Silence the following two warnings when make W=1:

  CC      arch/mips/lib/bswapsi.o
arch/mips/lib/bswapsi.c:5:22: warning: no previous prototype for '__bswapsi2' [-Wmissing-prototypes]
 unsigned int notrace __bswapsi2(unsigned int u)
                      ^~~~~~~~~~
  CC      arch/mips/lib/bswapdi.o
arch/mips/lib/bswapdi.c:5:28: warning: no previous prototype for '__bswapdi2' [-Wmissing-prototypes]
 unsigned long long notrace __bswapdi2(unsigned long long u)
                            ^~~~~~~~~~
  AR      arch/mips/lib/built-in.a
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Clean up config files by:
  - removing configs that were deleted in the past
  - removing configs not in tree and without recently pending patches
  - adding new configs that are replacements for old configs in the file

For some detailed information, see Link.

Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

"MIPS: Lantiq: switch vmmc to use gpiod API" patch introduced compile
errors, this patch fixes them.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

All uses of allocate_irqno() have been removed by
commit 69a07a41 ("MIPS: SGI-IP27: rework HUB interrupts"),
so remove the orphan declaration.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

All uses of sb1250_time_init() have been removed by
commit d527eef5 ("[MIPS] Sibyte: Finish conversion to modern
time APIs."), so remove the orphan declaration.

The comments about sb1250_time_init() is useless in arch_init_irq(),
so remove these comments.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This switches vmmc to use gpiod API instead of OF-specific legacy gpio
API that we want to stop exporting from gpiolib.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This patch is needed to handle interrupts by the second VPE on the Lantiq
ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to
the second VPE results in a hang. Currently, the vsmp_init_secondary()
function is responsible for enabling these interrupts. It only enables
Malta-specific interrupts (SW0, SW1, HW4 and HW5).

The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware
interrupts are wired to an ICU instance. Each VPE has an independent
instance of the ICU. The mapping of the ICU interrupts is shown below:
SW0(IP0) - IPI call,
SW1(IP1) - IPI resched,
HW0(IP2) - ICU 0-31,
HW1(IP3) - ICU 32-63,
HW2(IP4) - ICU 64-95,
HW3(IP5) - ICU 96-127,
HW4(IP6) - ICU 128-159,
HW5(IP7) - timer.

This patch enables all interrupt lines on the second VPE.

This problem affects multithreaded SoCs with a custom interrupt controller.
SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware
that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the
future, this may be replaced with some generic solution.

Tested on Lantiq xRX200.
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Clang is especially sensitive about argument type matching when using
__overloaded functions (like memcmp(), etc). Help it see that function
pointers are just "void *". Avoids this error:

arch/mips/bcm47xx/prom.c:89:8: error: no matching function for call to 'memcmp'
                   if (!memcmp(prom_init, prom_init + mem, 32))
                        ^~~~~~
include/linux/string.h:156:12: note: candidate function not viable: no known conversion from 'void (void)' to 'const void *' for 1st argument extern int memcmp(const void *,const void *,__kernel_size_t);

Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: "Rafał Miłecki" <zajec5@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: llvm@lists.linux.dev
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202209080652.sz2d68e5-lkp@intel.comSigned-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

All uses of ar7_cpu_clock, ar7_bus_clock and ar7_dsp_clock were
removed by commit 780019dd ("MIPS: AR7: Implement clock API"),
so remove the orphan declarations, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

All uses of sni_cpu_time_init() were removed by
commit 4b550488 ("[MIPS] Deforest the function pointer jungle
in the time code."), so remove the orphan declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

All uses of free_irqno() and alloc_legacy_irqno() were removed
by commit 69a07a41 ("MIPS: SGI-IP27: rework HUB interrupts"),
so remove the orphan declarations, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

All uses of octeon_hal_setup_reserved32() were removed by
commit 1ef28870 ("MIPS: Octeon: Remove vestiges of
CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB"), so remove the
orphan declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

All uses of cvmx_fpa_setup_pool() were removed by
commit a03822ea ("MIPS: OCTEON: Remove some unused files."),
so remove the orphan declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

All uses of octeon_swiotlb were removed by
commit f39f8d0e ("MIPS/octeon: use swiotlb_init instead
of open coding it"), so remove the orphan declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

All uses of sbx00_acpi_init() in the "pci.c" file were removed by
commit 5831fdb0 ("MIPS: Loongson2ef: clean up loongson64
related code"), so remove the orphan declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

TWD is an MFD block that contains timers, watchdog & some clocks / reset
controller.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

In error case in bridge_platform_create after calling
platform_device_add()/platform_device_add_data()/
platform_device_add_resources(), release the failed
'pdev' or it will be leak, call platform_device_put()
to fix this problem.

Besides, 'pdev' is divided into 'pdev_wd' and 'pdev_bd',
use platform_device_unregister() to release sgi_w1
resources when xtalk-bridge registration fails.

Fixes: 5dc76a96 ("MIPS: PCI: use information from 1-wire PROM for IOC3 detection")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

In error case in bridge_platform_create after calling
platform_device_add()/platform_device_add_data()/
platform_device_add_resources(), release the failed
'pdev' or it will be leak, call platform_device_put()
to fix this problem.

Besides, 'pdev' is divided into 'pdev_wd' and 'pdev_bd',
use platform_device_unregister() to release sgi_w1
resources when xtalk-bridge registration fails.

Fixes: fd27234f ("MIPS: add support for SGI Octane (IP30)")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Rename lantiq dts files with soc name being the prefix, so that the
board dts file can be located easily by soc name, and we also gain
the consistency of naming.

This patch is a preparation for the addition of dts for newer SoCs
(Lantiq ARX100, VRX200 and xRX330).
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Remove the repeated word "as" in comments.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Don't use "/**" kernel-doc notation for comments that are not in
kernel-doc format.

Eliminates one warning:

arch/mips/pci/pci-ar2315.c:6: warning: This comment starts with
  '/**', but isn't a kernel-doc comment. Refer
  Documentation/doc-guide/kernel-doc.rst
    * Both AR2315 and AR2316 chips have PCI interface unit, which supports DMA
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The double `it' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Merge tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Remove unused scripts/gcc-ld script

 - Add zstd support to scripts/extract-ikconfig

 - Check 'make headers' for UML

 - Fix scripts/mksysmap to ignore local symbols

* tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  mksysmap: Fix the mismatch of 'L0' symbols in System.map
  kbuild: disable header exports for UML in a straightforward way
  scripts/extract-ikconfig: add zstd compression support
  scripts: remove obsolete gcc-ld script

Pull arm64 fixes from Will Deacon:
 "Three small arm64 fixes, all related to optional architecture
  extensions: BTI, SME and 52-bit virtual addressing:

   - Disable in-kernel BTI when compiling with GCC, as it makes invalid
     assumptions about the distance between functions which has led to
     crashes when calling modules on a CPU with BTI support

   - Remove bogus TIF_SME flag management if memory allocation fails in
     the ptrace code

   - Fix the resume path when configured for 52-bit virtual addressing"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: fix resume for 52-bit enabled builds
  arm64/ptrace: Don't clear calling process' TIF_SME on OOM
  arm64/bti: Disable in kernel BTI when cross section thunks are broken

Pull i2c fixes from Wolfram Sang:
 "Only documentation and DT binding fixes and improvements"

* tag 'i2c-for-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  dt-bindings: i2c: renesas,riic: Fix 'unevaluatedProperties' warnings
  docs: i2c: piix4: Fix typos, add markup, drop link
  docs: i2c: i2c-topology: reorder sections more logically
  docs: i2c: i2c-topology: fix incorrect heading
  docs: i2c: i2c-topology: fix typo

Pull iommu fixes from Joerg Roedel:

 - Intel VT-d fixes from Lu Baolu:
     - Boot kdump kernels with VT-d scalable mode on
     - Calculate the right page table levels
     - Fix two recursive locking issues
     - Fix a lockdep splat issue

 - AMD IOMMU fixes:
     - Fix for completion-wait command to use full 64 bits of data
     - Fix PASID related issue where GPU sound devices failed to
       initialize

 - Fix for Virtio-IOMMU to report correct caching behavior, needed for
   use with VFIO

* tag 'iommu-fixes-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Fix false ownership failure on AMD systems with PASID activated
  iommu/vt-d: Fix possible recursive locking in intel_iommu_init()
  iommu/virtio: Fix interaction with VFIO
  iommu/vt-d: Fix lockdep splat due to klist iteration in atomic context
  iommu/vt-d: Fix recursive lock issue in iommu_flush_dev_iotlb()
  iommu/vt-d: Correctly calculate sagaw value of IOMMU
  iommu/vt-d: Fix kdump kernels boot failure with scalable mode
  iommu/amd: use full 64-bit value in build_completion_wait()

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix for loongson32 starup hang

 - fix for octeon irq setup problem

 - fix compiler warning for new CONFIG option

 - switch to SPARSEMEM_EXTREME for all platforms selecting SPARSEMEM

* tag 'mips-fixes_6.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: Select SPARSEMEM_EXTREME
  MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()
  MIPS: octeon: Get rid of preprocessor directives around RESERVE32
  MIPS: loongson32: ls1c: Fix hang during startup

The AMD IOMMU driver cannot activate PASID mode on a RID without the RID's
translation being set to IDENTITY. Further it requires changing the RID's
page table layout from the normal v1 IOMMU_DOMAIN_IDENTITY layout to a
different v2 layout.

It does this by creating a new iommu_domain, configuring that domain for
v2 identity operation and then attaching it to the group, from within the
driver. This logic assumes the group is already set to the IDENTITY domain
and is being used by the DMA API.

However, since the ownership logic is based on the group's domain pointer
equaling the default domain to detect DMA API ownership, this causes it to
look like the group is not attached to the DMA API any more. This blocks
attaching drivers to any other devices in the group.

In a real system this manifests itself as the HD-audio devices on some AMD
platforms losing their device drivers.

Work around this unique behavior of the AMD driver by checking for
equality of IDENTITY domains based on their type, not their pointer
value. This allows the AMD driver to have two IDENTITY domains for
internal purposes without breaking the check.

Have the AMD driver properly declare that the special domain it created is
actually an IDENTITY domain.

Cc: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Fixes: 512881ea ("bus: platform,amba,fsl-mc,PCI: Add device DMA ownership management")
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-ea566e16b06b+811-amd_owner_jgg@nvidia.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The global rwsem dmar_global_lock was introduced by commit 3a5670e8
("iommu/vt-d: Introduce a rwsem to protect global data structures"). It
is used to protect DMAR related global data from DMAR hotplug operations.

The dmar_global_lock used in the intel_iommu_init() might cause recursive
locking issue, for example, intel_iommu_get_resv_regions() is taking the
dmar_global_lock from within a section where intel_iommu_init() already
holds it via probe_acpi_namespace_devices().

Using dmar_global_lock in intel_iommu_init() could be relaxed since it is
unlikely that any IO board must be hot added before the IOMMU subsystem is
initialized. This eliminates the possible recursive locking issue by moving
down DMAR hotplug support after the IOMMU is initialized and removing the
uses of dmar_global_lock in intel_iommu_init().

Fixes: d5692d4a ("iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices()")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/894db0ccae854b35c73814485569b634237b5538.1657034828.git.robin.murphy@arm.com
Link: https://lore.kernel.org/r/20220718235325.3952426-1-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Pull s390 fixes from Vasily Gorbik:

 - Fix absolute zero lowcore corruption on kdump when CPU0 is offline

 - Fix lowcore protection setup for offline CPU restart

* tag 's390-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/smp: enforce lowcore protection on CPU restart
  s390/boot: fix absolute zero lowcore corruption on boot

Merge tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix severe regression in asus-ec-sensors driver
   which resulted in EC driver failures

 - Fix various bugs in mr75203 driver

 - Fix byte order bug in tps23861 driver

* tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (asus-ec-sensors) autoload module via DMI data
  hwmon: (mr75203) enable polling for all VM channels
  hwmon: (mr75203) fix multi-channel voltage reading
  hwmon: (mr75203) fix voltage equation for negative source input
  hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used sensors
  hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined
  dt-bindings: hwmon: (mr75203) fix "intel,vm-map" property to be optional
  hwmon: (tps23861) fix byte order in resistance register

Pull dma-mapping fixes from Christoph Hellwig:

 - revert a panic on swiotlb initialization failure (Yu Zhao)

 - fix the lookup for partial syncs in dma-debug (Robin Murphy)

 - fix a shift overflow in swiotlb (Chao Gao)

 - fix a comment typo in swiotlb (Chao Gao)

 - mark a function static now that all abusers are gone (Christoph
   Hellwig)

* tag 'dma-mapping-6.0-2022-09-10' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: mark dma_supported static
  swiotlb: fix a typo
  swiotlb: avoid potential left shift overflow
  dma-debug: improve search for partial syncs
  Revert "swiotlb: panic if nslabs is too small"

__cpu_setup() was changed to take the actual number of VA bits in x0,
however the resume path was not updated at the same time.

Load `vabits_actual` in the resume path, to ensure that the correct
number of VA bits is used.

This fixes booting v6.0-rc kernels on my Juno.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Fixes: 0aaa6853 ("arm64: mm: fix booting with 52-bit address space")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220909124311.38489-1-joey.gouly@arm.comSigned-off-by: Will Deacon <will@kernel.org>

Pull SCSI fixes from James Bottomley:
 "Eight patches which looks like quite a large core change, but most of
  the diffstat is reverting the attempt to rejig reference counting
  introduced in the last merge window which caused issues with device
  and module removal.

  Of the remaining four patches, only the fix use-after-free is
  substantial"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpt3sas: Fix use-after-free warning
  scsi: core: Fix a use-after-free
  scsi: core: Revert "Make sure that targets outlive devices"
  scsi: core: Revert "Make sure that hosts outlive targets"
  scsi: core: Revert "Simplify LLD module reference counting"
  scsi: core: Revert "Call blk_mq_free_tag_set() earlier"
  scsi: lpfc: Add missing destroy_workqueue() in error path
  scsi: lpfc: Return DID_TRANSPORT_DISRUPTED instead of DID_REQUEUE

When System.map was generated, the kernel used mksysmap to filter the
kernel symbols, we need to filter "L0" symbols in LoongArch architecture.

$ cat System.map | grep L0
9000000000221540 t L0

The L0 symbol exists in System.map, but not in .tmp_System.map. When
"cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms
data" error message in link-vmlinux.sh script.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>