/geometry DSS masks separately when dumping Xe_HP SSEU info. (Tvrtko) - Restore dropped range checks to intel_sseu_has_subslice(). (Tvrtko) v4: - Make the bitmap size macro check the size of the .xehp field rather than the containing union. (Tvrtko) - Don't add GEM_BUG_ON() intel_sseu_has_subslice()'s check for whether slice or subslice ID exceed sseu->max_[sub]slices; various loops in the driver are expected to exceed these, so we should just silently return 'false.' v5: - Move XEHP_BITMAP_BITS() to the header so that we can also replace a usage of I915_MAX_SS_FUSE_BITS in one of the inline functions. (Bala) - Change the local variable in intel_slicemask_from_xehp_dssmask() from u16 to 'unsigned long' to make it a bit more future-proof. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Signed-off-by:
-
Matt Roper authored
Storing the EU mask internally in the same format the I915_QUERY topology queries use makes the final copy_to_user() a bit simpler, but makes the rest of the driver's SSEU more complicated and harder to follow. Let's switch to an internal representation that's more natural: Xe_HP platforms will be a simple array of u16 masks, whereas pre-Xe_HP platforms will be a two-dimensional array, indexed by [slice][subslice]. We'll convert to the uapi format only when the query uapi is called. v2: - Drop has_common_ss_eumask. We waste some space repeating identical EU masks for every single DSS, but the code is simpler without it. (Tvrtko) v3: - Mask down EUs passed to sseu_set_eus at the callsite rather than inside the function. (Tvrtko) - Eliminate sseu->eu_stride and calculate it when needed. (Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Matt Roper authored
Although gen11 and gen12 architectures supported the concept of multiple slices, in practice all the platforms that were actually designed only had a single slice (i.e., note the parameters to 'intel_sseu_set_info' that we pass for each platform). We can simplify the code slightly by dropping the multi-slice logic from gen11+ platforms. v2: - Promote drm_dbg to drm_WARN_ON if the slice fuse register reports unexpected fusing. (Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Matt Roper authored
Slice/subslice/EU information should be obtained via the topology queries provided by the I915_QUERY interface; let's turn off support for the old GETPARAM lookups on Xe_HP and beyond where we can't return meaningful values. The slice mask lookup is meaningless since Xe_HP doesn't support traditional slices (and we make no attempt to return the various new units like gslices, cslices, mslices, etc.) here. The subslice mask lookup is even more problematic; given the distinct masks for geometry vs compute purposes, the combined mask returned here is likely not what userspace would want to act upon anyway. The value is also limited to 32-bits by the nature of the GETPARAM ioctl which is sufficient for the initial Xe_HP platforms, but is unable to convey the larger masks that will be needed on other upcoming platforms. Finally, the value returned here becomes even less meaningful when used on multi-tile platforms where each tile will have its own masks. Signed-off-by:
-
Matt Roper authored
Xe_HP has enough fundamental differences from previous platforms that it makes sense to use a separate SSEU init function to keep things straightforward and easy to understand. We'll also add a has_xehp_dss flag to the SSEU structure that will be used by other upcoming changes. v2: - Add has_xehp_dss flag Signed-off-by:
-
- 31 May, 2022 2 commits
-
-
Stuart Summers authored
Bspec: 64027 Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220527163348.1936146-3-matthew.d.roper@intel.com
-
Matt Roper authored
For PVC, the base die and compute tile have separate stepping values that we need to track; we'll use the existing graphics_step field to represent the compute tile stepping and add a new 'basedie_step' field. Unlike past platforms, steppings for these components are represented by specific bitfields within the PCI revision ID, and we shouldn't make assumptions about the non-CT, non-BD bits staying 0. Let's update our stepping code accordingly. Bspec: 44484 Signed-off-by:
-
